Satellite P10: Which Wifi card will fit?

HI
Im looking to fit a mini pci wifi card to my P10
model PSP10E-0RCJM-EN trouble is I don,t know which type will fit I seen several cards offerd that involve doing away with the wifi on off switch I would prefer to keep this feature so need to know what cards support it prefer a 54g card if poss.

Hi
I have found that wireless card with part number PA3212U-3MPCR is the right one for your notebook. The problem is that this card is IEEE 802.11b with 11Mbps data transfer rate.
I don`t know which one with standard g will fit to your notebook. The best solution is to contact service partner. I am pretty sure that they have this kind of information.

Similar Messages

  • Which WiFi card for: PowerMac G5 Tower, 1.8 Ghz DP, running OS 10.5.8?

    Sorry, I couldn't find an answer to this on the forum and the PDFs ref where the card WOULD fit didn't resemble the inside of the Mac I have
    It's an ex-work machine that I'd like to make Wifi for a non-techie friend (already have DLink router for existing PC etc) Which wireless card do I need and which is better? I've been told about USB dongles, Airport Extreme and PCI antenna cards. All very confusing. Basically it needs to be reliable for the non-techie owner , so am not keen to get a cheapo card that will need lots of setting up. Plug 'n' play would be good.
    I think the Mac is 2004 vintage and is definitely G5, 1.8 Ghz Dual Processor. Any help asap would be appreciated as I've got to get a card and install it all by the weekend.
    Many thanks,
    Andy

    Hi Andrew, Not sure which card, but it may be easier or even cheaper with some of these alternatives...
    http://eshop.macsales.com/item/Edimax/EW7728IN/
    http://eshop.macsales.com/item/Newer%20Technology/MXP802NU2C/
    http://eshop.macsales.com/item/Newer%20Technology/MXP802GU2/
    http://eshop.macsales.com/item/Asus/WL167G/
    I havent tried the first one, but the other 3 work better than any Airport card I have.

  • Which graphics card can fit in my HP 500-201IN?

    Can you please provide a list of graphics card which will fit in my stock HP 500-201IN with stock case and stock PSU?

    Good morning,
    The following link shows the specs of your computer:
        http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c04168140#N90
    1. Yes, you can upgrade to 500W PSU, please check power connectors first,
    2. No, as the above specs, there is ONLY one slot for one video card on the motherboard.
    3. Pass, I don't buy and sell computer cases.
    Have a good weekend.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Question-Nokia 2610 SIMM card will fit in........?...

    My GF has a pay as you go-Mobile 2610 I bought her. I'd like to find another phone that's T-Mobile and might be able to adjust the sound better so she can hear. She refuses to use an ear bud so that's not an option.
    I changed out my Moto V300 for a V195s without a camera (Workplace rules, no cameras) and as a bonus it turns up loud enough she can hear. But with pay as you go she's running down MY minutes and I need it for work calling me in.
    I've been unemployed mostly for over a year but if I knew a better phone the SIMM card would fit in I could buy one off Ebay.
    Phone stores and T-Mobile are useless. Their motivation is to sell you a new contract or a expensive brand new phone, not replace the ancient model with a used one.
    Anyone know what the SIMM from this model will fit in that's also a T-Mobile phone or compatible with the network?
        I'm sue there are tons of much nicer, great phones out there but they involve T-Mobile and they want to sign you to another contract or sell you a full retail price phone which I can't afford.  TIA

    Sim cards are universal for all phones of whatever brands or models. The only things you have to consider is whether the phone you're buying is locked or not to a particular network.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Satellite P10-804 wireless card upgrade

    Hi,
    Ive been trying to find a list of compatible wireless cards to upgrade my Satellite P10-804 but can't find any.
    The the current wireless card is a Toshiba PA3171U-1MPC but it doesnt do the 802.11G standard and no WPA security.
    Anyone know of what are good replacement cards that will work on my laptop?
    Ive come across this one but Im not sure if it is compatible or not as I can't find any compatibility info for it: PA3416U-1MPC
    Thanks,
    Mark

    Hi
    I think the PA3416U-1MPC should be compatible.
    I mean the notebook supports the miniPCI Wlan card and the PA3416U-1MPC is a miniPCI Wlan card.
    The WLan antenna behind the notebooks screen should be connected to the connectors placed on miniPCI WLan card.
    The two connectors are marked with MAIN and AUX. Normally a white cable goes to the MAIN and a black to the AUX
    bye

  • New WIFI card will NOT connect correctly.

