Satellite P205-S6277: Can I take off the battery and connect the power too?

I am working on my notebook Toshiba satellite P205-S6277, 80% of my time at home.
Can I take off the battery and connect the power to a backup UPS in order to make battery life longer?
I can charge it once a week.

Of course you can do this. You can remove the battery and work on AC power supply only. Be sure there is no dust on the desk and the battery place on the notebook stay clean for further usage.
Bye

Similar Messages

  • HT201150 How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?

    How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
    With the position of the power button on the Retina MacBooks, any mistake turns off the screen in the middle of a presentation or any activity using a projector or big screen — a huge waste of time to wake up the display, enter password, have the projector sync back, watch audience disconnecting from what was being discussed, etc.
    This is very annoying, and seems to add to the increasing collection of options Apple decided to make by itself instead of allowing the user to choose.
    Come on Apple guys, I'm using my Mac because I want options and lots of preferences to tweak to my needs.
    If I needed the lobotomized version I'd be using my iPad!
    Any way (official or hack) to change this button back to its proper funcionality?
    Thanks!

    cterra wrote:
    How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
    Not what you want, but you can get the shut down / restart / sleep dialog by holding the power button

  • Searching icon drains the battery and freeze the BB

    after I downloaded the latest update on BB Application World two days ago, my BB (Tour) is constantly searching for something.  The battery only holds less than 2 hours.  Evey step takes forever while the searching icon (small square clock face) is showing.  Does anyone experiene this problem?  before download, i did not experience this issue.

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Help 'How can i take off iDVD 08 and reinstall iDVD 05'

    Hi all,
    I tried to install iDVD 08 on my little old G4 (1Ghz) with a ATi Rage Pro (16Mb) Graphics card. And well to my disappointment iDVD 08 does not support it ;( So now i want to take iDVD 08 off, and delete it and reinstall iDVD 05 from install DVD...
    How can i do this i have tried numerous of times to install iDVD 05 and now it keeps crashing - well it just does not even load!! :(( Help!!

    I gotta be fair that's so weird and so helpful to - like you i set up another user and by amazement it worked - sir you are amazing good hack - just wondering if i copied the pref's over would it also work as default ?? Surely those wonderful people at Apple could do a quick fix for us old iLife 05 users who have G4 and G5 macs with small graphic cards... we need our old iLife (iDVD 05) back just a quick fix - pretty please lol

  • How can I turn OFF Google instant ,and remove the Magnifying glass Hinderance

    Firefox recently asked me to upgrade from 3.6.13 to 3.6.15 stating that 3.6.15 was more stable and addressed certain security issues. When doing a web search with Google through Firefox 3.6.13 I had the option (on the right hand side of the page) to either enable or DISABLE Google instant search which I rapidly did. Unfortunately in F-F 3.6.15 even though I select Instant search and [preview of webpage] to be OFF it seems to switch itself back on again.It only allows me to search one page Then Fades Out page 2 onwards and then Siezes up entirely. So am constantly having to switch Firefox off then start it up again before performing a new search. Please help me to permanently Disable Google Instant search and Preview of Webpage.

    Try to clear the Google cookies and redo those Google options.
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

  • My macbook screen was black after waking from sleep, I took out the battery and now the screen stays frozen white with the apple and loading bar

    Ant ideas what might be wrong, or how to fix it?
    Thanks!

    jellybell wrote:
    Ant ideas what might be wrong, or how to fix it?
    Thanks!
    Your caches may be corrupted. Try a Safe Boot by pressing the Shift key. You should see a progress bar. It's important to let this Safe Boot run its course without interruption; otherwise, you can trash the file system badly enough to require a restore from backup. (Been there, done that. Lesson learned!)

  • T42P. Does not boot/startup. Black screen. All indicators except the battery and power are off.

    Hi all,
    I am new to the forum and so very desperate for help!
    I have a T42P (2373-C61) machine. All of the sudden today, it blue-screened. I turned it off, then tried to turn it back on.
    Now, it is not coming up at all. I can not even get to the BIOS or see anything in the screen!
    All the lights/indicators are off except these two: the battery/power and the little z (the on indicator).
    The NumLk and Caps Lock indicators flash every 15 seconds or so.
    The hard drive, bluetooth, and wireless lights are off completely.
    Tried getting to the BIOS by unplugging the battery and using the AC only but nothing happens when I press F1 or the IBM button.
    Also, tried a suggestion from other users that requires unplugging Battery/AC, pressing Power button 10 times, then the 11th time for 30 sec. Still nothing happens.
    No HW/SW was added to the machine recently...
    Any suggestions is appreciated..

