Satellite P200 1FT: Different processors in Hardware-Manager

In device manager there are two different processors (T7300 2,0 + T7500 2,2) listed. I thought there have to be two of the T7500's with each 2,2 GHZ??!!

This is nothing unusual ;) I have read that this is a Vista issue and can be solved very easily!
You have to access the device manager and have to remove the CPU entry from the device manager list.
Then reboot the notebook.
After new reboot the Vista will reinstall the drivers and will refresh the CPU entry in the device manager
After this short procedure the both CPUs should be recognized correctly.
Best regards

Similar Messages

Satellite P200-1FT: 1680x1050 @ 60Hz not available on external 22" TFT

Hi,
I bought a Toshiba Satellite P200-1FT some months ago (Graphic card: ATI Mobility Radeon HD2600). I wanted to use a 22" Hanns G HG216DP with its native resolution of *1680x1050px @ 60Hz* as a primary external monitor.
I connected my notebook to the TFT over HDMI. Unfortunately I cannot select this display setting in the Catalyst Control Panel. There is only 1680x1050 @ 30Hz available :(
Has anybody got the same problem? How can I fix it?
Thank you very much,
XeroX

Jayjay is right. Sometimes these issues can be caused by a bad cable, but I doubt this in your case.
Maybe you could try a HDMI 1.3 cable. You can get this in nearly every well sorted electronics store.
I remember that there was an option in the Catalyst control panel. Make sure the "Reduce DVI frequency on high-resolution displays" is unchecked. Helps for high resolutions.

How activate bluetooth manager on Satellite P200-1C7

I have installed a bluetooth dongle on my Toshiba Satellite P200- 1C7 so I have downloaded bluetooth manager and bluetooth stack.
Or when I tried to use bluetooth manager it said that it remains 25 days of evaluation.
So I wanted to know how activate bluetooth manager?
If it's not possible, someone can tell me what software can I use (bluesoleil doesn't work).
Thank you very much for your reply.

Hi
The Toshiba Bluetooth stack on the Toshiba website is customized and designed for Toshiba notebooks.
You should use the Bluetooth stack which is customized for your notebook. Then you would not need to activate any BT.
But listen dude; your Satellite P200- 1C7 seems to be NOT equipped with the Toshiba internal BT module!
Therefore you would need to switch to another external solution.

Satellite P200 - Wrong CPU frequency

Hi
Testing my laptop - Satellite P200 (pspb6) - 1FT - after repair with PCwizard 2008 show me CPU frequency 1195,56MHz, but I have Intel Dual Core 2200MHz?
Thanks for help
Daniel

Hi Daniel
Your notebook and the CPU support definitely the right speed!
Take a look into the device manager and you would see the CPU properties too
To be honest I would not trust any 3rd party applications which monitor the hardware properties, especially the CPU
However, fact is that your CPU is ok and there is nothing wrong

Satellite P200-17C: graphics in XP seems to be running a bit sluggish

Hi all
I've just bought a Satellite P200-17c.
I've set up my dual boot with Vista and XP (that was REALLLLY hard) everything seems to be almost OK, but..... The graphics in XP seems to be running a bit sluggish, when you scroll a window in a browser it seems to 'refresh' in blocks - it's not moving right. If I go to device manager under other devices there are two things for which there is no driver install, one says: VGA controller, the other says: unknown device!
It's true that I haven't istalled the ATI drivers yet.... But that's because the only place I can find to get them for XP is from the Toshiba support area, the file is 162MB (not that big) but it is downloading at such a slow pace even though I have a fast connection, I don't even know if it will work?!
I've tried some things from the ATI site directly, althought I was trying to install the drivers for the ATI HD2400 graphics card that the machine has, on installation it said it couldn't continue as there wasn't any compatable hardware connected.....
My download from the Toshiba area has already gone wrong once, meaning I have to re-start it.
Does any one have any light they can shine on this issue. If any one has the driver downloaded already and fancies sticking on mega upload or something, that'll be fun???!!!!!
Ideas suggestion welcome!

Hi
I was very curious about driver offered on Toshiba support page. You are right about file. It is about 160 MB and I have needed 20 minutes for download but download was successfully and I do not see any problem that you can not do the same.
Extract the file and just use setup.exe to start driver installation.

