Satellite P200-1BY after recovery I have drive E: instead of D:

Hello,
I've restored my P200-1BY because of wifi problems and it seems that now my partition Data is named E:
I think it was named D: which would be logical, but I'm not sure. Is it normal ?
Thanks.

Hello
The whole situation depends on how many HDD partitions you have. Sorry but you didnt explan the exact situation in Windows explorer and nobody of us know what you mean with partition E.
Anyway there is no reason for panic. In Disc Management you can do with your partitions what you want. Make it optimal for usage.
Bye and good luck!

Similar Messages

Satellite X200-1AA - After recovery I have the previous BIOS version?

I recently updated the BIOS of my Toshiba Satellite X200 1AA with Windows Vista SP!. After a few days, I made a product recovery using the recovery CD. When the recovery is made, does the BIOS return to the previous version?

Hi!
No, the BIOS dont return to the previous version. The Toshiba recovery disk contains the factory settings of the software on your notebook and not the BIOS. The BIOS has nothing to do with the software on your notebook.
So dont worry, the recovery disk doesnt touch the BIOS and you have still the new version.
Bye

Satellite P200-1BY - Wi-Fi turns off after reboot

Hello,
On Satellite P200-1BY, on reboot, the wi-fi turns off on reboot. The switch then is useless.
I don't know where does this come from, and another reboot set the thing right.

Can you enable it again with FN+F8?

Satellite P200 freezes after 5-10 min and need multiple reboot to work fine

Sorry in advance for my poor level in english because im french ...
My p200-1de has a strange problem :
Every day when i start a new session, it work fine (booting until the desktop) and i start to work.
After 5-10 min, windows vista (ultimate) freeze and i need to stop/reboot many time to finally success and boot until the desktop.
Sometime i need to boot in safe mode without network and wait on desktop for 5 min
It seems like some part or piece of the notebook need to be hot to work fine (something twisted maybe)
I cleaned with dry air the fans windows without improvements. I bought new memories from toshiba in france and the problem is still there. The hard disks are ok (scanned and tested)
The warranty is ended last january so ...
Does someone have any idea?
thanks

Hi!
Have you cleaned the notebook with compressed air spray? This could blow out the dust from the cooling ventilators and therefore you must not disassemble the notebook.
Im not sure but it could be also a software issue. Have you reinstalled the notebook with the Toshiba recovery disk?
This disk contains the factory settings with all drivers and tools. So you can determine if its a hardware or software issue.
Bye

Unknown Device After Recovery - NEED DEVICE DRIVER

Pavilion dv6
Windows 7 Premimum Home
My HD died and I installed a new one, did all the recovery. There is one Unknown Device -- can't find out what it is.
USB\VID_138&PID_0018&REV_0078
Can someone give me a link to this device driver please

Hi,
Please try this:
http://ftp.hp.com/pub/softpaq/sp54001-54500/sp54362.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Satellite P200-1EE - is the Data (E:) drive physically seperate from C:?

Want to format and re-install everything on the laptop as it's playing up during operation. However need to confirm if the drives are actually seperate and not virtual, so I know to backup on an external drive instead of losing everything!
Thanks for your advice people!

I agree with Barrie. When you use the Toshiba recovery disk, the HDD will be formatted and you will lose your data.
If you use a Microsoft Disk, you can choose on which partition the OS (operating system) should be installed. So must not backup your data.
By the way, I save my data additional on an external HDD.

Satellite P200-RT1 - FN keys don't work after downgrade to XP

Hi
I have a Satellite P200-RT1, PSPBOC.
I have downgraded my operating system from Vista to XP.
Now I am having a driver issue, I have installed all of the drivers for my computer. I have installed all of the HotKey utilities for my computer as well and I still have an issue. Some of my FN Key functions don't work. The ESC to F5 Functions work but all of the functions above there do not.
I am really looking for the Display Brightness and Dimmer keys F6&F7 to work, if possible I would also like the F9 key touch pad enable/disable key to work as well, which as of right now they don't.
I was wondering if there is a driver that I am missing and if so which driver is it. I have taken my computer into three computer shops now and no one can figure this out. Please Help ME!
Thanks Ken.

