Satellite P300-190 - Cannot find the Stereo mix in sound settings

Hi,
maybe this question is posted before, but i can't seem to activate the stereo mix option in my sound settings.
It is simply not there.
Does anyone know how to solve this? Or isn't it possible.

Hi
As far as I know the Realtek sound chip supports StereoMix.
But if your notebook has been equipped with the Conexant sound chip then you would not find the StereoMix anywhere.
One of my notebooks supports Realtek sound chip and Vista is running there.
In control panel -> sound -> recording I clicked right and enabled the option called Show hidden devices and Show disabled devices.
Then StereoMix appeared in my sound settings.
But as said above, this is supported only by Realtek sound chip

Similar Messages

I CANNOT FIND THE OPTION "PROFILE" UNDER GENERAL SETTINGS IN MY IPHONE 4 VERSION 4.2.1

I CANNOT FIND THE OPTION "PROFILE" UNDER GENERAL SETTINGS IN MY IPHONE 4 VERSION 4.2.1

So, when in doubt, check out the manual (this one is for 4.2 and 4.3: http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf).
This is what I found under the General / Settings section. Not super helpful!
Profiles
This setting appears if you install one or more profiles
So I guess my question is, did you already set up the profile somewhere?? I searched through the manual and didn't see anything super helpful, but since you know specifically what you're looking for, maybe you'll find something I missed.

HT4623 I want to update my iOS software from version 4 to the latest available version, but I cannot find the software update tab in Settings- General. Pls help.

I want to update my iOS software from version 4 to the latest available version, but I cannot find the software update tab in Settings->General. Pls help.

http://support.apple.com/kb/ht4623
Sometimes older devices must be plugged into iTunes to update.
 Jackson

Satellite A65-S126: Cannot find the RTC battery

I have my machine turn down but cannot find the batteries to replace them. Based on Toshiba support the P/N are P000444350 but there is no such item in the case that I can see. Any ideas..?
Even the disassembly manuals online do not show them.
I know there must be something in here.
Also according to the operation manual these batteries take power from the main battery.
Since my main battery is completely dead, would this account for the time snyc issue I'm having with the RTC batteries; since they are not getting power to recharge??

Sorry for my misunderstanding but what battery do you mean exactly.
Do you mean the main battery or the tiny RTC battery which is fixed on the motherboard?!
> Also according to the operation manual these batteries take power from the main battery.
This is not exactly right.
The RTC battery provides power to the motherboard therewith the internal clock and the BIOS can run 24/7.
It does no matter if the main battery is empty. The RTC should provide the power to motherboard for several times also if the main battery is empty.
If the RTC battery is empty the motherboard cannot be provided with power and the internal clock, BIOS will be reset.
In such case you have to connect the main battery and the AC adaptor to the notebook and let the battery charge for about 12 hours.
For details please check the user manual -> battery chapter
best regards

Cannot find the QuickTime 7 Control Panel - settings

I cannot find the QuickTime 7 Control Panel. I have QT7 player on my laptop and am trying to enter registration code for QT Pro. I'm running windows vista.

If you're currently displaying your Control Panels in Category View, you'd need to change your view to "Large icons" or "Small icons" to see the QuickTime control panel.
Alternatively, launch the QuickTime Player and go "Edit > Preferences > QuickTime Preferences" to bring up the control panel.

Firefox installed version 5. I cannot find the place to change privacy settings. I have searched the Help and it does not show how to edit mine. I have Vista. I urgently need to enable cookies. Help

I have searched under the Firefox dropdown box and cannot find tools or privacy settings.

Click the Firefox button, click Options, click Options, from there, everything is the same as before (click Privacy and be sure first item "Firefox will:" is set to "Use custom setting for history" to see all of the settings on that panel).
You can still use/see the Menu Bar (''File, Edit, View, History, Bookmarks, Tools, Help'') if you prefer it:
*'''Temporarily display the Menu Bar''': press the ALT key for the F10 key and make your selections from the temporarily displayed Menu Bar
*'''Toggle between the Menu Bar and Firefox button'''. Do one of the following:
**NOTE:
***Menu Bar '''checked''' = Menu Bar on, Firefox button off
***Menu Bar '''un-checked''' = Menu Bar off, Firefox button on
**keyboard shortcut: HOLD the ALT key while pressing the letters VTM on your keyboard
**Using the Menu Bar: click View > Toolbars, click Menu Bar
**Using the Firefox Button: click Firefox Button > Options, click Menu Bar
**right-click on an empty space in one of the toolbars, click Menu Bar
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*Adobe PDF Plug-In For Firefox and Netscape
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.

