Satellite P200 and new BIOS Update 1.70

Hi,
Toshiba have just released BIOS Update 1.70 for their P200 models. One notice I have seen is that the Logo has changed from In touch ith Tommorow to Toshiba Leading Innvoation and the Intel logo is now black.
Havent noticed any new settings.

Thx for the report of the change. Would be interesting why the change their graphics...weirdo.... :D
Wish you a nice weekend
till the next update ;)

Similar Messages

W520 and new bios update

I saw lenovo released the new bios update for the W520 and it says they updated the cpu microcode. Does that mean it will accept Ivy Bridge CPU's?
Also what is your thought on W500 laptops in today's world? Are they worth hanging onto for anything or basically obsolete. I have 7 of them with the 1920x1200 resolution screen and 4 gb ram, would they be able to run the newer versions of autocad and catia?

no the W520 doesn't accept Ivy Bridge CPU.
The W500 run AutoCAD and Catia, but would be very slow if you have many parts. So if you are using the W500 for work, then you should consider upgrading.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Satellite A500-149: Would new BIOS update 2.00-win solve illumination issue

Hi
I need help because i have one toshiba A500-149 but the ilumination of keyboard dont work (FN+Z).
I see a new Bios update and my question is:
This new update 2.00 win solve that problem?
this upgrate is secure?

In my opinion the BIOS 2.0 update does not solve your problem.
A friend of mine is an A500 owner and the backlight keyboard functions using old BIOS.
I think there must be another reason for your backlight problem.
Did you see this knowledge base article?
http://aps2.toshiba-tro.de/kb0/HTD2603CL0000R01.htm
in some cases you need to press FN + Y due to different keyboard layout.
The FN buttons are controlled by value added package as reported by users above...
Reinstallation of VAP should help you be sure you use the latest VAP recommend using one released for newer series like A660/A665
But if the VAP does not help, and if backlight is enabled in BIOS, then there must be a hardware issue maybe the 2nd keyboard cable is not connected properly to the backlight connector loose connection might cause this

Northbridge temps and the new bios update

I know the Northbridge temperature issue has been posted before. But I’m posting in relations to the new bios update supposed to be released 08/24. Will these temp issues be resolved in this new bios update?
There could be many reasons why the Northbridge temps are so high, ranging from bad heatsink design to Northbridge fan blowing too fast. Mine runs 55C idle which is way too high…but when I go to touch the heatsink, it’s barely warm. A lot of people have been complaining about the “light show” on the Northbridge, but heck I like it. I think it’s pretty cool
One last thing I’d like to bring up, this new bios update, I don’t know whether or not 1.6 supports DDR500mhz Ram (because I don’t have it yet) but will it support it? Reason being is I plan on buying DDR500mhz Ram and do some more overclocking.
1:1 Cpu to Ram ratio here I COME!!! :D

ROFLMAO (first sign of insanity when you laugh about a such sad matter)
Maesus, its nothing personal, but do you really believe there will be a v1.8 BIOS? To me it looks like MSI has abandoned the 875P. BIOS v1.7 is supposed to come when? ...August 28th? That's 2 months since the last one and as far as I have heard there has not much changed over v1.6. When is v1.8 supposed to come? Another 2 months later? Not to speak of v1.9... That makes about 5 months to get the board working the way it was supposed to do from the first day (if v1.7 solves something at all).
Sorry, but MSI is about to lose all trustworthiness with this so called support. And moderators in a company's forum who are not even employees of that company, and have to take guesses (see Prescott support) about the products, do not help to make the situation much better (again, nothing personal). If the support team would take a look by themselves on a regularly basis (1-2 times a week) perhaps then the problems would be solved much faster. If I would work like this and not care about the customers I would have lost my job long ago.
There are still many problems. The board is on the market for some months now and memory compatibility and timings are still an issue.
I've visited many forums the last week. And I do hear (read) almost the same everywhere: Poeple who bought the 875P board say its high quality and has good features, if it only would work as supposed. MSI miserably fails to give it a working BIOS. Results in polls about "MSI 875P board good or bad" tend to be weighed horribly to "bad". Most of the ppl will never again buy a MSI board because they feel left alone with their problems.
It is clear that ppl who are satisfied do not post that in forums. But when something is wrong, they do, because they want the problems solved. But what are support forums good for when no one is listening to the complaints?
In times who prices are almost the same for the products, ppl tend to buy that product, that not only has the best features but also good support. When it comes to that MSI is not first choice.

