Satellite P100: XP Pro Media Centre - unable to join domain

Recently bought a P100 with XP Pro OS but I don't to be able to join the domain at work properly. Normally create a new account on the Server SBS 2003 then from the PC 'join domain'.
Any clues?
Peter

Thanks for that but I do find it difficult to see where the logic comes from. It is fairly safe to say that XP Media Centre should work OK as I understand it to be a complete version/implementation of XP Pro with a few whistles and bells on the AV front? XP Pro certainly allows a domain to be specified so why doesn't XP Media Centre?
Peter

Similar Messages

Mac Pro Media Centre

I want to turn my 1 Year old 2.66 MP into a media centre serving the rest of the portable macs in the house as well as being hooked up to the main HDTV in my living room. The TV is also hooked up to my cable providers box.
In a nutshell I want it to be able to:
1. Play DVDs etc on the HDTV like Front Row does (However I will not install a hack to make this work)
2. Record stuff from the TV, not bothered about Tivo type optons (This is he bit confusing me)
3. Show photos on the HDTV using something like Front Row (However I will not install a hack to make this work)
4. Be connected to the laptops via Airport (I have this bit covered)
I have the 7300GT DVI card in it, do I just need a DVI > HDMI cable to make the hardware work? I have looked at the Elgato software but could do with some recommendations there BTW.
Is this feasable to do, or do I need extra PCI cards for the Mac Pro?

Well I'm not sure I understand every question, but here goes with some suggestions and answers.
Connecting your Mac Pro to your HDTV should in most instances be a simple process. Most HDTV's have a VGA style connection for a PC (or Mac). They also have an HDMI input. You can use either. In one case you use the DVI to VGA adapter that came with your Mac. For the other you use a DVI to HDMI adapter available from third parties.
One important note. Some HDTV's may not support native resolution on all inputs. Example, your HDTV may be 1080p capable on the HDMI input, but support a lower resolution on the VGA input. For best results you want to run your video at the HDTV's native resolution, so check your TV's manual.
Recording will dependent on what type of hardware you have for video input. One option for you if you have cable, is to use a cable HD set top box that has a firewire output. This output will contain the uncompressed HD video stream, which can be recorded directly onto your Mac using D-VCR like software, which Apple happens to have available from their development site. With this arrangement you can record a HD video stream and play it back. The only real thing lacking is there are no embedded time codes in the video stream. This mean you can't jump around the video easily.
Other recording options include devices from Elgatao and others. Which you want to use will depend on what type of video source you have, cable, Over the Air, FIOS, etc. the EyeTV 250 plus is a good choice for basic video recording, and the HDHomeRun is a good choice for over the air digital and HD or Clear QAM cable broadcasts.
As for pictures, that is one of the functions of Front Row, so use Front Row.
As far as playing DVD's... put the DVD in the Mac and use either Apples DVD player or VLC or use Front Row its up to you.
Your video card is more then sufficient for HD playback, no need to do anything with it.
Tom N.

Unable to join domain when OD Master is set up as PDC

Hi all,
I'm working on trying to get my OD server to authenticate our new windows vmware workstations. I have both LDAP and Kerberos set up, and everything works really well with my OS X clients, as do our Linux servers. However, I'm unable to get our windows clients authenticating. I can browse the "spidertracks" computer as well as the Samba shares, so the shares themselves are working. I'm simply unable to join our Windows 7 64Bit clients to the domain to authenticate with OD accounts. Here is what I have configured in the samba settings. Am I missing something? I've read the manual nearly 20 times, and joining the domain simply doesn't work, so I'm guessing I've missed a configuration somewhere when creating my Kerberos realm. Is there a command I can use to validate my samba settings are correctly running as a PDC?
Thanks,
Todd
LDAP config dc=spidertracks,dc=local
Kerberos Realm: SPIDERTRACKS.LOCAL
Samba Settings
MAIN
Role: Primary Domain Controller
Description: Spidertracks
Computer Name: Spidertracks
Domain: SPIDERTRACKS
ACCESS
Authentication: NTLMv2 & Kerberos, NTLM
ADVANCED
Wins Registration: Enable Wins Server
DHCP Settings (on different machine, Free BSD Based)
WINS Server: 10.0.1.11 (My OD server's IP)

