Satellite P100-434 does not have Intel Vitualisation (VT)

Hi,
My shiney new P100-434 which cost me a fairly serious amount of money does not have Intel Vitualisation (VT) enabled which is annoying because I went for this laptop specifically because it was Core 2 Duo which supports VT and I want it in order to run KQEMU faster under Linux.
There is no option to switch it on in the BIOS and no updated BIOS available either.
Anyone know if a BIOS with the option to enable this feature is coming or suggestions for who I should complain at to make this happen faster? I see plenty of other people in the forums with other models that similarly have it disabled by default and no BIOS option to turn it on!
Cheers,
Jamie

Hi
I have already posted my statement to this theme.
Please check this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=21855

Similar Messages

Satellite P100-347 does not hibernate - Not enough ressourses to perform the API

When I close the lid on my P100-347 and it is programmed to hibernate, it doesnt but gives me "not enough ressourses to perform the API? very irritating

Hi
I found this Toshiba document:
Notebook doesnt hibernate - "Insufficient System Resources Exist to Complete the API error message occurs.
http://support.toshiba-tro.de/kb0/FAQ6201CE000SR01.htm
It seems you have to contact the Microsoft Support to obtain a hotfix.
Possibly this update update will help:
http://support.microsoft.com/kb/909095
good luck guys

I have an old MAC using OS 10.5 (does not have Intel processor). I need a new printer, but i cannot find one that will work with such an old operating system. Is there a new printer that will work with this old system?

I have an old IMAC using 10.5, and it cannot use any newer operating system. I need a new printer, but I cannot find one that is compatible with this old system.
Is there a new printer out there that will work with 10.5?
Thanks,
Niles Stroh

Canon Pixma iP4950 works great with my PPC G5 iMac on Leopard. Maybe other of their models do as well.

Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

The 15" Retina's will have better performance than any 13" Retina. Not only do the 15" machines have dedicated GPU's, but they also have quad-core processors, whereas the 13" Retina's only have dual-core processors.

Why my iphone map does not have satellite positioning?

Why my iphone map does not have satellite positioning?

Because governments don't want you moving these satellites around. They already have them positioned where they want them .

Satellite P100-434 startup issue BSOD

Hello everybody!
I have Toshiba Satellite P100-434 laptop and lately I have encountered many problems during the startup.
1. The laptop starts normally up to the writing the password. Then, in the middle of typing BSOD.
2. The laptop gets BSOD or turns off about 2 seconds after the Microsoft bar has appeared.
3. The laptop doesn't turn on - after launch there is only one flash of three blue diodes on the right and the screen stays blank. No Toshiba welcome screen.
After few attempts I succeed with getting the Toshiba welcome screen (it's after the second flash), but there are another issues later, the laptop turns off or tries to Launch Startup Repair. It says only about unspecified error and restores back to the previous state.
4. I tried to enter the Safe Mode, but few times I encountered the same: the laptop turns off after loading some drivers.
BSOD are too short for me to spot what is going on - I spotted only BAD POOL something and IRQL NOT EQUAL something as if it was something with drivers, presumably the NVIDIA display driver. I uninstalled it and downloaded new one and installed it (version 7.15.11.5666). Ths is NVIDIA GeForce Go 7600. Once there was some information about dxgkrnl.sys?
I did Windows Memory Test at startup - no errors.
I scanned for any viruses: my AVG removed some Cryptor virus, but the problem still is there.
The OS is Windows Vista Home Premium SP 2.
I don't know what is the problem. Is it the display driver or any other driver? Or maybe some power related problems? Any advice welcome!

