Satellite P300-19P not able to capture audio using Chicony Cam software

Hey,
I recently upgraded to windows 7 from vista and since then i have not been able to capture audio with the camera assistant software.
I have tried uninstalling and reinstalling, repairing the program, changing the audio settings, running in compatibility mode, i have practically exhausted everything i can think of.
Can anybody help at all?
Marc
Toshiba Satellite P300-19P
Windows 7
32-bit OS
PSPCCE
(if any other info is required then please ask me)

Hi
You mean you are not able to record the audio using the internal microphone.
Is it right?
In your case I would recommend checking the audio device settings inside the camsoftware.
In settings -> audio tab (last tab) you will find the necessary settings.
The audio device field should contain the microphone (2 Realtek high definition device) and the audio volume option should be set to max (to right).

Similar Messages

Satellite P300-19P won't display 1,440 x 900 in Win7 64bit.

Does anyone know why my Satellite P300-19P won't display 1,440 x 900 in win7 64bit.
It's highest display is 1360 x 768 which leaves a gap of about 1/2 inch at the top and bottom of my screen.
I had full res on XP but not on Win 7.
The drivers are up to date.
Anybody know why?

Im not quite sure about the difference between Vista and Win 7 ATI catalyst but it could be possible that some options are not present in different Catalyst options.
However, the available display resolution depends on the graphic driver.
I think the gap at the bottom and top o the screen appears due to 1360 x 768 resolution.
Its to small because the native resolution of this 17 TFT is 1440 x 900.
What happens if you would not install the ATI driver but would use the common Win 7 graphic card driver?
I installed Win 7 on my notebook and I didnt install graphic card driver because graphic chip was recognized automatically and all resolutions were available.
Check this.

Satellite P300-19P - Low battery notification sound

Does anyone know if there is a way of creating/turning on an audiable low battery notification? I can't find one.
Satellite P300-19p/vista

Hello
You can set a notification sound in the control panel => sounds and audio devices => Windows sounds.
There you can set a sound for low battery.
Greets

Not able to capture button event in extended controller

Hi Gurus,
I am not able to capture the button event (of seeded controller) in extended controller.
I have written code in extended controller like below:
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean){
    String str = pageContext.getParameter("event"); // copied from seeded controller for the button event //
      if ("editLines".equals(str)) {
        //cutom validation
super.processFormRequest(pageContext, webBean);
Please help me in resolving the issue.
Thanks,
Srinivas
    ///my cutom validateion

Hi Bm,
Thanks for your response.
I have tried the same but no luck.
Please help in getting this resolved.
Thanks,
Srinivas

Not able to capture button event in pageLayout Controller

Hi Guys,
I have the following layout
pageLayout ------------------------ pageLayoutCO (controller)
----messageComponentLayout (Region)
----------messageComponentText (item)
----------messageComponentText (item)
----------messageComponentText (item)
----------messageLayout (Region)
----------------header(Region)
----------------------button (item) (say BTN1) (fires partial action)
I am not able to capture the event fired by the button BTN1 in the controller of the pagelayout..... but if i set a controller at the messageComponentLayout iam able to capture the event.
what should i do in order to capture the button event in the pageLayout Controller
Thanks in advance
Tom.

Tom,
Two things:
1)The button ur using is of type submitbutton or button?.In this scenario it should be button.
2)The correct coding practice is using:
if("QUERY".equals(pageContext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
instead of
String _event = pageContext.getParameter("event");
if("QUERY".equals(_event))
because you never know if Oracle in any upgrade or patch change the value of the constant EVENT_PARAM in class OAWebBeanConstants.
3)If first point is followed by you, just match the exact event name in code and in property inspector for the button.
--Mukul
--Mukul

HT201401 iphone 5 not able to hear audio through receiver jack. have cleaned it as well as restarted it. no issue. feeling depressed :(

iphone 5 not able to hear audio through receiver jack. have cleaned it as well as restarted it. no issue. feeling depressed

- You are doing a double upmix/downmix. For me, I tried playing a movie I bought from ITUNES. It was 00% 5. sound but I, like you, only heard 4 channels. Then I realized that on my Logitech analog speakers that I had pressed the "matrix" button which is meant to physically take stereo and put it through all fi've speakers. So VLC was playing the file just fine but my speakers were taking the fi've to one sound and making it stereo.

HT2729 I'm not able copy an audio file (mp3) of size 18,890KB to my Iphone that has the latest OS - iOS5.1.1. Is there a limit on the audio file size ?

I'm not able copy an audio file (mp3) of size 18,890KB to my Iphone that has the latest OS - iOS5.1.1. Is there a limit on the audio file size ? I was able to play the same song on iTunes but not able load it into my iphone. .. Any suggestions ?