Hello
It seems that your notebook is a Canadian model and therefore you can download the drivers on the Toshiba Canada website:
http://www.toshiba.ca
The problem is that I cant find Windows XP drivers on this website. :(
The only way I know is that you try the drivers and utilities from the European website. Normally the models are very similar and maybe it works. Its worth a try.
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Try to download and install Toshiba Accessibility and Controls (Driver).
Greets

How to obtain drivers for Satellite P200 PSPB6A

Satellite P200 PSPB6A-OCSO4M.
I have not updated drivers since I purchased the laptop seveal years.
Didn't know I had to - pardon ignorance.
How do I go about it please?

Hi
Its not necessary to update any drivers (except of Windows security patches) if everything is running properly!!!
Why you want to update the driver? Just because newer version is available???
My notebook is three years old I install only the Windows patches and fixes. I dont touch any drivers because I follow always this; never touch a running system ;)
PS: Your notebook seems to belong to Toshiba Australian series and therefore the drivers should be available on Toshiba Australian page.
Greets

Satellite P200-1B6: Sound Driver update fails and HD-DVD Player doesn't work

I have just bought a Satellite P200-1B6 laptop and spent the day installing the updates recommended by the TEMPO program. One of these was a Sound Driver update from RealTek but on running this it fails about 80% of the way through with an error: 'Install Realtek HD Audio Driver Failure !!'.
Now the Toshiba HD DVD player fails to start with an error 'Unable to output the video to an external device.
Please switch your display device by pressing the Fn + F5 keys after ending the application'. I've tried this but it seems to have no effect.
I'm now regretting starting to update the installed drivers. Should I try to rebuild the machine using the recovery discs or is there another solution that someone has found? Or have others found the upgrade works?
Any advice welcome

Last month I upgraded my PC Satellite P200 (BIOS, Driver ATI HD2600, Package VAP and HD-DVD Player).
But after this update, I was no longer be able to read my HD-DVDs
Error message was: "Unable to send the video to an external device. Please turn off the display device."
The problem was much of the update Realtek R1.76 (Realtek Sound Driver - 6.0.1.547 - 20/11/07) currently proposed on the site toshiba.
Indeed, the P200-1DE is equipped with Realtek ALC268 Audio Codec.
The latest update of this codec is R1.89. I downloaded from the site Realtek and it has allowed me to solve the problem.
[http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level= 4&Conn=3&DownTypeID=3&GetDown=false]
I have no problem since that last update

Satellite P200 - Product Recovery Disk 2/2 doesn't work

Hello,
because my laptop (Satellite P200 - I bought it in dec. 2007) didn't work properly anymore - and when after a lot of cleaning up it still didn't work properly - I decided to start from the beginning and restore the operating system with the 2 product recovery cd's/dvd's.
Product Recovery Disk 1/2 worked fine - Windows Vista Home Premium is loaded again on my computer.
But what abot *Product Recovery Disck2/2*??
At one point the recovery program asks for an 'ADD-ON' but when I put in Product Recovery Disk 2/2 at that moment the program doesn't recognize the disk. During the rest of the recovery program the program doesn't ask for Product Recovery Disk 2/2, so the content of that cd-rom/dvd now isn't loaded on my laptop.
Has anyone had this problem too?
What did you do about it?
Is it a problem not to have loaded the content of Product Recovery Disk 2/2 (can I go without it?)?
Thanks in advance for any reactions!
Craftsmen
Message was edited by: Craftsmen

Hi
> Product Recovery Disk 1/2 worked fine - Windows Vista Home Premium is loaded again on my computer.
I dont know what Add-ons the tool asked for but as far as I know the Toshiba image contains the Vista OS, Toshiba drivers and the additional software.
So if you have recovered the notebook using the Toshiba Recovery disk 1 then the notebook should be set to the SAME state like at the first day of purchase.
PS: what files can you find on the second disk?

Advice on what driver required for a Satellite P200-1JV

Hi,
I have a Satellite P200-1jv (PSPB6E) and I am missing a driver after a format for a Mass storage controller.
Can anybody advise which driver i need to install?
thx vinnygreg

XP or Vista?
Did you install a street copy of Windows?

