Satellite P300-156 - How can I clean it?

I won't clean my laptop inside, but I don't now what screws I must remowe.
If someone take the back cover from any P300 to cleaning the fans, maybe will send me any picture or instruction, what I must doing step by step.
Thanks very much.
PS:
sorry for english if is something wrong, then please correct this :)

Hi!
If you want to clean the fan you must disassemble the notebook. This is not necessary.
You can use compressed air spray. This could blow out the dust from the cooling ventilators.
Such compressed air spray you can get from a local computer dealer.
I hope this is useful for you.
Bye

Similar Messages

Satellite M50-156: How can I change resolution for my external monitor?

Hi,
I bought an exernal monitor for my laptop M50-156 which has a resolution of 1920x1080.
But the problem is that such a resolution is not available in the display settings of my computer!
I tried to update the graphic card and chipset, but the max resolution I have is 1280x1024!
So my external monitor cannot display properly :( Did anybody have the same problem?
Please help.. Thanks.
Beb

> But the problem is that such a resolution is not available in the display settings of my computer!
The resolution is not available and this says everything!!! Its not possible to choose this and you will have to use another resolution!
There are two reasons why your favorite external resolution is not available:
1) the graphic card chip does not support this
2) or the graphic card driver does not contain this resolution.
In your user manual you can find all supported and available external resolution
But I assume the 1920x1080 is not supported

Satellite P300 -156 Windows 7 Crash Problem

Hello,
I have the Toshiba Satellite P300-156 PSPC4E model, and i have had this laptop for a couple of years now.
Before installing windows 7 i had the default Windows Vista installed, and it worked fine.
Now since installing windows 7, ANY game i try and play just causes the laptop to just go black screen and shut down after about 5 - 10 minutes of playing.
I thought this was due to an overheating issue... so i opened the laptop and cleaned it all out, and then put it back together again.
(YES i have checked all wires are back in where they should be and all components are working properly)
This didn't work.
Then i tried updating all my drivers, and software ect.
Still nothing.
I've trawled through pages and pages of search results for the same problems with Windows 7 and game crashing... but nobody seems to know how to fix it.
I thought it was just windows 7, but i re installed windows vista and it's still doing the same thing on there now.
I've tried installing all the drivers from toshibas website for this model laptop and no luck.
My windows vista and windows 7 are both genuine copys.
All the hardware is working normally (as far as im aware) and i really can't see what can be causing this problem.
If anyone could give me some advice on what to do it would be greatly appreciated.
Thanks,

Hi
Which display driver you are using? Im not P300 owner but on my A300 I had a similar issue that the notebook crashed during playing a game. It seems that the reason was a 3rd party driver or lets say the driver from the graphic chip manufacture directly. I think because they are not pretested on the notebook and causing overheating
So I would recommend installing the latest display driver from the Toshiba website.
Last but not least which Windows 7 version (32 or 64bit) you have installed and which BIOS version?
The Toshiba website shows also new BIOS versions and different versions for 32bit and 64bit OS. Maybe you have to update/change it Who knows?!

Satellite P300-156: Vista wont start after installation of Toshiba Tempo

Hi
I have a new Satellite P300-156 which I have been using for about a month with no problems. It has been great.
This morning I had a message come up to install Toshiba Tempo which I did and all was fine until I restarted the laptop and now Vista wont start.
I have followed all the diagnostic tools, tried system restore etc... but still nothing.
I currently live in Italy, so is hard to take it into a computer repair shop as I dont speak Italian and the operating system is in english.
From what I can see my only option now is to do the TOSHIBA HDD Recovery, but I would loose some data which I have done since my last backup. Is there any way to backup data to a usb storage device using command promts before I do this, or is there a simpler way out of this?
Any advice would be great.
Thanks
Keith

Hi
Thanks for getting back so soon, however, F8 does nothing when starting. I have an option of F2 or F12, but neither gives me options to access last known good configuration.
Is that the same as a system restore from the Vista system recovery options as I have tried this (gives you a list of last known configurations). But still no luck.
If I do the TOSHIBA HDD Recovery function do I need a disc for this?
thanks