Satellite P300-16N: No stereo mix for sound recording

Hello,
I'm french also excuse me for my english...school ^^
My problem is that:
I have a toshiba Satellite P300-16N and I will recording the sound of a music in internet starting from my PC...
But, I don't have the "stereo mix"...
I have a "conexant high definition audio smart221" and in the menu to notch: "to post the decontaminated peripherals" but nothing... :(
Help me please :(
http://images4.hiboox.com/images/3008/9849a2fadd2adf1f7cc2cba4c7e06e6c.jpg

Hmm maybe you should update the sound driver too
As I said in my first posting, I could enable the stereo mix on my Satellite. But there is one difference to the P300-16N; my notebook supports Realtek sound chip, your notebook supports Conexant CX20561 sound chip
Maybe this is the reasons why the stereo mix is not available.

Itunes only recognises various artists instead of th dj who mixed the cd and therefore cannot find the artwork. Is there any way to solve this problem?

itunes only recognises various artists and not the dj who mixed cd, and therefore cannot find the artwork as a result. Is there anyway to solve this as I have quite a few cd's with the same title in this series?

I'm happy to report that Sound Studio has corrected its part of the problem, and an updated version is available on its web site: freeverse.com/soundstudio/
I also discovered that attempts to adjust individual song volumes in the Get Info menu won't work if the Sound Check option is selected in Preferences (duh!).
Further good news is Apple's announcement of an arrangement to offer unprotected versions of BMI music in the iTunes store for an extra 30 cents per song. It would be well worth it, in my opinion, if all the music companies agreed to the arrangement, thereby streamlining the task of transferring problem songs to editing programs like Sound Studio.
One minor glitch remains. To differentiate between original and edited versions of a song, I usually append a number to the name. But when I import the edited version back into the iTunes library, iTunes automatically changes the name back to the original. I can tell the difference by referring to other clues in the library file, but not in the abbreviated iPod menu. I could delete the unedited version from the library or, better, create playlistys consisting of only the edited versions.
Thanks to all who contributed to this discussion. I hope others benefit from it as I did.
P.S.: I did download Max, which works fine for its intended purposes.

App-v 4.6: cannot find the file specified

Hi,
Please see my previous
post.
In short: an application needs Internet Explorer activex, then a plugin for Excel. My App-v package is working (Internet Explorer opening), but the Excel plugin does not work. It says "cannot find the file specified".
I copied the excel shortcut from start menu to q:\packagename.
Please advise.
J.
Jan Hoedt
In .osd file of Excel plugin, there is the following:
 <CODEBASE HREF="RTSP://%SFT_SOFTGRIDSERVER%:554/WindowsX64/Application/1.0/excelplugin.sft" GUID="9FA88591-089E-4E57-89D5-C23239E83238" PARAMETERS="" FILENAME="%CSIDL_PROGRAM_FILES%\Microsoft Office\Office12\EXCEL.EXE"
SYSGUARDFILE="applic.001\osguard.cp" SIZE="305879730"/>
 <WORKINGDIR>%CSIDL_PROGRAM_FILES%\Microsoft Office\Office12</WORKINGDIR>
The CSIDL_PROGRAM_FILES%, is that correct? If not, can I change it and how? Should I then reimport the package?
I might have found a solution but please advise:
http://blog.gridmetric.com/2011/09/26/possible-caveats-in-mixing-32-bit-and-64-bit-app-v-packages-and-environments/
Office is x86, so I probably should change the %CSIDL_Programfiles% to %programfiles(x86)%?

Changing CSIDL_PROGRAM_FILES to %programfiles(x86)% is worth a try.
A common reason for that 'cannot find the file..' error message also often can be resolved by removing the Workingdir entry (<WORKINGDIR></WORKINGDIR> or just <WORKINGDIR/>.
The way to apply the change depends on your deployment scenario. With an App-V Management Server (and for a test packae) you could modify (a copy of) the original .OSD file in the content share. Make sure you save with 'save as' and then 'Unicode'. Then
re-initiate a Server Refresh from the client, that should download the new OSD.
You also could - if it is permitted - create a copy of the client-local copy of the OSD file (you can figure that out with the Client Management Console). Double-Clicking that modified copy could do the trick.
If you use another deployment method (SCCM, MSI) you would need to moify the OSD file using the App-V Sequencer.
Whatever method you use during troubleshooting: For the 'final' pacage you should open the original package on the Sequencer ('Edit'), make the changes there and re-save + re-deploy the package. This makes sure that all information is consitent across the
various App-V files
Falko
Twitter
@kirk_tn | Blog
kirxblog | Web
kirx.org | Fireside
appvbook.com