Additional information:
Yesterday I encountered again the same problem: BSOD during typing the password: IRQL NOT LESS OR EQUAL; STOP: 0x000000D1 (0x00000000, 0x00000002, 0x00000001, 0x8888E1E3), disk.sys address 8888E1E3 base of 88880000, DateStamp 49e01ef2.
I turned the laptop off manually and after 30 some attempts I succeeded with switching it on again (up to then there was no Toshiba welcome screen and the display remained blank) to meet up with another BSOD shortly after launch of Windows:
STOP 0x0000000A (0x0000000B, 0x000000FF, 0x00000000, 0x8B48F3AD)
The next launch the system made the CHKDSK. There were plenty of index entries being deleted, but there were not bad sectors or anything. When I finally got through all this, I did another diagnostic of the HDD, but it showed no problems.
Anyway: I would like to know whether the problem is hardware or rather software related, because I wouldn't take my laptop to repair if there is something I could do by downloading/reinstalling.

Playing Call of Duty 4 on Satellite P100-434

Hi all,
I have recently purchased my Toshiba Satellite P100-434 (Intel 1.66 Dual / 2GB RAM / Go7600) and have just tried gaming on the system.
I have installed COD4 and tried to play but it seems as the laptop has big issues running it.
I have updated my display drivers to the nvidia vista 32-bit ones downloaded from this site seems to have made very little if no diffrence.
I am running the game with every setting to minimal with res. of 640x480 and it still struggles.
Everything on the laptop should be sufficient for running this game except for the cpu which is recommended a 1.8 dual and this is a 1.66 dual. could just this be why the game cannot run too well?
I wouldnt have thought so.
I have had friends who have run this game on worse spec pc's.
Any suggestions what could be my problem or what else I could do to improve the performance?
Many thanks...

Hi
If got a Satellite notebook with a high performance AMD CPU and the newest ATI Radeon graphic card.
Im running Windows XP due to better game performance. The Vista needs more hardware resources and therefore I prefer the XP.
Anyway, last week Ive installed the COD4 and believes me this game needs more hardware resources as you believe.
Nevertheless you should be able to run the COD4 using the 1024x768 resolution. But its another question if COD4 would run smoothly.
However, I found an Toshiba FAQ doc regarding some video 'stutter' during game play using Windows Vista:
Check this:
[New video driver and BIOS eliminates video 'stutter' during game play (Windows Vista)|http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1924 764xml&sliceId=&dialogID=46208288&stateId=0%200%20 46206416]
Regarding to this doc the display driver & BIOS update should help to improve the performance.
Bye

I have an older Power Mac and it does not have the ability/hardware to connect to my wireless network.It is on 2nd floor which has no ethernet connections available. How can I get connected wirelessly?

I have an older Power Mac desktop computer. I do not believe it has the hardware to connect wirelessly to my wireless network. The computer is located on the 2nd floor of my house where there are no ethernet network connections so I would have to use wireless to connect to the internet. I have a wireless LinkSys router downstairs that I use to create my wireless network. I also have a Time Capsule upstairs but without the ability to plug an ethernet network cable into it, I cannot use it to get internet access t the computer.
What hardware can I add to give me the abiity to connect the Power Mac to my wireless network?
Is there a way perhaps to link routers? IE. Can I somehow have my existing wireless router downstairs connect wirelessly with the Time Capsule upstairs that i could then plug the Power Mac into for connectivity?
Not sure what version of OS this computer is currently using but do know it does not have the newer dual Intel processors. As such I am unable to update to newer OS versions.

While uselessSABOTAGE's advice is great, in case of future issues, it would helps us in the future if you would post accurate tech specs of your model iMac.
You info states you have an older IMac PowerMac, but is also says your OS X version is OS X 10.7.2.
This is not possible. OS X 10.7.2 Lion only runs on Intel CPU Macs.
Please, go up to the Apple symbol in the upper top left of OS X main menu bar. Click the symbol. Then click About this Mac. A popup window appears that gives some basic info. Then, click the More Info button and both post your iMacs complete specs by selecting/highlighting all of the info and copy paste this into a reply to this post, editing out your iMac's serial number. Then update the info you posted in your user profile with some of this new found data for future postings.

