Satellite P200D-11J goes out while starting
Hello!
Have for 2 years a P200D.
Have also XP on it, the not functioning FN and extra keys do not disturb me.
But since beginning in I have the problem that the laptop does not restart itself. Exact said during the new starting it simply goes out
1. While "new start" choosing:
this is not problematic, because it is able to shut down and start. with it no problems.
2. After the installations which require a new start, even when self restartig.
Problem solution was to wait always 10 minutes, then the laptop starting again. Seems to be a hardware problem to be.
If 2 years went well, until I had to make new right now XP. now he goes out every time during the installation. Always in different points, cannot lie with the installation...
What can this be? Power Supply? RAM????
Am curious on your answers.
Hi
Maybe the notebook shuts down automatically due to a higher internal temperature?
What do you think about this idea?
If the temperature is too high, the notebook would shuts down to prevent the hardware parts from damage
I think this could be plausible explanation
Check if the notebook is warmer and try to remove the dust and debris from the cooling modules using the compressed air spray.
I clean my fans from time to time and this prevents the notebook from overheating.
Check it out
Similar Messages
-
UNEXPECTED RESET...I'M LISTENING AND ONLY ONE SONG GOES OUT AND STARTS IN DIFFERENT MENU
UNEXPECTED RESET.
I'M LISTENING MY MUSIC . BUT MY IPOD GOES OUT AND STARTS IN DIFFERENT MENUHello LUISPOLAR11,
It sounds like your iPod classic is playing one song but then stops and appears to go to a different menu. I would start by resetting it:
Reset your iPod - Apple Support
Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears (about 6 to 8 seconds). You might need to repeat this step.
If you have difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also, make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps didn't work, try connecting your iPod to a power adapter. Then, plug the power adapter into an electrical outlet, or connect your iPod to your computer. Make sure that the computer is turned on and isn't set to go to sleep. Try resetting your iPod while it is connected to power.
If the issue persits, I would restore your iPod with iTunes and re sync your data to it:
Restoring iPod to factory settings
Thank you for using Apple Support Communities.
Regards,
Sterling -
OVM services time out while starting
OS: Oracle Linux 6.1 x64
OVM manager services fail to startup with the following message:
[root@pluto ~]# service ovmm restart
Stopping Oracle VM Manager [ OK ]
Starting Oracle VM Manager Time out...
Contents of the AdminServer.log are as follows (Last few lines of error):
####<Sep 16, 2013 1:52:19 PM WST> <Info> <Common> <pluto.int.lansen.com.au> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Def
ault (self-tuning)'> <<WLS Kernel>> <> <> <1379310739976> <WL-000628> <Created "1" resources for pool "OVMDS", out of which "0" are available and "1"
are unavailable.>
####<Sep 16, 2013 1:58:18 PM WST> <Warning> <JDBC> <pluto.int.lansen.com.au> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.De
fault (self-tuning)'> <<WLS Kernel>> <> <> <1379311098971> <WL-001129> <Received exception while creating connection for pool "OVMDS": IO Error: The N
etwork Adapter could not establish the connection>
####<Sep 16, 2013 1:58:18 PM WST> <Info> <JDBC> <pluto.int.lansen.com.au> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Defau
lt (self-tuning)'> <<WLS Kernel>> <> <> <1379311098971> <WL-001156> <Stack trace associated with message 001129 follows:
java.sql.SQLRecoverableException: IO Error: The Network Adapter could not establish the connection
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:443)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:670)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:230)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:567)
at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:404)
at oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:694)
at oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:267)
at oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:134)
at weblogic.jdbc.common.internal.XAConnectionEnvFactory.makeConnection(XAConnectionEnvFactory.java:477)
at weblogic.jdbc.common.internal.XAConnectionEnvFactory.createResource(XAConnectionEnvFactory.java:177)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1249)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1166)
at weblogic.common.resourcepool.ResourcePoolImpl.recreateDeadResources(ResourcePoolImpl.java:2087)
at weblogic.common.resourcepool.ResourcePoolImpl.access$1900(ResourcePoolImpl.java:41)
at weblogic.common.resourcepool.ResourcePoolImpl$ResourcePoolMaintanenceTask.timerExpired(ResourcePoolImpl.java:2706)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: oracle.net.ns.NetException: The Network Adapter could not establish the connection
at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:381)