The system cannot find the path specified - Problems

I am having an issue that I am hoping someone can help figure out for me.
I am currently learning Java, and am working with the Beginning Programming with Java for Dummies book second edition. I have downloaded and am running the Java 6 program and am using the JCreator 3.5Pro that was recommended to run the Practice files for the Dummies book.
I have the practice files here:
C/Program Files/Xinox Software/JCreatorV3/My Projects
While trying to compile one of the practice files, I get this error message:
--------------------Configuration: MyNewProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
javac: file not found: src_mynewproject.txt (The system cannot find the path specified)
Process completed.
**When I try to execute, I get this error message:**
--------------------Configuration: MyNewProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
java.lang.NoClassDefFoundError: EchoLine
Caused by: java.lang.ClassNotFoundException: EchoLine
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: EchoLine. Program will exit.
Exception in thread "main"
Process completed.
When I set up the new file, and the new class, I confirmed the file path.
I know most people will ask if I am absolutely certain I put in the code in properly, and yes I did. It was a matter of copying word for word, and punctuation. I did it 100% correctly. About 12 times. I have NO idea what this means, but I would REALLY REALLY appreciate any help on this.
Please keep in mind, I am slightly clueless, and really need to have any help dumbed down a bit. Lol.
As a side note, this isn't my first project, and I haven't had this problem before now.
thanks in advance. =)

So I wanted to clarify what I've done a bit more since I decided to redownload the dummies programs for the program and try again.
I will try to list my steps in order of what I did and see if I've gone wrong somewhere along the line.
I downloaded my project files from here: http://ca.dummies.com/store/product/Beginning-Programming-with-Java-For-Dummies-2nd-Edition.productCd-0764588745,navId-322469,descCd-DOWNLOAD.html
I unzipped them this time here: C:\Program Files\Java\jdk1.6.0_21\MyProjects\
I opened JCreator 3.5 and starting fresh, with all previous projects deleted and clicked on "Open Workspace". I chose "MyWorkspace.jcw". Right clicked MyWorkspace and chose "Add new Project" and then chose "Empty Project". As per the books instruction for the first project, I named it "MyFirstProject". My file path was: C:\Program Files\Java\jdk1.6.0_21\MyProjects\MyFirstProject. Which is where I upzipped the files. I added it to current workspace and clicked finish.
I then added a new class. As per the books instructions, I right clicked "MyFirstProject" and selected Add New Class. For the name, I used MyFirstJavaClass, which is what the book told me to do. My locations are the exact same as above. and I clicked on Generate new Method, as it told me to. Which it doesn't in the next few lessons, so I know this has nothing to do with it. For that and a few other reasons. Lol.
I clicked on Finish.
All I had to do was replace a single line of code. Not type it all in this time.
Here is what shows up on the screen:
class MyFirstJavaClass {
 * Method main
 * @param args
 public static void main(String[] args) {
 // TODO: Add your code here
I need to change the : // TODO: Add your code here
with the line:
System.out.println.("Chocolate, royalties, sleep");
When I do this, and compile project, I get this:
--------------------Configuration: MyFirstProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
javac: file not found: src_myfirstproject.txt (The system cannot find the path specified)
Process completed.
AGAIN! But it worked a few days ago.
And when I execute, I get this:
--------------------Configuration: MyFirstProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
java.lang.NoClassDefFoundError: MyFirstJavaClass
Caused by: java.lang.ClassNotFoundException: MyFirstJavaClass
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: MyFirstJavaClass. Program will exit.
Exception in thread "main"
Process completed.
I really hope the extra info helps someone help me!
thank you!
Edited by: MissPamela on Jul 19, 2010 3:23 PM

Cannot find the specified instance ???