Installing devices under windows XP on Satellite P200-14H

Hi,
I have recently purchased Satellite P200-14H. It came with Vista home and since CAD software we use in our company doesn't work on it, we installed WXP on it. Everything works fine, we got the system almost fully functional, installed 99% of the drivers, but in device manager I still have 2 devices that are not installed:
1. PCI Memory Controller
2. Video Controller (VGA Compatible)
For PCI Memory Controller Ive tried just about everything and I think that ATI catalyst software doesn't recognize mobility radeon 2600 HD because of it (I get an error "no compatible hardware was found on your computer".
Does anyone know how to solve this problem? I need to send this laptop out on the field with a constructor next week, and it can't go like this...
Thank You

First of all the problem with the drives is easy finde out what chipset u have (32 or 64) (ICH8M_32bit or ICH7M_32bit for ex) and go to THIS PAGE download the drivers and u have a folder called F6flpy in wich are the drivers for atat
from here u have 2 options
1 u buy an usb floppy and u put the deriver on a disk and u instal them from here
2 u go to http://www.nliteos.com/download.html download the program which let's u put this drivers on to the windows kit and rewrite the new kit on to a cd disc (this is what i did)
I hope it help if not give me an email.

Re: Satellite P200-137 missing second harddrive connection

My Satellite P200-137 is missing its second harddrive connection. Regarding the manual and the specifications there should be a second connection, but when I opened the second drive bay the only thing I saw was an empty space for the drive and some solder connections, but no sockets to plugin the drive.
Is this normal: does the 137 model only have one functioning harddisk connection? Is it possible to get the second drive-socket attached?

> Regarding the manual and the specifications there should be a second connection
I think you didnt read the manual properly ;)
It says that this option is available on certain models
Fact is that a same notebook series can be equipped with different hardware parts.
So the specifications are always different.
The P200 series seems to support different motherboards and some motherboards are not outfitted with two HDD controllers. So the notebook supports tow HDD bays but the second HDD controller is available.
Yes, this is a little bit confusing but its definitely nothing wrong with your notebook ;)
Regards

Re: Satellite P200 PsPB3C-BB808C Cannot locate *Multimedia Controller*

I have just upgraded my neighbours' Toshiba Laptop to Win 7 after a bad Vista crash.
It is a Satellite P200 -BB808C.
When I started there were two drivers missing, the Mass Storage Controller and a Multimedia Controller. I did a clean install, starting with formatting the drive.
Windows 7 loaded A-OK and all Toshiba drivers were installed following the recommended sequence. I was able to locate the driver for the Mass Storage controller but as yet cannot find anything for the Multimedia Controller.
I have been alternating between the Canadian and USA site with no luck.
I have also spent a lot of time Googling different variations of the same question, trying to locate some info on this driver. It seems a lot of people are having the same problem.
So far the system is performing very well with no glitches or hang-ups.
Any suggestions would be appreciated.
Thank you.

Thank you for the prompt reply.
Yes I have checked that out already.
There are no details given in the device manager for this item. There is a code 28 for this driver and an exclamation mark by the controller name.
It gives the location as PCI Bus 6, device 0, function 0.
The driver, details and resources tabs are all empty, no details whatsoever.
I was wondering, perhaps I should try re-installing all the drivers, etc.
Your thoughts.

Why does Vista shows two different processors on my SP A200?

Hi everyone.
Im new here but have a very important question about my new laptop that I just bought. Ok here goes if anyone can help?
Just bought my new Satellite Pro A200GE-26Q Intel centrino core 2 duo t7500 2.2ghz laptop that came with 2GB of RAM that Ive already upgraded to 4GB of RAM straight away and wow this is such a nice machine tosh build great laptops!!!
The problem Ive got is that when I go into device manager and to the processor link it shows both processors one a T7300 @2.0ghz and one T7500 @2.2ghz... now I know the speed can be slowed down due to power saving etc but surely it should show BOTH processers the SAME ie [email protected] and [email protected] instead of the above T7300 @2.0ghz.
Have I been sold a laptop with wrong/different processors in? perhaps by mistake and one other thing is the RAM shows 3070MB (3GB) and I know some systems use the rest but I thought vista premium home was meant to show it all... I do know upgrading to vista x64 will make better use of it but as Ive read on lots of forums when you run on x64 you get lots of driver problems and the hassle is not worth it. So please help me sort out this processor problem.
Do I have a matched pair? Thanks again.
Newbie Paul

thanks for your reply and i do understand about the ram but i am unable to find anything about the two different processors... pls help or could you send me a link to where this is answered pls..?? or email me it..?? [email protected]
thanks again
paul

Satellite P200-1EE - Hard disk not found if I try to install XP

Hi and I have a problem.
I recently bought a Toshiba Satellite P200-1EE series laptop running (of all things) Vista and nothing but problems ever since so im trying to install XP professional and overwrite Vista.
But whenever I try to install it says "hard disk not found..... unable to access"
I've heard of problems like this before something like a "software block protocol"
Any suggestions?