New bios update (f.29) causes my computer to overheat and shut down

New bios update (f.29) causes my computer to overheat and shut down. What should I do?
This question was solved.
View Solution.

Reflash to the previous version.On your drivers page, beside the BIOS update there should be a link to 'Previous versions'.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How to disable Toshiba TEMPRO alerts about new BIOS update

Hi just installed TEMPRO on my W8 Satellite L875 laptop, ant it's saying there's a new bios update available - (1.60-WIN) which is the same version as I've already got.?:|
Q: how can I make this alert go-away ?
-Tom

Thanks, but that's not quite what I had in mind ...
I would have expected tempro to examine my system & installed components, and to alert me when a new/updated driver is released. I would then install the new/updated driver, and then tempro should dismiss the alert - or perhaps I'm just not understanding how tempro works ?

New BIOS update may have cause BlueScreen

I got a notice on my laptop about a BIOS update and another update. After finishing the installations, i was attempting to play Halo, but when i joined a game server, my laptop BlueScreened.
It has never crashed before, and im afraid the bluescreen has something to do with the BIOS update, since thats the only significant change ive made to the computer recently.
Please help! This is a fairly new laptop!

Well so far its ok. Maybe it was just one of those 1 time errors but i dont know. I dont know the model exactly but i know its a Satellite, and the BIOS update was 1.30 of im not mistaken, but im not sure. Its not having problems now so im not going to worry about it.

Tecra A9 - What are the changes in the new Bios update

Can someone tell me the changes in the actualy BIOS Update v1.70 and the old ones?
And is there a PDF outside where i can see the detailed description about the Bios functions?
Thanks
Greetings

So, until now my question has no answer!
In the US Forum is the Service from Toshiba is much more better ->
[BIOS details|http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlViewDL.jsp?soid=1978903&moid=1702318&rpn= PTS53U&BV_SessionID=@@@@2130665852.1205800119@@@@& BV_EngineID=cccjadedikgfkdgcgfkceghdgngdgmn.0&ct=D L&all_docs=false]
I also must send my Tecra A9 to the support to change my DVD-Burner (Teac) and it taks 3 Weeks.
I am not very happy with this support at all!
Now Toshiba has released a new Bios Update v2.10 and i didn't now what are the changes.
Greetings

Qosmio X500 - NEW BIOS update - 1.90

Found a new BIOS update 1.9 on the Australian Toshiba Website. This morning it was showing version 1.40, but now it says version 1.90. I will try it on my X500 when I get home tonight, see if it fixes the Sleep-wake up issue.
http://www.mytoshiba.com.au/support/notebooks/qosmio/x500/pqx33a-00x00j/download?os=25
Aaron

Hey danied...thanks for sharing this....yes I have a Qosmio x500-110 (win7 64 bit) and its been giving the Bluetooth disconnection/ finger print sensor/and webcam not initialised problem since the start.
Dont know what is causing this problem. I have tired installing all the drivers with no use. All the three get disconnected together. Also there was sum problem with my Bluetooth stack so I downloaded the latest on e from Toshiba website and the software works fine now but once it gets disconnected with the webcam u need to restart.
This problem is still there...

Requires new BIOS update

Hi, I bought a new network card Intel® Dual Band Wireless-AC 7260 and I tried to install it into my HP DV6-6171TX however the BIOS state that it is not supported. I tried to look for BIOS update but the latest update they have online is in year 2011 version F.1B. Can I get new BIOS update to that I can get the network card to work?

Symphofear wrote:
Ok throught the manual which I went through, I bought an Intel Centrino Advanced-N 6230 which was also stated inside the manual however after I had changed to it and tried to bootup my laptop, the bios still have the same error. I am using the Intel processor, not the Amd one.
You have to use a wireless card under the exact part number (BIOS will reject any other and you get the error). The part number for Intel 6230 belongs to a different Intel wireless card (unfortunate error from HP). I think it's Intel 1030. Dv6-6000 series is the last series with the whitelist still in it. There is an Intel 6230 listed under a part number: 636672-001. Perhaps it will work.
edit: I have found Intel 6205 listed under 631954-001 but it's a pure wireless card, not a combo with bluetooth.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Games Flickering with new bios update 351

Games Flickering with new bios update TV277MH.351 basically when i flash my card with that bios i got in game flickering of 3D objects this is SErial number
S/N:602-V277-250B1407011905 thank you in advance

Quote from: misel.verk1 on 15-April-15, 19:02:26
The one provided from above in the post by Flobelix
The OC mode .

