Satellite P200-1K8 - Can't get the display and sound drivers to work

Hi.
I'm getting desperate. I tried everything I could imagine.
First - don't get the catalyst control center to work, I only have the graphic driver installed now (tried both - the one from Toshiba and with Mobility Modder modified ATi driver - none works.
Second - when I install the sound driver the Realtek sound manager is encoutering the problem and must close every time at startup. And yes, I did update the BIOS to ver. 5.20, installed XPSP3, installed chipset driver (newest from Intel homepage or the one from Toshiba, no matter which, always same issue).
Please help. I don't want to spend rest of my life trying to get XP onto my laptop.
Thanks in advance.

So I did check the BIOS version again and it is 5.40 indeed. Then I installed the updates from Microsoft that were downloaded when Iwas away. I think that was mistake. Errors, errors, malicious software (and there were only some codecs and players installed yet). So I reformated and reinstalled the Windows and drivers except audio driver.
According to MS (http://support.microsoft.com/kb/835221/en-us & http://support.microsoft.com/kb/888111/en-us) the patch KB888111 is the updated KB835221 and before installing it, the KB835221 should be uninstalled. So I tried to install the KB888111 only and got Error message: Setup has detected that the Service Pack version of this system is newer than the update you are applying. It seems that I don't need to install these patches since I have XPSP3.
So I installed the sound driver again and in Device manager everything seems to be OK. I only have this annoying message at every startup: Realtek Voice Manager encountered a problem and must close. What is this Voice manager anyway? And any other solution? I didn't install the camera yet. I think it won't work again.
Any new ideas?
Thank you all.

Similar Messages

  • HT4623 how can i get the numbers and keynote app to work on my imac?Help!

    I downloaded the numbers and keynote apps but how do i get them to open and work on my imac or ipad?

    If you downloaded the iPad apps in iTunes on your computer, you have to sync them to the iPad. If you downloaded the Mac apps from the Mac App Store, they should open on the Mac, so I think we have to assume that you downloaded the apps for the iPad.
    The apps that work on the iPad do not work on the Mac, and the Mac apps will not work on the iPad. The Mac and the iPad have different operating systems so you must purchase the apps for both the computer and the iPad.
    If you did buy the iPad apps in iTunes on the Mac - sync them to the device.
    Connect the iPad to the Mac and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Apps Tab on the right.
    Click on all of the apps that you want to sync in the list
    Click on the Sync Apps Heading.
    Click on Apply in the lower right corner of iTunes

  • How can I get the Tektronix 754c instrument drivers to work in LabVIEW 5.0? I am getting a LabVIEW load error code 9.

    I am running Windows 98 on a laptop. AFter downloading the drivers for LAbVIEW 5.x and trying to open the VI tree in LabVIEW 5.0, I obtain the error message for about three of the VIs. One of them is the initialization VI.

    I tried the same driver in Labview 6.1 and Win2K and didn't get any errors. One possible solution might be to use the IVI driver for the TDS754D. The command set should be almost identical, but if the driver queries for the model number it might complain.

  • My iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?

    Hello Friends,
    I've two iPod Nanos (4th gen - 8GB). I'm facing a severe problem with both of them. For both iPods, I tried to do this method Simultaneously press the top button + home (central) button. But of no use.
    1. My first iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?
    2. My second iPod is facing more severe problem. None of the buttons are working. When I connect it my PC it showing "CONNECTED- eject before disconnecting". But it is not ejecting with all the usual methods. When I manually and physically disconnect it from the PC the same "CONNECTED- eject before disconnecting" is still showing till the battery goes off. After that if i press any button it is showing low battery signal. And when i re-connect it to the PC the same process is repeating. When I tied to restore it to the factory settings I'm getting "Error" report.
    (I'm using windows 7)
    Friends, Please help me with the above problems. It will be a great help.
    Thank You.
    R.SAMALA

    Sounds like some hardware issues, meaning you'll want to take or send the iPods in for service or repairs. You can choose to have Apple do an out of warranty exchange for the prices indicated in the link below or find another third party service perhaps even local to your area.
    http://www.apple.com/support/ipod/service/prices/
    B-rock

  • How can I get the date and time and display it on the report main page?

    Gurus,
    How can I get the date and time and display it on the report main page?
    Thanks!

    Hello,
    You can create a Formula Colum returning a date :
    function CF_1Formula return Date is
    begin
    RETURN(SYSDATE);
    end;
    Put a Field in the Layout having this formula column as source .
    Regards

  • I have an ut ipad 2 with no configuration for the i cloud. I have follow the instructions of synch the ipad with itunes v 10.6 in my pc, but i can not get the display of the cloud icon in the general settings of the ipad. appreciate any help

    I have an ut ipad 2 with no configuration for the i cloud. I have follow the instructions of synch the ipad with itunes v 10.6 in my pc, but i can not get the display of the cloud icon in the general settings of the ipad. appreciate any help

    I'm asking because ios5 introduced iCloud. You have to have updated to ios5 to see it.

