Satellite P30 - Blue screen after reinstall OS

I just reinstall OS (Windows XP) on my older laptop Toshiba Satellite P30, but after first reboot (required to continue XP configuration) the DOS blue screen appear (System Has Recovered From Serious Error).
The laptop cannot load Windows XP at all. Do you have some idea whats going on ?
Thanks :)

Hi,
This looks like a hardware issue. You should check the HDD and RAM.
http://www.hitachigst.com/hdd/support/download.htm#DFT
With the Drive Fitness Test you can test your HDD. Download the CD image, burn it on a CD and boot from it. Then you can the HDD.
On the same website is a user guide if you want to know more.
http://memtest86.com/
Memtest86 is a diagnostic tool to check the RAM. There you can also download a CD image.
Its easy to use. Run the test 3-4 hours and then you will see if the RAM has some errors.
Good luck!
Bye

Similar Messages

Blue screen after reinstall of 10.1, how to remove OS X and start over?

I updated 10.1 to 10.1.5 a month ago, then Software Update found additional updates to 10.1.5. After running them, several applications (especially Flash) stopped working correctly.
I attempted Disk Utility etc and found nothing wrong. I then attempted to uninstall 10.1.5 with the original 10.1 install disc but it does not allow that option. In desperation I tried installing 10.1 from the DVD, which it said was successful, but on reboot (after the normal MAc OSX bootup window) I get a blue screen with black-lettered clock in the upper right and a moveable mouse pointer but no desktop and all keys give only the submarine sound.
I am now running from the 10.1 System on another drive.
How do I remove all OSX stuff from my original hardrive and start over?

You cannot install a previous version of OS X over a more recent version without first erasing the hard drive (at least in your case because of the versions involved.) To reinstall 10.1 over 10.1.5 requires that you erase the hard drive, then install 10.1.
You might have saved some time and trouble by simply updating the software that wasn't working to newer versions that are compatible with the version of OS X you have installed.

Blue Screen after clean reinstall snow leopard

I have a mid 2011 that came with Snow Leopard and disks. I upgraded from there to Lion - then whatever came next and to Mavericks and finally Yosemite, which was a nightmare for me. I did not use disks of any of the rest. So I just decided to take my disks and go back to Snow Leopard. I did this and it asked to go to disk utility and repair both the HD and Permissions. It came out ok, but there was an instance where looking at the list in HD repair, I saw Suid File System Library Core was moved and cannot be repaired. I went ahead and erased the Hard Drive. Then closed out and installed Snow Leopard. I'm not sure I did it right because I had to rename the new start up disk and typed in unnamed 1.
after that I was able to start up to Snow Leopard. It worked fine until I tried to download all the updates. Then it didn't seem to restart, but just went to the sign in screen. So I had to keep shutting down and turning it back on. No updates. One of times I started up, I got the blue screen after the apple and gray screen.
Also on start up the apple comes up without the chime. Last night I got some instructions from a similar situation and tried to use my disk to a clean reinstall all over. It didn't work, still the blue screen. (it does fine in safemode.)
I need help to get this mac running. If someone can help me......

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Blue Screen After Load, No Safe Boot, No Reinstall possible. Think you can figure this one out??

MacBook Pro "Core i7" 2.2 15" Early 2011
2.2 GHz Core i7 (I7-2720QM)
Intro.
February 24, 2011
Disc.
October 24, 2011
Order
MC723LL/A
Model
A1286 (EMC 2353-1*)
Family
Early 2011 15"
ID
MacBookPro8,2
RAM
4 GB
VRAM
1 GB*
Storage
750 GB (5400 RPM)
Optical
8X DL "SuperDrive"
Ok so i got this laptop in a few days ago here are the problems and the things i have tried. This laptop when it came to me did not have a hard drive, so obviously no OS. Upon installing a hard drive then trying to load Yosemite from a USB stick, I turn mac on, sleep light will blink 5 times then boot, Will come to normal gray screen then apple logo, will then load the OS install, but go straight to a blue screen with vertical lines. Tried different hard drive, tried different RAM sizes and speeds, tried different OS, tried CD instead. Have done numerous PRAM and SMC resets. trying Safe mode gets me a panic cpu 4 caller error then restarts. I have tried using a hard drive that had an OS already installed and will go straight to blue screen after loading. I have tried fsck -fy in single user mode. I do get that disk2s3 is write protected in single user mode, but im pretty sure that its the OS disk. I do not see a second hard drive in single user mode but i believe that because its not partitioned yet. Any ideas community?

Tried doing OS X lion by CD now, and will only get half way through load bar before the apple logo and loading bar disappears and then it will sit at a gray screen.

