Satellite P300 19P - CD/DVD Burning Issue

Hi, I am new to the forum and hope that somone will be able to help.
I am having problems burning DVD's. When I use burning software the image is usually copied ok and then the burning process starts, which usually lasts a couple of moments and then the machine spits out the disc part burnt and wasted.
I usually use Corel DVD Copy 6, but have tried the TOSHIBA programmes and others such as NERO. Using Corel VideoStudio, this burns discs with a 90% sucess rate, but the problem comes when trying to copy my own created discs.
I have tried different Disc types (ie +R and -R), and I have tried burning speeds too.
Has anbody else suffered this problem?
I have managed to find an error code 06077-26-2A040902 , does this mean anyhting to anyone?
The TEMPRO Alerts seem to have provided firmware updates for a number of other DVD drives, but not the one in my machine? Perhpas it is due one? All the drivers are up to date.
Thanks for listening and anybodies help is more than welcome.
Cheers.

Hi, sorry it has taken so long to post a reply again - many apologies.
Thanks for you suggestion, which I have completed and tried. Although, this did help and I have managed to copy some discs with limited sucsess I am still having problems. I also made sure that the filters are still removed as mentioned.
I use Corel VideoStudio to create my discs, which seems to work fine. The initial burn is successful and will play in any DVD machine perfectly. Since this issue I have given up using Corel DVD Copy6 and reverted to using the Toshiba DVD Backup tool, but this only allows a single disc copy (can't produce multiple copies). This works with a very low success rate.
I have so far:
- Made sure lense and discs are clean.
- Tried different media (+R and -R)
- I use good quality discs.
- Tried the filter removing as mentioned.
Is there any other suggestions as to what I can do to resolve this issue?
Many thanks for your continued help.

Similar Messages

Satellite P300-19P: CD/DVD drive tries to read the disk then ejects

Hi,
I hope someone can help,
I have a *Satellite P300-19P*.
I have had this notebook 3 months and this is the latest frustrating problem; every now and again when I insert a DVD or CD and close the drawer the drive tries to read the disk and then ejects the disk, even if I take the disk out and shut the drive the drawer still ejects,
If I shut the system down and reboot the problem still exists.
I have checked the drivers which are up to date and the OS is Windows Vista home premium 32bit.
This is the fourth time this has happened and the problem seems to correct it's self and reappears as and when!!
Has anyone had this problem or can anyone help as this is driving me mad.

Hi!
I think thats a problem with the CD/DVD drive.
In your case I would go to an ASP (authorized service provider). They should check your notebook and change the drive if it is necessary.
Here you can search for an ASP:
http://eu.computers.toshiba-europe.com => Support & Downloads => Find an ASP
Bye

Satellite P300-1FN: CD/DVD drive issue - cannot read game DVD

Hi,
My brand new Satellite P300-1FN loaded some software ok using DVD drive but now when I put any disc in it doesn't auto run but the disc seems to run up and then a pop up window informs me after going Computer -> DVD drive to get access - Burn a Disc and wants to format.
The discs I am putting in are game DVD and other software to load but they all give the same pop up window.
DVD drive isTSST CDDVDW-TS-L633A
Can you help?

Enter Control panel > "Auto play" and define what should happen if you insert Software and games media.

Satellite P300-19P not able to capture audio using Chicony Cam software

Hey,
I recently upgraded to windows 7 from vista and since then i have not been able to capture audio with the camera assistant software.
I have tried uninstalling and reinstalling, repairing the program, changing the audio settings, running in compatibility mode, i have practically exhausted everything i can think of.
Can anybody help at all?
Marc
Toshiba Satellite P300-19P
Windows 7
32-bit OS
PSPCCE
(if any other info is required then please ask me)

Hi
You mean you are not able to record the audio using the internal microphone.
Is it right?
In your case I would recommend checking the audio device settings inside the camsoftware.
In settings -> audio tab (last tab) you will find the necessary settings.
The audio device field should contain the microphone (2 Realtek high definition device) and the audio volume option should be set to max (to right).

