Satellite P300-01S: Second HDD cover will not fit back on

Hi,
I have a P300-01S (Canada). There is a second drive bay, including the sata/power connectors.
I've installed a second hard drive (64gb SSD), and it works just fine.
However, the cover for the drive bay will not fit back on. The cover has 5 pegs that prevent it from being put back on if a drive is in the bay. I believe the pegs are there to provide support to the cover when no drive is in there.
I see no way to remove these other then to snap them off. Any ideas?
These are not the normal tabs on the edges that are used to hold the cover in place, these are 1/2" long cylindrical pegs in the middle of the drive bay cover.

I would hav preferred not to cut anything either, but I couldn't find a part# online to order a cover without the pegs. I am sure there are some P300's (maybe Satelitte Pro P300's) out there that do list the 2nd drive bay as a feature, so they must have a cover without those pegs, but I couldn't find it.
It's working, pegs are cut off so the door fits on now. SSD is working well too.

Similar Messages

Satellite P300-20H - Second HDD caddy

Satellite P300-20H, PSPC8E
This laptop has a second HDD bay and a second drive works in the bay.
I have tried in vain to find a HDD caddie for the second HDD bay, can anyone point me in the right direction for the part number or a shop that sells them.
Thanks

I have upgraded brothers P300 with second HDD but I didnt use HDD bay. I have just fixed second HDD to stay in the same position with piece of plastic so that HDD will stay in place.
You can also contact Toshiba service and ask for help. I am pretty sure they have such HDD bays used before and can imagine you can get one.
Visit also eBay/notebooks and check for Toshiba hard drive caddy. I saw several bays there.

Satellite P300 - 01S or PSPCCC-01S01C CPU is underclocked with each Bios update

Why is Toshiba crippling the performance of the CPU ,FSB and Memmory speed with each bios update
when perchased bios version 1.60
*    internal clock speed 2001 MHz
update to Bios version 1.80
*   internal clock speed 1995 MHz
     crippled performance by .5 %
update to Bios version 2.50
*    internal clock speed 1993.4
     crippled performance by 1.95 %
*    other issues fan coming on more often
     intel wireless unstable
     etc
in this last Bios update 2.50 a noticable drop in performance under load
I paid for >>"Intel® Core™ 2 Duo Processor P7350 (2.0GHz 1066MHz FSB, L1 Cache 32KB/32KB, L2 Cache 3MB)" not a 1.9 Processor
>> YOU ARE CRIPPLING THE FSB AND MEMMORY TIMINGS AND UNDER CLOCKING MY LAPTOP <<
I would like it restored to its former advertised speed 2.0GHz
The reduced speed is noticable.
everyone should check for obvious reduced performance
Thank YOU
This is the make and model i perchased Model:     PSPCCC-01S01C - Satellite P300 - 01S
(Mercury Silver Top Cover - ATI Mobility Radeon HD 3650)
PS/AC Adaptor:     Model: PA-1121-04 Toshiba Part No: PA3290E-3AC3 (Input 100-240V~2.0A 50-60Hz, Output 19V 6.3A) Three Pins Plug Connector
FCC ID:     WiFi® CJ6UPA3655WL, Bluetooth™ RYYEYTFXCS (Sticker in the Battery Compartment)
IC:     WiFi® 248H-DPA3655W, Bluetooth™ 4389B-EYTFXCS (Sticker in the Battery Compartment)
Contains Radio Device:     WiFi® 512AN_MMW, Bluetooth™ EYTFXCS (Sticker in the Battery Compartment)
CMII ID:     Bluetooth™ 2007DJ1022 (Sticker in the Battery Compartment)
Environmental Credentials:     Energy Star 4.0 (Sticker on Upper Cover)
RoHS
Operating System:     Microsoft® Windows Vista™ Home Premium Edition SP1 64-bit Operating System
- Bilingual English or French Operating System

thank you for your repley
i am very much in favor of stability ,reliability and performance but the fact remains
that Toshiba Techs have made a conscious  and willfull decision to under clock the laptop and make no
mention that the bios updates may result in processing reduction, as for the call to tech support it was fruitless
because they are clueless as to why such things happen (Corporate Denial).
In Canada there were two very close speced laptops
one for 899.00 CAD with 1.9 GHz CPU
and the one I bought 2 months ago 1149.00 CAD 2.0 GHz
To me this looks like Toshiba overclocking the laptop to get out the retail door.
its not just affecting me, it affects everyone that buys a Toshiba laptop.
I will not back down on this point. The origional advertised and paid for specs, should
be restored in an upcoming bios update. If not, then it just confirms my original
findings.
This is refered to as "BAIT and SWITCH" and the practice is illegal in Canada.