Bump:
Rather than starting a new thread,
I am fighting with the same thing on one of our servers, this is an issue that was fixed by the Samba guys, but I can't deploy their fix and still use OD.
I'm starting to think that our experiment using OSX instead of linux as a server may be at an end, I keep spending a lot of effort chasing down issues that are solved months ago on linux.
Somebody help, I dont want to be told to get rid of the shiny Mac ( or more likely bootcamp it to linux )
--Bill

XP Pro SP2 PC can't join domain

I had a crash and restart with an XServe that was acting as OD Master and PDC for several users. Now the trust relationship has been disrupted and I can't get the PC's to rejoin the domain. When I try, the XP box gives a message that "the user name could not be found" and the NETSETUP log on the PC shows the following:
11/16 11:04:52 NetpDoDomainJoin
11/16 11:04:52 NetpMachineValidToJoin: 'TULKAS'
11/16 11:04:52 NetpGetLsaPrimaryDomain: status: 0x0
11/16 11:04:52 NetpMachineValidToJoin: status: 0x0
11/16 11:04:52 NetpJoinDomain
11/16 11:04:52 Machine: TULKAS
11/16 11:04:52 Domain: bbcmpls
11/16 11:04:52 MachineAccountOU: (NULL)
11/16 11:04:52 Account: bbcmpls\diradmin
11/16 11:04:52 Options: 0x27
11/16 11:04:52 OS Version: 5.1
11/16 11:04:52 Build number: 2600
11/16 11:04:52 ServicePack: Service Pack 2
11/16 11:04:52 NetpValidateName: checking to see if 'bbcmpls' is valid as type 3 name
11/16 11:04:52 NetpCheckDomainNameIsValid [ Exists ] for 'bbcmpls' returned 0x0
11/16 11:04:52 NetpValidateName: name 'bbcmpls' is valid for type 3
11/16 11:04:52 NetpDsGetDcName: trying to find DC in domain 'bbcmpls', flags: 0x1020
11/16 11:04:52 NetpDsGetDcName: found DC '\\GONDOR' in the specified domain
11/16 11:04:53 NetpJoinDomain: status of connecting to dc '\\GONDOR': 0x0
11/16 11:04:53 NetpGetLsaPrimaryDomain: status: 0x0
11/16 11:04:53 NetpGetNt4RefusePasswordChangeStatus: trying to read from '\\GONDOR'
11/16 11:04:53 NetpGetNt4RefusePasswordChangeStatus: failed but ignored the failure: 0xc000000f
11/16 11:04:53 NetpLsaOpenSecret: status: 0xc0000034
11/16 11:04:53 NetpGetLsaPrimaryDomain: status: 0x0
11/16 11:04:53 NetpLsaOpenSecret: status: 0xc0000034
11/16 11:04:55 NetpManageMachineAccountWithSid: NetUserAdd on '\\GONDOR' for 'TULKAS$' failed: 0x8ad
11/16 11:04:55 NetpJoinDomain: status of creating account: 0x8ad
11/16 11:04:55 NetpJoinDomain: initiaing a rollback due to earlier errors
11/16 11:04:55 NetpLsaOpenSecret: status: 0x0
11/16 11:04:55 NetpJoinDomain: rollback: status of deleting secret: 0x0
11/16 11:04:55 NetpJoinDomain: status of disconnecting from '\\GONDOR': 0x0
11/16 11:04:55 NetpDoDomainJoin: status: 0x8ad
So it's seeing the server as the PDC of the domain, but the NetUserAdd is failing. What should my next move be?
Thanks in advance,
Andy

I had a crash and restart with an XServe that was
acting as OD Master and PDC for several users. Now
the trust relationship has been disrupted and I can't
get the PC's to rejoin the domain. When I try, the
XP box gives a message that "the user name could not
be found" and the NETSETUP log on the PC shows the
following:
is the computer still listed in WGM under windows computers ?