    Hi,
    I just purchased a Gigafast WF748-CUI wireless card for my iMac G3 running Mac OS X Tiger (10.4.10) and I followed the instructions exactly and did everything right but it will NOT connect. It keeps generating these weird IP addresses beginning with 168. but my networks IP address begins with 192. I had the same problem with my previous WIFI card on the iMac but it would work eventually. I have been messing with this one for like 2 hours and it has shown no sign of working. I even entered a manual IP address in but still nothing. The program for the wireless card says its connected but it is not (or isnt connected to the right IP anyway). What do I do?

    Sooo, there's no way the CP has to "Join" a Network? Just says you're connected to 169.x.x.x?
    Might try making a New Location in Network CP, turn off all other Ports, the set the IPv4 settings to Manually...
    IP: 192.168.0.5
    Subnet Mask: 255.255.255.0
    Router: 192.168.0.1
    Assuming the Router is 192.168.0.1, but change the 2nd & 3rd digits accorcdingly.

  • Which graphics card will my MBP be using in bootcamp?

    Hey guys I'm considering installing bootcamp on my MBP. It has Intel HD4000 and Nvidia gt 650m. I was wondering which graphics card it would be using in bootcamp. THanks

    Windows will only use your dedicated graphic card, in this case, the NVIDIA GeForce GT 650M, because the integrated graphic card can't be used (there are problems with the GPU switch in Windows).
    After installing Windows, install the most recent driver for your GPU from the NVIDIA site > http://www.nvidia.com

  • [p7-1240] How can I tell which graphics cards will work with my motherboard?

    I recently went through the nightmare of trying to install a Gigabyte GTX 650 in my PC. After a few days of struggling and scouring the internet for answers, I discovered that it is incompatible with the BIOS on my motherboard, and HP does not offer BIOS updates. I returned the card and am now looking for a new one, but I am unsure of which cards will work now, since my computer met all of the system requirements for the graphics card, and It stil ldid not work. Since GPU manufacturers do not list BIOS specs under system requirements, how can I tell if a graphics card will work with my sytem?
    My computer is a p7-1240 with an upgraded 520W PSU and approximeately 11" of room to install the card.
    This question was solved.
    View Solution.

    Thexn, welcome to the forum.
    The problem is, many of the newer video cards require the computer to have a full UEFI BIOS.  HP began using one in mid-October, 2012.  Before this date the BIOS is Legacy.  This is why the video card didn't work with your computer.
    I don't know what you want to spend for a card, but MSI makes a GTX 750ti that has a hybrid VBIOS.  It has a switch to change to Legacy or UEFI.  There is a video link directly below the picture of a card.  Paul from Newegg gives a full description of the card.
    I like EVGA cards the best.  Their Tech Support has given me a lot of information about their cards.  However, you have to go back to a GT 640 card to find one of their cards that doesn't require the UEFI BIOS.  They do have some updates for their BIOS'es that solve the problem, but you have to call them for the exact cards.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Which WiFi cards can be installed in the X121e (AMD E-350 Version)?

    Hi,
    I'm running Linux and the available firmwares for the RealTek rtl8818ce in the X121e with AMD processor is hopeless, so I've though about replacing the card. Now apparently the BIOS has some sort of card-whitelist so the question is with which cards can I replace the RealTek?

    To check the compatible wifi cards you would want to check the hardware maintainence manual of your machine.
    http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CCUQFjAB&url=http%3A%2...
    The pther way which is not recommende is to flash the bios to a unofficial version which would allow any hardware installed in your laptop.
    Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
    If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

  • Which silicone case will fit new ipod 160gb?

    which silicone case is currently available and will fit new ipod classic160GB?  Is the size compatible with any previous ipod model?

    It has a dock connector so it should play music fine. But the new iPods only charge on 5 volts (the older ones could charge on 5 or 12). If your speakers charge with 12 volts they will not charge the new iPods.
    A lot of devices charge at 12 volts (even Apples own Hi-Fi) but most companies seem to be keeping this secret, if you are lucky there will be an FAQ on the company website that will tell you if it's compatible with the iPhone G3 (the first 5v only device).

  • Satellite P10-304: WLan card replacement - Do I need the same Wlan chip?

    Hi all,
    got a satellite P10-304 from a mate here.
    He said the wireless has never worked on it and hes had it years and someone else has already looked at it and changed the wireless card TNA.
    Basically it just acts as if the wireless switch isn't working and it stays permanently off although the drivers install fine and the card shows as ok. Just disconnected.
    Now I thought, ok, i'll take a look as I'm pretty good on the old hardware. Took it apart and what do you know, the switch was bent and not in place. I put the switch back into place, checked in the on and off positions with a multimeter to check the switch was working and it was doing its job perfectly.
    Now it still does not work.
    I am guessing this is now due to the fact that as I said, the card has been changed from its original to an intel pro jobby.
    My question is, am I right, do I just need to get the same card that was originally in it. I assumed that when the switch was put back correct I would have it solved.