at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:426)
at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:710)
at oracle.net.ns.NSProtocol.connect(NSProtocol.java:256)
at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1176)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:318)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:670)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:230)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:567)
at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:404)
at oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:694)
at oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:267)
at oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:134)
at weblogic.jdbc.common.internal.XAConnectionEnvFactory.makeConnection(XAConnectionEnvFactory.java:477)
at weblogic.jdbc.common.internal.XAConnectionEnvFactory.createResource(XAConnectionEnvFactory.java:177)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1249)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1166)
at weblogic.common.resourcepool.ResourcePoolImpl.recreateDeadResources(ResourcePoolImpl.java:2087)
at weblogic.common.resourcepool.ResourcePoolImpl.access$1900(ResourcePoolImpl.java:41)
at weblogic.common.resourcepool.ResourcePoolImpl$ResourcePoolMaintanenceTask.timerExpired(ResourcePoolImpl.java:2706)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at oracle.net.nt.MetricsEnabledSocket.connect(TcpNTAdapter.java:619)
at oracle.net.nt.TcpNTAdapter.connect(TcpNTAdapter.java:164)
at oracle.net.nt.ConnOption.connect(ConnOption.java:134)
at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:357)
at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:426)
at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:710)
at oracle.net.ns.NSProtocol.connect(NSProtocol.java:256)
at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1176)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:318)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:670)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:230)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:567)
at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:404)
at oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:694)
at oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:267)
at oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:134)
at weblogic.jdbc.common.internal.XAConnectionEnvFactory.makeConnection(XAConnectionEnvFactory.java:477)
at weblogic.jdbc.common.internal.XAConnectionEnvFactory.createResource(XAConnectionEnvFactory.java:177)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1249)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1166)
at weblogic.common.resourcepool.ResourcePoolImpl.recreateDeadResources(ResourcePoolImpl.java:2087)
at weblogic.common.resourcepool.ResourcePoolImpl.access$1900(ResourcePoolImpl.java:41)
at weblogic.common.resourcepool.ResourcePoolImpl$ResourcePoolMaintanenceTask.timerExpired(ResourcePoolImpl.java:2706)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
####<Sep 16, 2013 1:58:19 PM WST> <Info> <Common> <pluto.int.lansen.com.au> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Def
ault (self-tuning)'> <<WLS Kernel>> <> <> <1379311099973> <WL-000628> <Created "1" resources for pool "OVMDS", out of which "0" are available and "1"
are unavailable.>
Please advise. ThanksHi,
is Oracle VM Manager istalled like VM in VirtualBox or in physical server ?
you have a problem (error) with the Network adapter
ault (self-tuning)'> <<WLS Kernel>> <> <> <1379311098971> <WL-001129> <Received exception while creating connection for pool "OVMDS": IO Error: The Network Adapter could not establish the connection>
####<Sep 16, 2013 1:58:18 PM WST> <Info> <JDBC> <pluto.int.lansen.com.au> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Defau
lt (self-tuning)'> <<WLS Kernel>> <> <> <1379311098971> <WL-001156> <Stack trace associated with message 001129 follows:
java.sql.SQLRecoverableException: IO Error: The Network Adapter could not establish the connection
and
Caused By: java.net.ConnectException: Connection refused
verify with your network configuration
lokk at this URL, if you are using VirtualBox
I hope this can help you
Best Regards -
Error 1053 comes out while starting oc4j service through windows services
HI EVERYBODY
I face some problem and I'll be very happy if i recieved any reply from u.
here is my problem :
I used the code which starts/stops OC4J-standalone as a Windows service using
java service for install and uninstall the service(the code is shown down),however the code works well
and the service install and uninstall successfully.
but when I start the service throught the windows servecis manager this error comes out:
* Error 1053: The service did not respond to the start or control request in a timely fashion"
and the status of the service stay "starting"*
I found solution by adding "DWORD Value" in the registry and modify it to 60000
but it didn't work and still this error come out.
