Satellite P20-S203 shuts down suddenly

Hi,
In the last month my Satellite P20-S203 is not behaving so well, and unfortunately it seems the problem is a hardware one (but I'm not sure, and that's why Im writing here)
The computer just shuts down suddenly (it happened 2 or 3 times in the last 30 days); all the times it did happen I was on the web on Firefox, but I'm pretty sure it has nothing to do with that, and I'm also 99% sure it's not a virus, malware or anything like that, cause I formatted about 3 months ago, and nothing else behave in a strange way, the computer is not slow or anything like that.
The last two options are that the issue may be of hardware nature, or of a software one (like a conflict between installed programs and the OS); I'm more for the first one, but I'm not sure and I need help to find out... What should I do?
Also, when it suddenly shuts down, it won't turn on with the first try.
It needs like 10 or 20 times to open, like an old car that doesn't start; the first, say, 5 times I try to turn it on, it will only display the toshiba logo.
Then it passes through a screen I cannot read because it's too fast.
Then to a black screen and finally it turns off again.
With the next tries it goes a little bit more far, like it displays the windows logo, but, as that picture fades in, it stops at half of the fading process, resulting in a darker windows logo, like it's too hard for it to load the OS!!
But then it goes off again!
Then after some other tries it finally loads windows.
Any help would be highly appreciated, thank you!
OS: Windows XP SP2

No it's ok Jayjay, I purchased this morning the right screwdriver (here in Greece these type of screws are called "French" or most internationally "torx" screws).
So I took away the cover above the fans, unscrewed the heat sink, removed the heat sink and together with that the cpu came up. I've now removed the old thermal grease and I'm ready to put the new one.
I like to mess around with things, I like to assemble and disassemble, I like to know how things work...but I also know, thanks to my personal experience, that there's no way not to make any damage when you mess around :) but that's ok with me, I' m used to it, as soon the pc will open once finished :D
Anyway, I have to admit that if I worked with a little more method now everything would be ok, like making a map of the screws, knowing where to put them back, because now two screws on the back won't mount any more (precisely the F6 screws on the back panel, where the usb, vga and parallel connectors are), and two more screws are in excess (!) If someone has the time to do it, please unscrew just these two screws (the F6 on the back) and post a photo of the screws, or just tell me the height, even if I'm sure that the problem is elsewhere.
Goodbye

Similar Messages

  • Satellite P20-932 shuts down because temperature is too high

    When I use my Satellite P20-932 for about 30 min, the temperature increases very quick! The laptop is turning-off automatic, without any error message.
    I try to clean ventilator on the bottom of the laptop.
    I'm really desperate.
    Please help me!

    Its a simply case of overheating.
    The notebook shuts down automatically to prevent the notebook from the damage. It seems the temperature has increased to the critical level.
    I assume the notebook is a little bit older and the cooling modules and the fans inside the notebook cannot run properly because of the dust and debris.
    The cleaning of the cooling modules is a great idea but you should be careful.
    If you have no experience, asks a technician for the professional cleanup.
    Additional you should be sure that there is enough free space around the notebook. Its important for the properly air circulation.

  • Satellite P10-804, machine shutted down suddenly

    hi all!
    i bought my laptop 2 years ago and recently found that the laptop shut down suddenly without any notice.. not bcos of the virus as there's no symtom about that.
    I'm not sure if the laptop is too hot or what reason caused the machine shut down. and as I'm now not living in UK and in my country, this model had not be launched so i cannot check the machine in my country.
    if anyone had this problem or if anyone know the reason, please let me know! thanks!

    Hi,
    have a look on this topics:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=6072
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=6382
    Bye

  • Satellite A110 shut down suddenly - CPU fan is not working

    Hello!
    The CPU fan on my brand new A110 is not working. The notebook will shut down suddenly, without hibernation or standby for any CPU consuming activity.
    Can it be linked to a configuration/ software problem? If so, how to check it?
    Many thanks.

