Satellite P300-1DT PSPCCE - How to change keyboard

Hi,
I am looking for the disassembly documentation for my notebook.
I need to change the keyboard. I have 2 letters which are broken.
Thank's a lot
Clickservce

Hi
I agree with user above; the keyboard replacement is not really difficult;
Two or three screws secure the keyboard. Remove the thin plastic cover above the F1-F12 button row. Remove the screw and lift up the keyboard.
But be careful because the flat cable connects the keyboard to motherboard. You will need to disconnect the cable firstly. There are two tiny latches on both sides of the connector. You have to move the latches in order to take off the cable.

Similar Messages

  • How to change keyboard map fmrweb.res for different forms

    I'm using Oracle Forms 10g with Oracle Forms and Reports Application server 10g.
    I know how to change fmrweb.res to change how keys function on web forms. The problem I'm having is I only know how to assign the fmrweb.res file when connecting to the application server, which means all forms running on that session have to use the same keyboard mapping.
    I know you can change the defualt fmrweb.res for all the forms executed on the application server
    and you can change the fmrweb.res file in the URL like
    server/forms/frmservlet?Form=login.fmx&config=dataentry
    (where dataentry is defined in the formsweb.cfg file)
    and in the config section I have
    [dataentry]
    term=fullpath/fmrweb_new.res
    My question is, is there a way to pick a different fmrweb.res file based on the form?
    Can you specify multiple forms in the basexxx.htm file(basejini.htm) in the PARAM section like
    <PARAM NAME="serverArgs"
    VALUE="module=form1.fmx term=fillpath/filename1.res"
    VALUE="module=form2.fmx term=fillpath/filename2.res"
    VALUE="module=form3.fmx term=fillpath/filename3.res"
    VALUE="module=form4.fmx term=fillpath/filename4.res">
    Is there a way to pass term=fullpath\filename.res to the Oracle Forms Web Runtime process for each form using call_form, open_form, or new_form?
    Edited by: user537213 on Sep 19, 2008 5:38 PM
    Edited by: user537213 on Sep 19, 2008 6:24 PM

    Posiible approach (i now it sounds strange):
    Configure your enter-key to fire the KEX-EXEQRY-Trigger.
    In the dataentry-form-module: Overwrite the KEY-EXEQRY-Trigger so thtat is just does a NEXT_ITEM; .
    I know there may be other implications depending of the compelixity of your dataentry-form, but maybe this helps.

  • How to change keyboard shortcut for cycle through open tabs in PS and AI CC 2014

    I would love to set my own keyboard shortcuts for cycling through open tabs in PS and AI 2014 on OS X. I found out that this can be achieved with ctrl+tab in PS, but I couldn't manage to make any of the suggestions in the forum work for AI. As said, I would like to set a more "standard" shortcut like alt+cmd+arrow-keys for both of the apps. If that shouldn't be possible, does anyone know a shortcut in AI CC 2014?
    Many thanks!
    Amadeus

    Thanks! The shortcut can be set like this in AI, although all key combinations I would want to use are not allowed. Too bad. But anyways, thank you very much for the tip!
    cmd+~ is not an option for me, I guess, since the swiss/german keyboard layout has no dedicated tilde key.
    So, I have a working shortcut in PS (ctrl+tab / of which I still don't know how to change, if possible at all) and thanks to you, I can now set one in AI as well. Unfortunately, I can not set it to be identical as in PS, since the "cmd" key needs to be included in AI's shortcut assignment dialogue, but I guess, this is as good as it gets.

  • Preview How To - change keyboard shortcut for dictionary def.

    Hi,
    I would like to know how to change the keyboard shortcut for checking the dictionary definition of a highlighted word in Preview.
    Thanks,
    Brandon

    Keyboard shortcuts are handled in System Preferences/Keyboard/Keyboard Shortcuts/Keyboard & Text Input...

  • Satellite P300 - One Key not working on keyboard

    Hi all,
    Does anyone have a suggested solution to fix a key not working on my laptop? One letter on my keyboard "the letter b" has stopped working.
    Laptop is Satellite P300- "PSPCA-01U013"
    Thanks :)

    Hi Ricco1,
    The problem is that single keys cant be replaced so if a certain key doesnt work its time to replace the whole keyboard but dont worry, new keyboards are not so expensive. Just get in contact with an authorized service provider and ask for a new keyboard, the guys are able to order a new one and they can replace it for you if cant do this yourself.
    Here you can find a list of all ASPs:
    www.mytoshiba.com.au > Support > Find a service center

  • Satellite Pro C660-1JL - How to change the language of Windows 7?