After some upgrades on my Satellite P200 cannot use HD-DVD Player

Since I upgraded my PC Satellite P200 (BIOS, Driver ATI HD2600, Package VAP and HD-DVD Player), I can no longer read my HD-DVDs
Error message is: "Unable to send the video to an external device. Please turn off the display device."
I had no problem before the upgrades.
I have no problem with my DVD player on medias.
What happens?
My drive is a HDDVD SD-L802B.

I installed on my PC (P200-1DE / PSPB6E / OS Vista) proposed TEMPO software.
This software referred me to the site Toshiba and proposed several updates to:
- The BIOS (2008)
- HD2600 Drivers ATI card (2008)
- HD DVD Player
- VAP Package
At this time, I try to find the references on the site, but I am surprised ; they are no longer in the "Downloads & Drivers BIOS site TOSHIBA
I downloaded the drivers on my PC.
I can give you the exact references tonight (I write on another PC).
Were there any problems in the proposed updates on the period of November 2007 to the end of February 2008 ...
Besides, the problem of reading the HD DVD, I have not noticed any major problems except perhaps:
- I start a bit slower (It seems to me that this is the connection to the Internet via WiFi, which slowed the start)
- an error when burning a CD
- a problem of installing software as the DVD no longer wanted to stop rotating; I had to stop and to do again PC installation
Do I go back? ...
I made a Ghost of my machine before these updates, but if it is a problem of BIOS, I think I will not be able to do

How to recover only the C drive on a Satellite P200-1FJ

Hi, I have a Satellite P200-1FJ and I want to recover Vista but only on my first partition.
My HDD is divided in 3 partitions and I don't want to loose data. How can I recover only the C partition using the Product Recovery CD that came with my laptop ?

Hi,
There's a specific order in which the downloads will need to be installed. When the flash cards are installed they interact with the Toshiba Product Information tool that is present on the machine; should this not be installed then it will return an error as it thinks the machine is not a Toshiba.
The downloads you need to install (in order) are:
TOSHIBA Value Added Package
TOSHIBA Flash Cards Support Utility
TOSHIBA Hardware Setup Utility
TOSHIBA Supervisor Password
TOSHIBA SD Memory Utilities
TOSHIBA ConfigFree
TOSHIBA Assist
What I would recommend is removing whatever Toshiba software you have installed first and then try it in that order and see what happens :)
Let me know how you get on,
Regards,
Nukey

Satellite P200 - Microphone has stopped working after Windows 7 install

My Satellite P200 came with Vista Ultimate, the mic worked for a few months suddenly it stopped. I decided to install Windows 7, but mic still does not work.
Any ideas anyone?
I use this laptop to skpe my folks a lot. I can use an external mic fine, but really want my inbuilt one working again.

Hi buddy,
Sounds like its something wrong with your Windows 7 installation if the microphone doesnt work anymore...
I would recommend updating the webcam driver because the microphone is a part of it. You can find driver updates here:
http://eu.computers.toshiba-europe.com
I dont know what Satellite P200 you have exactly but if you cant find a Windows 7 driver for webcam, choose another model that is fully Windows 7 supported, e. g. Satellite P300.

Satellite P200-1FC: CD/DVD drive will not start - error Code 10

My Satellite P200-1FC was purchased in January 2008 and preloaded with Vista Home Premium. The DVD/CD Drive is listed in device manager as "TSST corp CDDVDW TS-L632H ATA Device".
At first the drive worked perfectly, but has recently refused to start. Device manager now shows it with a yellow exclamation mark and it's status is given as "This device cannot start. (Code 10)".
Clicking check for solutions produces "could not load driver software" but no solution.
Searching similar questions in user forums suggests a use of a Microsoft Help & Support page headed "The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista".
However this involves modifying the registry! As a relative novice I am reluctant to do this unless I can find no easier way.
Must I bite the bullet and and enter this minefield, or is there a better way?

>At first the drive worked perfectly, but has recently refused to start. Device manager now shows it with a yellow exclamation mark and it's status is given as "This device cannot start. (Code 10)".
This error is definitely caused by a wrong registry entry.
I had such error several times ago and I have solved it removing the lower and upper filters from these registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Here are some steps how it worked on my Windows system;
- I removed the CD/DVD drive from the device manager
- Then edited the registry as described above
- Rebooted the notebook
Im sure it will help you too.
Bye

Satellite P200-1BY after recovery I have drive E: instead of D:

Similar Messages

Maybe you are looking for