    Hi
    For me it seems like a hardware malfunction. If the fan does not work as it should then it has nothing to do with the software.
    The A110 seems to be a very new unit and I dont think the dust and debris are responsible for such automatically shut downs.
    Why you dont take your warranty??? If the warranty is valid everything should be checked and replaced for free

  • Satellite P10-554 shuts down after few minutes and I can not reboot

    hello,
    i hope anybody can help me with my satellite P10-554
    when i start the notebook everything works fine a few minutes. than the monitor turns into black and the notebooks shuts down suddenly. i cannot reboot it, when i push the start-button nothing happens.
    i have to wait for about an hour and then i can start it up again, but he works just a minute and shuts down again !
    help me please, cause i need my notebook to work !

    I did that many times. First you need a special torx-screwdriver. Then you can remove the cover over the fans. Than take your vacuum-cleaner and remove the dust. Take a brush or somethin else to remove the dust from the fans. Then, you need to remove I think 2 big screws, now you should hold the cooling falance in your hands, the one with the fans. Clean that properly.
    After that you can remove the copper-cooler, with 2 more screws I think, but it is pretty obviously. Now you should see the blank cpu with lots of heat-paste on it. I dont know why they put so much of this stuff on it from toshiba. So get a better one like Arctic-Silver or sth. My advice is to take the CPU off (one screw on top as far as I remember) and clean the surface.
    The copper you can clean under water, but dont use sth that could scratch the surface. After that let it dry good. Now just put the CPU back and fix it with the screw again. Take a !litte! heat paste and put it properly with a paper all over the surface of the CPU, but remember, just a little! Then follow all steps back, dont forget to clean the graphics-chip as well and put some paste on it. You can see which it is when you look under the fan-cooling-falance, there should be a rest of heat-paste. Everything back to its place and voil*, a nice, cool clean notebook. By the way, I replaced even the fans.
    If you need further advice, just ask!

  • Satellite P10-832--- Shuts Down

    Hi
    From a couple of weeks my Satellite P10 shuts down suddenly
    It happens with
    1)Battery
    2)AC adapter
    3)Battery + AC adapter
    Why?
    I downloaded a bios update but it's always the same
    I formatted about 3 times, without doing any internet connections (someone said to me it could be a virus from internet), but it shuts down even if the O.S. is just formatted and empty (with an antivirus)
    I checked my CPU temperatures and I saw that it could shuts down at 36C or 39...or work at the best at 43C!
    (so I escluded a temperature problem)
    But I saw that when the CPU USAGE goes over the 50% the machine stays for a couple of seconds, or minutes (if I'm lucky!)...then shut downs once again!
    The same problem happens to one of my friend, with the same computer!
    I can't play any videogames or do any complete scan with my antivirus of because the CPU USAGE goes over the 50%!
    Is it an hardware problem?
    Thanks
    Jacopo
    (Also have Win XP H.E.\SP2\Norton Antivirus 2004\Zone Alarm Firewall\Microsoft Anti-Spyware)
    (Sorry for my rude English!)

    Hi again
    Xaver is correct. Yesterday I've used a can of compressed air and was able to blow a lot of dust from the cooling system of my laptop. Then I placed the 'cleaner' laptop onto the USB cooler I had purchased and I launched a complete scan with McAfee. Well it went through without crashing. Then I launched a game (Battlefield) which was making the laptop to shutdown after a couple minutes, and I was able to play for a full hour before I decided that the test was conclusive.
    My next step is either to find the appropriate screwdriver and proceed to clean the cooling unit more thoroughly or simply bring the filthy beast to a store that would do it for me.
    Cheers and happy spring cleaning !
    Franois

  • IMac shut down suddenly and won't boot back up

    This morning my iMac shut down suddenly.  All I had open was Google Chrome and I was just on Facebook and that's it.  When I tried to boot it back up, it wouldn't load past the startup sound, wherein it would appear to shut back down,or at the very least the screen would go black (my mouse has lights that stay on when the computer is on, and the light kept going on and off while the screen remained black).  This was the case for at least a half hour until it suddenly booted itself back up all on its own.  I had it on throughout the day, just browsing the internet and watching Youtube. It shut itself down twice during the day, and both times it restarted on its own right away after showing me a grey screen with the Apple logo and a progress bar.  Now it just shut itself down again and it won't make it past the progress bar screen - if it even makes it that far, sometimes it shuts off right after it makes the startup sound.  It keeps trying to boot up on its own over and over again, but it keeps shutting down right away.  All the fixes I've searched for so far require a computer that actually boots up all the way so I don't think I could run any reports if I tried!
    I'm running the latest version of Yosemite (10.10.2?). 
    Model number A1311
    Not entirely sure what specs are useful to know so I'm just gonna write some of what's on the box it came in:
    3.2 GHz Intel i3 processor, 4MBshared level 3 cache
    4GB of 1333MHz DDR SDRAM
    1TB serial ATA hard drive
    ATI Radeon HD 5670 graphics processor with 512 MB of GDDR3 memory
    Bought it around fall of 2010.  Not sure if it's worth trying to get it fixed (I live nowhere near an Apple store) or if I should just get a new computer, but I would like to know what's wrong, if possible.