Any help will be appreciated.
the code is :
install_OC4J_Service :
Setlocal
@rem Note that if JVM not found, service 'does not report an error' when startup fails, although event is logged
if "%JAVA_HOME%" == "" set "JAVA_HOME"=C:\Program Files\Java
REM set the display name of the service
set JSNAME=OC4J_Service
REM Set the Java server directory
set JVMDIR=%JAVA_HOME%\jre1.6.0_01\bin\client
REM Setting a bind directory for the software
set JSBINDIR=%CD%
REM Setting path and filename of the (renamed) javaservice executable
set JSEXE=%JSBINDIR%\OC4J_Service.exe
REM Stating the directory of the OC4J-home
set OC4J_HOME=E:\DevSuiteHome_1\j2ee\home
REM just to check the used version @echo . To install the service "%JSNAME%" the following version of JavaService executable is used: @ echo . %JSEXE% -version @echo .
@echo Installing service OC4J_Service ... Press Enter to continu or press Control-C to abort installation
@pause
@echo
%JSEXE% -install %JSNAME% %JVMDIR%\jvm.dll -Djdbc.debug=true java.class.path=%OC4J_HOME%\oc4j.jar –Xmx256M -start com.evermind.server.OC4JServer -params -config %OC4J_HOME%\config\server.xml -out %OC4J_HOME%\log\OC4J_service_stdout.log -err %OC4J_HOME%\log\OC4J_service_stderr.log -current %JSBINDIR% -manual -description "OC4JService"
@echo
@echo End of Installation
@pause
uninstall_OC4J_Service:
@echo off
@echo . Uninstall_OC4JService.cmd - de-install of JavaService executable using OC4J.jar
@echo .
setlocal
@rem Note that if JVM not found, service 'does not report an error' when startup fails, although event logged
if "%JAVA_HOME%" == "" set JAVA_HOME=c:\java\j2sdk142
set JVMDIR=%JAVA_HOME%\jre1.6.0_01\bin\client
set JSBINDIR=%CD%
set JSEXE=%JSBINDIR%\OC4J_Service.exe
@echo . Using following version of JavaService executable:
@echo .
%JSEXE% -version
@echo .
@echo Un-installing service OC4J_Service ... Press Control-C to abort
@pause
@echo .
%JSEXE% -uninstall OC4J_Service
@echo .
@echo End of script
@pause
-------------------------------------------------------------------------Any recent change? Use below command to validate the opmn.xml file.
opmnctl validate
Replace the opmn.xml backup file in $ORACLE_HOME/opmn/conf and try starting opmn.
Also ipm.log file in $ORACLE_HOME/opmn/log folder -
Outgoing Mail only goes out while in network?
I can receive e-mail wherever I am located. But for some reason outgoing mail only work while at home. When my macbook is in my office (I have a network at home and at work) I can't send out e-mail. Anybody know why?
Mail Help has some articles devoted to sending problems, e.g. “I can't send email” or “I can't send email because the connection to the server on port 25 timed out”. You may want to take a look at them in case there is something there that applies to you.
Something that usually works if you’re trying to use an outgoing (SMTP) server different from the one provided by your ISP (and in the case of .Mac in particular) is changing the outgoing server port to 587 instead of 25 in Preferences > Accounts > Account Information > Outgoing Mail Server > Server Settings.
BTW, please update the Computer Model and/or the Operating System fields on your My Settings’s profile (and click Save), so that it accurately reflects the version of Mac OS X you're using now. What shows up there now doesn’t make sense. -
Internet randomly goes out while still connected to wireless
So I'll randomly lose internet connection while surfing the web. I'll still be connected to the wireless and other devices/computers will work as well; however, pages will no longer load and any files will stop downloading. Sometimes it'll happen after a few minutes of usage or a few hours. If I turn off wifi on my iMac and then turn it back on, my computer connects to wifi and the internet will be working again. Sometimes I can also click "Renew DHCP Lease" in the settings menu and that will fix it; however, sometimes when I do that it will disconnect me from the wireless and then reconnect me but it will say "no internet connection" (problem is solved by turning wifi on and off). All the computers on our network have a reserved IP/MAC address on our router as well.