Airport Extreme does not have a valid IP address

My Airport Extreme Base Station 802.11N (AEBS) no longer has an internet connection and I cannot share internet or even access the internet via an ethernet cable from the AEBS to my iMac unless in Bridge mode. I have a 2.6 Ghz Intel Core iMac running OS X 10.5.6. I also have an Airport Express (802.11b/g) currently offline.
When I plug my ethernet cable directly into the iMac I've got a fast and reliable internet connection. I have also done 2 hard resets on my AEBS without any success. I have ensured that my cables are properly plugged in and had it checked by another person.
I do not have a specific IP address from my Internet Service Provider (ISP). I have contacted my ISP and have confirmed that there is nothing wrong on their end. I had an internet connection previously with "Using DHCP". Now when I select it blanks out the IP address box. I referred to my last working saved Airport setting and my AEBS still does not have an internet connection.
I'm not sure what else I can do. Any help would be appreciated. Thanks in advance.
Byron

Hello,
I'm having a similar problem. Saturday morning my Comcast Internet was gone. I went through all the steps to troubleshoot (powering everything down, checking connections, powering back up from outside, connecting directly to the cable modem via Ethernet, etc.). I only got a valid IP address for a brief few minutes when directly connected. Comcast swapped out my modem, but same issue. Then Sunday they said known problem in area. This morning I got on the line with a level 2 tech. We went through just about everything again, and I can connect very reliably via direct Ethernet connect to modem. If I unplug the ethernet and give it a minute to recognize its gone, ip address goes blank. When I plug it back in, it gets a valid IP address and Internet connects almost instantaneously.
However, with my AEBS (n) I can't get a valid IP address. I use the exact same Ethernet cable from the cable modem the AEBS Internet WAN port. But it gives itself a self-assigned IP of 169.254... I've gone through the cycles of powering down and back up a couple of times, checked my connections several times, and reset my AEBS to factory defaults. Still no dice. Internet is set to DHCP and to share a public IP address (in the default 10.0.1.x ranges). Has my AEBS effectively lost its ability to get a valid IP from the modem? Is it dead? Anything you can think of that I can try?

I'm trying to install OS 10.6 onto my Macbook, which currently has OS 10.5.8. I clicked install (on the DVD) and selected my Macintosh HD drive. I was given the message that that disk cannot be used because it does not have the GUID partition????

I'm trying to install OS 10.6 onto my Macbook, which currently has OS 10.5.8. I clicked install (on the DVD) and selected my Macintosh HD drive. I was given the message that that disk cannot be used because it does not have the GUID partition. In order to have a GUID partition, it suggested I go to disk utility and make the change. I couldn't see the partition tabs in the disk utility application. So how do I accomplish the GUID partition?

The problem is, reformatting the partition may require you erase the hard drive. Normally Intel Macs are preformatted GUID. The fact that yours is not, says someone who initially installed the system on your Mac did you a disservice. Regardless, you should backup your data before you upgrade. GUID formatted drives generally are not compatible with iBooks (pre-2006 consumer notebooks by Apple) Powerbooks, and PowerMacs, and iMac G5s. So if you indeed have machine with the MacBook name on the screen frame, it was not properly formatted from the beginning.

Fire fox shows a window which indicates that the yahoo tool bar does not have a security cert. Then runs using 99% processor

a window pops up when i open Firefox which indicates that the Yahoo tool bar does not have a security cert. Seems to lock up when going to Comcast.net. Uses 99% processor and won't close.
== URL of affected sites ==
http://comcast.net

Ok. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
Normal or safe mode still has same result. No startup, no option button and no customize.
Thanks for your help. Got any other suggestions?

I want to play Farmville on my iMac, but it does not have Flash Player. I tried to download it, but I was not able.

I play Farmville on my laptop and yesterday that I unpacked my new iMac, I was not able because it does not have Flash Player.
I tried to download it, but it would not let me. Is iMac not compatible with Flash Player?

