Satellite P100-429 - No sound after Windows 7 installation

I have a Satellite P100-429 Purchased Nov 2006.
I have just upgraded from XP to Windows 7 and Office Pro Plus. All works well but there is no sound if I try to play a CD. I have done usual checks for Mute etc. but no Joy. In device manager a yellow triangle with exclamation mark within is against my sound device. C
an I download a new driver to solve problem or is it more complicated than that? Than you

Hello
For me it sounds like that you didnt install the sound driver for sound card
According the Toshiba website there is no 64bit sound driver available for Satellite P100 but I noticed that Satellite P300 supports Windows 7 64bit and has Conexant sound card too. Maybe this driver is working for you too.
Just search for Satellite P300 drivers and test the sound driver It should work! :)

Similar Messages

Satellite P100-257 - No sound after Win 7 installation

Need help...
I have Satellite P100-257, upgraded from XP to WIN 7. Now my sound device don't work.
I installed driver, but still nothing. In device properties says: device not installed.
However, when I run diagnostic, says that driver has problems and that problem will be fixed after reinstalling driver.
So, it keeps me in the loop all the time.
Tried download some drivers from net, even buy Toshiba Recovery Disk for my model (payed 15$ !!!! for gad's sake!!!!)...
Now, my knowledge here is limited, so any tips, suggestions, solutions are more than welcome!
Thanks!

Thanks m8!
Acctually, after 2 days cracking my head about it, I was this close to buying new machine :)
But, solution was acctually more simple than I thought...And felt so stupid after I finally figured it. Well, Win 7 is more similar to XP than it is to Vista, so I just run simple chec for XP sound drivers on Toshiba download support web site, and it came with one driver for this specific model: *sound-20071106151533.zip* driver. Just needed to check in driver properties for compatibility (XP service pack 3 mode) and simple install...That was it... Run smoothly on WIn 7.
Sometimes, only solution is the simplyest one :)
Thanks anyway!

Satellite Pro U200 - No sound after Windows 7 installation

Hi,
I'm having a problem with the sound after installing Windows 7 on a Satelite Pro U200 (PLUA1E). No Win7 sound driver found on the Nordic driver website. Please help.
G.Magnason

Hi buddy,
Have you already checked the Toshiba website itself?
http://eu.computers.toshiba-europe.com
I found a sound driver for Vista 32bit and the most Vista drivers also work on Windows 7 so its worth a try!!! :)

Satellite P35-S6112 - No sound after Windows 7 installation

I installed Windows 7 on this Satellite P35-S6112 with a Realtek AC97 sound card in it. The card and drivers are working but there is no volume. I can hear sound with a headset very faint. I have uninstalled, reinstalled, attempted update but I have the current drivers installed.
Troubleshooting has been done and system reports no issues. I am in desparate need of help here as my daughter needs this for her college as her other notebook is in the shop. Any help is greatly appreciated!!

I have checked US support page and this old notebook is not supported for WIN7 so Im glad to hear you have installed Win7 successfully.
If the sound card driver is installed properly I dont understand what do you mean with there is no volume. Can you use speakers symbol in task bar and change speakers sound level?
Click also on speakers symbol and open Playback devices. Can you set Speakers to be default device?
Which OS have you used before Win7 installation? Have you noticed the same problem?

Satellite A200-20H - No sound after Windows 7 installation

Hey Guys.
I have just bought this computer from a mate, and I have decided to install Windows 7 on the machine. Everything seemed to work brilliant, until I wanted to try and play some sound. There is no sound what so ever on the laptop, all the sliders are at max, I have tried pushing FN+ESC whit no difference. I have tried reinstalling and updating soundcard driver, no luck either.
I found a "soloution" which said I should install Value Added package, and then run an app, which should unmute the PC, no luck there either..
So I am starting to run out of ideas?
So I am hopeing one of you clever guys in here has a soloution.
If you need any info from the computer, just ask for them and i will reply whit them as soon as possible.
Big thanks in advance
Kim Jensen

Well thx for the soloution, well an attempt to a soloution as the sound is still missing.. I did a total reinstall again.. I installed the Value pack as the article told me, and i ran the sound utillity program.. Still there is no sound..
I have just tried putting some headphones in the computer, to see if sound would come out of those. That didn work either...
Any ohter good ideas? =)

Need WXP drivers for Satellite P100 -429

Hi,
I had to reinstall windows XP on my gf Satellite P100-429, but she lost the origina disk, so when i installed the new XP there are the following devices missing drivers (they have yellow question mark beside them) and I cant connect the laptop to the internet.
1. Audio Device On High Definition Audio Bus
2. Ethernet Controller
3. Mass Storage controller
4. Netwrok controller
5. SM Bus Controller
6 Video Controller (VGA Compatible)
Can anyone tell me where I can find these drivers, i have been looking all day for them.
I imagine if I can find them its just a case of putting them on a disk or usb key and installing them ?
Thanks a million.