New BIOS Update for the Z61m Series

Hi,
I have a problem with the downloading of the new BIOS Update for above mentioned notebook. Lenovo provides the version 2.25, but only via BIOS utility (exe-File), although a link to bootable CD exists. Can anyone confirm this or can help me?
Do anyone know a possibilty to contact lenovo/ibm in an easy way (not by contact form)?
Thanks in advance,
AfterBurner

I have the same problem! Will try wit System Update!

Satellite Pro P200-15W: After Bios Update 1.90 fan incredibly noisy

Hi, I have a Toshiba Satellite Pro P200-15W, I've recently done a BIOS update to version 1.9 and seems to have been a big mistake :-/.
After restarting the computer I had a lot of software deconfig and now the fan has become incredibly noisy.
I have the problem with the Toshiba Vista registration software, I get this message: "Vista registration has stopped working". I've read other threads, I don't want to just disable it from the start.ini file, I'd like to actually solve the problem if there's a way.
Is there a way to change the fans configuration? I've read a Toshiba post about another notebook model that had the same problem of noisy fans after a BIOS update, they gave to that a solution with a new version of BIOS, is there a way to reverse the BIOS to the previous version? (will the restore CD be helpful for that purpose?)
Cheers
Edgard

Hi
It seems the fan table was changed and renewed in the new BIOS version and therefore the fans run ofttimes.
Why the fan table was changed?
Well, usually something like this is necessary to improve decrease the internal temperature while the CPU and GPU are running with full performance.
This helps to prevent the hardware from damage!!
Usually the Recovery CD formats the whole HDD (partitions too) and installs only the Toshiba image on the notebooks HDD.
The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
But you can try to recover the notebook to see if the software issues like "Vista registration" can be solved!
If you want to reverse the BIOS you have to contact the ASP in your country!!!
Sorry but this everything what I can suggest!
Best regards

Satellite P200-1B6: Sound Driver update fails and HD-DVD Player doesn't work

I have just bought a Satellite P200-1B6 laptop and spent the day installing the updates recommended by the TEMPO program. One of these was a Sound Driver update from RealTek but on running this it fails about 80% of the way through with an error: 'Install Realtek HD Audio Driver Failure !!'.
Now the Toshiba HD DVD player fails to start with an error 'Unable to output the video to an external device.
Please switch your display device by pressing the Fn + F5 keys after ending the application'. I've tried this but it seems to have no effect.
I'm now regretting starting to update the installed drivers. Should I try to rebuild the machine using the recovery discs or is there another solution that someone has found? Or have others found the upgrade works?
Any advice welcome

Last month I upgraded my PC Satellite P200 (BIOS, Driver ATI HD2600, Package VAP and HD-DVD Player).
But after this update, I was no longer be able to read my HD-DVDs
Error message was: "Unable to send the video to an external device. Please turn off the display device."
The problem was much of the update Realtek R1.76 (Realtek Sound Driver - 6.0.1.547 - 20/11/07) currently proposed on the site toshiba.
Indeed, the P200-1DE is equipped with Realtek ALC268 Audio Codec.
The latest update of this codec is R1.89. I downloaded from the site Realtek and it has allowed me to solve the problem.
[http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level= 4&Conn=3&DownTypeID=3&GetDown=false]
I have no problem since that last update

Satellite L100 - How to download and install BIOS update?

I bought this Satellite L100 in 2006, and it dawned on me that by now I might need a BIOS update (the laptop sometimes freezes at Startup).
I found an update on the Satellite website dating July 6th 2007 but the download instructions are confusing and the driver(s) simply don't come through. Can someone help me with another link for this download?

>how do I 'uncheck' HDD, In msconfig?
What do you mean by uncheck? Do you want to disconnect the HDD or to remove it from the notebook?
In msconfig you can disable (uncheck) the processes which are running in the OS background! You cannot disable HDD in msconfig.
>. I also experience breaks in the sounds of Window message tunes and short freezing moments in all webvideo's I run. Could this have something to do with a bad connection with the HDD
I doubt the HDD connection could cause this Maybe the HDD itself
It would be interesting to know if the same would happen using a new HDD and fresh installed OS. I had a Win XP installed on my notebook. It was a long time since new installation the notebook and OS were soo slowly because many registry keys were corrupted.
I installed the OS again, cleaned the OS using CCLeaner, disabled not necessary background processes and the notebook ran much faster

Satellite P200 and new BIOS Update 1.70

Similar Messages

Maybe you are looking for