  • I can not get the flash player plug in to work with Internet Explorer

    I can not get the flash player plug in to work with Internet Explorer

    Zoltan71 wrote:
    I just bought this computer. My Internet Explorer is version 11.0.1
    I have the box checked to Install new version automatically, but it has not done any upgrading.
    I can't get the computer to update anything as far as I can see.
    The flash plug in does work with the Crome browser but it will not work with Internet explorer.
    I looked in the manage add-ons and it says enabled.
    I also went into the safety tab and deselected
    Active X filtering.
    Restarted and still does not work.
    I need help.....
    Chrome uses a different and separate plug-in.
    There are things about IE you need to know, especially 11. Specifically:
    "User-Agent Strings"
    That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
    Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
    The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
    Microsoft has no plans to "fix" the mess they've created because they think it's a great idea to block you out of the websites you visit.
    They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
    I'm not big on "pretending" so I recommend actually using another browser.
    Firefox (from Mozilla)
    Opera (from Opera)
    Safari (from Apple)
    Chrome (from Google)
    ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

  • How can i get the time and result together show in one Array or in Cluster?

    hello everyone i am a new user .I want to get the time and voltge form a Generater. How can i get the time and result together show in one Array or in Cluster?When i selecte the first(or third...) result then in the front panel display the time and the voltge.Thank you!
    I post the time and voltge NOT together photo
    Attachments:
    12345.GIF ‏54 KB

    You can create an array of clusters with one element being the time and the other being the voltage, like so (using the "Get Waveform Components" function):
    Message Edited by smercurio_fc on 10-17-2007 03:15 PM
    Attachments:
    pic.PNG ‏11 KB

  • I recently bought a new macbook pro and set it up using the migration assistant and my mac mini.  I can't get the text message forwarding feature to work with both computers.

    I recently bought a new macbook pro and set it up using the migration assistant from my mac mini.  I can't get the text message forwarding feature to work with both computers.  It keeps saying that I only have 2 devices setup, my iPad and my macbook pro.  When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device.  I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer.  Any ideas?

    Thanks, Sig.
    The old computer is a 2.6 Ghz Intel Core 2 Duo
    The new one is a 2.3 GHz intel core i7
    In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem.  Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page.  Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
    If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them. 
    (I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

  • How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?

    How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?  I would like them to open at the size they were previously resized like they used to in previous operating systems.  They currently open at a very small size and the first colum is only a few letters wide necessitating a resize practically every time one wants to use it.  Any help would be appreciated.

    hi Prasanth,
    select werks matnr from ZVSCHDRUN into table it_plant.
    sort it_plant by matnr werks.
    select
            vbeln
            posnr
            matnr
            werks
            erdat
            kbmeng
            vrkme
            from vbap
            into table it_vbap
            for all entries in it_plant
            where matnr = it_plant-matnr and
                  werks = it_plant-werks.
    and again i have to write one more select query for vbup.
    am i right?

  • I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

    I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

    I am talking about the Ver 3 download link that came with the purchase email.
    That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
    Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
    If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
    /Applications/Aperture.app
    /Library/Application Support/Aperture/
    ~/Library/Application Support/Aperture/
    Leonie

  • How can i get the itunes and apps store icon on my ipad desktop?

    How can i get the itunes and apps store icon on my ipad desktop?

    Google are supposed to be working on an iPad maps app.

  • I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

    I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

    Hello, since nobdy else has replied...
    Long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

  • I plugged my Iphone into the computer to put my pics on the computer.  It went strait to itunes an erased all my contacts and pictures and replaced them with my husbands contacts and photos.  Can i get the contacts and photos back?

    I plugged my Iphone into the computer to put my pics on the computer.  It went strait to itunes an erased all my contacts and pictures and replaced them with my husbands contacts and photos.  Can i get the contacts and photos back?

    Have you synced your iPhone with iTunes on this computer before? If not, nothing is selected automatically under the various tabs for your iPhone sync preferences with iTunes.
    Was this the first time your iPhone was connected to iTunes on any computer? If so, the first time an iPhone is connected to iTunes for the first time that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or eyeless device to the iPhone or set up the iPhone as a new iPhone. This is not automatic, it must be manually selected.

  • HT5701 Downloaded Safari 6.0.4 and my software is not up to date to run it. I can not get the old version of Safari to work again.

    Downloaded Safari 6.0.4 and my software is not up to date to run it. I can not get the old version of Safari to work again.

    Open  > About this Mac, and tell us what OS X version you have. If it's 10.8, reinstall OS X 10.8.3 > http://support.apple.com/kb/DL1640
    If, after reinstalling the update, you still can't use Safari, hold Command and R keys while your computer is starting and reinstall Lion or Mountain Lion

Maybe you are looking for