Satellite P10 - trouble with grafic adapter

Hi,
When starting my Satellite P10 - 554 today, the display showed unsorted colored pixels all around the screen. The BIOS message appears fully normal. After booting into the graphical mode, starting windows XP, the screen keeps being black.
The hard disk works fine. I've checked the display. It's working fine.
I guess the graphic adapter (geforce go 5600) is damaged. Any chance getting my notebook fixed? Do I need a new mainboard, or is there any possibility replacing the graphic adapter? Where can I get the needed parts, used or unused? What do the "exchange parts" cost? Better buy a new notebook?
Thanks a lot for your help.
Steven from Germany, Duisburg.

Hi
>Any chance getting my notebook fixed? Do I need a new main board, or is there any possibility replacing the graphic adapter? Where can I get the needed parts, used or unused? What do the "exchange parts" cost? Better buy a new notebook?
Are you 100% sure that the graphic card is dead? This can be checked very easily.
You could connect the external monitor to the notebook and could check if the same appears on the external monitor too. If the same fault would appear on the external monitor then the GPU could be really faulty.
In such case the whole motherboard must be changed and such procedure costs a little fortune because the motherboard is on of the expansive notebook parts. You should calculate 300-350 euro
So maybe an second hand board could be a alternative.
greetings

Similar Messages

  • Satellite A200 - Problems with AC adapter

    Hi,
    The problem concerns an Satellite A200 (PSAF6A-02H01N).
    Recently there has been problems with the Laptop taking several attempts to start up Vista, it would lock up while loading or just crash and freeze just after loading Vista.
    But Once it was up and running the laptop would happily work for hours with the AC adapter plugged in.
    The problem has now got worse and the laptop will not finish loading Vista without crashing.
    We have now narrowed the it down to only having a problem when the AC power adapter is plugged in.
    The Laptop battery will charge normally with the AC adapter plugged in and the Laptop in standby or switched off.
    The problem still exists with the AC adapter plugged in and the battery removed.
    The notebook will start up and run perfectly with the battery in and no AC adapter connected. Once the AC adapter is plugged in the Laptop will show that the battery is charging then after a few seconds it will crash or freeze and the only escape is a complete shutdown.
    The laptop will only run under battery power for about 30mins max.
    I have checked the Voltage output of the AC adapter and this appears to be a consistant 19.4 Volts.
    Is it just an AC adapter problem or does the problem lie with the laptop?
    Thanks in advance..
    Gaz.

    Crashing/BSOD's can be caused by many things. The first thing to do is check the RAM and HDD for problems.
    Test the RAM for errors. You can use the free Memtest utility:
    1) Go to http://www.memtest.org/#downiso and download the "Pre-Compiled Bootable ISO (.zip)"
    2) Open the ZIP file and extract the ISO file to a temporary folder.
    3) Burn the ISO to a blank CD using an "Image-to-Disc" or "Bootable CD" project in your CD/DVD burning software (dont use a normal Data Project).
    4) Insert the Memtest CD into your laptop and turn it on, press F12 to launch the boot menu, and select "CD".
    Test the Hard Disk for errors by using DFT.
    DFT Download: http://www.hitachigst.com/hdd/support/download.htm#DFT
    Download the ISO File and burn it to a CD-R Disc (There is also a Floppy Disk version if that's easier).
    If you dont know how to burn an ISO file, read this guide: http://www.petri.co.il/how_to_write_iso_files_to_cd.htm
    Restart your laptop and boot from the DFT Disc.
    Choose the "Advanced" Test and let it run (it may take an hour or so).
    If you see a red message box, the HDD is faulty.
    An error code 0x70 means there are bad sectors and the HDD needs replacing.

  • Satellite C850D - troubles with display driver

    Hey everyone
    I'm having some trouble trying to find the video drivers for my Toshiba Satellite C850D.
    Have tried direct download from Toshiba and AMD website and nothing works (catalyst 12.6).
    Any help on this would be appreciated.