Stuck on blue screen, after os x loads

Unable to get MacBook pro to move past blue screen after os x loading bar completes. Doing safe start gets me past login screen only to freeze on blue screen again. I've tried running applejack, I've tried re-starting holding down shift + ctrl + option and I've tried starting using command + d. All methods end with the same results, frozen blue screen. To make matters worse, the disc drive recently decided to crap out.

It's possible. You should make a good up to date backup before reinstalling the OS.
Do you have a friend with a Mac, and do you have an empty external hard drive? If so, you can mount your Mac's hard drive on your friend's desktop using FireWire target Disk Mode:
http://support.apple.com/kb/HT1661
You can also mount the external hard drive on your friend's Mac. Once that is done, you can use Super Duper or Carbon Copy Cloner to make an exact copy of your Mac's hard drive on the external, which will give you a good up to date backup. It should preserve everything on your hard drive including all the files.
I believe that you can use your friend's optical drive to install the OS on your boot drive, but I don't know in detail exactly how to do this.
Probably someone else on this thread could provide the details.
Good luck!

Blue screen after shutting down

Hello, I'm have this issue with my Toshiba satellite. When I go to shut it down it goes to a blue screen that's saying it has encountered a error and etc and then at the bottom it says dumping files etc and the the computer will reboot back to the start up screen. I have sent it in for repair and they replaced the mother board and when I got it back it works for a while then it goes back to the something. So I updated the windows and then I have it start not wanting to start up so I was told but a Toshiba tech to do a total reboot which I did. It started working without any problems until I update windows then it starts going back to the blue screen after shutdown. Any got any ideas on how to fix this ? thanks trey

hi.. i have also a problem about bluescreen problem.. it occurs while using the laptop. the laptop is a satellite A305-S6837. heres what its says..
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: a
BCP1: 0000096C0000007E
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF800026B1443
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\Mini020910-01.dmp
C:\Users\Owner\AppData\Local\Temp\WER-113662-0.sysdata.xml
C:\Users\Owner\AppData\Local\Temp\WER93E5.tmp.version.txt
and then when i used your bluescreenview, here what is says:
Mini020910-01.dmp
2/9/2010 5:39:13 PM
IRQL_NOT_LESS_OR_EQUAL
0x0000000a 0000096c`0000007e 00000000`00000002 00000000`00000001 fffff800`026b1443 ntoskrnl.exe ntoskrnl.exe+5a450 x64 C:\Windows\minidump\Mini020910-01.dmp 2 15 6002
and at the bottom part:
ntoskrnl.exe ntoskrnl.exe+5a1ee fffff800`0264d000 fffff800`02b65000 0x00518000 0x4a7801eb 8/4/2009 5:39:55 PM
please help me to configure the problem.. thank you

Blue screen after Error 37: a bad filename or volume was encountered

I get a PAGEFAULT_IN_NONPAGEDAREA blue screen after I encounter multiple Error 37: a bad filename or volume was encountered.
Anyone encounter this issue and how to you send info to apple for them to fix their buggy code?
Their support of code which will run bug-free on vista seems to be lacking (I understand there are two parties to this marriage).
Help anyone?

I noticed a few days ago that (at least on my box) Quicktime seems to have "issues" with >31 characters anywhere in the file path.
Is it possible that you have some folder along the way to your movie that has more than 31 charaters?
Shorten if necessary and see if that works.
dual 2.7 G5 Mac OS X (10.4.5)

My Macbook will not boot the operating system. It just goes to a blue screen after the apple logo and the spinning wheel goes off. I took the battery out and held the on/off button for five seconds and reset the PRAM. I have the old mac os disk.

My macbook will not boot. It goes to a blue screen after the logo and wheel goes off. I have taken the battery out and held the on/off button for five seconds and reset the PRAM. I have the the original os disk but have not put it in for fear of losing un backed op data.
Thanks
Rich

You won't lose any data unless you erase your hard drive.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c"key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it.When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've selected the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.

Blue screen after powering, scoped the forums, tried out all the suggestions, no luck

Really need your help guys!
Blue screen after powering
Imac alu, SL 10.6.8
Failed methods so far:
-repair disk permissions via external system or install DVD, no luck
-->message "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired."
i know that Apple says the message can be ignored
-unplugging the imac of every peripheral device as well as power cord,
holding down the power switch for 10 sec.
-doing p-ram reset
-booting in safe mode, blue screen-->loading circle+blue screen--> no loading circle + blue screen---> loop phenomen
Do have any other suggestions?
When booting from an external hard drive, the icon of the internal hard drive on the desktop has got a lock now. Do you know what to make of that?
Thanks,
G.

Nevermind! Used suggestion from an older post and it worked!

TS3274 My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persis

My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persists

Could you add your problem here: https://discussions.apple.com/thread/6569052? This makes sure the discussion and in one place and we can attract more attention from Apple.

