Satellite P300-1AO - Can't enter my user profile - forgot password

hi,
i havent used my toshiba Satellite P300-1AO for more than half a year since I am having a new laptop.
Now I need to grab some data from the satellite but I cant coz I forgot my user password.
And I am probably too dumb to reset is, because after inserting both an empty CD and after connecting a USB Stick the computer says that CD/ USB Stick cant be used for resetting the password. What am I doing wrong?
I need the data from that thing and the more I am waiting the more I am getting nuts...
Can anybody please help me?
Thanks in advance,
Timo

Timo if you can obtain 2,5 AluminumSATA HDD Enclosure connect HDD from your P300 to another PC as external device. On this way you will be able to have full access to all saved data.
After doing this put the HDD back and install original recovery image or Win7 32bit. It works perfectly on P300.

Similar Messages

On Yahoo Mail...and ONLY Yahoo Mail..I get a 404 error after entering my user name and password. This doesn't happen with IE, just Firefox, and just Yahoo Mail. Yahoo was absouletly no help whatsoever; can you solve the mystery? Thanks

On Yahoo Mail...and ONLY Yahoo Mail..I get a 404 error after entering my user name and password. This doesn't happen with IE, just Firefox, and just Yahoo Mail. I tried uninstalling and reinstalling FF; no change. Yahoo was absolutely no help whatsoever; can you solve the mystery? Thanks

HI Emmet,
thanks so much for your posts back. I really appreciate it and yes that does help to know that you could not get it working.
I did have some success, in removing the SSL Authentication checkbox in the smtp server settings - I found that this allowed my friend to be able to send mail from the mail app via his sbcglobal (yahoo) account.
So that did help but of course the messages do not have ssl encryption and I'm not sure how big a deal that is for an individual. He is able to receive mail but unless the SSL authentication box is unchecked, he cannot send.
i hope that helps anyone out there also!
Thanks also for the tip about sparrow - yes I have heard of it and it is very popular, he may end up using that in the end.
Thanks again, much appreciated.
Felix

HT1338 I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my h

I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my hdd

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

I upgraded to lion. I now have the spinning wheel on the startup screen when I try to enter my user name and password. I tried shutting down and restarting, no luck

I upgraded to lion. I now have the spinning wheel on the startup screen when I try to enter my user name and password. I tried shutting down and restarting, no luck

Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

When I enter my user name and password for my e-mail account, the page won't open

My e-mail account page won't open after I enter my user name and password on the log-in page. I have vcrified with Suddenlink that my user name and password are correct.

Thanks Peter.
Partial success in that I have been able to get mails onto the iPad - however....
Progress from a previous 'rumage' on problem discussions. I have succeded in setting up the iPad so that it receives emails from the sky address under 'MAIL' on the iPad. However trying to open in the 'usual' way - safari - then sky - then email - enter user name and password - I get the same result - it just returns to the log in menu for sky email with user name and password blank.
I had a previous problem with the sky mail ceasing to show recent mails, frozen in time on the iPad. Somehow by trying some reset instructions I was able to 'unlock' the iPad and all was OK until it 'froze' again. This time I clearly screwed up attempts to unlock, resulting in not being able to access email accounts via the Sky site !!

HT3965 Can you add multiple user profile to the iPad

Can you add multiple user profile to the iPad

Hi Friend,
Apple devices are developed for single users.
Hope it helps

Can't enter Single-User Mode

I just bought tiger for my 12 inch powerbook G4. am unable to complete installation due to an error with my 10.2. The problem is I dont have the start up disks anymore and can't enter single-use or verbose-mode to fix the problem.
Any ideas on how to upgrade or enter single-use?
Thanks
Ben

An Open Firmware password is one thing that would prevent you from changing the startup disk, booting from a CD or starting up in single user mode. You would see a lock and a dialog asking you to enter your password. So, it doesn't seem that this is your problem.
If you have some file directory damage, you can use the Tiger install DVD to attempt to repair it. Put the DVD in the drive, restart and hold down on the "c" key (if you have one and then choose the language you want to use. At the next screen, do not continue to install but choose to open the Disk Utility from the Utilities menu. You can then use the Disk Utility to "repair disk" on your hard drive. The Tiger Disk Utility is pretty mature and can repair many problems.
-Doug

Satellite P300-23L - can't record audio coming from an internal source

Hi.
I can't record audio coming from an internal source. Can someone assist please?
I have reinstalled the devices etc but other recording devices does not show up.
Thanks
Operating System: Windows Vista Home Premium (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.100218-0019)
Language: English (Regional Setting: English)
System Manufacturer: TOSHIBA
System Model: Satellite P300
BIOS: PhoenixBIOS 4.0 Release 6.1
Processor: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz (2 CPUs), ~2.0GHz
Memory: 2908MB RAM
Page File: 3012MB used, 3005MB available
Sound Capture Devices
Description: Microphone (Conexant High Definition SmartAudio 221)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: CHDRT32.sys
Driver Version: 4.83.0001.0000 (English)
Driver Attributes: Final Retail
Date and Size: 1/15/2009 14:50:10, 439296 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF
Message was edited by: markrowe

This is OK because the Conexant sound chip does not support other sources
Ive got a unit with Realtek sound chips and with Conexant sound chip.
The Realtek support the recording from other sources but Conexant doesnt.

Satellite P300-19H : Can I replace T5750 by T7500?

Satellite P300-19H
Rfrence : PSPC4E-04M015FR
Question : Upgradable ?
Hello,
Can I replace T5750 by T7500?
cordially

Check please http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm
Generally speaking CPU upgrade is not supported. Some people have reported about successful CPU upgrade but I think it is not necessary. RAM upgrade to maximum level will increase laptop performance and it should be enough. What do you think about this?
Is there some reason for CPU upgrade?