    Hi
    I could find the graphic card driver for the Satellite C850D on the Toshiba European driver page:
    http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
    Choose:
    - Notebook
    - Satellite
    - Satellite C series
    - Satellite C850D
    - Display driver
    The drivers were uploaded 16.07-18.07 2012
    You can find the versions: 8.942-120213a-133550 and 8.932.5.3-120120a-13 for Win 7 64bit and 32bit

  • Satellite A210 -trouble with brightness in WXP

    Hello all!
    My problem:
    Satellite A210-1ap + WinXP SP2 + bios 2.0 WinAll - not working Fn+F5,F6...
    Then I setup common module, Im receive error that my OS is not supported
    How to fix this problem?

    The A210-1AP belongs to the *PSAELE* series.
    The Toshiba European driver page DOESNT provide the Win XP Common Modules for this notebook series.
    I assume you used Common Module which is NOT designed for this notebook.
    So I dont wonder that you cannot install it.

  • When I plug my iPad into a wall circuit and leave it for 18 hours the battery level only goes from 55% to 66% and then it quotes charging. Is this normal or do I have trouble with my adapter, it is the one that came with the iPad?

    When I plug my Ipad into a wall circut it will not fully charge, It only charges up to 66% does anyone no why?

    I can't tell you why it is doing this but it should not take anywhere near that long to recharge.
    Try another power adapter if you have access to one - borrow one from a friend, try another wall socket, another cable ... take it to an Apple Store and let them try to charge it for you.
    You can try resetting the iPad and see if that helps but I have my doubts - but it will not hurt anything either.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Your battery gauge may be giving you an incorrect reading - but I think that would be a long shot as well. How many hours of use do you get at 66%?
    You can read this about the iPad battery and how to maintain and care for the battery. .
    http://www.apple.com/batteries/ipad.html
    This copied from the site
    Use Your iPad Regularly
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    Message was edited by: Demo

  • CS5 Photoshop troubles with grafic board Nvidia GeForce 8500 GT

    I am using a Nvidia GeForce 8500 GT grafic board and Windows Vista. Also I have downloaded the newest driver from the Nvidia Website
    and installed it correctly. After having started up Photoshop CS5 the first time, it all works perfectly. Also when I close the program and restart it, no problems occure.
    If I then restart my computer, start up the Photoshop CS5 Software and open a picture from an existing file, the image cannot be displayed on the screen. Also if I start a new file (click on file - new - ...) the white drawing map is not displayed. The only thing I see is the grey background color as well as the rulers. The thumbnail of the opened image or the white drawing map is displayed within the navigator window normally and there are no error messages at all.
    If I now reinstall the NVIDIA driver, restart my computer and start up Photoshop CS5, it again works all perfectly. So to run Photoshop CS5 on my computer, I need to install the already installed NVIDIA driver after every reboot.
    Maybe there is a solution in changing the VRAM settings within Photoshop?

    You may be able to run without OpenGL, but there are some nice features you'll be missing.
    Take Zeno's advice.
    -Noel

  • Satellite A660 - troubles with Wi-Fi and keyboard

    Hi everyone,
    I bought this Satellite A660 3yrs ago. I found the Wi-Fi no work suddenly half year ago. I tried to use fn+f8, it show that "Wireless communication is disabled. Please turn on communication switch".
    Then I had to use LAN connectivity.
    Other problem appeared 3 weeks ago, the keyboard cannot work correctly.
    When I start Windows and use mouse click a item or document, many items or documents will be selected, look like press 'shift' at the same time.
    And press keyboard, just appear capital letters and number, cannot use "@#%&*(" etc. if just use fn+num lock, it dont change anything.
    If I use fn+f1 firstly ,then go back windows, then use fn+num lock, and mouse and keyboard are good.
    I tried to reinstall VAP and WLAN, reset BIOS to default, it was not useful. I use recovery os today, but the problem is still there, no Wi-Fi, no good mouse and keyboard. I have no idea now.
    Please help
    Sorry for my English