I have an iMac running Lion, D-Link DIR-645 router, Motorola SB6121 modem, Comcast Blast internet. None of my housemates seem to be having the same problem.
Any suggestions??Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use. -
Ipod 4g goes black out while playing games
i dont know whether you guys have experinced this but my ipod 4g goes black out while playing some games. its like when im playing games half way, the ipood will auto close the app that im playing. Does this means that my ipod is having problem?
Btw My IPOD 4G WAS JAILBREAK BEFORE.BUT I RESTORE BACK NORMALLYSee:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
One of out DB while starting gives error ORA-03113
One of out DB while starting gives error ORA-03113. Need some inputs to resolve this issue.
SQL> startup
ORACLE instance started.
Total System Global Area 603979776 bytes
Fixed Size 1250380 bytes
Variable Size 163580852 bytes
Database Buffers 432013312 bytes
Redo Buffers 7135232 bytes
Database mounted.
ORA-03113: end-of-file on communication channelRegards,
LokanathPlease find the dts.
Mon Jan 09 16:12:41 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Mon Jan 09 16:12:41 2012
alter database mount exclusive
Mon Jan 09 16:12:48 2012
Setting recovery target incarnation to 2
Mon Jan 09 16:12:49 2012
Successful mount of redo thread 1, with mount id 3125175737
Mon Jan 09 16:12:49 2012
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Mon Jan 09 16:12:49 2012
alter database open
Mon Jan 09 16:12:51 2012
Rolling back half complete log switch of thread 1
Mon Jan 09 16:12:52 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_lgwr_5024.trc:
ORA-00202: control file: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\ECUPROG\CONTROL01.CTL'
ORA-27091: unable to queue I/O
ORA-27069: attempt to do I/O beyond the range of the file
OSD-04026: Invalid parameter passed. (OS 432)
Mon Jan 09 16:12:56 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_lgwr_5024.trc:
ORA-00204: error in reading (block 432, # blocks 1) of control file
ORA-00202: control file: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\ECUPROG\CONTROL01.CTL'
ORA-27091: unable to queue I/O
ORA-27069: attempt to do I/O beyond the range of the file
OSD-04026: Invalid parameter passed. (OS 432)
LGWR: terminating instance due to error 204
Mon Jan 09 16:12:58 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_dbw0_5264.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 16:13:00 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_pmon_3784.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 16:13:01 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_psp0_4388.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 16:13:01 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_mman_4828.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 16:13:01 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_ckpt_2604.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 16:13:01 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_reco_4492.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 16:13:02 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_smon_4484.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 16:13:03 2012
Instance terminated by LGWR, pid = 5024
Mon Jan 09 16:15:01 2012
WARNING: inbound connection timed out (ORA-3136)
Mon Jan 09 16:29:35 2012
WARNING: inbound connection timed out (ORA-3136)
Mon Jan 09 16:55:01 2012
WARNING: inbound connection timed out (ORA-3136)
Mon Jan 09 17:06:50 2012
WARNING: inbound connection timed out (ORA-3136)
Mon Jan 09 17:07:52 2012
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 155189248
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
sga_target = 603979776
control_files = D:\ORACLE\PRODUCT\10.2.0\ORADATA\ECUPROG\CONTROL01.CTL, D:\ORACLE\PRODUCT\10.2.0\ORADATA\ECUPROG\CONTROL02.CTL, D:\ORACLE\PRODUCT\10.2.0\ORADATA\ECUPROG\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 432013312
compatible = 10.2.0.1.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = D:\oracle\product\10.2.0/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=ecuprogXDB)
job_queue_processes = 10
audit_file_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ECUPROG\ADUMP
background_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ECUPROG\BDUMP
user_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ECUPROG\UDUMP
core_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ECUPROG\CDUMP
db_name = ecuprog
open_cursors = 300
pga_aggregate_target = 201326592