Unable to Join Domain

I bought a new laptop running Windows 8.1 and when i tried to connect it to my Domain network, I found that Network ID button is disabled then i went to services.msc and check for workstation.... the service was already running. My Server runs on Windows
2012.
Please help....

Hi,
Make sure that you have install "Client for Microsoft Networks" under Network adapter -> Properties.
Kate Li
TechNet Community Support

WDS Unattended Mode - unable to join domain with errors shown in UnattendedJoinDCLocator.etl

Scenario
XP Client machine rebuild to Window 7 from PXE Boot image with unattended XML File (Verified Unattended XML is GOOD). From the UnattendedJoinDCLocator.etl
indicate some errors. So far tried 4 machine with same error message.
All machine are listed trusted domain and same network subnet.
Error 1:
31: Cannot NdetpSrvNext 9003 0x232b
Cannot find A record
Error 2:
Sent out 'Sam Logon' message to \\prod.domain.com*\MAILSLOT\NET\NETLOGON on all transports
NetpDCSendPing: cannot write netlogon mailslot: prod.domain.com 0x0 53
NIBrowserSendDatagraam: returend 0x 35
NetPDCGetNameNetbios: prod.domain.com : CannotNIBrowswerSendDatagram (ALT) 53
NetDCGetName: NetDCGetnameNetbios returned 1355
NetDCGetName: prod.domain.com: IP and Netbios are both done
DsGetDCnamewithAccountW: DsLocalGetDCname returned0x54
NetpDCGetDCNext: _ldap-_tcp.dc_msdcs.prod.domain.com.: Cannot Query DNS. 9852 0x267c
NetpDcGetNameIp: prod.domain.com: IPnot configured from DnsQuery.
NetDcGetname: NetpDcGeNameIp returned 9851
.........message keep repeated.

Hello,
WDS specific questions please ask in
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserversetup
If I understand you correct you have 2 domains and the WDS is in the other domain that is trusted, which kind of trust? Or are they all in the same domain?
How is DNS configured in the domain(s)?
Please post an unedited ipconfig /all from the DC/DNS servers and also the DHCP scope settings you use for the WDS installation.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Px12-350r unable to re-join domain - what to do now?

Hello everyone!
I hope you can give me some advice because at the moment I am in a really stupid situation, being probably locked out of my Iomega px12-350r.
Here's what happened:
* The device has been successfully joined to my Microsoft AD domain and has been running with this config for at least a year.
* I expanded the storage array 2 days ago, adding 2 disks. Everything went fine and when the expansion completed, the new total disk space was displayed correctly in the admin web interface.
* After that, I rebooted the device. After the reboot, I could not log in to the device any more using my domain account. This account has had admin rights on the NAS and I have logged into the NAS using this account before.
* I did not change anything in the domain infrastructure.
* I know that the device cannot join the domain anymore because I activated email notifications and it keeps sending me "Unable to join domain".
I already tried:
* Login using the usual local accounts: Does not seem to work once the device is joined to a domain.
* Login via SSH. Does not work, probably for the same reason as above.
I did NOT try yet:
* The user manual mentions resetting the admin password by pushing the reset button on the back. But will this only reset config (I would be ok with that) or will it erase the data on the drives as well?
I am from Germany. Despite having purchased a 24x7 service plan, German support hotline will only redirect me to the American hotline who claim to do only desktop NAS, no px12's. I am kind of in the middle of nowhere now. ;-)
Thanks for your help!
Best Regards,
Florian
Solved!
Go to Solution.