    Hi
    Regarding the keyboard issue:
    I think you should connect the external USB keyboard. In case the external keyboard would work properly, the problem is related to your internal keyboard and this need to be replaced.
    Regarding the WLan issue:
    >Wireless communication is disabled. Please turn on communication switch"
    I found an solution on the Toshiba US page:
    [Satellite A665- "Wireless Communication is Disabled. Please Turn On the Wireless Communication Switch|http://support.toshiba.com/support/viewContentDetail?contentId=2782704]
    The Satellite A665 is very similar to the European A660 series and the solution is to enable wireless communication, press the Wireless Antenna ON/OFF button located on the System Indicator Panel above the keyboard. Once the Wireless Antenna is ON, you can use the FN+F8 keys to turn wireless on.

  • Troubles with the creation of New Custom Adapter for NW 7.1

    Hi guys !!!
    I have some troubles with the creation of a new custom adapter for NW 7.1. I have followed some pdf and notes, like :
    [Upgrade an SAP NetWeaver PI 7.0 Adapter to SAP NetWeaver PI 7.1|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0667f56-96c7-2b10-0e9a-c40fbd523f4d]
    note : 1004000
    I have all the materials to make the custom Adapter ( like file .sca with all .rar and .sda , like file sample_ra.rar with all the file .java, like all the libs for the projects ) and I have make it !!! But, when I try do deploy it, i recieve a warning that i don't understand, this is the warning :
    S U M M A R Y
    ~~~~~~~~~~~~~~~~~~~
    Successfully deployed:           0
    Deployed with warnings:           1
    Failed deployments:                0
    ~~~~~~~~~~~~~~~~~~~
    1. File:C:Users
    maienzaDesktopCreazione del SDAPI71_AF_myFirstCustomAdapter_ver_2.0.sda
         Name:PI71_AF_myFirstCustomAdapter_ver_2.0
         Vendor:sap.com
         Location:SAP AG
         Version:7.1007.20090310105326.0000
         Deploy status:Warning
         Version:NEW
         Description:
              1. Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
    No one of the [EJBContainer] containers, which processed it, returned deployed component names.
    The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
    Possible reasons :
         1.An AS Java service, which is providing a container, is stopped or not deployed.
         2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
         at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
         at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
         at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
         at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Result
    Status:Warning
    I have see in the nwa if there are some applications or services that are stopped but all the necessary it's started, just one question : in the pdf for upgrade from 7.0 to 7.1 no one speaks about ejBean or about a creation of it ... it's necessary an ejBean ?? Beacause in the file .sda of the file .sca that i have downloaded there are more of the adapter with ejBean ....
    Antonello

    Hi,
    the adapter metadata it's been created but my service is still stopped; when I try to start it, in the NDWS -> Deploy view -> tab Repositary view, I receive this errors, one after the other, cause I try to start it 3 times and in each time I received 3 differents errors :
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
         at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
         at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
         ... 30 more
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
         at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
         at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
         ... 30 more
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
    No one of the [EJBContainer] containers, which processed it, returned deployed component names.
    The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
    Possible reasons :
         1.An AS Java service, which is providing a container, is stopped or not deployed.
         2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
         at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)

  • Satellite L755-16J - Trouble with sound card

    I currently own a Toshiba *Satellite L755-16J* and it is having some sort of trouble with the sound card, i think.
    When i bought it, it came with windows 7, i changed the windows to windows 8 and since then the audio has been troubling me.
    The internal speakers work for a minute or two when i play an audio file but then stop working.
    i had been using an external usb soundcard and external speakers for some time but decided to switchback to windows 7 for the sound to work properly again. even though i have switched back to win 7, the sound still doesnt work.
    I am quite sure that the problem is not in the internal speakers because they do work, although just for a brief moment but they work, so i am guessing the problem is in the software instead of the hardware.
    i tried updating the sound drivers but they seem to be up to date, according to windows the drivers "seem to be working properly"
    Can anyone help?