My case cover will not

The case cover for my NOMAD Jukebox Zen XTRA will not fit on properly
I read the instructions and believe that it is on the proper way. The case cover fits securly over the bottom section, but not the top, and therefore from a side-view is slanted.
Any suggestions to fix this?They would be apperciated, thanks.

Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

The second Earphone jack will not work. My DV6000 is only one month old.

The second Earphone jack will not work, but I get static when I plug my earphones into it. The other jack works ok. I need help in fixing it. My DV6000 is only one month old.
This question was solved.
View Solution.

HI,
Robert96 wrote:
The second Earphone jack will not work, but I get static when I plug my earphones into it. The other jack works ok. I need help in fixing it. My DV6000 is only one month old.
One of the jacks is for audio in and the other is for audio out. Some select versions have an S/PD/F jack. Chances are the reason you are getting static is that if you plug an earphone into a microphone jack it will attempt to behave as a microphone. It will not operate properly.
So..a recap. There is only one earphone jack
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Am trying to insert new cartridge in Image Class D530. Toner cover will not close after insertion?.

I am trying to insert new toner cartridge in Image Class D530 laser printer. After insertion of cartridge, correctly I think, the toner cover will not close. What am I doing wrong?

Hi Sparrow.
What is the model number of the toner cartridge that you are experiencing issues with? The imageCLASS D530 supports the Canon Cartridge 128.
Please follow the instructions below to insert the toner cartridge. Ensure that both sides are level as you are inserting the cartridge in the machine:
1. Verify that the orange tabs and sealing tape have been removed.
2. Insert the toner cartridge.
Fit the protrusions (A) on each side of the toner cartridge into the guides located on each side of the machine. Slide the toner cartridge into the machine, until the toner cartridge meets the back of the machine.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HT200150 I pressed the find my iphone delete button and then my phone showed the apply logo. I then got worried and turned it straight off and now it will not turn back on. The apple logo just comes up for about 10 seconds and it goes back off.

I pressed the find my iphone delete button and then my phone showed the apply logo. I then got worried and turned it straight off and now it will not turn back on. The apple logo just comes up for about 10 seconds and it goes back off.

Connect your phone to itunes on the computer you use itunes on and open up itunes.

My iPod shut off randomly and will no longer turn back on. I plugged it in to charge it, but after several hours it will not turn back on. What should I do?

My iPod turn off randomly. I plugged it in to the charger, and after several hours, it still will not turn on. I even plugged it into my computer and pulled up iTunes, where it showed up on the screen as plugged in, but still it will not turn back on. Any suggestions on what I should do?

- First try resetting the iPOd:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears
- Next try restoring the iPod via iTunes, first from backup and if still problem to factory defaults/new iPod.

HT1386 some music will not sync back to ipod after restoring after update

i backed up my itunes library to disk prior to updating to OS6 now certain songs will not sync back to ipod even though they were purchased from itunes Help Please

If the non-syning ones play in iTunes on the coputer:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

T61 Cut off in middle of working and will not come back on

I have a T61p that was working fine, then just cut off. It was plugged into power outlet. It will not come back on, or display any lights. I have tried the 10 power button pushes, last for 30 secs several times now and it does not have an effect. I have pulled the drives out and the memory also.
Any other help?
Thanks!

So the power light is still there, but the laptop doesn't come on, does the HDD drive spin up when you press the power button?
Do you have warranty still? If not you can still get a post warranty warranty extension by calling lenovo, and get the laptop fixed.
Was your laptop overheating or doing weird stuff before this event occurred?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

HT4061 my phone turn off and i will not turn back on

my phones has been working fine all day but about 30 minutes ago it turn off and will not turn back on

See Here for > Frozen or unresponsive iPhone
Try this First... No Data will be Lost..
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

IPod will not turn BACK ON! Cold weather?

My iPod will not turn back on. I left it in a cold car for a few days while I was at my family's house, and the battery must have died while I was there. I came home and plugged it in, but it wouldn't charge or turn on. Help!!

