Satellite P300-18M - AC adapter is dead

Cable melted today around the square plug that goes into laptop.
You can see the wires, lately adapter has been buzzing/making insect noises.
It's still under warranty.
Will Toshiba provide a replacement adapter and how long is it gonna take for me to receieve it as I can't use the laptop now but need it for work.
Thanks.

Hi
The AC adaptor is dead. This is fact and if the warranty is valid then the ASP should replace it for free.
You have to contact the guys in you country in order to get some more details and to arrange the part replacement.
Cheers

Similar Messages

Satellite P300-20H - AC adapter is dead

Hello
My ac adapter doe not seem to work..it does not get warm, it is not powering up my computer, which has run out of juice completely and now cannot be switched on. I had altered my power settings so that I would always have a fair amount of battery power left, but now nothing.
Do these ac adapters die? I have had it for around 3 years.
Do I have to buy another adapter? Can I fix this one?
Thanks in advance
Annie

You cannot fix it. Order new one. On AC adapter you will find sticker with part number (PAxxxxxx) so please order exact the same model. It must be 19V AC adapter.
You can also buy one on eBay. I found also one for my old Satellite P20 and it costs few euros only.

Satellite P300-18M - VGA to S-Video / RCA cable - No Picture on TV

Hi,
First of all, I am trying to use my other laptop (Dell Lattitude D630) I with my TV, however, this other laptop only has a VGA output.
So I bought a VGA to S-Video and RCA adapter from e-Bay: [Picture|http://members.lycos.co.uk/jtfearnley/Hosting/Images/RCA%20To%20S-Video%20RCA.jpg]
However, this does not work, the laptop in question does have "TV Out through VGA", so it should work according to various websites, and the seller....
However, I then tried to test it with my Satellite P300-18M, and it does not work with this either, I have tried both the composite (yellow port) and S-video port, in three different TV's, and there is no picture.
I have tried changing the settings in the ATI Catalyst Controll Centre, eg, forcing TV detection, and it detects the TV, however there is no picture on the TV, only grey lines.
If I cange the resoution and Refresh rate I can sort of get an image: [TV Picture|http://members.lycos.co.uk/jtfearnley/Hosting/Images/TV.jpg]
But this is the best thing.
In the past I have used all three television sets with my P300 using direct S-Video, so I do not understand why it will not work with this adapter.
Also, I know that this isn't a Dell forum, but I am not a member there, and this question is also concerning my Toshiba notebook, as it would be useful to be able to use the adapter for RCA instead of S-Video.
Thanks

Hi
From my knowledge the VGA port can be used only in connection with an external monitor/LCD but not with the TV.
The point is that the common PAL TV (not LCD or plasma) supports a max resolution of 720 X 576px at 50Hz (NTSC 720 X 480 at 60Hz).
As far as I know only the s-video port provides such resolution.
The VGA port provides higher resolutions which are supprted by most external monitors.
However, I never connected the notebook to TV via VGA port so I can provide only some assumptions.
Of course it could be possible that the VGA to S-Video and RCA adapter is not fully compatible.
I read on different pages that cheap no-name adapters dont work as it should.

Satellite P300-18M - Is using the card reader for Vista Ready Boost OK?

Hi there,
I have a P300-18M, and, due to getting a new phone, have an 8GB Micro SD Card spare.
I have put this in the card reader, and I am currently using it for Ready Boost, even though I have 3GB of RAM, there is definately a performance boost...
However, does anyone know if this could endanger the card reader? (ie damage it in any way) from being used all the time?
Thanks
Jack

Hmm. I wonder about the 8GB Micro SD Card.
As far as I know and according to some details in the internet, the Satellite P300 supports the microSD (with adapter) card 512MB - 4GB.
Usually the notebooks card reader should not recognize bigger microSD cards than 4GB.
Nevertheless I doubt it could affect the card reader functionality in worst case the 8GB microSD card will not be recognized by card reader
Cheers

Satellite P300-18M no wireless connection with Win XP Pro

Hello people!
I recently bought a P300-18M and installed WinXP Pro SP3 on it. Everything works fine except the wireless connection. It sais the switch for wireless connection is off, since it cannot find any networks, though the switch is on and the wireless LED is lighted up.
I've checked the FN+F8 hotkey, i've selected wireless only here...
I downloaded the most recent Intel 5400 drivers for the network card, but still it won't find any networks :(
Who can help me out?
Greets from holland, Leon

