Satellite P100-426 - What sound driver I need for Windows 7 64bit?

Hello,
I have installed Windows 7 64bit to my P100-426. It was no problem but I can't foud a driver for the sound chip and I also don't know wich sound chip is on board.
Maybe someone can help me.
thank's a lot.
sven_lee

Hey,
The problem is hat neither for Windows Vista 64bit or Windows 7 64bit are drivers available for your notebook model. I have checked this on official Toshiba website:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
According the Toshiba page your notebook has Conexant sound chip
But Conexant doesnt provide drivers directly so you have to check the Toshiba website again
I found out that Satellite P300 has also Conexant sound card and there is a driver for Windows 7 64bit available. In my opinion you should try the sound driver from Satellite P300. Theoretically this should work. ;)

Similar Messages

  • Satellite P100 (PSPA6A-028017) - Sound driver for Windows 7

    Does anyone know what audio drivers to use for this model on Windows 7?
    Device manager says "This device cannot start. (Code 10)"
    Drivers listed for it are drmk.sys, hdaudio.sys, portcls.sys, sysfxui.dll and wmalfxgfxdsp.dll all of which are listed as "Microsoft" and "Windows 7 RTM"
    Various instructions linked to various drivers (on the Toshiba site and elsewhere) none of which seemed to do anything.
    None of the drivers on the Toshiba site for this model work.
    Hardware was working just fine on XP before the Windows 7 upgrade.
    Can anyone tell me what drivers to use for this chipset and/or what else to try?

    Hi Jonathan Wilson,
    I have checked the Toshiba Australian driver download page where your notebook model is listed and it seems that there are no Windows 7 drivers available at the moment :(
    Theoretically you could also use the drivers from the European page, where you can get Windows 7 drivers for Satellite P100, model nr. PSPA6E.
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Check this!!!

  • Re: Satellite Pro U500-1DK - Touchpad On/Off utility for Windows 7 64bit

    Hi There,
    Whilst the laptops originally came with the 'Touch Pad On/Off Utility' to control the touchpad 'on/off' button located just above the touchpad, I have accidentally un-installed it and cannot find it in the driver list.
    I notice there is an XP version but not Windows 7 version.
    Can anyone assist me?
    Kind Regards,
    Chris

    Hello
    Why you have uninstalled this tool if you need it?
    Anyway, for Windows 7 you need the tool Value Added Package. After new installation of VAP, the touchpad on/off button should work properly again.
    Check this!!!

  • Bluetooth driver fix needed for Windows 8.1 new install

    I recently did a clean install on my Lenovo Thinkpad T61P of Windows 8.1. Bluetooth is missing in PC Settings but does show up in services and it is enabled and set to automatic. Don't think that matters as the program or drivers are missing. Can someone direct me to the proper download link to get this installed and showing up in PC Settings so I can get it running? I cannot find proper download to install and this is a well known issue as I have upgraded from a XP system.
    thanks in advance

    thanks for replying. As I was waiting for some answers to how to fix this bluetooth issue, I was continally bombarded with this popup window for time and date per the side window screen when you scroll over by it. I tried fixing it and decided to go into the mouse properties in Control Panel, went to mouse, and then into Ultranav. I unchecked the second feature that evidently froze my cursor, and now I have no cursor at all. I have booted up and as soon as I enter my login pin,  I lose the cursor. I have tried system restore but it wants my anti virus disabled and I have not  been able to do it. I have gone bake into the same settings feature to enable, but as soon as I do, it immediately transfers me out of the Ultranav properties menu.
    Short question, Can I boot load the new driver into this OS that it needs? I do not see this driver as a property for my touchpad. I suppose I could get a mouse and try it, but do not have the USB end for the ones I have. Any idea how to get this Ultranav driver loaded without any cursor? I have no idea and system restore does not work without disabling antivirus and I cannot do this without cursor. Tried to boot to safe mode but I have not been successful as I don't know how evidently.  Any suggestions would be appreciated then I will get back to you on the bluetooth issue.
    thanks
    edit to say I found a laser mouse and inserted it and it did get my cursor back. I have not disabled antivirus and doing another system restore. Two points come up as a result of this. How do I disable my antivirus using Windows 8.1 on a laptop that does not have FN + F8 option? Is there a file you can install to get this nice bootup option to work?
    Second. is it possible to put a shortcut on the desktop or startup page for system restore. Maybe it is in the programs section as I just now thought it may be there but can't look right now as doing a system restore.
    Finally if anyone can tell me the current drivers to download and install for a Lenovo T61P using Windows 8.1 for the updated Ultranav files and also the bluetooth recognition file. I will get back and answer your questions on what is seen as soon as I am up and running again, which should be shortly.
    And if anyone has the answer to disabling the popup date and time window in lower left hand corner when the charms menu is activated, I would greatly appreciate it as this drives me crazy. this is how I got all these things messed up to begin with.
    thanks and I hope this is not confusing.