I'm not able copy an audio file (mp3) of size 18,890KB to my Iphone that has the latest OS - iOS5.1.1. Is there a limit on the audio file size ? I was able to play the same song on iTunes but not able load it into my iphone. .. Any suggestions ?

Satellite P300-19P: CD/DVD drive tries to read the disk then ejects

Hi,
I hope someone can help,
I have a *Satellite P300-19P*.
I have had this notebook 3 months and this is the latest frustrating problem; every now and again when I insert a DVD or CD and close the drawer the drive tries to read the disk and then ejects the disk, even if I take the disk out and shut the drive the drawer still ejects,
If I shut the system down and reboot the problem still exists.
I have checked the drivers which are up to date and the OS is Windows Vista home premium 32bit.
This is the fourth time this has happened and the problem seems to correct it's self and reappears as and when!!
Has anyone had this problem or can anyone help as this is driving me mad.

Hi!
I think thats a problem with the CD/DVD drive.
In your case I would go to an ASP (authorized service provider). They should check your notebook and change the drive if it is necessary.
Here you can search for an ASP:
http://eu.computers.toshiba-europe.com => Support & Downloads => Find an ASP
Bye

Satellite P300 starts not immediately

Hello,
my Satellite P300 starts not immediately. I have to push the start button ca. 20 or 30 times.
Any results?

Hello
I have Satellite Pro P300 in front of me. I use it almost 4 weeks now and I press the start button very gently and keep it down for second or two and notebook start properly every time I want to start it.
Do not press the button quickly several times but gently and keep it down for second or two.

Not able to run validation using validation.xml & validator-rules.xml

Hello Friends,
I am not able to run validation using validation.xml & validator-rules.xml.
Entire code in running prefectly but no error messages are prompted.
Following is my code:
File Name : struts-config.xml
<struts-config>

<form-beans>
<form-bean name="searchForm"
type="com.solversa.SearchForm"/>
</form-beans>

<global-forwards>
<forward name="search" path="/search.jsp"/>
</global-forwards>

<action-mappings>
<action path="/search"
type="com.solversa.SearchAction"
name="searchForm"
scope="request"
validate="true"
input="/search.jsp">
</action>
</action-mappings>

<message-resources
parameter="ApplicationResources"/>

<plug-in className="org.apache.struts.validator.ValidatorPlugIn">
<set-property property="pathnames"
value="/WEB-INF/validator-rules.xml,
/WEB-INF/validation.xml"/>
</plug-in>
</struts-config>
<br> File Name : <b> validation.xml </b>
<form-validation>
<formset>
<form name="searchForm">
<field property="name" depends="minlength">
<arg key="label.search.name" position = "0"/>
<arg1 name="minlength" key="${var:minlength}" resource="false"/>
<var>
<var-name>minlength</var-name>
<var-value>5</var-value>
</var>
</field>
<field property="ssNum" depends="mask">
<arg0 key="label.search.ssNum"/>
<var>
<var-name>mask</var-name>
<var-value>^\d{3}-\d{2}-\d{4}$</var-value>
</var>
</field>
</form>
</formset>
</form-validation>
<br> File Name : <b> SearchForm.java </b>
package com.jamesholmes.minihr;
import java.util.List;
import org.apache.struts.validator.ValidatorForm;
public class SearchForm extends ValidatorForm
private String name = null;
private String ssNum = null;
private List results = null;
public void setName(String name) {
this.name = name;
public String getName() {
return name;
public void setSsNum(String ssNum) {
this.ssNum = ssNum;
public String getSsNum() {
return ssNum;
public void setResults(List results) {
this.results = results;
public List getResults() {
return results;
<br> File Name : <b> SearchAction.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.struts.action.Action;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
public final class SearchAction extends Action
public ActionForward execute(ActionMapping mapping,
ActionForm form,
HttpServletRequest request,
HttpServletResponse response)
throws Exception
EmployeeSearchService service = new EmployeeSearchService();
ArrayList results;
SearchForm searchForm = (SearchForm) form;
// Perform employee search based on what criteria was entered.
String name = searchForm.getName();
if (name != null && name.trim().length() > 0) {
results = service.searchByName(name);
} else {
results = service.searchBySsNum(searchForm.getSsNum().trim());
// Place search results in SearchForm for access by JSP.
searchForm.setResults(results);
// Forward control to this Action's input page.
return mapping.getInputForward();
<br> File Name : <b> EmployeeSearchService.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
public class EmployeeSearchService
/* Hard-coded sample data. Normally this would come from a real data
source such as a database. */
private static Employee[] employees =
new Employee("Bob Davidson", "123-45-6789"),
new Employee("Mary Williams", "987-65-4321"),
new Employee("Jim Smith", "111-11-1111"),
new Employee("Beverly Harris", "222-22-2222"),
new Employee("Thomas Frank", "333-33-3333"),
new Employee("Jim Davidson", "444-44-4444")
// Search for employees by name.
public ArrayList searchByName(String name) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if (employees.getName().toUpperCase().indexOf(name.toUpperCase()) != -1) {
resultList.add(employees[i]);
return resultList;
// Search for employee by social security number.
public ArrayList searchBySsNum(String ssNum) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if (employees[i].getSsNum().equals(ssNum)) {
resultList.add(employees[i]);
return resultList;
<br> File Name : <b> Employee.java </b>
package com.solversa;
public class Employee
     private String name;
     private String ssNum;
     public Employee(String name, String ssNum) {
     this.name = name;
     this.ssNum = ssNum;
     public void setName(String name) {
     this.name = name;
     public String getName() {
     return name;
     public void setSsNum(String ssNum) {
     this.ssNum = ssNum;
     public String getSsNum() {
     return ssNum;
Pls help me out.
Not able to prompt errors.