PMON started with pid=2, OS id=4832
PSP0 started with pid=3, OS id=4208
MMAN started with pid=4, OS id=3216
DBW0 started with pid=5, OS id=4020
LGWR started with pid=6, OS id=4728
CKPT started with pid=7, OS id=4860
SMON started with pid=8, OS id=2932
RECO started with pid=9, OS id=3772
CJQ0 started with pid=10, OS id=5244
MMON started with pid=11, OS id=4568
MMNL started with pid=12, OS id=5828
Mon Jan 09 17:07:53 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Mon Jan 09 17:07:53 2012
ALTER DATABASE MOUNT
Mon Jan 09 17:07:58 2012
Setting recovery target incarnation to 2
Mon Jan 09 17:07:59 2012
Successful mount of redo thread 1, with mount id 3125157033
Mon Jan 09 17:07:59 2012
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Mon Jan 09 17:07:59 2012
ALTER DATABASE OPEN
Mon Jan 09 17:08:01 2012
Rolling back half complete log switch of thread 1
Mon Jan 09 17:08:02 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_lgwr_4728.trc:
ORA-00202: control file: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\ECUPROG\CONTROL01.CTL'
ORA-27091: unable to queue I/O
ORA-27069: attempt to do I/O beyond the range of the file
OSD-04026: Invalid parameter passed. (OS 432)
Mon Jan 09 17:08:05 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_lgwr_4728.trc:
ORA-00204: error in reading (block 432, # blocks 1) of control file
ORA-00202: control file: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\ECUPROG\CONTROL01.CTL'
ORA-27091: unable to queue I/O
ORA-27069: attempt to do I/O beyond the range of the file
OSD-04026: Invalid parameter passed. (OS 432)
LGWR: terminating instance due to error 204
Mon Jan 09 17:08:06 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_dbw0_4020.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 17:08:07 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_pmon_4832.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 17:08:07 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_reco_3772.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 17:08:07 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_smon_2932.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 17:08:07 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_ckpt_4860.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 17:08:09 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_psp0_4208.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Mon Jan 09 17:08:09 2012
Errors in file d:\oracle\product\10.2.0\admin\ecuprog\bdump\ecuprog_mman_3216.trc:
ORA-00204: error in reading (block , # blocks ) of control file
Instance terminated by LGWR, pid = 4728 -
While Starting oacleAS time out while waiting for a managed process start
Hello Friends,
While starting the Oracle Application server, through OPMN command as well as from the services I am getting following error.
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=hydcgwsgess02:6200
0 of 1 processes started.
ias-instance id=GenPro.hydcgwsgess02.ind.ge.ad
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OC4J/home/default_group/
Error
--> Process (index=1,uid=461249245,pid=12988)
time out while waiting for a managed process to start
Log:
D:\product\10.1.3\OracleAS_1\opmn\logs\OC4J~home~default_group~1
========================================================
couldn't figure out what is the basic problem...
Normally when ever I make any changes in Oracle Sensor Edge Server, I used to get this error..
I have installed the Oracle Apps Server in Windows enviroment...
I will be very happy if some body can help me resolve the issue...
Regards
Nasimi got the same error but in my case, I used HTTPDispatcher and found that the URL parameter was invalid, so I changed it in the edgeserver.xml and restart, it's ok for me.
Edited by: blackwaterpark on Oct 29, 2008 2:21 PM -
OacleAS time out while waiting for a managed process start
Hello Friends,
While starting the Oracle Application server, through OPMN command as well as from the services I am getting following error.
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=hydcgwsgess02:6200
0 of 1 processes started.
ias-instance id=GenPro.hydcgwsgess02.ind.ge.ad
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OC4J/home/default_group/
Error
--> Process (index=1,uid=461249245,pid=12988)
time out while waiting for a managed process to start
Log:
D:\product\10.1.3\OracleAS_1\opmn\logs\OC4J~home~default_group~1
========================================================
couldn't figure out what is the basic problem...