    It can also be the LCD itself...
    BTW, if the graphic card has failed that equals motherboard replacement since it's soldered to the planar...
    Let's hope not...
    Good luck and keep us posted.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Took my 9350 to the desktop and installed the software and it updated my curve.

    now it wants me to sign in with a blackberry id username and blackberry id password.  does this automatically happen when i got my blackberry?  i have never used blackberry as email.  i have an email account that the blackberry sees when i get a new email in this account.  or should i ignore the screen?  do i lose my apps that came with the phone?  i kinda laugh though at losing over two hundred contacts and think, so what?  no big deal.  at least i'm retired and the golf course knows where i am at if they need help...  nice place to work...  free beer occasionaly...  charlie

    Hi there,
    Well, first off "it" did not update your device...you allowed it to do that update...I know of no conditions where the Desktop Software forces any updates at all..the end user always remains in complete control.
    BB ID is the latest evolution in the RIM account unification process. There are many services that RIM and the carriers host for those that subscribe to an adequate data plan. Previously, each service required independent credentials...with BB ID, they are attempting to unify all of those separate credentials into one unified system, and embed that credential into a base level of the BB so that you only must log into BB ID once, and your BB remembers those credentials from then on, even if you reboot.
    KB23716 What is a BlackBerry ID
    But, in some circumstances, reloading an OS or performing an OS update, the BB ID credentials, saved to the BB, may get lost...and, after the update, you need to re-save those credentials (again, just the one time) to your BB upon it's first reboot after the update.
    So, if you previously created a BB ID, then you need to use those exact credentials now. If you never created a BB ID, then proceed now with creating one -- for it is now required by the BB OS level that you allowed to be installed to your BB.
    Now, to your specific questions:
    chaskuchar wrote:
    now it wants me to sign in with a blackberry id username and blackberry id password.  does this automatically happen when i got my blackberry?
    Explained above.
    chaskuchar wrote:
    i have never used blackberry as email.  i have an email account that the blackberry sees when i get a new email in this account.
    Hmmm...that's confusing. You have an email account that you integrated to your BB previously? And it's not now showing to you? If so, then after any update, I always recommend the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive to your Messages app
    2) Delete and Resend Service Books
    KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
    If you have no CMIME entry, then skip the deletion
    KB02830 Send the service books for the BlackBerry Internet Service
    Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
    3) Batt Pull Reboot
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    chaskuchar wrote:
    or should i ignore the screen?
    No...BB ID is mandatory with newer OS levels.
    chaskuchar wrote:
    do i lose my apps that came with the phone?
    I'm not sure what specific apps you are concerned about...there are a set of built-in added apps that do sometimes change out with changes to OS levels. But, specifics would help more.
    chaskuchar wrote:
    i kinda laugh though at losing over two hundred contacts and think, so what?  no big deal.
    That should not happen...during most update processes, the process takes a backup and then restores your data afterwards. But, sometimes the user can defeat that...if you did, well, then...
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • A 305- S6825 will not start with the battery and charger. There's no light, no noise on fan or HDD

    PC will not start with the battery and charger. There's no light, no noise on fan, hard drive and CD writer. The hard drive, fan and charger are new. But I was havingproblems and sudden blackouts System 32. Try several times to install theoperating system but the pc turned off suddenly and restarted until I stop working completely. Now it does nothing and no light. I hope it can help me I need torespect and love very much this notebook.
    Thanks in advance
    Jose Echevarria
    [email protected]

    Turn off your laptop, unplug all wires, remove the battery, and hold the power button for thirty seconds. Afterwards, reattach the battery and connections. If it still won't start, remove the battery and start with just the AC power. Next try without the AC power and just the battery.
    - Peter

  • Updated to 4.4 and now my Bluetooth 'studders' when listening to music and a phone call. Yes I have reset the phone and removed the battery.

    I just updated my Note 3 to 4.4.2. Since then when I listen to music or make a call on my Bluetooth my music and calls 'studders' and has some type of 'drop-outs' during the music and calls. This was not the case prior to the update.
    Yes, I have power down the phone. Yes, I have removed the battery and restarted the phone. My Bluetooth headset is an LG 730. I tried listening to music on my other Bluetooth devices and they also 'studders' and has drop-outs during calls and music. I connected with a wired headset and the 'studdering' disappeared.
    Is there a way to revert back to the previous 4.3 version of Android. I use my phone extensively for business and drive with it. The law for my state requires 'hands free' usage of my phone.

    Unfortunately, I was forced to do a factory Reset. This wiped the device to a new state.
    Afterwards all Blue-tooth, wi-fi and calls operated fine.
    I would advise that you notify your customers that they would most likely have to do a Factory Reset once they update their device.
    All contacts, pictures, data and applications were either lost or had to be reinstalled.
    Laurence
    (Removed)
    Private info removed as required by the Verizon Wireless Terms of Service

  • Small electric shocks, laptop refused to start until I remove the battery and put it back in.

