Satellite P100-488 - Installing Toshiba tools and utilities on Windows 7

Hello everybody,
I have purchased a pre-order of Windows 7 Professional for my laptop and would like to upgrade it from Windows Vista Home Premium installed on it at the moment.
However, I just have one question :
- Do you think I will be able to upgrade from Windows Vista Home to Windows 7 Professional without a full install ?
- Else, if I have to perform a full install, then is it possible to install the Toshiba tools and utilities from the CD (I have not found anything to do this) ?
Many thanks in advance.
Fred

Hi Fred
As I can see you have two questions. ;)
At first I must say that I don't believe anybody here will be able to offer exact answers but here is my opinion:
Q1 for OS installation I prefer full installation but I think you will be able to make Win7 upgrade. Problem is how the Toshiba tools and utilities will work after this upgrade. As far as I know in the past Toshiba has suggested removing some tools and utilities before upgrade installation starts.
So maybe you should think about full OS installation. I think it is better solution for you.
Q2 I the whole story I see one problem what if Toshiba will not offer Win7 support for your notebook model? Then you will have problem and just try to use Vista stuff in hope it will works with Win7 too. Anyway, in this forum you can find many postings where people confirm that most of Vista stuff runs well with Win7.
Good luck Fred.

Similar Messages

Need Toshiba tools and utilities for my Satellite A660-149

Hi friends
I have formatted my Toshiba Satellite A660-149 and I didnt create recovery CD/DVD.
I have installed Windows 7 but now thing is that I dont have any of Toshiba features like eco utility, HDD protection, face recognition, NVIDIA graphic controller.
Please suggest me what should I do now....& where I can get this software.

Hi friend ;)
All necessary drivers and Toshiba specific tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > Support & Downloads Support homepage.
At the bottom of this page you will see option Driver download.
Go there, choose your notebook model and you will find all you need.
Of course, there you will find stuff for supported OS version only.
Good luck

Error when installing Toshiba Tools and Power Saver

Hi,
I have a Satellite A100-771 and installed Windows XP Professional with SP2.
Afterwards I installed all drivers. After that I wanted to install the Toshiba Utilities and have got an error message : "Toshiba common Module not found! This setup will terminate."
Furthermore I tried to install the Power Saver Tool, which is more important as the uilities I think. And here I have got the error message: "A fatal error has occurred. This program will be terminated. Code:0x7E"
I am not sure what I can do else. I also installed the hotfixes for Windows which are on the ToolCD from Toshiba. But the problem is still there.
The difference between both errors is that the installation of the utilities setup stop before finishing installation. On the Power Safer installation, it finished on 100% and terminate the setup or the program after the installation.
May somebody can help me.
Eathen

There is a specific order that the Toshiba utilities and drivers have to be loaded in. This list is on the Toshiba download page, and the common modules is one the first utilities that has to be loaded for the others to work

Satellite P300 - lost the Toshiba tools after upgrade to Win7

Hello everybody,
I bought a Windows 7 upgrade to Toshiba.
And I have 2 DVD :
1 for the Toshiba upgrade and 1 for the Windows upgrade.
I have run the 2 first steps without problems.
But when I have run the 3rd step (which is the upgrade of the Toshiba tools), an error occured and I wanted to cancel thee process (I have even removed the CD from the CD reader) but the process kept running.
In conclusion the process went to the end but no tools are installed and when I want to run the CD again it acts as if all the tools are already installed and it doesn't run.
What can I do for the system to consider that the tools are not installed ?
Or where can I find another install program which will run the Toshiba tools on my system ?
Thank you very much.
Laurent.
Message was edited by: laurent1234574

I have installed Win7 32bit on brothers P300 and all tools and utilities Ive downloaded from Toshiba download page and everything works perfectly.
Please check this page and download all missing stuff.
If you need some help please let us know.

