Satellite P20: BlueTooth and error message
Hi,
Starting any of the Bluetooth utilities I am receiving the following error message.
"Could not open the Bluetooth ACPI device driver (tosrfec.sys) Try again?"
I have uninstalled and reinstalled the Bluetooth drivers but this had not resolved the problem.
Any suggestions how I can overcome this problem and start a Bluetooth session would be appreciated.
Thanks, Geoff.
Hello
I dont know which P20 you have exactly (P20-xxx) but as far as I know P20 is not delivered with Bluetooth. Some models are Bluetooth ready (P20-824). If the notebook has a Bluetooth at the bottom side of the unit there must be a small Bluetooth label. Check it. He installations image is the same for whole P20 series and it is possible that the Bluetooth utility is preinstalled but can not be used.
Bye
Similar Messages
-
I updated to iTunes 12 and didn't like it. Followed advice to revert to 11.1. Now my iPhone 5 won't sync and error message says I need iTunes 11.2 or higher. Apple Download choices didn't have anything between 11.1.5 and 12. What can I do? Using iTunes 12 is not an option. Many features I used for audiobooks have disappeared.
The version immediately prior to 12 was 11.4.0.18. Here are direct download links from Apple's servers:
iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
tt2 -
I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder."
I have tried a few things but iTunes closes right after i click okay. Anyone know anything?Look in your Home > Music folder. There should be an iTunes folder there and it should have a number of files and folders including one called library.itl You want to guide iTunes to that file. If you don't see that file or folder then in your next post you will have to be very specific as to what you do see or how you have your iTunes set up because that's where it should be according to default settings.
-
I have design standard with creative cloud, I have installed this on 2 computers, my office and home which I was told was allowed, I have just tried to open an indesign file from the office at home and and error message said that this was created with a newer version? they are the same versions and both are up to date, I was asked this morning to put in my adobe id email and password to connect to CC which I have never been asked to do before, can anyone help?
what's your home version (click help>about) and was that just a warning so you were able to open the file?
-
trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"
i have the same problem with my 3gs and tried to add my email acc+pass in the outgoing server but it got rejected.
just bin on the phone(45min) with my carrier support about this issue they are pretty much scratching there head, the settings i should use gets verified with no problems when i add the outgoung server, but still cant send mails. -
Hello,
Just purchased online Adobe Acrobat XI Pro and error message appeared, but payment has been debited from my credit card already and I do not have the software, so paid for nothing.
I am using a Mac OS X.
Thanks for your help.
Ossama[discussion moved to Acrobat Installation & Update Issues forum]
-
My problem - when syncing and error messages comes up: iTunes could not sync calendars to the iPhone because an error occurred while margin data." I've tried turning the phone off and back on, & tried both USB ports but get the same thing. What can I do next since it doesn't give me even one clue as to what the error would be?
Before I started to resync calendars one by one as suggested in the troubleshooting article, I remembered something that came up in a sync when I first attempted : a 'which one do you want to keep' message about a repeating calendar event, which came up with three options, one from Calendar, and two from iCal on the phone. I deleted that event, then went through the calendar resync one by one, and all seems OK now.
In Music there is a way to find 'ghost' items that show up as grayed-out on the menus, so that you can try to reassociate or delete them. It would be nice to have a similar way to work with Calendar!
Thanks for pointing me to the right article. -
I am trying to re-install Photoshop CS6. The files have downloaded but I get and error message that the Adobe Support Advisor is required to determine what the installation probIem is. I click on the link that says "get the Support Advisor here only to be told the Support Advisor no longer exists!! A blind loop. I need to have Photoshop CS6 installed...what do I do from here??
The CC Cleaner Tool assumes the Akamai Download Manager is activated and it has not. It seems to be the missing file that triggers the error message. \in a previous re-install I was prompted to download & install the Akamai Download Manger, but not this time. Is there somewhere on the Adobe website that I can download it??
-
Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?
Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?
-
i have an iphone 4 and i just updated to ios5 and i can't get my music to stay on my iphone and i also keep getting and error message when trying to restore iphone. anyone else having this problem?
When you restore, which error # appears?
-
HELP! I try to open the program after installing it and I receive and error message: Error: 213:11
This issue is covered under document: https://helpx.adobe.com/creative-suite/kb/error-store-does-not-allow.html
This error occurs when the SLStore Folder is set to read-only. To resolve it, remove the read-only check from the SLStore folder (Windows) or give it read/write access (Mac OS). step in the link above. -
iTunes auto-update dowloaded and installed on 28/01/2014. iTunes now won't launch and error message states file MSVCR80.dll is missing. Tried unistalling and downloading/installing again to no avail. Any clues?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99269) -
I recently just bought a Toshiba 3TB External Hard Drive. I am trying to partition it on my macbook, but it keeps returning and error message. The only thing I have changed is renamed easy drive.
Your problem is not Boot Camp, in fact, is your optical drive. Win XP requires indeed sp2, but also the internal drive, does not work from external optical drive.
For other possible tricks, please use the appropriate Boot Camp forum, not here. Mac OS X may be installed from both external and internal optical drive and/or internal/external partition of a disk, any disk. Windows is not so generous. -
Images with success and error messages
Hi,
I am using theme 20. I want to add a success image on all success messages and an error image on all validation failure messages. I can do this by putting img tag in messages individually. Is there an easy way by which I can make sure that all success and error messages are always displayed with a corresponding image without including img tag in every message?
Thanks,
BhaveshHi Bhavesh,
in page template there is Subtemplate region related to success, error and notification messages. You can put there your HTML tags and add some css class or image for every page using this template.
Regards,
Przemek -
Putting a row into a pageable cache failed with error 9 and error message
Hi Guys,
I am fetting the follwoing message when the job is scheduled.
Putting a row into a pageable cache failed with error <9> and error message <Db::put: Bad file descriptor>
I read the forum and Manoj has suggested to one of the forum member to change the size of the Pcache setting through the server manager. But I do not see the setting there. can any one please let me know where exactly I can see and increase the size of the Pcache.
ThanksHi
I've had the same problem. We know from other (more meaingful) error messages that we ran out of space for the Pageable Cache, but we've just increased it by 50GB and still get the same error.
Anyone??
Btw i don't think you there is a setting for PCache size - it will just use all the free disk you have on the drive where you have located the PCache directory.
Richard
Maybe you are looking for
-
Business Workplace - "Tips & Tricks"
I've just noticed a very, very cool feature in Business Workplace. When you go to your Inbox, and you hover over "Tips & Tricks," something appears, a bit like a Windows tooltip, except far more useful and far less annoying. Does anyone know how I ca
-
Using BAPI's or RFC's to Create a new BI Master Data
Hello SDN Guys. I am trying to create an application to mantain BI master data and would like to know if you can help me to find a specific RFC or BAPI that I can use in VC . The parameter should be the infoobject name and their attributes to be cr
-
Initial View using PDF Portfolio HELP
Using the new PDF Portfolio Feature. I went to file>portfolio properties and select initial view tab. I changed magnification level to "Actual Size", however when i open the pdf, the initial view is not 100%. Can anyone help me?
-
One step purchase order approval
Hi, I have activated the one step PO approval workflow. How do I assign the agents. I have tried to do it in SPRO - Maintain agent assignemnet for tasks but was unable to do it as I did not get the link. Any help is appreciated. Joe Vellaiparambil
-
Access Denied Error when Installing Suitcase
I am encountering an Access Denied Error when installing Suitcase X1 on a 600 MHz G3 ibook running 10.4.3 with all updates and it gets to 2 items remaining to be installed and I get access denied error and then another screen pops up and says "You do