Hi qaware,
Just to clarify, are you talking about logging into the device's web interface or logging into your active directory client?
I would first recommend rebooting everything and restarting your client in case there are more than one sessions open.
What credentials are you using to log into SSH? User should be "root" and password is "soho + admin password". Make sure you are not using any special characters.
You could do a reset from the back of the device. This is not data destructive, but it will reset user and network settings so you will have to set the device up again, rejoin the domain and import the AD users and groups.
Are there any other admin users you could try logging in under?
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Satellite P100-347: Blue screen appears on start up - unable to boot volume

Recently I left my 2 younger brothers playing NFS Carbon on my satellite P100-347, preinstalled with media centre 2005 edition, and now it fails to startup.
During the startup process eventually a blue screen is displayed for about a second and then it shutsdown (I manged to make out the words "unable to boot volume" from the blue screen).
I tried booting with an XP media centre DVD but it only gives me an option of reinstalling the OS with a price of losing all my very important data. Normally I would have recovered the system but I don't want to lose my data.
Is there anything i can do other than taking it to a technician?

Hi
Well, mostly the BSOD appears due to a hardware problem or serious software issue.
In your case the software problem is possible
Unfortunately, I think the new OS installation is the best way to get the notebook running correctly.
Now you want to know how to save the data and files well, I think you should remove the HDD from notebook and should try to connect the 2.5 HDD via external USB controller to another computer. Then you could save the files on the other HDD
I think, now you know that the regular backups are important and necessary!!!!

Satellite P100: Memory Stick Duo Pro with MSD adaptor is not recognized

When I insert MSDP in the multi card reader of my Satellite P100-473 - Vista preinstalled - (using a MSD adaptor), the Removable media is listed in the Explorer but the card cannot be read.
With a 32MB card, it reports that card should be first formatted... but correct data are inside and should be visible.
With 1GB card, it reports that a card shall be first inserted...
Does anyone has already experienced this issue ?

Hi
Did you check you user manual ????
Take a look into the chapter 8!!!
There you will find a information that the card reader supports only SD; MMC; MS; MS Pro and xD cards.
As you see it supports the Memory Stick Pro but Not the Memory Stick Pro DUO!

Looking for Satellite P100-PSPA3U driver's for XP Pro SP3

Hi,
I've been looking for the driver's for the Toshiba Satellite P100-PSPA3U. I've try to get the driver's from the European website but I could found them.
I really will appreciate if someone could help me with this issue.
The laptop has Windows XP Pro SP3 32-bit English version.
Regards,
Cesar Garnier

Hi Cesar
What is country of purchase? It is P100-xxx?

Satellite C50-A-157 Sandisk USB won't work in Recovery Media Centre

I can't get Sandisk Cruzer USB to work in Recovery Media Centre. Have tried formatting but no luck.
I read on another Toshiba forum that Sandisk USBs don't work and that you have to use a different brand.
Anyone know if that's true?
Thanks

To be honest I dont think that all Sandisk USB flash memory stick dont work in connection with Recovery Media Creator. But of course due to some compatibility issue between the device and software, it could be possible that an USB flash memory stick would not be recognized.
I never experienced such problems with my Recovery Media Creator software.
I could create a recovery medium using two different USB sticks from two different manufacturers. One of them was a flash memory stick from SanDisk.

Video stuttering on Satellite P100

Hi..
I have got a Satellite P100-347 ( PSPA6E), with WXP media centre as the operation system. Every time I want to watch a DVD using media player, real player, media centre or WinDVD the video is stuttering and the video and audio are not running smoothly.
If I want to use the quick media (from shut down , pressing the media quick button, it wont start windows, it will only start the media section) then the screen will freeze few seconds after starting the DVD. I will have to hold the power button until the laptop turns off.
Any suggestions please.