Satellite P300-19P won't display 1,440 x 900 in Win7 64bit.

Does anyone know why my Satellite P300-19P won't display 1,440 x 900 in win7 64bit.
It's highest display is 1360 x 768 which leaves a gap of about 1/2 inch at the top and bottom of my screen.
I had full res on XP but not on Win 7.
The drivers are up to date.
Anybody know why?

Im not quite sure about the difference between Vista and Win 7 ATI catalyst but it could be possible that some options are not present in different Catalyst options.
However, the available display resolution depends on the graphic driver.
I think the gap at the bottom and top o the screen appears due to 1360 x 768 resolution.
Its to small because the native resolution of this 17 TFT is 1440 x 900.
What happens if you would not install the ATI driver but would use the common Win 7 graphic card driver?
I installed Win 7 on my notebook and I didnt install graphic card driver because graphic chip was recognized automatically and all resolutions were available.
Check this.

Satellite P300-19P - Low battery notification sound

Does anyone know if there is a way of creating/turning on an audiable low battery notification? I can't find one.
Satellite P300-19p/vista

Hello
You can set a notification sound in the control panel => sounds and audio devices => Windows sounds.
There you can set a sound for low battery.
Greets

Can someone help me with a DVD burner issue on an HP Pavillion dv6700 series laptop?

Hello all. I have a HP Pavillion dv6700 laptop with a pioneer dvd rw k17b internal DVD burner drive. I recently have been experiencing issues with burning DVDs. It is saying that my burn speed is too low or the DVD is not compatible with the write speed of the burner and will not burn anything. I didn't have this problem until recently and it burned other DVDs fine until then. I have tried numerous brands of DVDs and none of them seem to work. I have also noticed that only the write speed of 2.4x shows in the drop down menu now...it had other options before. I have looked for firmware updates for the DVD burner and there isn't any. I have also checked device manager to make sure DMA was enabled and even tried uninstalling the driver and allowing windows to reinstall it upon reboot. I am running windows 7 operating system and have no clue what has happened to keep me from burning at a higher speed. I have also tried different burning software programs to see if I can get around it...no luck that way either. What has happened and how can I fix this? Any suggestions would be greatly appreciated! Thanks

Hello all. I have a HP Pavillion dv6700 laptop with a pioneer dvd rw k17b internal DVD burner drive. I recently have been experiencing issues with burning DVDs. It is saying that my burn speed is too low or the DVD is not compatible with the write speed of the burner and will not burn anything. I didn't have this problem until recently and it burned other DVDs fine until then. I have tried numerous brands of DVDs and none of them seem to work. I have also noticed that only the write speed of 2.4x shows in the drop down menu now...it had other options before. I have looked for firmware updates for the DVD burner and there isn't any. I have also checked device manager to make sure DMA was enabled and even tried uninstalling the driver and allowing windows to reinstall it upon reboot. I am running windows 7 operating system and have no clue what has happened to keep me from burning at a higher speed. I have also tried different burning software programs to see if I can get around it...no luck that way either. What has happened and how can I fix this? Any suggestions would be greatly appreciated! Thanks

Is there any work-around in Mavericks for DVD burning issue's

Ever since I installed the updated OX I get errors and problems burning disc's ( with my external Sony and OWC DVD burner's. Sometime's it freezes in the middle of burning and other times it hangs by the verification process. Even using Apple's own internal burner give's me these issue's. Even aborting the burn after it hangs is problematic. I usually have to turn off the burner and then on again and eject the disc . I use the latest version of Toast but have tried with Mac's own burning option. It makes no difference, both ways aren't working for me. In Bootcamp while trying to burn (on PC) side. The computer keeps crashing. I have had this experiance on my iMac and Mac Book Pro both early 2011.