Problem installing Oracle forms and report in windows 7

I have a problem while installing Oracle forms and reports in windows 7 64 bit
The error is : [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IY5_e_EApIRMyYAhMG1BuDGr00000B,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
So I Google for it and found that this is version mismatch (May be I am wrong) and it tells that I have to install WLS - 10.3.2 with ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
But I am unable to get wls version 10.3.2.
For better understanding I am listing my installers :
(I) Windows 7 Ultimate 64 Bit
(II) (Oracle 11g) win64_11gR2_database (1 & 2)
(III) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
(IV)wls1033_generic.jar , wls1033p_generic.jar , wls1035_generic.jar
(V)accessbridge-2_0_2-fcs-bin-b06
(VI)ofm_rcu_win32_11.1.1.2.1_disk1_1of1,ofm_rcu_win_11.1.1.3.1_disk1_1of1
(VII) ofm_wc_generic_11.1.1.5.0_disk1_1of1
(VIII)jdk-6u38-nb-7_2_1-windows-i586-ml , jdk-6u38-windows-x64
(IX) oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32
(X)wls1033_oepe111150_win32.exe
(XI)wls1035_win32.exe
(XII)wls1035_oepe111172_win64
(XIII)oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win64
After the installation while configure the forms reports, I am stuck while creating domain.
steps I follow is :
(i) Install Windows 7 Ultimate 64 Bit
(ii) (Oracle 11g) win64_11gR2_database (1 & 2)
(iii) wls1033_generic.jar
(iv) accessbridge-2_0_2-fcs-bin-b06
(v)ofm_rcu_win32_11.1.1.2.1_disk1_1of1
(vi) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
Please any body help, for the installation of oracle forms and reports.
I have a formatted Windows 7 Ultimate
Where I have installed Adobe Acrobat Reader
IIS server from windows installer
Now I want to know the exact procedure so that i can run the forms and report in my machine.
This is my first installation of Oracle forms & Reports, so please do not pre assume about my understanding (Like "to install this he surely did this environment settings" )
Please specify all the steps
Furthermore if Another software I have to download then please tell me.
And I will be grateful if you specify the mistakes in my side.
Looking forward with anticipation.

Solved, Thank you

Cannot install TEMPRO on a Satellite P100-488 error 1603 with Win installer

Hello,
I am writing this post as I have an issue to install the Tempro software on my Toshiba P100-488.
Indeed, on the first screen, I get an error message reading "installation stopped prematurely".
When I check in the events manager of Windows Vista, then I can see that error 1603 is there.
Can you help me please ?
Thanks in advance ! ;-)
Fred

Hi
I searched a little bit on the Microsoft page and found this knowledge base article:
+*You receive an "error 1603: A fatal error occurred during installation" error message when you try to install a Windows Installer package*+
http://support.microsoft.com/kb/834484
Microsoft article says that the error message appears because:
+- The folder that you are trying to install the Windows Installer package to is encrypted.+
+- The drive that contains the folder that you are trying to install the Windows Installer package to is accessed as a substitute drive.+
+- The SYSTEM account does not have Full Control permissions on the folder that you are trying to install the Windows Installer package to. You notice the error message because the Windows Installer service uses the SYSTEM account to install software.+
I recommend checking this document and try the workaround provided by Microsoft.
Maybe it helps
Good luck.

Re: Satellite P300D-10U: installing Toshiba Power Sawer on Win XP SP2

Please help with installing the Toshiba Power Sawer on Windows XP SP2
I have a laptop Toshiba Sattelite P300D.
Installed all Windows XP driver from the site including the Toshiba driver for AMD processors.
Then install the Toshiba Power Sawer and not what happens, only the CPU load by 50% approximately.
In what may be the reason that it is necessary to install Toshiba Power Sawer?

Hello
Is Power Saver installed now or not? Im a little bit confused
Normally in Power Saver properties you can change the CPU processing speed. If you use the high performance profile, you can use the highest CPU speed. Furthermore this can be changed manual for every profile.
For using Toshiba Power Saver, make sure the Power Saver profile is set as Windows Power scheme

Satellite P100 - choppy sound from DVD and CD

When playing a dvd or cd, the sound is choppy. When playing mp3, the sound is perfect. When playing a game, the sound is fine. What could this be from? I'm using a P-100 with WXP Home edition.
Thanks for any suggestions!

Hello
Maybe this thread can help you. Check it out!

Satellite P100-426 - What sound driver I need for Windows 7 64bit?

Hello,
I have installed Windows 7 64bit to my P100-426. It was no problem but I can't foud a driver for the sound chip and I also don't know wich sound chip is on board.
Maybe someone can help me.
thank's a lot.
sven_lee

Hey,
The problem is hat neither for Windows Vista 64bit or Windows 7 64bit are drivers available for your notebook model. I have checked this on official Toshiba website:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
According the Toshiba page your notebook has Conexant sound chip
But Conexant doesnt provide drivers directly so you have to check the Toshiba website again
I found out that Satellite P300 has also Conexant sound card and there is a driver for Windows 7 64bit available. In my opinion you should try the sound driver from Satellite P300. Theoretically this should work. ;)

Satellite P100-347 - DVD Drive no longer visible in Windows XP MCE

Hi. My DVD drives seems to have disapeared from within Windows MCE running on my P100-347. BIOS can see it, it opens and closes with no issues and the light comes on as if the disc is being read yet it's not being seen by Windows as a drive.
I've installed the DVD-RAM drivers from the Toshiba website but this hasnt made one bit of difference. Any suggestions?