Server 2012 R2 Hyper-V Cluster, VM blue screens after migration between nodes.

I currently have a two node Server 2012 R2 Hyper-v Cluster (fully patched) with a Windows Server 2012 R2 Iscsi target.
The VMs run fine all day long, but when I try to do a live/quick migration the VM blue screens after about 20 minutes. The blue reports back about a “Critical_Structure_Corruption”.
I’m being to think it might be down to CPU, as one system has an E-2640v2 and the other one has an E5-2670v3. Should I be able to migrate between these two systems with these type of CPU?
Tim

Sorry Tim, is that all 50 blue screen if live migrated?
Are they all on the latest integration services? Does a cluster validation complete successfully? Are the hosts patched to the same level?
The fact that if you power them off then migrate them and they boot fine, does point to a processor incompatibility and the memory BIN file is not accepted on the new host.
Bit of a long shot but the only other thing I can think of off the top of my head if the compatibility option is checked, is checking the location of the BIN file when the VM is running to make sure its in the same place as the VHD\VHDX in the
CSV storage where the VM is located and not on the local host somewhere like C:\program data\.... that is stopping it being migrated to the new host when the VM is live migrated.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Imac frozen at blue screen after i went into disk utilities and cleaned my free space. I tried holding down T key as it reboots and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen

Imac frozen at blue screen after i went into disk utilities and cleaned free space.
I tried holding down T key as it reboots
and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen?
to make matters worse we bought the IMAC of amazon uk on the 4/07/011 so what can we do?
please remember how frustrating it is when asking for help when the helper telling you to type something on the screen when its frozen
Tell us when you can type some instuctions to the software how do you get to the doss prompt so to speak to do this
Thanks

i tried all this thanks
i can not get past blue screen and message Your disk is full it needs to be emptied Please not I cant proceed past this message.
no matter what you tell me
Am i right ok in thinking that
when i went into disk utilities and chose to clean my free space i left it over one hour to do its stuff
i came back and there was no progress bar just the box so i quit the program and when i opened mac mail the system just froze i forced quit mail rebooted and blue screen death
Now when free space is being cleaned is it the same as windows dose the utility write lots of 0 on the hard drive then rebbot its self to free the space
basicly is my hard drive full of 00000 is this why im getting this message because the process was interupted
I need to know if i need outside help i bought the computer on line on amazon uk what dose one do next

Is anyone else experiencing their phone randomly locking up and going to a blue screen after the most recent update?

iPhone 5s Random Blue Screen after last Update

I have had 9 iOS devices either just show the apple log and go black or a dead battery even thou they were on the chargers for hours.
I brought them to the Apple store. No one could give me an answer as to why it did it. All you have to do to fix it is do this:
To put your device into recovery mode, follow these steps:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes.
Hold down the Home button on your device as you connect the USB cable. ...
When you see this screen, release the Home button.
From the consensus of the people in my office that did the iOS 8.3 update. The ones that did the update while the iPhone or iPad was on a charger are not experiancing any issues. The ones that did the update without being on a charger are the ones experianceing the issues at hand.

My laptop become blue screen after windows logo, after i update the graphic ati and intel driver

I have constant blue screen after windows logo and i have updated all drivers. i was upset the blue screen didn't go away and i did the factory reset. For my suprise, it didn't solve the problem and then i repair it at the comp shop. it was installed with windows 7 home premium 64 (pavilion g4 1006tx) bit as the pre installed windows and activated with the key back on sticker. I updated all drivers and i noticed every time i update the ati and intel driver it will go blue screen after windows logo. after i uninstall it at in safe mode it can load normally. My question is there any solution for my graphic card or is it already damaged? or any other hardware problem? please because i have to use high graphic as i use photoshop

hii
make sure you download and update correct driver version of graphic
and know spec
more:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g4-Notebook-PC-series/5046252/model/5068...
try to instal "AMD High-Definition Graphics Driver" only
and uninstal "Intel High-Definition (HD) Graphics Driver"
Wisnu Suryandi

Thinkpad X300 with windows xp sp2 gets blue screen after standby.

We have a Thinkpad X300 (with windows xp sp2) gets blue screen after standby. I mean after you close the lid then open it. Anyone has see this kind of behave before?
Thanks,

I have found the solution to this problem - hope you are still watching the thread.
Express install in parallels seems to be the culprit. Do a custom install instead and set your own virtual hard disk size. I set mine to 12 Gb (12000 Mb)and made it a fixed size instead of "growing" or whatever the heck parallels calls it. I also chose shared network instead of "bridged" (I read that someone else had identified this as part of the problem).
After making those changes it worked like a charm.

Satellite P30 - Blue screen after reinstall OS

Similar Messages

Maybe you are looking for