    Hi
    The WLan card should be enabled bu switching the switch to ON position (the LED should light up) and additionally you should chose the WLan antenna using the key combination FN + F8.
    Please check this!
    Note; go to device manager -> Wlan card properties -> Advanced tab
    There you can check if WLan is enabled as well.

  • Which DVD drvies will fit into the Mac Pro?

    I have two DVD drives from my PC that will not open and close in the mac pro due to the tray being about 1mm to low.
    I have removed the front bezels off the drives but they are just a bit too low.
    The drives are:
    Sony dw-d18a and Sony dw-Q28a
    Anyone know some drives that will fit?

    The simplest is to match the OEM drives that Apple are using. I know that they use the Pioneer DVR-111D as well a Sony model. Just a search in these forms will give you a specific model.

  • Which Video Card will Work out of Box with P7-1240 Desktop with Win 7-64bit & AMD A10-5700 CPU?

    Hi Folks,
    I'm new here and have already searched for solutions.  I have P7-1240 Desktop purchased new in June 2012 with Jasmine MSI-MS-7778 motherboard, AMD A10-5700 quad core, 10 MB ram and Windows 7 64-bit.  I'm trying to install a graphics board so my son can play some games that he currently must play on low resolution using the integrated graphics.
    I updated my PSU to 600 watt Corsair and tried GTX 750 Ti and GTX-660 cards to no avail (the computer won't boot past HP splash screen).  I've also tried AMD Radeon R7-265 card but couldn't even boot to the HP splash screen.  As I understand, HP offers no BIOS updates for Windows 7 (I read here that one guy loaded a BIOS update for Windows 8 on his Windows 7 machine and it worked, but I am too chicken to try that).
    I just want to put this issue to rest.  So my question is simply this:  Does anybody know of ANY graphics card series that will definitely work OUT-OF-THE-BOX in my machine with the stock BIOS and PCI-Exp 16 Gen 2 slot?  I was going to try a GTX 500-series card next.  But I wanted to get some advice first, since I won't be able to return it if it doesn't work.
    Thank you!
    Gary
    This question was solved.
    View Solution.

    Hi,
    Graphics card compatibility with the BIOS levels in PCs is not the only factor.  PCI-E slot version compatibility both upwards and downwards would be another factor.  Manufacturers will at times view standards differently and hence design their graphics cards to function differently compared to the same card being made by a different manufacturer.  Manufacturers may also design graphics cards to only work with their motherboards.  Bottom line is that not every graphics card will work in every PC.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Which Card Will Fit My G5 Power Mac?

    I have a Power Mac G5, But my Graphics card is no longer working.
    this is my spec on the the side panel:
    G5DP2.0/512MB400/160/SD/R9600/PCI-X/56K
    Can Anyone tell me with a list of Graphics cards that i can put in this machine?
    Thanks guys you would really be helping me out.
    Chris

    Hi-
    Your G5 is 8x AGP Pro graphics (can't use the PCI express X1900).
    The ATI Radeon X800XT, or the Geforce 6800 are good performance upgrades. For simply a graphics card, the ATI Radeon 9600 PC and Mac version could be an option, though there are reports of incompatibility in some G5's.
    Discontinued Radeon 9800 SE and 9800 Pro models are also a possibility, though one needs to watch eBay (or such) for those. 9800XT or the 9600XT are also possibilities.
    Benchmarks

  • Satellite P10-504 - Recovery disk will not load

    Anyone got any ideas why my recovery discs will not load,all i get is the window box asking what would you like windows to do,,like what you get when you insert a vid or music disc, am sure the last time i used them they just went straight into recovery mode,i have had a major fault which i have managed to just about sort [see disappearing IE down the page] but feel i need to start again] thanks