"If the instance has recently been initiated, the invocation data may not have been delivered to the engine yet. Refresh your browser window or try again in a few seconds."
I am getting the above error when i try to execute a BPEL process that does some DML operation on the database.
I doubt whether this relates to the database.
Please suggest.
Thanks,
Rosh

Hi Marcelo!
I'm having the exact same problem. I've upgraded AS and BPEL PM from 10.1.3.1 to 10.1.3.3 As I found out in another thread (Cannot find the specified instance the problem could be in not running the upgrade sql script, but I did that.
When I initiate my process the number of Open Instances and closed instances remains 0. I've tried by deploying my process to default domain and a new domain I've created but it doesn't matter.
The message in my domain.log file is this:
<2008-01-22 13:52:32,976> <WARN> <MyTestDomain.collaxa.cube> <BaseCubeSessionBean::logWarning> Error while invoking bean "finder": [com.collaxa.cube.engine.core.InstanceNotFoundException: Instance not found in datasource.
The process domain was unable to fetch the instance with key "fa5790576a57cd77:-67b0033:117a188c804:-7fea" from the datasource.
Please check that the instance key "fa5790576a57cd77:-67b0033:117a188c804:-7fea" refers to a valid instance that has been started and not removed from the process domain.
ORABPEL-02152
Instance not found in datasource.
The process domain was unable to fetch the instance with key "fa5790576a57cd77:-67b0033:117a188c804:-7fea" from the datasource.
Please check that the instance key "fa5790576a57cd77:-67b0033:117a188c804:-7fea" refers to a valid instance that has been started and not removed from the process domain.
 at com.collaxa.cube.engine.data.AdminFinder.lookupInstanceByConversationId(AdminFinder.java:287)
 at com.collaxa.cube.ejb.impl.FinderBean.lookupInstanceByConversationId(FinderBean.java:200)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
 at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
 at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
 at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
 at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
 at com.evermind.server.ThreadState.runAs(ThreadState.java:646)
 at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
 at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
 at com.evermind.server.ejb.interceptor.system.TxNotSupportedInterceptor.invoke(TxNotSupportedInterceptor.java:43)
 at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
 at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
 at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
 at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
 at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
 at FinderBean_RemoteProxy_4bin6i8.lookupInstanceByConversationId(Unknown Source)
 at com.oracle.bpel.client.Locator.lookupInstance(Locator.java:448)
 at displayInstance.jspService(_displayInstance.java:123)
 at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
 at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
 at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
 at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
 at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
 at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
 at java.security.AccessController.doPrivileged(Native Method)
 at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
 at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
 at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
 at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
 at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
 at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
 at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
 at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:131)
 at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
 at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
 at java.security.AccessController.doPrivileged(Native Method)
 at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
 at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
 at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
 at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
 at java.lang.Thread.run(Thread.java:595)
I'd appreciate any suggestions on this.
Thanks!
BB

"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"

Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
Before the upgrade, offline files worked fine... how do I re-enable offline files?

I had a similar issue - couldn't make any files available offline.
I found that the offline folder service would not start
This was because the CSC permission were totally screwed. I had to take ownership of each folder and file, one by one, then grant everyone full access.
then delete the full contents of the CSC folder
format the CSC database using the registry fix then reboot
in control panel, disable the offline files, reboot, then re-enable. and now its working :)
2hrs to resolve this, with grateful thanks to this thread and some others.
damn windows8

Why does my itunes say it cannot find the disc burner or software when I'm trying to burn a CD?

Why does my itunes say it cannot find the disc burner or software when I'm trying to burn a CD? I've burned CD's before...even earlier today and all of a sudden it started saying that and wont burn my CD

Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
TOSHIBA Satellite C655
iTunes 11.0.0.163
QuickTime not available
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver 1.62.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00*****950
Current user is not an administrator.
The current local date and time is 2012-12-11 16:09:24.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.0.163 (x64) is currently running.
iTunesHelper 11.0.0.163 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
<Edited by Host>

In the new Pages 5.0, what is the page break shortcut key. I cannot find the key as indicated on the drop down menu.

in the new Pages 5.0, what is the page break shortcut key (it used to be the Fn + enter). I cannot find the (new) key as indicated on the drop down menu. Please help.

Hi Bruce and fruhulda,
ok, I found the keyboard viewer, it only shows the traditional symbol 'return'. something like a sideway u-turn continued with the arrow under. This is the Canadian or US keyboard.
btw thanks for your suggestion.

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)

Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
          •          Server name: imap.mail.me.com
          •          SSL Required: Yes
          •          Port: 993
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
SMTP (outgoing mail server) information:
          •          Server name: smtp.mail.me.com
          •          SSL Required: Yes
          •          Port: 587
          •          SMTP Authentication Required: Yes
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

Satellite P300-190 - Cannot find the Stereo mix in sound settings

Similar Messages

Maybe you are looking for