Hi
There is also a WLan switch at the notebooks side.
This switch must be enabled too.
Please check this!
Additionally you could check the WLan card properties in device manager.
There should be a tab called Advanced.
There are different settings which you should check. For example you can choose the different Wlan standards like 802.11 A B G etc

Slow boot up with Satellite P300-18M (PSPCCE)

This question has already partly been asked, however, I would like to ask everyone this question specifically:
Does anyone experience a slow boot up with the P300-18M ?
Please, even if your machine boots properly, I would be grateful for a reply, so that I can see if it is a problem with all of these machines, or if there is a problem with mine.
By booting slowly, I mean that:
After the vista 'Loading' screen, and 'Orb' appear:
http://vistasupport.mvps.org/images/install_vista/vista%202%20copy.jpg
http://www.windowsreinstall.com/winvista/images/Image57.gif
I get the screen below, for about 2 minutes:
http://farm4.static.flickr.com/3033/2853070854_91b4b7dcfa_b.jpg
I have tried disabling EVERYTHING from starting up at boot (using MSCONFIG)
Could people please share their experiences with the P300-18M
Thanks, Jack

Do you have a network attached? Perhaps DHCP is slowing the system?
Vista has a built in Boot logger in Event Viewer, which shows you a list of Events that took longer than normal.
Go to Control Panel -> Admin Tools -> Event Viewer
Then go to Applications and Services Logs -> Microsoft -> Windows -> Diagnostics-Performance -> Operational
Here are some screenshots
http://content.zdnet.com/2346-12354_22-64715-2.html

Satellite P300-18m - Recovery disk won't start up

Hi,
I did order the recovery disk, but it won't start up, so I still cannot erase my harddisk.
So far i have tried:
- starting and press f8
- starting and press c
- starting and press 0
I have already changed my boot order, but my laptop still won't start from CD. At the support page I have found many ways to fix it, but nothing works. It also seems like the cd/dvd isn't recognized.
Does anyone know what I can do now? Thanks for helping :)
Grtz Kim

Hey,
What notebook model you have exactly?
Normally you can start from Toshiba recovery disk if you enter the BIOS boot menu and select CD/DVD drive as boot device. Then press ENTER and the computer will boot from the disk. The key combinations that you mentioned like F8, c, etc. doesnt work, they are for HDD recovery.
> It also seems like the cd/dvd isn't recognized
Is the drive recognized in BIOS?

DVD ROM is not working on Satellite P300

Im running Vista Home premium and my DVD drive (TS-L633A) is not working on a Satellite P300-18M
when I check in device manager the dvd has a '!' next to it and a error message of 'Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)'
I have tried downloading the latest drivers from the toshiba site and reinstalling it but it still fails. I have removed it from device manager and restarted the laptop but still no joy.
Anyone have any ideas?
Message was edited by: stuckuser

Hey,
I agree what Horwath wrote. I had the same problem few days ago and so I removed the upper and lower filters in registry and restarted the computer. After this I was able again to use my CD/DVD drive :)
I hope it works for you too and any feedback would be nice!

Satellite P300-1A8 - Part number for AC adapter

Hi.
Can anyone tell me the Part Number of the AC adapter I need to buy for my Satellite P300-1A8?
Model no: PSPCOE-01H008EN 15550/1024/1024/160G54/17W + BT/D52/L/M/W
The toshiba site doesn't list or recognise the model, CarPhone Warehouse didn't provide me with detailed documents, and the original adapter has been stolen. Failing that, can anyone provide an email address for toshiba (I am unable to phone during their office hours).
Or failing that, some general advice on a compatible adapter please, as I bought an adapter of the correct basic specification - 19V, 3.95A, (75W), 2.5/5.5mm connector (the PA3715E-1ACE) however it doesn't work. The toshiba site lists one other adapter of the same specs (the PA3468E-1AC3) but I am reluctant to risk buying it without being sure it is the correct one. I would be happy to buy a universal adapter but only a high quality one that will not be an electrical hazard.
Thanks in advance for any help.
Clare