Can't access old user profile data (folders with - signs)

Hi,
My iMac (model below) running 10.6.8 would not load from the start-up screen, so I reinstalled the OS from the instalation discs. After doing so I was able to gain access the desktop, but had been assigned a new user profile. My previous music, email, photos etc. were stored in a "previous system" folder, and while I can access the overall folder many of the sub-folders have a in the lower corner which keeps me from being able to open/access them.
Is there a way for me to open or move these files? Or perhaps reinstate this "previous user" to the system?
I am further stuck because I purchased the upgrade from 10.4, to 10.6 electronicially and now can't access the information needed to return to that system.
Any helpw would be greatly appreciated.
Thanks, Scott

Thanks Again Niel, you are super fast!!!
I went to the system preferences and then user and saw that the only user currently was also marked as "Admin". So I tried it again with my photos folder and entered the longer name and password I set up and it worked. What was different was that I changed the Admin name from the "short" name put in the field automatically to the "longer" name along with the password.
Not sure how this going to work with my email or how to get back to my upgraded version of Mac OS, but I guess I can keep playing with it and see.
Thanks again,
Scott

How can I hide the user name and password from the url address?

Good afternoon every body,
I have a form running with Oracle9i Developer Suite Release 2 and when I run the form on the web it shows the user name and password of my data base. Can anyone of you please help me to hide the user name and password, if there's any way of course?.
Thanks a lot!!.

Luis,
Then, as inolau's notice, create logon screen (or use the default one) and force the users to logon at runtime. Do not pass username/password as parameters.
inolau,
True that if the connection is specified in the config it will be the same for everyone. However, every case is different. For example one of our apps gets S3 credentials (from non-Oracle S3) as session parameters. It uses this common db connection to validate some stuff with the database, read security definitions and then it re-connects the forms using the credentials.

Enter valid user name and password

Hi,
I am unable to enter the software through manager password and as well as other user id also. I have also check the user table u201DOUSRu201D that table also missing in the DB. Also I tried in the previous DB. But same thing happen. Please help me.
regards
Sajal

Hi Mayank,
I suggest you to restore the database from a valid backup version. You are not sure if other database objects were deleted.
Regards,
Ruddy Avalos
Support Consultant
SAP Business One

Can't access my user profile with the supplied user information from Oracle

I can't access my user account at oracle.com with the supplied user name and password supplied by oracle email.
user = [email protected]

I have deleted all cookies and files, can you please give me some feedback asap. I am registered on an Oracle event that I need to be able to unregister but I can't do it since I can't access www.oracle.com.

How can i use exisitng user data(Id, password) for user mapping

Hi All,
For User mapping , we can import user mapping data for many users from user administration. and for each user
we can maintain mapping data in the standard format.
eg:
[User]
uid=user2
$usermapping$:BCE:user=ext_user2
$usermapping$:BCE:mappedpassword=password
i am clear till this point.
this all works if we know the userid and passowrd on the system 'BCE'.the passwords on the system 'BCE', are encrypted . so there is no chance for me to know the passwords.
so how can i use the existed userid/passowrd on the system 'BCE' for the mapped user and mapped password on the portal while doing usermapping.
Thanks in Advance,
Lakshmi

Hi,
I think this should work.
1. Setup SSO with SAP logon tickets first. How to do this is described many places, e.g. http://help.sap.com/saphelp_nw04/helpdata/en/d3/41c8ecb31d11d5993800508b6b8b11/content.htm
This SSO will not work at first, because the username is different in the back-end system. So what you need to do is to get the back-end username into the ticket (don't need a password because that is done by the SAP logon ticket)
2. Create a portal component which uses the usermanagement API to create a usermapping which only consists of the username and a blank password. You can do this manually I think if you have no reference system defined.
IUserMappingService umap =(IUserMappingService)PortalRuntime.getRuntimeResources().getService(IUserMappingService.KEY);
//this is the currently logged in user. You might another user
IUserContext user = request.getUser();
//Get the existing data (think it can be null)
IUserMappingData userMapping=umap.getMappingData(systemAlias, user);
HashMap map = new HashMap();
                         map.put(IUserMappingService.UMAP_KEY_USER, backEndUserName);
//add blank password               map.put(IUserMappingService.UMAP_KEY_PASSWORD, "");
//store the values                    userMapping.storeLogonData(map);
Voila, this should allow you to do SSO using SAP logon tickets, but with another name that you use against the portal. I am uncertain if this will work if you have multiple usermappings in the sap logon ticket
PS since the sap logon ticket is issued at logon time, you need to relogon to get the changes done by the code
Regards
Dagfinn

Displayed data in User Details vs. Information entered in User Profile

Hello All,
I am running Portal 7.0 SPS13.
In my Users Profile tab "Additional Information" I entered:
Organizational Unit: NIS
Position: Consultant
Department: <is greyed-out / not editable>
In my Users Details tab "Company" I only see:
Job Title: Consultant
My Questions are:
1) Why do I only see the Information from "Position"
2) The greyed out field "Department" is not filled (I guess at this point that it gets filled with the department information from the MS ADS (LDAP). But it's not. Whoever the telephone information from the MS ADS is transferred to the regarding UME fields
Thank you in advance for your help and hints.
Kind regards,
Philipp

Hi Neeraj,
i have already configured as below_
User Details Data Source
          Target Connector =ECC system
           Sequence=1
           user Data Type=HR
Regards,
Arif

Satellite P300-1AO - Can't enter my user profile - forgot password

Similar Messages

Maybe you are looking for