    Try to boot into the Recover Partition by holding down the Command + R keys on startup. If it still won't boot then the HD has probably crashed. The is likely a AASP in your area, you can locate one by clicking AASP Locator, take it to one to be professional diagnosed. If it's only the HD, assuming you have been backing up, restoring to a new HD is pretty simple.

  • I was working on a word document  and the computer shut down suddenly.

    I was working on a word document  and the computer shut down suddenly. I got a grey screen with a message that your computer shut down because of a proble. It was written in various languages. It asked me to press any key to restart. I tried to restart it but the wheel just kept going on and on. So I shut it down and I tried to restart it. But I still keepgetting the wheel under the apple symbol and nothing else.

    See
    About kernel panics,
    Technical Note TN2063: Understanding and Debugging Kernel Panics,
    Mac OS X Kernel Panic FAQ,
    Resolving Kernel Panics,
    How to troubleshoot a kernel panic, and
    Tutorial: Avoiding and eliminating Kernel panics for more details.

  • Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What I can do?

    Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What  can I do?

    Try booting to the Recovery drive, running Disk Utility and Repair disk and Repair Permissions.
    1. Reboot and immediately hold down command and R (two keys).
    2. When you see the screen shown on this page, select Disk Utility and continue.
    3. When DU is running, select the hard drove on the left, First Aid and Repair Disk.
    4. After Repair Disk, click Repair Permissions.
    Quit DU and restart.

  • My lenovo G505s shuts down suddenly and key board stops working at times

    Hi,
    I have bought this laptop 10 days ago, I am facing two problems 1st is, it shuts down(suddenly off not proper shut down) while working without showing any error message, and the problem no 2 is its key board stops working at times, system is working fine but all the buttons of key board are not responding. it will work when I restart the system.
    please help what should I do, could it be replaced?

    Welcome to the Lenovo Community !
    Sorry to hear of your problems.  I would suggest that you try a reset of the BIOS just to rule out any hardware conflicts the system may have.  Try this........
    1. Unplug the charger / adapter.
    2. Remove the battery.
    3. Press and hold the Power Button for 15 seconds.
    4. Re-install the battery, plug in the charger / adapter if needed and power up the system to see if the problem was resolved.
    If the problems weren't resolved by doing the reset then I suggest you contact Lenovo Support for warranty service.  Both the problems you mentioned could be related to faulty hardware and the service center would be best equipped to check out your new laptop.  You can find the phone number for Lenovo Support in your country or area by using the link below....
    http://support.lenovo.com/us/en/supportphonelist_alt1
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • My imac is 2008 model.  It shuts down suddenly often by itself.   Any idea how to fix?

    My imac is  2008 model  OS X (10.5.8) .  It shuts down suddenly often by itself.  And sometimes not able to restart.   Any idea how to fix?

    I know exactly what you are going through. I am almost 100% sure it  has to be due to these other failures involving temperature. Mine is in this group. Here is a further discussion:
    Re: 75% failure rate on 24" iMac hard drives?
    created by John P. in iMac (Intel) - View the full discussion
    As an anecdote, our 20" early 2008 iMac has been running fine since we bought it nearly three years ago. The AppleCare is up at the end of this month so unless Murphy's Law notices we expect another year or two out of it before we upgrade it. It's on probably 18-22hrs out of every day.
    Reply to this message by going to Apple Support Communities
    Start a new discussion in iMac (Intel) at Apple Support Communities
    You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.