Normally when ever I make any changes in Oracle Sensor Edge Server, I used to get this error..
I have installed the Oracle Apps Server in Windows enviroment...
I will be very happy if some body can help me resolve the issue...
Regards
NasimCan't tell you what's wrong with just this much of information. Take a look at this log file (as reported in the error message):
D:\product\10.1.3\OracleAS_1\opmn\logs\OC4J~home~default_group~1
And also:
D:\product\10.1.3\OracleAS_1\j2ee\home\log\home_default_group_1\server.log
These two log files will give you bit more information to help diagnose the issue.
Thanks
Shail -
Time out while waiting for the managed process to start
Hi All,
Im getting the below error,when i try to start all managed processes.
Its taking too much time to execute "opmnctl startall "command and it will give the below error.
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=inkolv1lp01:6201
0 of 3 processes started.
ias-instance id=retek101202.inkolv1lp01
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=401608)
time out while waiting for a managed process to start
Log:
/retek/product/app_server/101202/OracleFRM_13/opmn/logs/HTTP_Server~1
ias-component/process-type/process-set:
WebCache/WebCache/WebCache
Error
--> Process (pid=319598)
time out while waiting for a managed process to start
Log:
/retek/product/app_server/101202/OracleFRM_13/opmn/logs/WebCache~WebCache~1
ias-component/process-type/process-set:
WebCache/WebCacheAdmin/WebCacheAdmin
Error
--> Process (pid=397550)
time out while waiting for a managed process to start
Log:
/retek/product/app_server/101202/OracleFRM_13/opmn/logs/WebCache~WebCacheAdmin~1
Im in between some work ,please help to resolve the isueHi,
I checked the log files and i think it has some errors.I dint get exactly what does it mean.
Web Cache ($ORACLE_HOME/webcache/logs :
- event_log contains
[18/Apr/2012:11:16:26 -0500] [notification 9612] [ecid: -] OracleAS Web Cache 10g (10.1.2), Build 10.1.2.0.2 050802
[18/Apr/2012:11:16:26 -0500] [notification 9403] [ecid: -] Maximum number of file/socket descriptors set to 900.
[18/Apr/2012:11:16:26 -0500] [notification 9612] [ecid: -] OracleAS Web Cache 10g (10.1.2), Build 10.1.2.0.2 050802
[18/Apr/2012:11:16:26 -0500] [notification 9403] [ecid: -] Maximum number of file/socket descriptors set to 900.
[18/Apr/2012:11:16:31 -0500] [notification 13002] [ecid: -] Maximum allowed incoming connections are 700
[18/Apr/2012:11:16:31 -0500] [notification 13002] [ecid: -] Maximum allowed incoming connections are 700
[18/Apr/2012:11:17:01 -0500] [warning 11917] [ecid: -] SSL wallet Origin Server Wallet file /etc/ORACLE/WALLETS/oret13/ewallet.p12 does not exist.
[18/Apr/2012:11:17:01 -0500] [warning 11917] [ecid: -] SSL wallet Origin Server Wallet file /etc/ORACLE/WALLETS/oret13/ewallet.der does not exist.
[18/Apr/2012:11:17:01 -0500] [warning 11919] [ecid: -] The SSL wallet autologin file /etc/ORACLE/WALLETS/oret13/cwallet.sso does not exist. Wallet does not appear to be
autologin wallet.
[18/Apr/2012:11:17:01 -0500] [warning 11921] [ecid: -] The origin server wallet did not open. Operating without wallet for backend. Only Diffie-Hellman anonymous connec
tions supported to origin servers.
[18/Apr/2012:11:17:01 -0500] [warning 11922] [ecid: -] Origin Server Wallet wallet fails to open at location /etc/ORACLE/WALLETS/oret13, NZE-28759, as user oret13
[18/Apr/2012:11:17:01 -0500] [warning 11917] [ecid: -] SSL wallet Origin Server Wallet file /etc/ORACLE/WALLETS/oret13/ewallet.p12 does not exist.