Hi. Thanks for the reply.
Thats the thing. There is no error message or device in device manager relating to the CD / DVD drive. It's not even there as D: drive.
I've tried the knowledge base article and still the problem remains. Does anyone know the product code of the DVD drive that comes with the P100-347? Perhaps I can find a driver for it based on this.
Edit:
Have found the following in the Event Log :
20 May 2007 PlugPlayMa nager The device 'HL-DT-ST DVDRAM GMA-4082N' (IDE\CdRomHL-DT-ST_DVDRAM_GMA- 4082N_______________PT06____\3 04d363050393534353520332020202 020202020) disappeared from the system without first being prepared for removal.
Investigations continue....
Message was edited by: Sull

Three icons for crop tool and others in windows 7

My tools come in 3's since I installed PSE8 on windows 7 (core i 7, 64 bits) mainly crop, move, eyedropper and paint bucket. Others like clone, text and blur are OK. What gives? I had same program on XP and all was working fine.

That's a known bug with PSE. You should be able to set the text size to 149% via Set Custom Text Size and not trigger the Editor bug. Note that the Organizer also has a bug with text sizes -- its menus won't display properly at text sizes larger than 100% unless you apply this workaround:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#The_Organizers_Menu_Bar_doe snt_show

Error during instalation of quicktime and itunes on windows XP

hey
This problem has been brought to everybody's atention several times but a answer was never found, so let's try again.
When installing itunes and Quicktime the following error occurs: Can't open key HKEYLOCALMAchine\software\classes\QuicktimePlayerLib.QuicktimePlayerAPP\CLSID cheack if you have the rights to acces this key or contact support.
This was in Dutch, so i'm sorry for the lowsy translation. I only have one account on my computer, so i have the rights for sure...
Please help me, i have a brand new ipod and i can't do anything with it!
thanx

Joseph,
thanks a lot!
Bernhard
Joseph Marton schrieb:
> On Tue, 17 Nov 2009 10:51:20 +0000, Bernhard Muehlbauer wrote:
>
>> Version 5.30 produced the same error.
>>
>> If I download the nipp.exe to c:\temp e.g. and then execute this file,
>> everything is ok.
>> Both 5.12 and 5.30 work correct if I execute them from c:\temp.
>
> Would you please post your question in the following ZCM forum?
>
> novell.support.zenworks.configuration-management.10.agent-deployment
>
>
>

Installing Bluetooth Keyboard and Mouse in Windows XP Bootcamp

I just installed windows XP in bootcamp. Problem is that my bluetooth keyboard and mouse aren't connected. Short of getting a USB mouse to connect them, is there any work arounds?

Yeah. You will need a USB connected Keyboard and USB Mouse too!.

How to lauch 'Toshiba services and Options'?

When i try to Launch TOSHIBA Services and Options it launches a notepad file titled "index".
How can i resolve this problem?
Many thanks
Robert Dawson

Hi
Seems you are a Satellite Pro A120 owner. Am I right?? I checked you another thread ;)
Anyway, back to this posting. Im a little bit surprised and I wonder what Toshiba tools you mean????
The TOSHIBA Services and Options are not known to me!!!
Where did you find these tools or from where do you want to launch it???
You can find most of the Toshiba tools and utilities in the Toshiba Assist.
This is a reservoir for all preinstalled Tosh tools.
But as far as I know there is nothing like TOSHIBA Services and Options

Can I install WXP Professional on my Satellite P100?

Hello
I have the Satellite P100 - PSPA3C-SD300E laptop and I need to install Win Xp Pro
The laptop came with Win XP home but I need to use a few programs (Microsoft Virtual PC) that require Win XP Pro
Does anyone know of any known issues of using XP Pro on this laptop? I am going to take a guess that there are no issues since it is only 3 months old but I wanted to check.
It would be great if anyone has any views as I intend to upgrade tomorrow
Thanks in advance
Message was edited by: Ben2006

Hi
If you want to install WinXP Pro you have to install firstly the OS and then all the Toshiba drivers and utilities in the right order.
The Win XP Home and Pro uses the same drivers. The difference between Pro and Home is not very big. The Pro has more administration and configuration functions which you can control yourself. The Home version was designed for common Windows users.
Anyway, what you have to do is to install the drivers after the Os installation and you should follow the installation guide line which you can find on the Toshiba driver page.
Good luck

Satellite P100-488 - Installing Toshiba tools and utilities on Windows 7

Similar Messages

Maybe you are looking for