Hi Pavan,
I am assuming you want to persist some intermediate values from a process XSLT invocation to another process XSLT invocation in BPEL.
An approach to persist variables in XSLT could be to persist them the target variable itself (in an optional section):
<li>This can be achieved by having an additional root element and mandatory element (say, data), having the actual schema and an optional complex type element (say, parameters, which would in turn consist of 2 elements name and value and maybe, if needed, type) attached to both the source and target schemas.
<li>whatever variable you would want to persist, you can append it in the XSLT to the target variable,as children of parameters node.
<li>Whenever, you want to invoke a partner link, you can have an assignment before invoking, which would assign the actual schema data (from element data) to the input variable of the invoke.
As there is no inbuilt solution for this, things could get messy.
Regards,
Shanmu.
Edited by: sthiagar on Feb 15, 2010 5:31 PM

Satellite P300-19P: Media Control buttons need to be pressed many times

Hi all, I'm a newbie to this forum, but I do love my Toshiba products!
I recently got a P300 19P and the touch sensitive media buttons at the top (mute, open media player, play/pause, stop, previous, next) buttons DO work, but only when i tap them something like 20 to 30 times repeatedly. Sometimes they work in just 5 or 6 taps, sometimes, it takes more like 50. What is going on here?
I would have thought it was something to do with windows media player having a lot of songs (only about a thousand to be honest), but that wouldn't explain the mute buttong being irresponsive.
(Windows Vista 32 bit home premium)
The LEDs all work fine though.... :-(

I will do that just now. Although at first, the first button on the far left was for muting the sound.
When the buttons were fully functional when I first bought it, it was a mute button. It has suddenly changed its function now. Is there any way of configuring the function of those buttons?
And I do touch them gently.
I just went into C:\Toshiba\Drivers\ValueAddedPackage and opened a file called ButtonSetting. I found this. (Note, I have not edited the text at all, and will not do so either unless advised otherwise).
+[Version]+
+Version =+
+[Button1]+
+ID = 1+
+Function = Dimmer+
+[Button2]+
+ID = 2+
+Function = CDDVD+
+[Button3]+
+ID =+
+Function =+
+[Button4]+
+ID =+
+Function =+
+[Button5]+
+ID =+
+Function =+
+[Button6]+
+ID =+
+Function =+
+[Button7]+
+ID =+
+Function =+
+[CD]+
+OPT1 = wmplayer.exe+
+OPT2 = /Device:AudioCD+
+[DVD]+
+OPT1 = TosDVD.exe+
+OPT2 =+
+DVDMENU =+
+[HDDVD]+
+OPT1 = TosDVD.exe+
+OPT2 =+
+[NOMEDIA]+
+OPT1 = wmplayer.exe+
+OPT2 = /Task Media Library+
+[TV]+
+OPT1 =+
+OPT2 =+
+REC =+
Message was edited by: EmperorK

Satellite A60: firmware for DVD burner TEAC DV-W24e needed !

Hi guys,
I have a problem with DVD burner TEAC DV-W24e. It has been some time that it is no more able to write any DVD or CD. Today, I checked the firmware and saw that the version is not the good one at all. Could anybody tell me where I could get the last firmware for that DVD burner or could anyone send it to me by e-mail ! It would be great !!!!
Thanks to all and season's greetings.
Ben

I found a firmware update on the Toshiba page in the Satellite A60 area but its only for these drives:
- SD-R2212
- SD-R1312
- SD-R1512
- SD-R2412
- SD-R6112
- SD-R2512
I think you have to Google or to ask the drive manufacture for the right firmware
Nice page:
http://www.tdk-europe.com/en/product_extras/dvdrw_compatibility.php?lang=en

Dual Layer DVD Burner Issues

Hello every one. I recently purchased a Sony DRX-810UL/T External DVD burner and am having a few issues with it. I have it connected through firewire to my mac mini runing the latest version of panther. It works well with Toast lite which shipped in the box, however if toast isn't launched, and I insert a dvd into the drive, I get the usual prompt asking me if I want to ignore, eject, or burn the disc. Regardless of which option I choose the disc ejects and i get an error message (0x80020025) telling me the drive is not supported. I posted a message on the maccast forums and was told that it was an issue with panther that it had trouble with dual layer burners. I also read one article that said relaunch the finder would fix this problem however that did not work. I am wondering if anyone else has experiences the same or similiar issues using a dual layer burner in panther. Just to clarify i am not trying it with a dual layer disc, it is a single layer dvd.
Any help that can be offered would be greatly appreciated.
-Matt