    Sido
    These are Toshiba's instructions (last updated July 06 so is the P10 covered?)
    How to boot your Toshiba PC from CD-ROM, LAN, or diskette
    Print
    Document ID: 98080545
    Posted Date: 09/16/04
    Last Updated: 07/21/06
    Operating System: BIOS
    Category: Boot/Reboot, CD
    Distribution: Public
    Applicable Models: Portege All
    Satellite All
    Satellite Pro All
    TE-Series TE2000
    Tecra All
    Use of any software made available for download from this system constitutes your acceptance of the Export Control Terms and the terms in the Toshiba end-user license agreement both of which you can view before downloading any such software.
    Information:
    Many Toshiba PCs can boot (start Windows, or another operating system) from devices other than the built-in hard disk (HDD) or built-in diskette drive (FDD). These devices include USB diskette drives, CD-ROM discs, a local area network (LAN), and PC Card (PCMCIA) hard disk drives.
    Toshiba PCs that offer alternate boot devices allow you to specify which device to boot from (the 'boot priority') by three methods:
    From BIOS Setup (semi-permanent setting)
    Boot priority specifies the order in which the computer searches for a bootable operating system. For example, if you set your system to boot from devices in this order: CD-ROM > HDD > LAN, the computer first checks for a bootable CD, then for a bootable HDD, then for a bootable LAN, and loads the operating system from the first one it finds.
    Different models offer different options for setting boot priority. For information about how to access the BIOS/CMOS settings on your Toshiba PC, please see the Support Bulletin entitled "How to access the BIOS Settings on your Toshiba Portable PC" that is applicable to your model. By setting the boot priority in this manner, the boot selected priority setting will be retained for all future restarts, until it is changed again.
    From the Boot Device Menu (temporary setting)
    When the TOSHIBA splash screen is displayed when you first turn on your computer, a boot menu prompt may be displayed for a few seconds near the bottom of the screen, indicating that a key (F2 or F12, for example) can be pressed to display a menu of boot options. The time allowed for detecting the keypress is very brief, so you'll need to be both prepared and quick.
    On some models this prompt reads Press F12 for boot menu. On others, it may say Press C to boot from CD-ROM. On still others, there may be a row of colored icons representing the various boot devices (HDD, FDD, CD, LAN, PCMCIA, etc.) Press F12 while these icons are displayed, and then use the arrow keys to move the cursor from one to another. As new models are released, the wording of these prompts may change.
    On models that offer a text boot device menu, simply press the key corresponding to the desired boot device from the list of available devices.
    The selection of a boot device from any of these boot device menus affects only the current startup operation; the next time the computer is started it will follow the boot priority setting established in BIOS Setup (see the BIOS Setup method, above).
    From the Boot Device Hotkeys (temporary setting)
    Immediately after pressing the power-on button, press the hotkey for the device from which you wish to boot:
    Hotkey Boots from device
    C IDE CD-ROM1
    F ISA FDD2
    U USB FDD3
    N internal LAN adapter4
    The computer will boot from the selected device if it finds a bootable operating system, otherwise it will search for a bootable device, following the boot priority set in BIOS Setup.
    "IDE CD-ROM" refers to the computer's internal CD-ROM drive (built-in, SelectBay, or built-in to a Toshiba docking device).
    "ISA FDD" refers to an internal or SelectBay diskette drive, or an external diskette drive that connects to the PC through a special Toshiba-proprietary connector.
    Not all models support booting from a USB-connected diskette drive.
    Not all models support the hotkey for the internal LAN adapter, even though they may support booting from LAN.
    The selection of a boot device from Boot Device Hotkeys affects only the current startup operation; the next time the computer is started it will follow the boot priority setting established in BIOS Setup (see the BIOS Setup method, above).
    Notes:
    Booting from a CD in a CD-ROM drive requires that the CD be made bootable when it is created ('burned'). Simply copying files to a CD does not make it bootable.
    If a "PXE..." error is displayed when you start the computer, it indicates that the computer is attempting to boot from a network (LAN), but is not able to find a remote boot server. If this happens repeatedly, and you are not deliberately trying to boot from a network server, change the boot priority in BIOS Setup to make 'LAN' the last entry in the list of boot devices.
    - cc/wa

Maybe you are looking for

  • JSTL forEach inside html form

    I am using JSTL to display data in an editable menu. The data is retrieved from a database and the user may change it if required. The problem is that I get a blank page inside the forEach tag. %@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix=

  • [5800] Importing messages after backup failed

    Before installing the new firmware on my 5800, I backupped everything by using the backup function in the filemanager. I also did a hard reset. I started importing all of the settings and files from my backup, and it looked like it all worked. But wh

  • Character Set Inquiry

    I have a database which is installed with ASCII as character set and I can store chinese in it. I find that it is possible to install the dB with character set for BIG5 or GB for storing chinese. What's the difference? Moreover, how oracle perform so

  • Damn this firefox ....Its was working fine till yesterday " The connection was reset.The connection to the server was reset while the page was loading

    It was all fine till yesterday.. no proxy nothig is blocking. All other browsers working fine. Please assist The connection was reset The connection to the server was reset while the page was loading. The site could be temporarily unavailable or too

  • Choose function for graphics

    i am configuring an alarm control panel that will pop up when certain conditions are met and i want to display an actual photograph of what might be wrong with some troubleshooting tips. Now i seem to be able to do this with a logical expression and