Satellite P200- Power Saver in XP not working

Hello,
I have decided to make another thread so that more questions can be answered. Right so I installed Power Saver Driver and then a reboot and then I install Power Saver but when I try to access it from Control Panel I get a message saying "CANNOT open because you do not have access right to use "TOSHIBA Power Saver". Now when I go to the SYs32 directory and look for Toshiba Power Saver related files I find a file called TPSBattM and when I try to run that I get a "A Fatal error has occurred, Code: 0x2".
I have tried re-installing and removing but it still isnt working. Does anybody have a fix for this since this problem has been bugging me on older laptop ever since and TOSHIBA still haven't sorted it out.
I can't seem to find the Common Modules for the Satellite P200-144. If somebody could find them then it should start working again.
Thanks and please somebody try to help me.
neo-tech

Why you start different threads about one and the same theme?
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=114278#114278
You should follow the first one!

Similar Messages

  • Satellite P200-16X - Cooling system is not working

    Hello
    Since a few days I got an issue with my P200-16X. The cooling system doesn't work anymore and thus tmy laptop is overheating... until it shut down immediatly. Then I have to wait some time before being able to use it (the fridge is really good to cool it, but only when the need for the use is extrem). If I use it at the lowest consumption settings, I don't get overheating but still the CPU is at 65°C all the time.
    I know the classic answer to this kind of problem is dust, but this is not the case here. I've always paid attention to that and I've checked: there's not much dust on the fans or on the grid. I've gone in the BIOS but found no option to control the fans.
    Do someone has any idea about that? What I find strange is that I've found someone on a forum having the same problem as me, and at the same time (a few days ago). Could it be some update for Vista which can be the cause of this (these are the only update I made since december and at the time, everything was working well as I was playing 3D computer games without any problem)?
    Thank you.
    Enguerran

    The P200-16X is listed but the guy says he is not completely sure.
    My warranty is over now so that's why I want to do it myself. I've already disassembled a laptop and ironed on the motherboard with success this summer so before paying someone to do this, I would like to open it and see if I can do it myself. I'm just considering all the options and as I need my computer for my job, giving it for maintenance two or more weeks will be difficult. But first I want to be sure that it's a hardware problem and not a software one.

  • Save button is not working for ONE CLICK ACTION

    Hi All,
    We have embeded a custom table view in a standard component.While we are editing the first row of the table view by ONE CLICK ACTION & pressing the SAVE button of overview page,then the record is saved in the database. But if we edit any row other than the 1st one,the save button is not working.
    We have used transaction context here for simple object.
    lv_tx_ctxt = lr_ent_bt->get_transaction( ).
    my_tx_context->add_tx_context( lv_tx_ctxt ).
    Please suggest how we can focus on the current line which we are editing & can save the record in database?
    Thanks.

    Hi Hakan,
    Probabaly this is not my problem. I know that how bt one click we can get the desired row.
    Let me briefly explain you my requirement and currently where I am stuck.
    I have a assignment block ( custom) in the main overview page with a custom table view ( ie in the view we are displayng entries in the table view ) and the user can press edit button on any row and that will open the particular row in edit mode . User will change the value in any of the columns and press save button on the main component and the custom changes will be saved in the database.
    Now the problem that we are facing is when we are chnaging the first row it si working but when we are doing chnages in the 2nd row or 3rd row changes are not saved ( not even in the table view that is getting displayed) .
    *Let me briefly tell you the approach that we took  . Since our table view uses a simple object  ( which is not a related object with BTORDER so we need to explicitly save the simple object entities to transaction context and for doing that we have redefined the eh_onsave method in the overview page) .
    *Now the save button is in overview page so to pass the entry from our custom table view to overview we are using custom controller . The custom controller 's collection wrapper only has the first entry of the table view custom_controller->collection_wrapper->get_next is failing which is the reason why the 2nd entry is not getting saved.
    Can you tell me how i can get all the table entries in my custom controller's collection wrapper?
    Let me know if you have any other questions.

  • Save for web not working in Photoshop element 6

    Save for web not working in Photoshop element 6. I am using Mac os x version 10.5.8   Anyone know how to fix that please tell me. Thanks

    I just copy the preferences from my computer for you to see what are shown about adobe
    file:///Users/raymondsmith/Library/Preferences/Adobe/
    file:///Users/raymondsmith/Library/Preferences/Adobe%20Illustrator%20CS2%20Settings/
    file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20CS2%20Paths
    file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20CS2%20Settings/
    file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20Elements%206%20Paths
    file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20Elements%206%20Settings /
    file:///Users/raymondsmith/Library/Preferences/AdobeUM/
    file:///Users/raymondsmith/Library/Preferences/AppleWorks/
    file:///Users/raymondsmith/Library/Preferences/ByHost/
    file:///Users/raymondsmith/Library/Preferences/CD%20Info.cidb
    file:///Users/raymondsmith/Library/Preferences/CDDB%20Preferences
    file:///Users/raymondsmith/Library/Preferences/cfx%23FBSxPfw
    file:///Users/raymondsmith/Library/Preferences/com.adobe.acrobat.90.sh.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.Acrobat.Pro7.0.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.acrobat.sh.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.Acrobat.Uninstaller.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.Adobe%20Help%20Viewer.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.ami.installer.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.bridge2.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.mediabrowser.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.PhotoshopElements.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.Reader_ppc_9.0.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.Reader.plist
    file:///Users/raymondsmith/Library/Preferences/com.aol.aim.plist

  • My power/sleep/wake button not working.. please help

    Hi guys, my power/sleep/wake button not working what should i do. I went to apple store and they said i will be charge £100 as im no longer on warranty. is there another way, or app that i can use as substitute for that button?
    Your advise and help will be very much appreciated.
    Thank you so much
    G

    Hi Choustonator..
    Thank you for your your help.
    I have tried it but I dont have the assistive touch option.