  • Deskjet 995 drivers needed for windows 8 - 64bit

    I have a great Deskjet 995c that I would still like to use, I have a bunch of ink still and it never gets clogged like my last 3 new HP printers (564 ink type).  Is there a way to make it work with Windows 7 Pro (64-bit) or Windows 8 (64-Bit)?
    Thanks in advance for your help. 

    http://xpdrivers.com/printer/hewlett-packard/deskj​et/995c/_5_619.cfm

  • Satellite P100-426: Windows Mobile Device Center doesn't find my BT device

    Hi,
    why doesn't Windows Mobile Device Center find my Bluetooth device (although my bluetooth is working properly)??? I have a Toshiba Satellite P100-426 with a build in Bluetooth Device
    Sascha

    Ensure that your Bluetooth device is in the "Discoverable Mode".
    The following website:
    http://aps.toshiba-tro.de/bluetooth/redirect.php?page=pages/howto.html
    offers a document called:
    "Synchronization via Bluetooth (Vista WindowsMobileDeviceCenter --- WindowsMobile 5)"
    which is maybe helpful for you.

  • What drivers do I need for a dell V515w AIO printer on my MacBook Pro OX S 10.7.2

    What drivers do I need for a Dell V515w all in one printer for my MacBook Pro OS X 10.7.2 ????

    Uh, tough call, you'll have to check what is used with a PC, drivers or driver+software.
    If driver+software then that's a problem as they likely won't write one for OS X.
    If drivers you can install these open source one and hopefully it might work,  Dell and Apple don't get along so you likely won't see Dell drivers installed by Apple in OS X like they do for others.
    http://sourceforge.net/projects/gimp-print/files/

  • What technical components are needed for integration of SAP BI and BO?

    Hello,
    What technical components are needed for integration of SAP BI and BO?

    Hi,
    you need to setup a BOBJ server (eg. BusinessObjects Enterprise XI 3.1 or BO Edge 3.1) and then install the BusinessObjects integration Kit for SAP on the same machine your BOBJ server runs.
    In order to build reports you can either use Crystal Reports (eg Install Crystal Report Designer 2008 V1 if you have an XI 3.1 server installed), WebIntelligence (Install the Business Objects XI 3.1 Client Tools in order to be able to build universes), BusinessObjects Voyager or XCelsius. Please note that you have to always install the BOBJ integration Kit for SAP (should be the same version as your server and client installation) on your clients AFTER you installed one or more of the above client tools.
    Please take again a look at the following link for more detailed information (from Ingo) on this:
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
    Regards,
    Stratos

  • What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

    What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

    All you need is an Ethernet cable.
    Just plug it into both machines. Don't bother with a crossover cable, just a plain old Ethernet cable will do. The Ethernet ports on the Macs are smart and will adjust appropriately.

  • What adapter do i need for my macbook pro for a presentation

    what adapter do i need for my macbook pro for a presentation

    What model/Year MBP do you have and what are you connecting it to?
    Ciao.

  • What cables do I need for Apple TV streaming from my iPad to my tv

    What cables do I need for Apple TV, streaming fom my iPad to a HD tv?

    if you have an Apple TV it's don over wifi as in wireless so no cable would be required apart from the hdmi cable the Apple TV connects to the tv with

  • What charger do I need for my 2008 macbook pro 15"

    what charger do I need for my 2008 macbook pro 15"?

    This one:
    http://store.apple.com/us/product/MC556LL/B/apple-85w-magsafe-power-adapter-for- 15-and-17-inch-macbook-pro
    Ciao.

  • What app do i need for my phone printer officejet pro 8500a

    what app do i need for my phone printer officejet pro 8500a

    Hi tiys,
    If you have a Android phone you can download HP home and biz app from the andriod market.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • What app do i need for my epson 600 printer to work with my ipad

    what app do i need for my epson 600 printer to work with my ipad

    Hi,
    You are asking at a wrong forum, anyway firstly please check to see is your printer in this list ? 
    http://support.apple.com/kb/ht4356
    If Yes, please follow this checklist and fix:
    iPad: http://www.apple.com/support/ipad/assistant/airprint/
    If No, check with Epson
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have Safari 3.2.3.  What version do I need for Mac OS X 10.6.8?

    I have Safari 3.2.3.  What version do I need for Mac OS X 10.6.8?

    Go here for a much more up-to-date Safari: http://support.apple.com/kb/DL1569

Maybe you are looking for

  • Where do I put a thank you?

    DNX in .mxf with CC. Superior codec, superior wrapper, now in Premiere... Do I thank Avid for making DNX? Do I thank the guys at adobe for getting this into the suite? Do I thank the people who requested the feature? I'm a fan of Pro Res, but c'mon..

  • 3 Displays to X220

    Hi , someone tell me please, is it possible to connect three displays to X220 with dock-station? Now I have two attached displays.

  • Cannot Uninstall, Install, or use

    Ran the auto update, and now got the following message: "The Older version of apple software update cannot be removed. Contact your technical support group." I have tried just about everything listed in the forums, with no success. Windows will not u

  • Problem when creating a View

    Hi Friends,            I'm creating a View taking one of the SAP tables as base , and it is giving me warning , that all the "All the fields are marked as keyfields"  why is it doing this?? Is there any solution for this , and when I try to create Ge

  • I need to attach a printer command (PCL) to all jobs from a print queue

    We're running NW5.1 SP1a, and I want to send a PCL command to the printer before all print jobs come from a certain queue. The purpose of this is so that the DOS-based program that prints to LPT3 will print from tray 2 of our networked laser printer.