Hello Friends,
I am not able to run validation using
validation.xml & validator-rules.xml.
Entire code in running prefectly but no error
messages are prompted.
Following is my code:
File Name : struts-config.xml
<struts-config>

<form-beans>
<form-bean name="searchForm"
type="com.solversa.SearchForm"/>
ans>

<global-forwards>
<forward name="search" path="/search.jsp"/>
global-forwards>

<action-mappings>
<action path="/search"
type="com.solversa.SearchAction"
name="searchForm"
scope="request"
validate="true"
input="/search.jsp">
tion>
</action-mappings>

<message-resources
parameter="ApplicationResources"/>

<plug-in
className="org.apache.struts.validator.ValidatorPlugI
">
<set-property property="pathnames"
value="/WEB-INF/validator-rules.xml,
/WEB-INF/validation.xml"/>
>
</struts-config>
<br> File Name : <b> validation.xml </b>
<form-validation>
<formset>
<form name="searchForm">
<field property="name" depends="minlength">
<arg key="label.search.name" position = "0"/>
<arg1 name="minlength" key="${var:minlength}"
resource="false"/>
<var>
<var-name>minlength</var-name>
<var-value>5</var-value>
</var>
</field>
<field property="ssNum" depends="mask">
<arg0 key="label.search.ssNum"/>
<var>
<var-name>mask</var-name>
<var-value>^\d{3}-\d{2}-\d{4}$</var-value>
</var>
</field>
/form>
</formset>
form-validation>
<br> File Name : <b> SearchForm.java </b>
package com.jamesholmes.minihr;
import java.util.List;
import org.apache.struts.validator.ValidatorForm;
public class SearchForm extends ValidatorForm
private String name = null;
private String ssNum = null;
private List results = null;
public void setName(String name) {
this.name = name;
public String getName() {
return name;
public void setSsNum(String ssNum) {
this.ssNum = ssNum;
public String getSsNum() {
return ssNum;
public void setResults(List results) {
this.results = results;
public List getResults() {
return results;
<br> File Name : <b> SearchAction.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.struts.action.Action;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
public final class SearchAction extends Action
public ActionForward execute(ActionMapping
mapping,
ActionForm form,
HttpServletRequest request,
HttpServletResponse response)
throws Exception
EmployeeSearchService service = new
EmployeeSearchService();
ArrayList results;
SearchForm searchForm = (SearchForm) form;
// Perform employee search based on what criteria
was entered.
String name = searchForm.getName();
if (name != null && name.trim().length() > 0) {
results = service.searchByName(name);
else {
results =
service.searchBySsNum(searchForm.getSsNum().trim());
// Place search results in SearchForm for access
by JSP.
searchForm.setResults(results);
// Forward control to this Action's input page.
return mapping.getInputForward();
<br> File Name : <b> EmployeeSearchService.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
public class EmployeeSearchService
/* Hard-coded sample data. Normally this would come
from a real data
source such as a database. */
ivate static Employee[] employees =
new Employee("Bob Davidson", "123-45-6789"),
new Employee("Mary Williams", "987-65-4321"),
new Employee("Jim Smith", "111-11-1111"),
new Employee("Beverly Harris", "222-22-2222"),
new Employee("Thomas Frank", "333-33-3333"),
new Employee("Jim Davidson", "444-44-4444")
// Search for employees by name.
public ArrayList searchByName(String name) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if
(employees.getName().toUpperCase().indexOf(name.toU
pperCase()) != -1) {
resultList.add(employees[i]);
return resultList;
// Search for employee by social security number.
public ArrayList searchBySsNum(String ssNum) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if (employees[i].getSsNum().equals(ssNum)) {
resultList.add(employees[i]);
return resultList;
<br> File Name : <b> Employee.java </b>
package com.solversa;
public class Employee
     private String name;
     private String ssNum;
     public Employee(String name, String ssNum) {
     this.name = name;
     this.ssNum = ssNum;
     public void setName(String name) {
     this.name = name;
     public String getName() {
     return name;
     public void setSsNum(String ssNum) {
     this.ssNum = ssNum;
     public String getSsNum() {
     return ssNum;
Pls help me out.
Not able to prompt errors.
Hi,
Your error message are not displaying because u does not made Message-Resoucrce property file (Resource Bundle) when you make it .
give it entry in
struts-config.xml
<message-resources parameter="ApplicationResources" />
and
define key and corresponding error message to key in this ApplicationResources i.e
#Error Resources
label.search.ssNum=Plz Enter correct ssNum