  • Save functionality is not working in adobe reader

    hello,
    i am designing layout for offline adobe forms in Adobe Live Cycle Designer ES version 8.1 and having adobe reader version 8.
    i save form on PC. When i open  it shows me save button after doing changes in form m not able to save it as save functionality is not working.....Kindly suggest me any solution..
    Edited by: Gopal Khandelwal on Nov 22, 2011 12:21 PM

    Moved to LiveCycle Designer

  • What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Save changes button not working in my tabular form

    Hello,
    I have created a tabular form with all the button like cancel,delete,save,add row and their processes by default
    when i tried to run the report, the save is not working (whenever i tried to make some changes and update the form) like it giving me an error saying that
    " Error in mru internal routine: ORA-20001: no data found in tabular form "
    I looked at the process MRU, it is OKAY.
    I tried to delete it(the MRU process) and created a new MRU process then also the SAVE button is not working, like it gives the same error.
    " Error in mru internal routine: ORA-20001: no data found in tabular form "
    Can anyone help me out with this issue...!
    what might be the problem?

    There could be two reasons for this error:
    1. in your MRU Process, you didn't type the proper primary key column name
    2. your tabular form is missing the referenced collumn
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    ------------------------------------------------------------------------------

  • Save in BKG not working

    I re-installed CS5 after a reformat, and the 'background save' feature is not working.  I was under the impression that it's a default setting.  Is it something that I can reset?  It was working fine with my first install.

    What csuebele said.
    Background save was a new feature in CS6
    http://www.photoshopessentials.com/basics/background-auto-save-cs6/

  • Mail is not saving attachment and save as is not working

    Suddenly my Mail is not saving attachment and save as is not working. I tried to save an email as I use to do but it is not completing the task. I should I do?
    Thanks for any help,
    Mario Lordeiro

    Mario,
    Was there also NO choice to View As Icon, in the contextual menu? If not, these items/images may be embedded in HTML, rather than true attachments. Other choices for normal attachments would include Open Attachment, Open With, Save to Downloads Folder -- are any of those present in the contextual menu?
    With such a message open, click on View in the menubar, place the cursor on Message in the pull-down menu, and choose Raw Source. Is there any HTML code present? Is there a header immediately before any code representing what you believe is an attached file?
    If need be, I can send you an email message with a known form of attachment.
    Ernie

  • HT2188 iPad 1 requested activation after being low on power. Activation does not work.

    Hi
    My iPad 1 requested activation after being low on power. Activation does not work so I have tried to restore it from iTunes.  this progresses but after rebooting, it gets to the activation process for a few minutes and re-boots again - in a loop now. on ios6, not 7. help please?
    I also looked at trying to do a manual install of firmware via iTunes but I do not know the version of firmware or how to find it out - so really stuck!
    Thanks

    I pulled my unit out of the dock - powered up and the display goes blank (if you look carefully you can see the bios boot screen, then black, then you can see the backlight turn off.
    I plugged in the USB monitor and boom - I could log in.
    Once Logged in I could see that windows still thinks it has some of the monitors from the dock, and the internal display is set to disable.
    So the issue is the detection / setup of monitors in/out of the dock.
    I've done about all I can do for dubugging, I hope lenovo can pick up from here. if not I'll have to call lenovo support.

  • Mail- Save Icon does not work

    I have noticed with mail since 10.5.2 that the small save icon on the email document does not save attachments / does not work anymore. I have to go to file menu and select "Save Attachments"
    Is this a bug or what ??

    John,
    I only now saw your first post. Have you looked in Mail Downloads folder to see if the attachments were saved there? In Mail 3.x, a quick click of the Save button would be expected to result in an unannounced save to that downloads folder. However, a click and brief hold on the Save button would be expected to result in a Save dialogue.
    More info, please.
    Ernie

  • How do i restart my ipod touch if the power off button does not work and it is disabled and it say connect to Itunes

    how do i restart my ipod touch if the power off button does not work and it is disabled and it say connect to Itunekyl

    Place the iPod in recovery mode using this program. and then restore via iTunes.
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • What do i do if my ipod 3 is disabled and the power off button does not work?

    What do I do if my iPod 3 is disabled and  the power off button does not work?

    Did you try restoring your iPod on itunes.

  • Power/lock button does not work. I cannot lock my phone, shut it off or reset it. iPhone5s

    My power/lock button does not work. I am unable to lock, power-off or reset my phone and am unsure of how to rectify this problem when that button isn't working.

    Same here. 64gb iPhone 5s just arrived today. Feels fine but either doesn't respond or *severely* delayed response. Like minutes later... Going for replacement.

Maybe you are looking for