    Hello,
    I bought Toshiba with preinstalled official Windows 7 Professional 64 service pack 1. And would like to change language from German to Russian.
    According to instructions from microsoft home page I could not get the result. MUI pack is not shown when searching for Windows up-dates (some other up-dates are only available, but not language pack)...
    What would you recommend how to solve this problem ?
    Its Satellite Pro C660-1JL

    Hey,
    > I bought Toshiba with preinstalled official Windows 7 Professional 64 service pack 1
    You cant change the language on Windows 7 Professional, this is only possible on Windows 7 Enterprise (volume license) and Windows 7 Ultimate.
    So if you want another language, buy Windows 7 Ultimate or be happy with current language of Windows 7 Professional. ;)

  • How can change keyboard shortcut from windows media player to itunes?, how can change keyboard shortcut from windows media player to itunes?

    I have ASUS N55SL (with Windows 7) and my keyboard has music shortcut keys (like play,Stop,...) but work with Windows Media Player I want change this shortcut key to Itunes!

    Just import the music into iTunes from wherever it is on your hardrive.

  • How to change keyboard shortcuts

    Hi everyone
    can anyone help me to modify the keyboard shortcuts in Indesign CS4.  When I create a new set in Edit Menu Keybord shortcuts and try to change Cmd+H to hide frame edges instead of hide indesign its not happening. can anyone tell me what is correct way to change the shortcut.
    Thanks
    Azeem

    What's the default for hide edges on Mac? It's Ctrl + H which would in most circumstances lead me to think that it would be Cmd + H on Mac, but I think you are running into a problem with the OS using that key combo and intercepting the keystrokes.
    Edit: that should have been Ctrl + H on Windows.

  • Satellite 1800: dim monitor - How to change the contrast

    Hi, satellite 1800 has a dim screen that I cant seem to resolve. The images are just about visible. Its fine with an external monitor-is there a contrast button anywhere?!

    Hi
    You can change the display brightness with the key combination FN+F6 and FN+F7.
    If it is not possible so I assume there must be something wrong with the hardware (FL inverter)
    Usually if this part is defect the display is not clear. In this case you should contact the ASP in your country.

  • Slow boot up with Satellite P300-18M (PSPCCE)

    This question has already partly been asked, however, I would like to ask everyone this question specifically:
    Does anyone experience a slow boot up with the P300-18M ?
    Please, even if your machine boots properly, I would be grateful for a reply, so that I can see if it is a problem with all of these machines, or if there is a problem with mine.
    By booting slowly, I mean that:
    After the vista 'Loading' screen, and 'Orb' appear:
    http://vistasupport.mvps.org/images/install_vista/vista%202%20copy.jpg
    http://www.windowsreinstall.com/winvista/images/Image57.gif
    I get the screen below, for about 2 minutes:
    http://farm4.static.flickr.com/3033/2853070854_91b4b7dcfa_b.jpg
    I have tried disabling EVERYTHING from starting up at boot (using MSCONFIG)
    Could people please share their experiences with the P300-18M
    Thanks, Jack

    Do you have a network attached? Perhaps DHCP is slowing the system?
    Vista has a built in Boot logger in Event Viewer, which shows you a list of Events that took longer than normal.
    Go to Control Panel -> Admin Tools -> Event Viewer
    Then go to Applications and Services Logs -> Microsoft -> Windows -> Diagnostics-Performance -> Operational
    Here are some screenshots
    http://content.zdnet.com/2346-12354_22-64715-2.html

  • Satellite P300-220 (PSPCCE) and express card with firewire

    I have problems with a shared IRQ between firewire (IEEE1394) connector and ati radeon 4600 mobility.(the IRQ used by both device is the 16)
    This sharing make my firestudio presonus (sound card external via firewire) problems while reading music on my DAO.
    I would like to buy an express card to solve this problem but i must be sure than it will not be the same IRQ (16) than the other firewire connection.
    If you are using such a card please verify wich IRQ is used when it's connected on the laptop.
    You can see it with the device manager.
    Thanks a lot.
    toskidus

    Hi
    The Windows OS controls and assigns automaticity all recourses to all controllers!
    In my case the SD host controller and the graphic card shares the same IRQ 16 and there is NO conflict.
    So I doubt that your issue is related to the same IRQ which is uses by graphic card and firewire.
    Sorry but this is everything what I can suggest regarding your issue

  • Satellite P300-1GI (PSPCCE) What happens with Vista after install of Win 7?

    Hello,
    I'm planning to instal windows 7 onto my notebook but want to know what happens with my windows Vista I'm currently running. I already have made the recovery DVD's but are these enough to reinstal windows Vista after I installed windows 7? or wat can I do to make this possible?
    (I'm sorry for my bad english, I'm from the netherlands)
    Thanks,
    Futience

    Hi
    The recovery disk allows you to reinstall the Vista and all the Toshiba drivers and tools.
    Dont be afraid to install Win 7.
    If something will go wrong, you will be able to recover the notebook using the recovery disk. This will set the notebook back to factory settings
    Cheers

  • Satellite P300-19P - How to change from NTSC to PAL?

    Everytime I want to display on my TV I have to change the TV from PAL to NTSC as I can't find how to change the S-Video output on the laptop from NTSC to PAL.
    Does anyone know how to?
    Cheers.