You must see this problem from other side. Fact is that all drivers, tools and utilities must be installed in right installation order. How to do this is listed in Installation Instruction document and this can be downloaded on this download page for your notebook model.
Obviously you didnt follow this order and some drivers are missing now.
1. Audio Device On High Definition Audio Bus try with sound driver and install also modem driver
2. Ethernet Controller install LAN driver
3. Mass Storage controller is chipset utility installed?
4. Netwrok controller is WLAN driver installed?
5. SM Bus Controller try with flash media driver
6 Video Controller (VGA Compatible) display driver
Install this and post result but, as I wrote before best way to install all stuff properly is to follow install instructions document.

BIOS update fails on Satellite P100-429

Ive had a bad flash on my Satellite P100-429.
The utility crashed which left me with a bookend. Not happy
Ive created a floppy crisis recovery disk & bought a USB floppy drive after much hunting the internet for info.
Problem is I need verification on the exact key combination for my laptop to envoke crisis recovery mode.
On power up I have usual symptoms, flash of LEDs, power to CD-rom, power click of floppy drive etc...
I just need to verify correct sequence for key combinations.
Can anyone help?
Win-f, win-b, fn-f, fn-b, win-esc, fn-escape doesnt seem to work for me
How long to wait for floppy to start after combination etc?
Help!

Hi
I dont have experience with these BIOS recovery tools because in my opinion its a little bit too risky. This is no official way to recover a BIOS and I dont want to destroy the whole ROM module.
In my opinion if a BIOS update wasnt successful, you should go to an authorized service provider. Contact a notebook technician and explain your situation. The technician can try to reflash it and they have more experience. I think this shouldnt be a problem to contact one. ;)
Good luck!

Upgraded my macbook pro to mountain lion. But during windows installation, it refuses coz of FAT file system. Also is it possible to partition after windows installation???

I just upgraded my macbook pro to mountain lion. Now I want to install windows, but during installation using bootcamp, it says windows can't install on FAT partition. I couldn't change it to NTFS. Also how can I partition my hard disk after windows installation. Coz before windows installation, if I partition hard disk, it won't allow me to install windows saying startup disk can't be partitioned.......help would be appreciated.
Thanks

bkchoo wrote:
Now, I wish to upgrade from Mountain Lion 10.8.5 to latest version of OS X Yosemite, but I am in doubt and worry if after upgraded to Yosemite, can I still using my Windows XP where I installed now in Mountain Lion 10.8.5 BootCamp?
Yosemite does not allow a new installation of XP, but an existing XP installation is self-contained and will continue to work. Does your XP installation use a FAT partition? You may be better off using NTFS and then upgrading to Yosemite.
Will the Yosemite upgrade process delete my Windows XP partition or crash my current BootCamp? Can I still have an option to load OS X or Windows XP (press 'alt/option' key during boot up) after upgraded to Yosemite?
If you have made any re-sizing attempts to WXP partition Yosemite will cause problems, otherwise the Yosemite upgrade leaves XP untouched.
Are there any specific reasons to upgrade to Yosemite?

Satellite C55-A5182 - Screen flickering after windows 10 upgrade.

Satellite C55-A5182: screen flickers after windows 10 upgrade....help!!!

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and I understand that you are having an issue with the Touchscreen on your HP Notebook - 15-ac020nr. You had mentioned that since your Windows 10 Upgrade, it no longer works. Have you tried doing all updates (Windows, HP Support Assistant, BIOS)?Have you tried restarting the Notebook a couple of times?Have you tried to run the Windows Troubleshooter? Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The HP Support Assistant will also help find a proper driver for you to use. Updated Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product. They will be released as they become available to HP. I did find a troubleshooting document for you called Touch Screen Issues. Although it does say it is for Windows 8, it will still work for Windows 10. Please follow the provided troubleshooting steps and re-post with the results. Have a great day!