[18/Apr/2012:11:17:01 -0500] [warning 11917] [ecid: -] SSL wallet Origin Server Wallet file /etc/ORACLE/WALLETS/oret13/ewallet.der does not exist.
[18/Apr/2012:11:17:01 -0500] [warning 11919] [ecid: -] The SSL wallet autologin file /etc/ORACLE/WALLETS/oret13/cwallet.sso does not exist. Wallet does not appear to be
autologin wallet.
2)Oracle HTTP Server ($ORACLE_HOME/Apache/Apache/logs has these details
access_log.1307016000 mod_oc4j.753776.shm.sem
access_log.1307059200 mod_oc4j.815188.shm.mem
access_log.1307102400 mod_oc4j.815188.shm.sem
access_log.1307145600 mod_oc4j.843922.shm.mem
access_log.1307361600 mod_oc4j.843922.shm.sem
access_log.1307404800 mod_oc4j.872618.shm.mem
access_log.1307448000 mod_oc4j.872618.shm.sem
access_log.1307491200 mod_oc4j.872692.shm.mem
access_log.1307534400 mod_oc4j.872692.shm.sem
access_log.1307577600 oracle -
Firefox starts but goes out. it just keeps on doing that
I click on the firefox icon and it starts up where its loading the homepage but it doesnt fully load. it closes. it continues doing that so i cant even click on anything cause it goes out so fast. i uninstall it and install it again but it does the same thing. i even shutdown my laptop but it continues to do the same thing.
You can check if you can start Firefox in <u>[[Safe Mode|Safe Mode]]</u> by holding down the Shift/Options key.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating -
my ipad2 keeps cutting out and going back to start up screen?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again. -
Macbook Pro won't start up, white light turns on, then goes out.
My Macbook Pro froze, so I hit the power button, and now it will not turn on.
When I press the power button the white light on the front comes on, and then goes out after about 6 seconds along with that noise it normally makes when turning off. Also if I cover both speakers the light fades.
This used to happen to me pretty regularly, and in the past it seems just a matter of giving it 24hrs and then trying to turn it on and it usually fixes itself by then. But I've started taking on freelance clients so I can't deal with this crap anymore and would like to know why this is happening. I've taken it to Genius's before but by the time I get there it is turning on again, and they have no answers for me.You could try reseting the PRAM/NVRAM (http://support.apple.com/kb/HT1379, see section titled "Resetting PRAM and NVRAM") or reseting the SMC (http://support.apple.com/kb/HT3964).
-
my 2007 20inch Imac keeps freezing/crashing and the mouse is moving while its frozen? is the hard drive going out? how can I fix it?
Whats the problem? how can I fix it?komivi wrote:
my 2007 20inch Imac keeps freezing/crashing and the mouse is moving while its frozen?
How large is your HD? How much space do you have left?
is the hard drive going out? how can I fix it?
Failing Hard Drive Sounds
How to Tell When Your Hard Drive is Going to Fail
Be prepared for hard-drive failure
Maybe you are looking for
-
Shared variable engine memory problem
Hello, I have a lot of problems with DSC 8. The server that worked very well in DSC 7, in DSC 8 is creating a lot of problems starting with memory leaks in tagsrv process. I have over 5000 shared variables and when I publish them the tagsrv is around
-
Release date for service pack for 9.2
When is the release date for weblogic 9.2 sp1? What bug fixes are included in this release?
-
Newbie Question: Command for only Y or N in a column.
I am just starting on SQL developer and need to know how to enter the command to change a table so that it will only accept a Y or N in the column. I know this is exceedingly simple but how do do it appears nowhere in my textbook. Thank you!
-
Sun cluster patch for solaris 10 x86
I have Solaris 10 6/06 installed on x4100 box with 2 node clustering using Sun Cluster 3.1 8/05. I just want to know is there any latest patches available for the OS to prevent cluster related bugs. what are they? My kernel patch is 118855-19. any in
-
Nat. Inst Folks - I can't believe you're not getting dozens of complaints about this. Your Measurement Studio .NET installer is toasting the normal include paths for Visual C++. This makes Visual C++ unable to find system include files like , and hen