Hi Matthew
I have a Dual Layer burner(internal) on my Mac running Panther 10.3.9 plus another burner and when I connected them,I had the same problem.Then,I installed an app called"Patchburn"(it's freeware)and since then,no problems,it recognizes both burners
Mario

DVD burn issue

I have Premiere Elements 13 and up till now have had no problem burning DVDs. Now it says the DVD burn is interrupted and advises me to use the ISO image instead.

donm
Thanks for the update.
As for the save location of the iso from the failed burn to disc,
a. look at typically default location - if you have not already...
Libraries
Documents
or
Libraries
Documents
Adobe
Premiere Elements
13.0
and in the 13.0 Folder look for the .iso file included with the folders and project.file
There is the likelihood that the .iso was not really produced. That typically results is the preference Intel HD Graphics 2000 or Higher is not set right, either disabled when it should be enabled or enabled when it should be disabled.
Open the project to the Expert workspace and expand the Timeline using the -+ slider above the Timeline - opened all tracks which are used or unused and look for
a. leftovers - whole clips or fragments of clips (could be seen as thin vertical black lines scattered among the track content)
b. gaps
c. title and transition placement
d. placement of those Timeline menu markers if you left them when you did the with and without menus
What were the properties of those last 3 scenes that you deleted and ended with successful burn to disc?
Let us review the above.
Thank you.
ATR

Satellite P300-19P - How to change from NTSC to PAL?

Everytime I want to display on my TV I have to change the TV from PAL to NTSC as I can't find how to change the S-Video output on the laptop from NTSC to PAL.
Does anyone know how to?
Cheers.

Hey,
Im not owner of Satellite P300 but either you can change this option in BIOS or in display driver. Normally there you have an option to change between PAL and NTSC on S-Video output.
Check this!!!

CD/DVD Burning issues

Hi all....My system is almost a year old now and I love it...it runs great in almost every situation.
I am however having a strange problem and was wondering if you guys here might have seen it before...i
Sometimes when I try to run a CD/DVD burn process windows just shuts down.
It actually goes throught the entire shutdown process....it does not crash.
It happens randomly with both of my burners ....only sometimes when I use NERO 6
and almost always when I try to use CloneCD.
any suggestions?
Thank you in advance!!

Hi
Here are the PSU stats for my system
Model# W0014 (BLACK)
Item # N82E16817153007
Specifications:
Type: ATX
Maximum Power: 480W
PFC: No
Power Good Signal: 100-500ms
Hold-up Time: >16ms at Full Load
Efficiency: >65%
Over Voltage Protection: +5V trip pointOverload Protection: Not specified
Input Voltage: 100-240 Vrms
Input Frequency Range: 47Hz-63Hz
Input Current: 8A
Output: +3.3V@30A;+5V@40A;[email protected];+12V@18A;[email protected];+5VSB@2A
MTBF: Not specified
Think this has something to do with it?
Thankx
einsteins

Satellite M45-S355 and DVD Burning

I have a Satellite M45-S355 laptop and have never tried to burn DVDs until now. I know it has a Mat****a UJ-831s driver/burner.
I am not able to find any DVDs under 16x for their speed. How do I burn onto these types of DVDs?
When I even try to format a disc, etc, the computer says that CD/DVD-R are not supported by this version of DLA.
Any help would be great!

Hi
If you want to burn data on the DVD then I would recommend using an 3rd party software like Nero burning ROM
I use Nero and Im satisfied.
Furthermore I recommend checking the registry and to remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Last but not least you can use DVDs which can be burned with higher speed but I recommend burning the DVDs with the lowest speed I do it with 1x speed.
Cheers

Satellite P300 19P - CD/DVD Burning Issue

Similar Messages

Maybe you are looking for