Satellite P100 - 429 A3 Turning off when windows loads

Heya. This is a serious problem that has rendered my Notebook unusable. I was just wondering if anyone knows what it is.
I was in a source game when it happened for the first time, I jumped in the game and the laptop just cut out. No shutting down, it just turned straight off as if someone had held the power button. I stared at it for a minute then powered it back on. It seemed to go fine, I thought it was just an odd hiccup, but then after it had finished the windows loading screen, it did exactly the same thing. Now every time I start up, it get's past the loading screen and sometimes it get's to the Welcome message, soemtimes before the cursor is even loaded it will turn off in the same mannor.
The only things I have recently changed is the BIOS (which is my obvious suspicion.) I was just browsing the Toshiba website drivers page and I found a BIOS update for my Notbook cliaming that it had been improved. So I downloaded and installed it, once the installation had done it's job the Notebook restarted, but on first run Windows bluescreened before it had even loaded. Then after that it was working fine until now.
I also tried to use a Windows disk to do a recovery of windows. However, the recovery console caused the same thing. Within a few seconds of initializing, the computer just cut out.
If anyone has a clue what's goind on, please let me know.
Sorry for any typos, I'm not on a familiar keyboard.
Thanks again.
Wolfy

> I jumped in the game and the laptop just cut out. No shutting down, it just turned straight off as if someone had held the power button.
Well, this sounds like an overheating issue. Fact is that all internal devices run with a full performance during the game playing. This leads to a high temperature inside the notebook. If your ventilators are not free due to the dust and debris then the notebook will shouts down to prevent the hardware from damage.
In such cases the fan cleaning is necessary and advisable.
I have had a similar issue on my notebook and solved it using an compressed air spray!
In my knowledge the Sat P100-429 belongs to the PSPA3 series.
You should really be 100% sure that you use the right BIOS.
However, its also possible that the notebooks hardware malfunctions.
In such case the hardware check is needed. Such test can be done by an authorized service provider in your country.
Good luck

Windows 8 Upgrade on Satellite P100-160 - No Sound

Hello everyone.
I own a Satellite P100-160 {http://www.toshiba.co.uk/discontinued-products/satellite-p100-160/}
I decided to upgrade the machine from Windows Vista to Windows 8.
The machine works o.k. apart from the fact there is no longer any sound.
It seems that windows 8 does not have the correct sound drivers.
Can anyone help me out with a solution?
The laptop is in good working order, and apart from no sound.
Thanks
colesdav.

Hello, thanks for your replies so far.
Just in case anyone else out there has tried to move to Windows 8 on an older laptop I will tell you
What I have tried that did NOT work.
(1). http://www.boards.ie/vbulletin/showthread.php?p=81760022
(2). http://www.station-drivers.com/page/conexant.htm
(3). http://www.dell.com/support/drivers/us/en/04/GetDriver/InitiateFileDownload
(4). http://drivers.softpedia.com/get/SOUND-CARD/Conexant/Conexant-HD-SmartAudio-HD2-Driver-436761-for-Windows-7-x64-Windows-8-x64.shtml
(5). http://www.toshiba.co.uk/innovation/download_driver_details.jsp?
None of the above suggestions / drivers worked.
The drivers all did install but ... no sound from the Laptop.
I accept this is an old laptop but it is in mint condition.
Here is my solution to date.
I bought a Sound Blaster X-fi Go! Pro external USB Sound card from Maplin U.K. yesterday.
It works and the sound quality is great!
I am currently using an external speaker ... but I may try to install the USB sound card inside the
Laptop and see if I can rewire the speakers ...
Here is a link to the USB Card.
http://uk.creative.com/p/sound-blaster/sound-blaster-x-fi-go-pro
By the way I have managed to upgrade 3 of my 4 laptops from Windows Vista /7 to Windows 8.
Here is what worked with comments.
Toshiba Satellite P100-160 - Vista to Windows 8. Only problem = No sound Driver.
Toshiba Satellite L300D - Vista -> Windows 7 - Windows 8. No problems at all.
HP G62 - Windows 7 -> Windows 8. No problems seen yet.
The only machine I cannot upgrade is an HP Envy 15-1060ea due to notebook specific ATI Radeon 4830 Driver.
Thanks
Bye
Colesdav

Lack of sound after Window 7 (64) installation into iMac OX 10.6.7. Tried to install driver from Snow Lepard disc (Cirrus 64).Wizard installed driver. No sound, Device Manager indicated that "driver is not installed" but also that the"device is working"

I don't know how to proceed. I didn't have sound after installing Windows 7 inot iMac OX 10.6.7 (64bit) After unsuccessful attempt to upgrade the driver from the BootCamp file, I deleted the driver from the Sound and Game controlled hoping that I would allow me to automatically install the correct driver from Boot camp.
Now the Sound Video Game controller disappeared from the Device Manager
How can I find out which is the correct sound driver for my computer (The Speaker Properties only say:WIndows)?
How can I install it without seing the Sound and Game controller in the Device Manager?