    Hey,
    Im not owner of Satellite P300 but either you can change this option in BIOS or in display driver. Normally there you have an option to change between PAL and NTSC on S-Video output.
    Check this!!!

  • Satellite P300 PSPCCE: I want to remove or chang splash screen on startup

    I have Satellite P300 PSPCCE laptop and want to remove or change splash screen on begin of booting laptop.
    Is there a way to do it? My Bios version is v3,40

    this is how it looks my BIOS setup (no options like quite boot, fast boot, etc.)
    Main
    * System Time
    * System Date
    * CPU Type
    * CPU Speed
    * HDD1 model name
    * HDD2 model name
    * Optical Disc driver
    * Power on display
    * Total Memory
    * System Bios version
    * Language
    Advanced
    * Legacy USB Support
    * Core Multri-Processing
    * Execute-Disable bit Capability
    * Intel(R) Virtualization Technology
    * Built-in LAN
    * Wake-up on keybord
    * Wake-up on LAN/Wireless LAN
    * Critical Battery Wake up
    * Pointing devices
    * Illumination LED
    * USB Sleep and charge
    * HDMI-CEC
    * Remote power on/off
    * SATA controler Mode
    Security
    * User password Is
    * Supervisor password is
    * Set user password
    * Set supervisor password
    * HDD1 password
    * Set HDD1 User password
    * HDD2 password
    * Set HDD2 User password
    Boot
    * HDD1
    * HDD2
    * CD/DVD
    * FDD
    * LAN
    Exit
    * Exite saving changes
    * Exit discarding changes
    * Load setup defaults
    * Discard changes
    * Save changes
    Which version of bios, are you having?

  • Satellite P300 - Keyboard layout changed

    Well, I am running a Toshiba Satellite P300 and I am having problem.
    I just got it back from repair and they changed the motherboard. I have updated the BIOS. I did a fresh OS install to Windows 7 that. I didn't have this problem before it went out for repair but now when I press the Num Lock key, it changes my number pad to numbers, as expected, but also changes the right side of my keyboard to numbers as well which is very frustrating.
    I have been surfing for 2 days online to find a solution to it and even called the tech that was in charge of the repair and no one has any answers for me.
    And another problem after repair : without Model Name ,Part Nr and Serial Nr
    [PC Information|http://forums.computers.toshiba-europe.com/forums/]
    *Model Name* yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
    *Part Number* yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
    *Serial* Number None
    OS Version Microsoft Windows 7 Ultimate 6.1.7600
    BIOS Version V3.30
    CPU AMD Turion(tm) X2 Dual-Core Mobile RM-70
    Physical Memory 4096MB RAM
    Hard Disk Capacity 449,892,560,896 [Byte|http://forums.computers.toshiba-europe.com/forums/] 418.995 [GB|http://forums.computers.toshiba-europe.com/forums/]
    Hard Disk Free Space Capacity 147,790,635,008 [Byte|http://forums.computers.toshiba-europe.com/forums/] 137.641 [GB|http://forums.computers.toshiba-europe.com/forums/]
    Video ATI Mobility Radeon HD 3650 version=8.634.1.0
    Screen Resolution 1440 x 900 Pixels
    Color Quality True Color (32 Bit)
    Sound High Definition Audio Device version=6.1.7600.16385
    High Definition Audio Device version=6.1.7600.16385
    Network Atheros AR9281 Wireless Network Adapter version=8.0.0.325 MAC Address=00:21:63:61:13:EC
    Modem HDAUDIO Soft Data Fax Modem with SmartCP version=7.68.0.50
    Internet Explorer 8.0.7600.16385
    IDE Device TOSHIBA MK2552GSX ATA Device
    GDAN ENGD67O5IR85 SCSI CdRom Device FW version=3.5Z
    HL-DT-ST DVDRAM GSA-T50N ATA Device FW version=RT03

    So far it looks like W7 has the correct driver and the external keyboard has its key presses correctly processed.
    Next?
    When you press num lock on the external keyboard does it also toggle the alpha keys on the keyboard to numerics? - Trying to establish if the key code from the external k/b is the same as that generated by num lock on the laptop. Your laptop is behaving as if it is a laptop with no numeric key pad and you can toggle between "numbers or text". I've had a search and can find no "shortcut" keystrokes to do that - I also searched to see if a "Shift Lock" could be emulated since that is a key that has disappeared from modern keyboards.
    I presume you have checked that your BIOS is the current version. The only other suggestion I've got is that the replacement m/b has not had Toshiba "lock outs" applied and it is in a generic bios state and you can access settings such as the number of keys on the keyboard or legacy keyboard support. Suggest you identify some "small" Toshiba laptops with no numeric keypad and download their manuals to see how they handle no numeric keypad or just ring Toshiba and ask them?
    Message was edited by: peterk_1
    With your laptop num lock on when you hold "Fn" and press one of the remapped keys do you get a letter? (add the shift key and get a capital) if so it's behaving like a Satellite L450D-11X (fn+f11 is the numeric toggle on that machine)

Maybe you are looking for