    I own a Dell Inspiron 15 7000 Series i7537T-5005sLV.
    A short while ago I tried to power on my laptop but it didn't come on. I thought that the battery drained and I didn't notice however when I plugged in the power cord no lights came on. I decided to open up the laptop and remove the battery and put back the battery and try to power on the laptop. It came on after doing that and I saw lights again.
    I also notice that after reseating the battery, the latency between pressing the power button and the laptop actually coming on is shorter. It is almost instantaneous.Before there was about a 1.5 seconds delay. (THIS COULD BE MY IMAGINATION THOUGH)
    I also noticed that I got little "pinches" or small shocks when my skin comes in contact with the edge of the laptop, especially at the end of the palm rest area. The shocking sensation could be cause the hair on my hands as my skin brush along the edges of the laptop as I type. I say this because I've never experienced a shock touching anywhere else on the laptop and I never felt a shock while using the tips of my fingers to touch the edges. 
    One last thing I feel I should mention. Around the SD card slot area there is a small dent protruding outwards; barely noticeable. It was a brand new laptop and the seal on the box wasn't broken or tampered with so I am assuming that this was a manufacture's defect. One I was willing to overlook since the dent wasn't that bad and added some character to the laptop. However I am beginning to worry that the unit might be damaged and that is why I had the power issue.
    The laptop is about two weeks old. I had to replace the first one because the display had horizontal waves running from top to bottom. Even in the BIOS. They were especially visible against gray backgrounds.
    I don't want to have to return another one and I like the laptop but if it is unsafe to use then I'd rather send it back and keep my life.

    Hi Groudie,
     I would suggest you to use the system in a work place or your friends place to check if issue reoccurs.

  • How can I take off FINAL DRAFT written in diagonal in the middle of every pages of my document.

    How can I take off FINAL DRAFT written in diagonal in the middle of every pages of my document.

    Then ask whoever sent it to you to remove it and create a new PDF.
    There is one thing you can check first and that’s layers in the PDF. Perhaps whoever created it put that on a top layer and you can just turn it off.

  • How can you take off the volume limit?, How can you take off the volume limit?

    How can you take off the volume  limit on iPod touch ?

    Which "volume limit" do you mean?
    All iPods have a volume limit feature that you can set yourself and on your iPod, go into Settings/Music/Volume Limit. There, you can set the volume limit to maximum, which is the same as turning it off.
    However, if you mean the EU (European Union) volume restriction, on all iPods sold inside the EU, you cannot turn that off.

  • My iphone fall in the sea and now it's not working how i can take off my photo and numbers ? and do u thing it will be work or what plz help me !!!!!!!!!!!!!!!

    my iphone fall in the sea and now it's not working how i can take off my photo and numbers ? and do u thing it will be work or what plz help me !!!!!!!!!!!!!!!

    Sea water and electronics don't mix.  The salinity fries the internal circuitry of the phone. Your phone is toast.
    Certainly the user of any device which can be lost, stolen, or dropped in the sea would be smart enough to have had the data backed up, rght?  Your photos and numbers should be safely backed up on your computer or in the cloud.
    If you didn't do this, there's no way to recover those data now.  Backups are meant to be done BEFORE disaster strikes, not after.

  • How can i take off the notebook s name

    I ve bought my Macbook Pro to another person and now
    Before to give the macbook to her i need to
    Take off the name i d given to it.
    I d like to delete things to macbook start
    From zero...for new notebook owner
    Will be able to give another name to it
    And havent see anything of me in this notebook.

    You must erase the drive and reinstall Mac OS X. If your Mac came with DVDs:
    1. Insert the Mac OS X disc and press C key while your Mac is starting.
    2. Go to Utilities > Disk Utility, select Macintosh HD in the sidebar and erase the drive.
    3. Install Mac OS X. When the installation finishes, turn off the computer.
    If your computer didn't come with DVDs:
    1. Press Command, Option and R keys while your computer is starting and open Disk Utility.
    2. Select Macintosh HD in the sidebar and erase the disk.
    3. Install Mac OS X. When the installation finishes, turn off your Mac

Maybe you are looking for

  • Berkeley DB Java Edition (JE) and JRuby Interoperability

    I finally got around to doing a quick test of calling Berkeley DB Java Edition (JE) from JRuby (JRuby is a 100% pure-Java implementation of Ruby). Before we get to JE and JRuby you probably want to know the answer to this question: "Why you would wan

  • OfficeJet Pro 8600 connects wireless, but no connection on other web services

    I installed my new OfficeJet 8600 to work on wireless network and enabled and tested eprinting and all was well.  Every time we lost power the printer would forget the network and I would have to re-setup the wireless connection.  I then folled the d

  • G3 Modem and ATA Controller Card

    I am upgrading a B&W G3 350 MHz Yosemite running Tiger for some friends. They use dial-up (pooh) and the B&W did not ship with an internal modem. I found an Apple OEM on welovemacs.com for $60 ($10 more than the Apple USB). I am not sure which route

  • Install The ERP SAP Best Practices Baseline Package (VE)

    Hello We would like to install The ERP SAP Best Practices Baseline Package (VE) And reviewing the  Quick Guide to Installing the SAP Best Practices Baseline Package (VE), included in the SAP NOTE 1171816, in the list of components installed we need S

  • Gradient has stripes & workflow of save as web file question

    Hi! Working now with AI CS6. I have a gradient with 3 colours, but unfortunatly you can see stripes within the gradient, like it is devided in many little steps. Any ideas how to solve this? The gradient should be very, very smooth. Second question c