    > even though i have switched back to win 7, the sound still doesnt work.
    How did you do that?
    Did you use the Toshiba Recovery Disk in order to install Win 7 or did you install the Win 7 using fresh and clean Windows 7 disk?
    The notebook supports Conexant sound chip. The sound driver is available on the Toshiba EU driver page and in case the sound chip is already recognized in device manager after the sound driver installation, I assume the driver has been installed properly.
    In such case I would recommend you to connect the headphones.
    In case the headphones would function properly, the speakers might be affected. I mean the hardware. But of course its only an idea.
    Beside the headphone check, you could check also the settings within the control panel -> sound -> playback tab.
    Usually the speakers should be set as default device.
    Check this option too.

  • Satellite 5100/201: trouble with video card or overheat?

    Hy,
    I'm experiencing trouble with video on a Satellite 5100/201. It seems that when I press on the left side above the graphics card or press a key on the keyboard on that side, the screen starts to be scrambled and vertical lines appear. At the end windows XP resets giving a critical error on the device and the video passes to 640x480. Same thing occurs when running Linux Suse 9.0.
    My doubt is what is the cause: the graphics card corrupted or overheating due to the fan not as efficient as originally (my laptop is almost two years old. Did someone succed in finding the cause and resolved the problem, also with the Toshiba assistance?
    Any help welcome.

    Hi,
    I don't think so that Toshiba has problems with the design. You are talking about two different models with two different hardware and for different user profiles!
    The 1900 is a Desktop replacement notebook with "desktop" components like processors and the Satellite 5000 is a Multimedia notebook!
    Hint: If you had not done it yet, perhaps you could install the graphic card driver once again. If this don't helps, it is the best way to recover the notebook with the Toshiba CD. (this set the notebook to software default settings and the notebook should be work)
    Bye Bob

  • Trouble with Benq DC C 700 digital camera on Satellite L30 105

    Hello
    I'm having trouble with my digital camera when I connect it to my laptop. Every time I connect the camera the laptop freezes and gives me the blue screen of death, that is, the screen you get when a fatal error occurs, and then my laptop has to be rebooted. So this happens each and every time I connect the two.
    I've tried updating the bios and installing the latest drives but nothing seemed to work. I've contacted the support center at Benq and they told me to contact Toshiba as they are pretty sure the problem is not with the camera. So please anyone, if you have any ideas and or suggestions/solutions I'll be glad to hear them out.
    Thanks!

    Hi
    First of all if you need the Toshiba support you have to contact the Toshiba authorized service partner in your country. This forum here is only a user-to-user forum and you will not find anyone from Toshiba here.
    Secondly;
    It seems the Satellite L30-105 was delivered with Vista. Do you use this OS on the L30?
    I have read about many issues with the 3rd party devices, software and Windows Vista.
    I dont know what the guys told you but possibly the webcam software is not 100% compatible with Vista.
    You should know that the BSOD appears if there is a serious software or hardware problem. I dont think that this issue was caused by a hardware problem and therefore there is only one possibility; software compatibility issue.
    In you case I would update the Vista to the latest state and would ask the webcam manufacture if its 100% compatible with Vista.
    Good luck

  • Trouble with Satellite A205-SP5814

    I'm having some trouble with my laptop, it's a Satellite SP-5814, and it freezes sometimes. I installed the factory software from the CD's, and the problem didn't solved at all. Sometimes even can't load de OS, or crashes trying. I'll appreciate any answer or solution to this problem, because the Toshiba Certified Technical Support from my country (Costa Rica) couldn't solve the problem (they installed the factory software). I don't know why my computer doesn't appear on the supported one's list, because I can't even update the BIOS.