Hi PinkPanther.
Thanks for the reply and the link. That was the part of the site where I found the AC adapter I thought I needed. I could just go ahead and buy the other one, but these are 70 so I really need it to charge the laptop correctly at that price.
My main problem is that no site is recognizing my laptop model - not Toshiba or the authorized service provider - so I can't find out the exact charger online. The second problem is that I can't phone when their help line is open between 9-6pm M-F, as these are my exact work hours and I have no mobile phone reception.
I have messaged Toshiba though their site, but I haven't received a reply, and the advantage of an email address is that I can check that it has been delivered. I will try to search for the asp now.
And, as you say, the original AC adapter would be much better all round.
Thanks, Clare

Satellite P300-1AN - Touchpad issue with AC adapter

I've a Satellite P300-1AN notebook and since the beginning (two weeks)
I have a touchpad issue: it is not immediately responsive and the pointer trembles when touching the pad. Very often it freezes for just one or two seconds.
This is VERY annoying. A USB mouse works perfectly.
I tried reinstalling ALPS drivers, tried Synaptics ones, tried just Windows Vista drivers: no way.
Now I have found the reason: this issue is present only when the notebook is powered by AC adapter.
With battery the touchpad is perfect.
I contacted Toshiba Service and thay said that they won't change the AC adapter if I don't try before a complete system restore!
Isn't it simpler just try with a new adapter and only then, if the problem persists, try more drastic procedures?
Has anyone had this same issue?

> I contacted Toshiba Service and thay said that they won't change the AC adapter if I don't try before a complete system restore! Isn't it simpler just try with a new adapter and only then, if the problem persists, try more drastic procedures?
The point is that your notebook should be always checked using the Toshiba factory configuration.
Why? Because the ASP wants to be sure that this issue is not related to a software problem (compatibility issue with 3rd party applications). The software issues are not covered by warranty.
Furthermore the ASP will always recover the notebook before checking any hardware parts for a malfunction. Therefore you should always backup your data from the HDD before you will send the notebook for checking.
I would recommend to reinstall the OS using the Toshiba recover disk and then check if the issue would appears.
If yes then you can contact the ASP again and could provide all details which are necessary for an technician.
Bye

Satellite P300-150 - Need an AC adapter

Hi,
I have lost my AC Adapter to my Satellite P300 150 Laptop, so need to know the volt and Amp of a replacement.

Hi
The Satellite P300 150 seems to belong to the PSPC4E series and according to the Toshiba Options & Accessories page you could take these AC adaptors:
AC Adapter 19V, 3.42A, 65W - PA3516E-1AC3
AC Adapter 19V, 6.3A, 120W - PA3290E-3AC3
Best regards

Satellite P300 - Keyboard layout changed

Well, I am running a Toshiba Satellite P300 and I am having problem.
I just got it back from repair and they changed the motherboard. I have updated the BIOS. I did a fresh OS install to Windows 7 that. I didn't have this problem before it went out for repair but now when I press the Num Lock key, it changes my number pad to numbers, as expected, but also changes the right side of my keyboard to numbers as well which is very frustrating.
I have been surfing for 2 days online to find a solution to it and even called the tech that was in charge of the repair and no one has any answers for me.
And another problem after repair : without Model Name ,Part Nr and Serial Nr
[PC Information|http://forums.computers.toshiba-europe.com/forums/]
*Model Name* yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
*Part Number* yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
*Serial* Number None
OS Version Microsoft Windows 7 Ultimate 6.1.7600
BIOS Version V3.30
CPU AMD Turion(tm) X2 Dual-Core Mobile RM-70
Physical Memory 4096MB RAM
Hard Disk Capacity 449,892,560,896 [Byte|http://forums.computers.toshiba-europe.com/forums/] 418.995 [GB|http://forums.computers.toshiba-europe.com/forums/]
Hard Disk Free Space Capacity 147,790,635,008 [Byte|http://forums.computers.toshiba-europe.com/forums/] 137.641 [GB|http://forums.computers.toshiba-europe.com/forums/]
Video ATI Mobility Radeon HD 3650 version=8.634.1.0
Screen Resolution 1440 x 900 Pixels
Color Quality True Color (32 Bit)
Sound High Definition Audio Device version=6.1.7600.16385
High Definition Audio Device version=6.1.7600.16385
Network Atheros AR9281 Wireless Network Adapter version=8.0.0.325 MAC Address=00:21:63:61:13:EC
Modem HDAUDIO Soft Data Fax Modem with SmartCP version=7.68.0.50
Internet Explorer 8.0.7600.16385
IDE Device TOSHIBA MK2552GSX ATA Device
GDAN ENGD67O5IR85 SCSI CdRom Device FW version=3.5Z
HL-DT-ST DVDRAM GSA-T50N ATA Device FW version=RT03