Hi guys,
did you already tried to install a codecpack like the K-lite codecpack which is free and contains all needed codecs for watching movies no matter which format (Divx, Xvid, DVD, etc..)
If not, try it (http://k-lite-codec-pack.softonic.de/) and by the way: update your display drivers if not already did. It helps sometimes...really. :)
Greets

Satellite P100: Fatal Execution Engine Error code Ox7927e03e

The above error message (code Ox7927e03e) appears every time I restart my Satellite P100.
Various suggestions on the Microsoft XP website to update/repair Net.Framework don't work.
Any ideas? The computer works normally except for Media Centre which generates the same message.

You could firstly use the Windows own system restore tool. This tool will turn back the OS to the early point. If it does not work you could use the Toshiba recovery CD. On this CD everything was preinstalled and this installation will set the notebook back to the factory settings

Satellite P100: No Windows Vista CD but only Recovery CD

Hi I recently purchased a toshiba satellite P100, but it doesn't seem to have come with a Windows Vista disk, just preinstalled Vista.
The laptop is running fine at the moment, but I'm a bit worried that if something goes wrong in the future i'll have no way to reinstall the OS.
The laptop came with a recovery disk, and I'm not sure if Vista is included on this?
If not is there anyway I can make a copy of vista from the one installed on my HDD?
Thanks

Hi,
dont worry, you dont need to make a copy of your HDD since you already have a vista on your recovery media.
If you got problems with your system and you want to re-install it, then backup all your data to a external media, put the recovery in your CD/DVD drive, boot from it and then just "recover" or "reinstall" your system. The recovery process is working automatically and you will have a "factory-like" installation after recovering your machine.
Hope I could explain it to you... ;)
Greetings

Windows 8 Upgrade on Satellite P100-160 - No Sound

Hello everyone.
I own a Satellite P100-160 {http://www.toshiba.co.uk/discontinued-products/satellite-p100-160/}
I decided to upgrade the machine from Windows Vista to Windows 8.
The machine works o.k. apart from the fact there is no longer any sound.
It seems that windows 8 does not have the correct sound drivers.
Can anyone help me out with a solution?
The laptop is in good working order, and apart from no sound.
Thanks
colesdav.

Hello, thanks for your replies so far.
Just in case anyone else out there has tried to move to Windows 8 on an older laptop I will tell you
What I have tried that did NOT work.
(1). http://www.boards.ie/vbulletin/showthread.php?p=81760022
(2). http://www.station-drivers.com/page/conexant.htm
(3). http://www.dell.com/support/drivers/us/en/04/GetDriver/InitiateFileDownload
(4). http://drivers.softpedia.com/get/SOUND-CARD/Conexant/Conexant-HD-SmartAudio-HD2-Driver-436761-for-Windows-7-x64-Windows-8-x64.shtml
(5). http://www.toshiba.co.uk/innovation/download_driver_details.jsp?
None of the above suggestions / drivers worked.
The drivers all did install but ... no sound from the Laptop.
I accept this is an old laptop but it is in mint condition.
Here is my solution to date.
I bought a Sound Blaster X-fi Go! Pro external USB Sound card from Maplin U.K. yesterday.
It works and the sound quality is great!
I am currently using an external speaker ... but I may try to install the USB sound card inside the
Laptop and see if I can rewire the speakers ...
Here is a link to the USB Card.
http://uk.creative.com/p/sound-blaster/sound-blaster-x-fi-go-pro
By the way I have managed to upgrade 3 of my 4 laptops from Windows Vista /7 to Windows 8.
Here is what worked with comments.
Toshiba Satellite P100-160 - Vista to Windows 8. Only problem = No sound Driver.
Toshiba Satellite L300D - Vista -> Windows 7 - Windows 8. No problems at all.
HP G62 - Windows 7 -> Windows 8. No problems seen yet.
The only machine I cannot upgrade is an HP Envy 15-1060ea due to notebook specific ATI Radeon 4830 Driver.
Thanks
Bye
Colesdav

Satellite P100: XP Pro Media Centre - unable to join domain

Similar Messages

Maybe you are looking for