Hi!
Why you dont search in the forum before you start a new topic?
I mean you will hundreds of threads about this issue here in the forum and you will find the solution of your problem in few minutes.
Well, the reason for this is because you need the SATA drivers before you can install Windows XP. As far as I know your notebook is equipped with an Intel chipset and so you need the Intel Storage Manager. You can integrate the drivers using an external FDD or nLite [www.nliteos.com]. Furthermore this document could be useful for you:
http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm
If you have more questions, please use the forum search!!!
Bye

How to recover only the C drive on a Satellite P200-1FJ

Hi, I have a Satellite P200-1FJ and I want to recover Vista but only on my first partition.
My HDD is divided in 3 partitions and I don't want to loose data. How can I recover only the C partition using the Product Recovery CD that came with my laptop ?

Hi,
There's a specific order in which the downloads will need to be installed. When the flash cards are installed they interact with the Toshiba Product Information tool that is present on the machine; should this not be installed then it will return an error as it thinks the machine is not a Toshiba.
The downloads you need to install (in order) are:
TOSHIBA Value Added Package
TOSHIBA Flash Cards Support Utility
TOSHIBA Hardware Setup Utility
TOSHIBA Supervisor Password
TOSHIBA SD Memory Utilities
TOSHIBA ConfigFree
TOSHIBA Assist
What I would recommend is removing whatever Toshiba software you have installed first and then try it in that order and see what happens :)
Let me know how you get on,
Regards,
Nukey

Can't install a clean Vista 64bit on Satellite P200-1I6

Hello,
i have Toshiba Satellite P200-1I6. I have Product recovery DVD which works, but I want to do a clean install of Vista 64bit OS but
my toshiba won't but any Vista version - only Toshiba product recovery DVD.
Does someone knows how to fix that?

Usually the notebook would boot from the CD/DVD drive after pressing the C button.
You could also press F12 to get the boot menu on the screen. Then you could choose the CD/DVD drive as a boot source.
But if the notebook cannot boot from DVD then its possible that the DVD is not readable for the CD/DVD drive.
Try different DVDs from different manufacturers... I made a good experience with DVD-R TDK

Satellite P200: How do i calibrate monitor to get same colors using Photoshop CS3

How do i calibrate monitor to get print that looks like pic on screen?
I am using Photoshop CS3.
When I get a pic the way I want it on the screen and try to print it, it prints much darker. I could calibrate my iMac monitor for photoshop but can't find a way of doing it with my Satellite P200.
My printer is a Canon ip4300 and I'm using Canon ink and paper.

I think you need additional software and hardware to calibrate yout monitor.
Start Here http://search.lycos.co.uk/searchframe.html?url=http%3A%2F%2Fwww.drycreekphot o.com%2FLearn%2Fmonitor_calibration.htm&query=moni tor+calibration

Satellite P200-1FC: CD/DVD drive will not start - error Code 10

My Satellite P200-1FC was purchased in January 2008 and preloaded with Vista Home Premium. The DVD/CD Drive is listed in device manager as "TSST corp CDDVDW TS-L632H ATA Device".
At first the drive worked perfectly, but has recently refused to start. Device manager now shows it with a yellow exclamation mark and it's status is given as "This device cannot start. (Code 10)".
Clicking check for solutions produces "could not load driver software" but no solution.
Searching similar questions in user forums suggests a use of a Microsoft Help & Support page headed "The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista".
However this involves modifying the registry! As a relative novice I am reluctant to do this unless I can find no easier way.
Must I bite the bullet and and enter this minefield, or is there a better way?

>At first the drive worked perfectly, but has recently refused to start. Device manager now shows it with a yellow exclamation mark and it's status is given as "This device cannot start. (Code 10)".
This error is definitely caused by a wrong registry entry.
I had such error several times ago and I have solved it removing the lower and upper filters from these registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Here are some steps how it worked on my Windows system;
- I removed the CD/DVD drive from the device manager
- Then edited the registry as described above
- Rebooted the notebook
Im sure it will help you too.
Bye

Satellite P200- Power Saver in XP not working

Hello,
I have decided to make another thread so that more questions can be answered. Right so I installed Power Saver Driver and then a reboot and then I install Power Saver but when I try to access it from Control Panel I get a message saying "CANNOT open because you do not have access right to use "TOSHIBA Power Saver". Now when I go to the SYs32 directory and look for Toshiba Power Saver related files I find a file called TPSBattM and when I try to run that I get a "A Fatal error has occurred, Code: 0x2".
I have tried re-installing and removing but it still isnt working. Does anybody have a fix for this since this problem has been bugging me on older laptop ever since and TOSHIBA still haven't sorted it out.
I can't seem to find the Common Modules for the Satellite P200-144. If somebody could find them then it should start working again.
Thanks and please somebody try to help me.
neo-tech

Why you start different threads about one and the same theme?
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=114278#114278
You should follow the first one!

Satellite P200 1FT: Different processors in Hardware-Manager

Similar Messages

Maybe you are looking for