  • Toshiba Satellite A300-20T shuts down after 5 seconds!!

    my laptop satellite A300-20T shuts down after 5 seconds of booting , i dont know why ?? and i searched for support in the website and didn't find it in the model list, also i don't know why ???!!
    i want to know why it shuts down , and how can i communicate with support

    Yours would not appear to be a US model. We need the Part Number for your laptop, like PSAG8U-05K02C. You can find this on the Toshiba label on the bottom of your laptop. As well, what country was it originally purchased in. In addition, what is your operating system version, like Windows Vista 32bit?
    Mike

  • Satellite Pro U200 shuts down after 5 mins then starts after a while

    Satellite Pro U200 shuts down after 5 mins then starts after a while. When it shuts down the
    blue screen says - stop: (0x0000008e,0xaa846f58,0xa9f29808,0x00000000)
    sysaudio.sys - adress aa846f58 base at aa843000, datestamp 41107f1a

    Hi
    Believe me; its not easy to say exactly why the BSOD appears.
    Generally it happens because of the serious software malfunction or hardware fault.
    Did you use the OS from the Toshiba image?
    There message says something about sysaudio.sys.
    This file is a system audio WDM filter process and its a part of Windows OS. It controls the hardware like printer or graphic card on a lower level.
    Note: The virus uses such files as a camouflage. You should use always a anti virus application.
    Furthermore you have suggested that the notebook shuts down after 5 min.
    Well, this sounds like a overheating issue. How did you use the notebook? You should know that the free space around the notebook is very important because of the air circulation. The ventilators should be also free.
    I you use the notebook in the right position and this will happen again so I would recommend asking the Toshiba service partner for the help. They should check the notebook.

  • Essbase Server Shutting down suddenly

    HI,
    Our Essbase Server shutting down suddenly once or twice in a month. Previously we have the same problem, Hyperion recommended for Server upgrade from 9.2 to 9.3 version. But the problem still exits. What could be the reason? If you have any idea why the essbase server shutting down suddenly? What are all the possible reasons and what needs to be done to solve this problem.
    Essbase Version 9.3.1
    Oracle DB to load data.

    Previously we submitted the same issue to Hyperion team.. they suggested for server upgrade... after upgradation also same problem occuring.....
    Nothing is happening when server is down.. we r unable to do anything like data load, calc scriprts running.....
    Server is in volatile state like.. up for 2 min and down and starting up.... because of this application access is too slow... users are feeling like server is completely down......
    If we r trying to access through excel... it is hanging... after 10 min application info coming.... we checked the server statistics.... they r changing after long time.... ( we r checking the server status through top command in UNIX... here status is not changing as frequency as when the server is working fine)....

  • Why is my mac shuts down suddenly

    My mac shuts down suddenly, i have to press any botton in oder to turn on, and if I stop messing with the mac it will shutdown. Any advice??

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

Maybe you are looking for

  • Reading XML Data from ABAP Program?

    Hi, How do I read XML Data from an ABAP Program? For example if I have the below basic XML Code- <xml> <Name> Thiru </Name> <Age> 24 </Age> <City> chennai </Chennai> </xml> How do i read the data within the Name,Age, and City tags into variables in t

  • Why can't I get video call anymore?

    It's not highlighted anymore when I turn Skype on  Our Video Call has suddenly dropped out .Anyone know why and how I can get it back .

  • Attempting to copy to disk failed. An unknown error occurred (-69).

    I get this error every time I try to sync my ipod touch. I have restored the ipod and have attempted to download songs but after 2.3G it gives me this error. Any ideas?

  • 11g onthe top of 10g? in same system.

    Hi Gurus, I planing to install obiee 11g on the top of 10g in my laptop(*OS*:windows xp 32 bit,*DB*:oracle 11g ,with 4 GB virtual memory in VM ware,disk space 80 GB,java 1.5) 1)what are extra configuration we need to take care? 2)Is there any clash b

  • Oracle cursor question

    Hello, When using cursors, is it the same thing if i issue: cursor c is ..... r c%rowtype; begin for r in c loop .... end loop;or loop open c; fetch c into r; exit when c%NOTFOUND; -- do some actions.... end loop;? Or is it any difference? Thanks Edi