How can I clean up queue one-time on Sun Java system messaging 6.3

Hi,
<address>Our Email server have a problem, When I run _./imsimta qm directory tcp_local_, There are about 5 Millions of messages in the queue.</address>
Now our Email server send messages very slowly, how can I clean up queue one-time?
the command _./imsimta qclean_ is very slowly.
What can I do to prevent this problem?
our Email server version is :
Sun Java(tm) System Messaging Server 6.3-6.03 (built Mar 14 2008; 32bit)
libimta.so 6.3-6.03 (built 17:12:37, Mar 14 2008; 32bit)
SunOS email-1 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-V890
Thank you !

If you have more than 100,000 messages in the queue, then look at the MAX_MESSAGES parameter in [the job_controller.cnf file|http://wikis.sun.com/display/CommSuite/Job+Controller+Configuration+File]. If the parameter is not specified, it defaults to 100000. If you have more than that number of messages in the channel queues, it will take a long time for new/legitimate messages to be sent because job_controller is only considering the first 100,000 messages in the queue.
If you get into the "imsimta qm" command do do "sum -database", it will show a summary of what job_controller has in its internal cache and therefore what job_controller is working on. If you compare that to "sum -directory" you will probably see a difference.
If these are all legitimate messages, you need to increase MAX_MESSAGES, cnbuild, and restart job_controller.
If they are not, then preventing this in the future will require determining how they got into your queue and correcting that.
As for removing them, the "imsimta qm" commands allow you to select messages by various criteria and then you can "return" or "delete" them. But yes, that will take a long time if there are many messages because it is a single threaded process and it needs to open and examine each message. You may be able to accomplish the task more quickly with a shell script that works on individual channel queue subdirectories and then run multiple copies of that script in parallel. After you have cleaned out the queue, restart job_controller.
Also, you might want to consider [the subdirs channel keyword|http://msg.wikidoc.info/index.php/Subdirs_and_nosubdirs_Channel_Options].

My mac is running extremely slow lately how can i clean it

my mac is too slow lately how can i clean it

Yes. But what ever you do, don't buy any of the so called "cleanup" software. It is all worthless crapware.
Try http://www.thexlab.com/faqs/freeingspace.html
or http://www.thexlab.com/faqs/performance.html

I have duplicative song files in my library that are grayed out. This seems to cause a syncing problem to my ipod or iphone. How can I clean up this mess?

I chose to let iTunes rearrange my files and it appears to have duplicated them in my computer's drive. So now I have the same folders/files directly under my D drive (second computer hard drive) and also in the iTunes Music Folder that iTunes created. Wasn't sure what to do so I did another import and now I have files in my library that are grayed out with the small i symbol in the circle next to them. I also have the working (bolded) files too. How can I clean this up?

Musicman05 wrote:
Is there a way to override the 256kbps "conversion" when uploading to iCloud?
No. All music that is mirrored in the cloud will be AAC@256 Kbps.
Musicman05 wrote:
Along the same lines, if I "download" a song from my library to my iPhone, then plug my iPhone into my computer and sync the song file from my computer, will the higher quality original file overwrite the 256 one?
No, because with iTunes Match enabled on an iOS device traditional syncing of music via USB is disabled. All music management is done directly on the device.
Musicman05 wrote:
Also, if I want to syncronize another computer using iTunes match, how can I get the higher quality audio files? Will I simply have to transport all of them by an exernal hard drive or thumb drive?
You will first have to copy the high-quality audio files to the computer, add them to the iTunes library then enable iTunes Match.

How can I clean my Mac Book Pro completely to hand it over to an other user ?

How can I clean my Mac Book Pro completely to hand it over to an other user ?

Follow these directions:
http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/
Ciao,

How can I clean all the junk files from my iMac so that it can run faster?

How can I clean all the junk files from my iMac so that it can run faster? Its been slowing down ever since I started using it.