Try sending it to the itunes store because when i left my ipod in a car for a few days it worked fine. if you haven't tried the 5 rs try those first.
To reset your iPod nano (2nd generation):
Reset
1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
2. Press and hold the Menu and Select buttons until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
Retry
Retry your iPod with a different USB or FireWire port on your computer (please note that the latest iPods can only be synced through USB).
Restart
Restart your computer, and make sure that you have the latest software updates installed.
Reinstall
To reinstall your iPod nano (2nd generation):
To update and reinstall your iPod software, first download the latest iTunes software.
Next, open the new version of iTunes and connect your iPod to your computer. iTunes will then automatically check to see if your iPod needs to be updated and perform the update for you.
To then check the software version on your iPod, select it from the source list in iTunes. iTunes will display the information about your iPod.
Restore
To restore your iPod nano (2nd generation):
Warning: Because Restore erases all of the songs and files on iPod, make sure to back up any files you've saved on the iPod disk. All of your songs, videos, podcasts, audiobooks, and games can be loaded back to your iPod provided that you have them stored in your iTunes Library. If you use the Nike + iPod Sport Kit, see this document for more information.
How to restore your iPod:
Make sure you've reinstalled the latest version of iTunes.
Open iTunes, and then connect your iPod to your computer.
After a few moments, it will appear in the Source list in iTunes.
Select your iPod in the Source list and you will see information about it appear in the Settings tab of the main iTunes windows.
Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with the latest iPod Software on your computer.
Restore Option 4: Restore and Update - Restores with the latest iPod Software on your computer.
A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
Mac Book Mac OS X (10.4.8)

My iPhone 4 shut off and will not come back on. How do I fix it?

My iPhone 4 has not had any problems before and all the sudden froze then the scream slowly started fading away into black. Amd now will not turn back on at all.

See Here for > Frozen or unresponsive iPhone
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
More Info here > https://discussions.apple.com/message/19521062

The iPhone I got yesterday turned off and will not turn back on.

The iPhone I got yesterday turned off and will not turn back on.

Is it charged? If so try a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset. If it's not charged, charge it via a wall socket for a least 30 minutes then try the reset again.

How to solve Audition CS6 error "The amount of audio to burn will not fit on the CD........."?

I have a brand new PC that is MORE than adequate. I have once succeeded in burning a CD after learning all about time tracks and merging them. (made a few with only ONE track)
Two things:
1) I find that I must add a CD marker at the end of the WAV because Audition CS6 erases whatever is the last CD marker I've made. Very frustrating but now I know I have to do this but I have no idea WHY!!
2) Right now I have a WAV that is just over 1 hour and 3 minutes with a total of 637.74MB of info. When I try to export/burn a CD, I get an error message stating "The amount of audio to burn will not fit.......". I am using TDK 700MB blanks with a Pioneer Blu-ray burner.
Obviously it will fit.
What am I doing wrong, all of a sudden?

Hey ryclark,
Thanks for responding. Something else is going on here.....
Here's what I re-replied to our friend...
Thanks for the response.
When I built this computer last Nov/Dec, it was built with the second
fastest Intel 7i, quad-core chipset on an 64-bit ASUS motherboard. It's running
Win 7 Pro. It has a 500GB SSD "C" drive with another 14 TB of true hard
drive space. It is set up with 64 bit. I had been using Audition CS3 for many
years and even go back to it's origin: Cool Edit and Cool Edit Pro. My
learning curve was minimal, sans the CD burning, which I used other software
for which is now antiquated, so I need Audition for this. Between this and
IZotope 3 I've repaired and improved many a recording. All-in-all extremely
useful software.
As for the idea "to burn it anyway", well the error message comes up and
that's it - if I "X" out of that message and try to burn again the message
comes back - so Audition will not let me. It is convinced that this file is
longer than it really is, but only when I add track marks to it!
There are only 11 tracks.
I was able to burn a CD of this same file but without all the track marks,
so the same exact file length/size will burn, only as the one track.
I've also succeeded in burning other WAV's , both greater and smaller, with
and without multiple track marks, without issue. Of course all with less
than the CD's max. capacity.
This problem seems to be with this one file. I've even re-made/re-recorded
the file from scratch with no change. There's something else going on here
that I can't put my finger on. (I am "recording" LP's and making personal
CDs of them)
Also, only from time to time, I have another error after burning a CD that
states it could not verify the CD. For this I assume it is the blank rather
than AA? The first might burn without issue and with the second burn I
get the error. It is near the end of a stack of blanks, so.....
As for the need to "mark the end" of the file makes a lot of sense but of
all the other CD track-marking software I've used, none needed one to do
this, but this IS Adobe after all.
You'd think there might be a smidge of intuitiveness with Adobe, but maybe
not.
- Mark
In a message dated 8/2/2014 8:11:52 A.M. Eastern Daylight Time,
[email protected] writes:
How to solve Audition CS6 error "The amount of audio to burn will not fit
on the CD........."?
created by ryclark (https://forums.adobe.com/people/ryclark) in
Audition CS5.5, CS6 & CC - View the full discussion
(https://forums.adobe.com/message/6605916#6605916)

Satellite P300-01S: Second HDD cover will not fit back on

Similar Messages

Maybe you are looking for