So far it looks like W7 has the correct driver and the external keyboard has its key presses correctly processed.
Next?
When you press num lock on the external keyboard does it also toggle the alpha keys on the keyboard to numerics? - Trying to establish if the key code from the external k/b is the same as that generated by num lock on the laptop. Your laptop is behaving as if it is a laptop with no numeric key pad and you can toggle between "numbers or text". I've had a search and can find no "shortcut" keystrokes to do that - I also searched to see if a "Shift Lock" could be emulated since that is a key that has disappeared from modern keyboards.
I presume you have checked that your BIOS is the current version. The only other suggestion I've got is that the replacement m/b has not had Toshiba "lock outs" applied and it is in a generic bios state and you can access settings such as the number of keys on the keyboard or legacy keyboard support. Suggest you identify some "small" Toshiba laptops with no numeric keypad and download their manuals to see how they handle no numeric keypad or just ring Toshiba and ask them?
Message was edited by: peterk_1
With your laptop num lock on when you hold "Fn" and press one of the remapped keys do you get a letter? (add the shift key and get a capital) if so it's behaving like a Satellite L450D-11X (fn+f11 is the numeric toggle on that machine)

Satellite P300-13J - new accu is not detected

hello , my accu was dead , so i bought another accu ,and first one didn't work so i asked for another one , they send me another one but this one doesn't work too ..
when i restart my laptop , first of all it says , plugged in not charging after a minute of 2 it says no accu detected
can someone help me please
SATELLITE P300-13J
Tryed to download bios, and 30sc power button trick still nothing changes

> when i restart my laptop , first of all it says , plugged in not charging after a minute of 2 it says no accu detected
You should use the battery which was explicitly designed for this notebook model. Some retailers sells not genuine parts, also batteries and the mentioned problems can appear if you would use of not fully compatible battery pack.
At the other hand, if you purchased compatible battery, it may take some time to detect the empty battery. You should connect the AC adaptor and should charge the battery for a longer period of time.
If the battery would not be detected, even if the AC adaptor was connected for 2-4 hours, the battery should be replaced.

Satellite P300 - Touchpad freeze with AC adaptor

My english is not very good.
I can use the touchpad of my Satellite P300 only with battery. With the AC Adaptator, I have some freeze, and pointing is not possible

Hello
I'm coming back. I've bought another compatible AC Adaptator for Toshiba Satellite P300 (DLH STD-19063, 19V-6.3A).
The trouble is the same. Freeze is continuing when the AC Adaptator is plugged in.
The touchpad works good only when the AC DAdaptator is plugged off. I can work correctly only on battery.
I'm fed with this machine!!!! I'm going to send it to the Tohsiba SAV

Which Satellite P300 and P200 have a second HDD connector?

Hi.
Does anyone know which Satellite P200 and P300 laptops have 2 HDD connectors installed?
Thanks.

Hi CrazyHorse
You are right not all model which are equipped with two HDD bays support two HDD connectors.
But I found some P300 which support the second HDD:
Google is your friend :D
P300-10H
P300-10Y
P300-126
P300-128
P300-13E
P300-142
P300-14J
P300-150
P300-15D
P300-167
P300-174
P300-17C
P300-185
P300-186
P300-18B
P300-18M
P300-193
P300-19A
P300-19F
P300-19M
P300-19Y
P300-1A2
P300-1AH
P300-1AN
P300-1AO
P300-1BB
P300-1C8
P300-1C9
P300-1CE
P300-1D7
P300-1DM
P300-1E7
P300-1FM
P300-1GB
P300-1GH
P300-1GI
P300-1GO
P300-1GU
P300-1H0
P300-202
P300-206
P300-20R
P300-20W
Cheers

Satellite P300-18M - AC adapter is dead

Similar Messages

Maybe you are looking for