Before doing anything, we might be able to help with your iMac issues here.
Please download, install and run Etrecheck.
http://www.etresoft.com/etrecheck
Copy/paste its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software.

With journaling, I have found that my computer is saving a large amount of data, logs of all the changes I make to files; how can I clean up these logs?

With journaling, I have found that my computer is saving a large amount of data, logs of all the changes I make to files; how can I clean up these logs?
For example, in Notes, I have written three notes; however if I click on 'All On My Mac' on the side bar, I see about 10 different versions of each note I make, it saves a version every time I add or delete a sentence.
I also noticed, that when I write an email, Mail saves about 10 or more draft versions before the final is sent.
I understand that all this journaling provides a level of security, and prevents data lost; but I was wondering, is there a function to clean up journal logs once in a while?
Thanks
Roz

Are you using Microsoft word? Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users. I have seen this message from Microsoft word. It's annoying.
As BDaqua points out...
When you copy information via edit > copy, command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information. Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
You should be saving your work more than once a day. I'd save every 5 minutes. command + s does a save.
Robert

How can i clean up the "other" taking up space on my ipod touch?

How can i clean it up?

This is also where apps store their information on your ipod, along with emails. If you have a lot of emails on your ipod or some have large attachments, cleaning this up can also reduce the file size.

How can I store my video footage in one library? Currently I have video clips in itunes, iphoto, movies folder, imovie, imovieHD... probably some duplicates, How can I clean this up?

Currently I have video clips in itunes, iphoto, movies folder, imovie, imovieHD... probably some duplicates, How can I clean this up?

Yeah, this is frustrating for me, too. I tried a few different variants: keeping everything in Aperture, keeping only videos in iPhoto, keeping videos in Movies folder, etc. Reason being I'd like to be able to sync some videos back to the iPhone will keeping access available for iMovie - which is tougher than it should be. Now that the iPhone does HD videos, Apple needs to either adjust iPhoto to work with videos better or work with iMovie to actually function as a movie database as well as editor.
For now, I, too, have my stuff strewn about on my Mac but I'm trying to consolidate as much as I can into iMovie events on an external drive. I have a bunch of video clips of my 2 year old and I've decided to just group them by year and then put together an edit of each to then put into iTunes so I can view them on AppleTV as well as sync to my iPhone. I figure I won't ever sit down and watch every single clip so I might as well put together the "highlights".

Hi There! I have a question on Kernel Task-Threat. How can I clean my computer? This is the message --Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

Hi There! I have a question on Kernel Task-Threat. How can I clean my computer? This is the message that persists when cleaning disc--Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.

That's a routine message and it means nothing. Don't waste your time repairing permissions unless you know you have a problem that can be solved that way, which you probably never will.

How can I clean up fonts?

I recently purchased my first Mac 10.8. There are so many fonts. I know there are some that I need and that's indicated. But what about all the foreign fonts that they say are system fonts? How can I clean my fonts up and get rid of excess? Thanks

If you do not need all of the other OS X system languages and language fonts, you can try an app called
Monolingual.
This app can remove any languages and language fonts that you do not need or use.
You launch the app and check off the languages that you want the app to delete from your system.
You will find that it doesn't remove a lot of space, maybe between 1- 2 GBs of hard drive space.
https://www.macupdate.com/app/mac/7758/monolingual

How can I clean up old footage in FCPX?

How can I clean up old footage in FCPX? I have some older 4x3 TV analog video that has some pretty noticeable noise and fuzz in the image. Anyone know how I can clean them up a bit? Thanks!

FCP X doesn't ship with a noise reduction filter. You can experiment with selective blur effects and sharpening, but I would not be very optimistic about the results.
There are a number of plug-ins available. One that I think works well is Neat Denoiser. They have a trial version (with watermarked output) that you could download to see whether it will do what you want.
Good luck.
Russ

Satellite P300-156 - How can I clean it?

Similar Messages

Maybe you are looking for