    By installing factory software, do you mean that they did a complete recovery to factory settings, erasing your data rfom the computer and returning it to out-of-box conditions? If so, and if you're encountering problems immediately after doing so, I'd recommend getting the notebook serviced.
    - Peter

  • Im having trouble with my magsafe L adapter, i just bought my macbook pro around october-november 2011. just wondering if their still gonna replace it though i lost my receipt already. can i buy just the wire, i mean the "L" not the whole charger?

    im having trouble with my magsafe L adapter, i just bought my macbook pro around october-november 2011. just wondering if their still gonna replace it though i lost my receipt already. can i buy just the wire, i mean the "L" not the whole charger?

    Punch the computer's serial number here and check your coverage:
    https://selfsolve.apple.com/GetWarranty.do

  • Satellite C850D-B600 - troubles with AMD Radeon HD 7310 Graphics

    Hi,
    I have laptop Toshiba Satellite C850D-B600 with AMD Dual-Core Processor E1-1200 CPU with AMD Radeon™ HD 7310 Graphics
    I tried the last version in the official site and I tried AMD Official Site and I got massage says (the version of your graphics adapter is not supported) and when I tried to install Toshiba driver the graphic card does not work too.
    When I tried to open AMD vision engine control centre I got this massage says (AMD vision engine control center cannot be started there are currently no settings that can be configured using AMD vision engine control center).
    Please could you help me :(

    Hi
    May I ask you what system did you install and what driver did you try to install from Toshiba driver page?
    It seems that this notebook Satellite C850D-B600 was released without any preinstalled Windows system and therefore it would be useful to know what system you are using.
    You should also know that the Radeon HD 7310 graphic is a part of CPU. Yes, this is not external graphic unit but its intergraded in CPU.
    Regarding the AMD vision engine control center
    >AMD vision engine control center cannot be started there are currently no settings that can be configured using AMD vision engine control center
    The AMD Vision Control Center offers additional CPU monitoring options from within the Control Center. I think the above message appears because there are no settings which could be configured. But this does not mean that the driver would not work.

  • What internal DVD+/-RW will work with my Satellite P10-304

    Can anyone give me an answer to what internal DVD+/-RW will work with my Satellite P10-304.
    I've been told a SDR-6012 or a UJ-820 DVD+/-RW might work.
    Please help
    Thanks
    Lee

    Hi
    Did you check the user manual of the P10 Satellite?
    Sometimes the compatible CD/DVD drives can be found in the user manual which should be installed on your notebook.
    If you dont have the user manual then you could download it from the Toshiba page.
    However, if you will not find the right info in the user manual then I would recommend contacting the ASP in your country for details.
    Usually you could order a supported drive from these guys.
    Its important that you know what drives are compatible due to the different master\slave\c-sel settings.
    Bye and good luck

Maybe you are looking for

  • MSI P67A-GD55 Blue Screen at Shut Down or changing users

    Blue Screen happens at shut down, not always, sometimes frequently but later stabilizes for a while.  Computer is stable when it is working, not sudden blue screen, only happens at shutting down. Configuration MSI P67A-GD55 B3 INTEL Core i5 2500 3.3

  • Paying company code

    Hello All,    Has anybody here used Paying Company codes? I have two company codes 3000 and 9123. The Paying company code for 9123 is 3000 (this can be setup in transaction FBZP->All company codes). I created two Non-PO invoices (FB60) for each compa

  • How to disable Photoshop Elements 4.0 from opening up.

    Hi all, just wanted to thank all of you for answering my two other questions I had. My question now is when I start up Photoshop Elements 4.0 up it goes through alot of info before it actually opens up to view my pic's. Is there a way to just open my

  • Iphoto 4.0.3 no  longer recognizes my Casio camera

    iPhoto 4.0.3 no longer recognizes my Casio. It says no camera selected. Apple Help couldn't "help". Any solutions our there?

  • Hp pavilion dv7-4177nr boot up with black screen

    I have laptop listed above. For the past 3 days I hasn't not been able to get it in. it sounds like its starting but the screen stays black. Recently installed antivirus on 01/01/2012 because I had some kind of worm/malware. Windows 7 is the OS. Cap