Adobe Flash Player version 11.1.102.55 works great on all my Intel iMac's.
Adobe - Install Adobe Flash Player

Mini mac does not have room to run all app or upgrade

Help please. My mini mac is telling me that I do not have enough room to upgrade or run all my apps. Can I upgrade something inside the drive and if I can, can I just go to the Apple store and have that done?
We purchased the mini mac Christmas 2008 and I have added final cut but nothing else. I do have an awful lot of photos in iphoto, would it help me to backup those onto a external drive then delete those items for more space? I'm taking about 4,000+/- photos and 253 events.
Hardware Overview:
Model Name: Mac mini
Model Identifier: Macmini2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MM21.009A.B00
SMC Version (system): 1.19f2
Serial Number (system): YM746697YL1
I don't know if this info will be necessary or not. I just wanted to have my bases covered.
Thanks.

When I was working in itunes a message popped up telling me there was a problem saving the itunes library. When I attempt to upgrade I receive the message:
"Your hard disk does not have enough space. 2.8 GB is required to download and install the updates. Extra space is required for the optimization process. To free up space, remove files from your start up disk, then try again."
I have one movie in final cut and its approx 14 minutes. There are 4 unpublished movies in imovie and 2 published.
What type of firewall external harddrive do you recommend? I have 2 WD passports for storage.

Hyper-V cannot be installed: The processor does not have the required virtualization capabilities.

I am trying to use Visual Studio 2013 with Windows Phone SDK 8.0 on Windows 8.1 Enterprise running as a guest in a VirtualBox virtual machine hosted from Windows 7 Ultimate. The Windows Phone emulator in Visual Studio will not work. The
guest Hardware Virtualization settings for VT-x and Nested Paging are selected. The BIOS setting for Virtualization is enabled. However, in the guest Windows 8.1 features settings, the "Hyper-V Platform" option is disabled and indicates
that the "Hyper-V cannot be installed: The processor does not have the required virtualization capabilities." However, I checked on my processor which is an Intel (Clarksfield), I7-740QM 1.73 and it supports Hyper-V,
SLAT/EPT. My BIOS has only a single option for enabling Virtualization but none of the other SLAT/EPT, VMX, XD options. I am lost here. Is there a solution? Do I need to use Visual Studio 2013 and Windows Phone SDK 8.0 directly
on a Windows 8.1 host and not through a virtual machine?

You can't run Hyper-V inside a VirtualBox VM (nested virtualization). It doesn't pass through the necessary CPU requirements.
The only virtualization solution that allows for nested VMs is VMware's Workstation and vSphere Hypervisor (ESXi). VMware Player is their free product, you may be able to use it, I've not tried player, but have nested Hyper-V in both Workstation and ESXi.
Follow the instructions here for setting up VMware Player, you need to set the VM settings and .vmx file for it to work.
http://www.virtuallyghetto.com/2011/07/how-to-enable-support-for-nested-64bit.html
http://www.rickygao.com/enable-hyper-v-under-vmware-workstation-for-your-lab/

"This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host does not support Intel VT-x"

Hi, I have installed vmware 5.5 hypervisor on hp G8 microserver. I have created one vm as windows 2008 R2. I have also install vmware workstation 11 on this vm. In this workstation when I tried to run vmware 5.5 hypervisor I come across "This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host does not support Intel VT-x" this statement. Which shows that the host machine does not support virtualization and for that you need to go in Bios and enable it but in present case as host machine is also a vm and you would not find much detail of Bios when you log into the Bios therefore, I am pretty much stuck here. I don't see any information in relation to this. Now my question is:
1. Can we run ESXi inside a vm which is already sitting on ESXi?

I moved the discussion from VMware Workstation to Nested Virtualization which contains several hints on what's possible and what needs to be configured to make things work.
André

Satellite P100-434 does not have Intel Vitualisation (VT)

Similar Messages

Maybe you are looking for