Not Able to send messages using NOKIA TEXT MESSAGE...

Hi,
I am not able to send messages using text message editor. I am having N70. I also have the latest PC suite and latest phone software. Whenever I try to send message, a message appears "Unable to send". It does not even give me the reason. I have connected my phone using data cable and I can transfer music, syncronize and do other stuffs.
Can someone suggest what needs to be done to send messages using PC??
Thanks in advance.
Raghu.

Hello,
i am having the same Problem.
I cannot send any sms via my phone (N70) nor via the latest Pc Suite. It also just says "Unable to send" with no reason.
I am on:
V5.0705.3.0.1
30-01-07
PM-84
Model: N70-1
Code: 0530495
Any help is much appreciated. :-)
Kind regards,
Thorsten
Message Edited by deeplook on 01-Jul-2008 08:59 PM

Not able to select data using DB link.

Hi ,
I have created the database link in oracle 8.1.7.0.0 to oracle 8.1.7.4.0
But I am not able to select data using DB link.
The error is = ORA 12154 : TNS: could not resolve service name.
I have created the DB link with the same command in oracle 9.2.0.4.0 to oracle 8.1.7.4.0. I can select data using this link.
Please suggest me the solution.
Thanks,
Shailesh

If the service name is different on the 8i machine than on the 9i machine, you'll need to modify the service name when creating the link from 8i. Can you see the DB link in ALL_DB_LINKS in the 8i database?

HT1349 I own an Ipad 1. Recently, my imessage does not work as i am not able to log in using my Apple ID and password which before this I had been using to log in. How do i resolve this? Tq

Own an Ipad1. Recently, my imessage does not work and i am not able to log in using my existing name and passwrd. However, this existing username and password can be used to login into my itunes etc.
How do I resolve this? Tq

If the problem persists, you'll probably have to make another apple id, it wont take off any games or music or apps or anything you've bought it will all stay there, i have two apple id's and i don't have a problem with anything.

Not able to sign in using my apple id

not able to sign in using my apple id

for me same problem. could any one give solution for this problem

Not able to capture HD content from Sony HDR-HC3

I recently purchased Final Cut Express 4, after successfully using iMovie HD for the past year. I successfully captured some DV content (non-HD) from my Sony HDR-HC3 for a project. However, when trying to capture HD footage for a 2nd project, I'm not getting anything. Here's the info:
* I made the change in "Easy Setup..." to set the format to HD using Apple Intermediate Codec 1080i60.
* The footage was shot at 1080i on my HDR-HC3.
* The camera is plugged in via FireWire.
* When I choose "Capture", the the HDV Capture dialog comes up asking me for a file name. Once I give it a file name and click the Capture button, the tape starts playing and I get a black window with "Final Cut Express" in the middle (and the Apple logo). At the bottom, it says "CUEING TAPE (press 'esc' to stop)". When I press 'esc', the tape stops and the black capture window goes away.
* I never see a preview in the capture window, but I see the footage fine in my camera's LCD screen.
* A folder is created in the Capture Scratch folder, with the name I gave in the HDV Capture dialog, but nothing is ever written to this folder. It's empty.
I'm not sure what I'm doing wrong...I just don't seem to be capturing any video...FCE is seeing my camera and is taking control (starting and stopping) but nothing is actually being captured.

Ok, I figured it out on my own. Operator error.
When I had captured non HD content using my camera, I had to set the iLink (FireWire) conversion to "On - HDV-->DV" in the camera in order for it to work. I forgot to set it back to "Off", so the camera was downconverting to DV when output through FireWire. Once I turned off the conversion, I was able to capture in HD.

Satellite P300-19P not able to capture audio using Chicony Cam software

Similar Messages

Maybe you are looking for