When you say "manually download", you mean from the BootCamp File on Snow Leopard, or from the Internet.
My additional problem is that the "Sound and Video Game Controller" disappeared from the Device Manager when I removed the previous driver. I don't find the place where I can reistall the new driver.

Satellite P100 (PSPA6A-028017) - Sound driver for Windows 7

Does anyone know what audio drivers to use for this model on Windows 7?
Device manager says "This device cannot start. (Code 10)"
Drivers listed for it are drmk.sys, hdaudio.sys, portcls.sys, sysfxui.dll and wmalfxgfxdsp.dll all of which are listed as "Microsoft" and "Windows 7 RTM"
Various instructions linked to various drivers (on the Toshiba site and elsewhere) none of which seemed to do anything.
None of the drivers on the Toshiba site for this model work.
Hardware was working just fine on XP before the Windows 7 upgrade.
Can anyone tell me what drivers to use for this chipset and/or what else to try?

Hi Jonathan Wilson,
I have checked the Toshiba Australian driver download page where your notebook model is listed and it seems that there are no Windows 7 drivers available at the moment :(
Theoretically you could also use the drivers from the European page, where you can get Windows 7 drivers for Satellite P100, model nr. PSPA6E.
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Check this!!!

Satellite A120: No sound after Vista installation

Hi,
I've been handed a second laptop by work - so am unsure if the sound ever worked but..
1) I've installed Vista Business Edition
2) No sound from either the headphone jack or speakers
3) No errors in the Windows Device Manager
- ReInstalled the Realtek drivers from the tosh drivers site
- <still no sound>
Ran windows update
- <still no sound>
- When playing a sound file the graphic equaliser appears normally - i.e. bouncing up and down with the beat
Now out of ideas!!
Thanks in advance!

Hi buddy
I think I know what the problem could be.
The sound must be put as high as possible before install of Vista!
Furthermore you should check if the sound was not muted runig the previous OS!
This could affect the sound on the new installed Vista OS!!!
I have searched a little bit on the different Toshiba websites and in the knowledge central and found this useful article regarding the sound issues running Vista OS
[Sound Utility to Turn Mute Off |http://support.toshiba.com/support/viewContentDetail?contentId=1671893&pf=true]
I would appreciate some feedback from you
Regards

Satellite P100-192: crackling sound coming from speaker when using MSN

Hello, i have just bought this p100-192 laptop. The speakers seem to muffle ( especially whenever there is an incoming message in MSN )
Does anyone know why and a solution to it ????

Hi,
I own a Satellite P100-188 and the sound crackled in windows with driver 3.11.0.0 and BIOS 2.10, after sending the notebook back to Toshiba only for them to install driver version 3.11.0.51 I found that some sounds where not playing at all. I have come to the conclusion that the Conexant sound chip (or hardware) is just rubbish, for instance take the sound volume of the beep tone when hitting caps lock or num lock compared to the general volume, which, at full volume is barely audible!
I myself went back to using version 3.11.0.0 as I would rather have crackling sound than missing sounds. I'm considering purchasing a Soundblaster Audigy 2 ZS PCMCIA sound card as I play games a lot on my notebook. If sound is important for you, you may want to consider it too.
An eaiser way to check your BIOS version is to click Start select Run... and enter this line in the dialog box
TInTouch.exe and hit enter.
Then switch to the Protect and Fix tab and left click PC diagnostic tool, it will list all the information on your notebook.
This is how I updated my BIOS, I downloaded the win update file and unzipped it, I then ran the Phoenix Winphlash program and entered a bios backup destination and browsed to the .wph file which was in the folder that the program unzipped to, I then followed the onscreen prompts and that was it, the machine re-booted with the new bios installed.

Satellite P100-429 - No sound after Windows 7 installation

Similar Messages

Maybe you are looking for