Satellite P300-1FN: CD/DVD drive issue - cannot read game DVD

Hi,
My brand new Satellite P300-1FN loaded some software ok using DVD drive but now when I put any disc in it doesn't auto run but the disc seems to run up and then a pop up window informs me after going Computer -> DVD drive to get access - Burn a Disc and wants to format.
The discs I am putting in are game DVD and other software to load but they all give the same pop up window.
DVD drive isTSST CDDVDW-TS-L633A
Can you help?

Enter Control panel > "Auto play" and define what should happen if you insert Software and games media.

Similar Messages

Imac dvd drive, will not read games disks

imac dvd drive, will not read games disks whilst running in windows 7, cd and film dvd run ok. Can not believe Apple care who told me I cannot run pc games on iMac EVEN under windows 7. Any help please.

Zap the PRAM and Reset the SMC, then try again.

HT2801 My DVD drive is not reading any DVD

My iMac's DVD drive is not reading any DVD. Whenever I am inserting any DVD, The DVD icon is not appearing and the DVD is ejected out after sometime. I have also tried the troubleshooting steps given in the apple support site by restting the SMC but my iMac still does not read any DVD. What do I do now? Somebody help me.

Could try purchasing a commercially available, retail dry brush CD/DVD lens cleaning system disc. These can sometimes revive a malfunctioning optical disc drive.

CD/DVD Drive will Not read CD/DVDs

This desktop is only about 3 months old and so far has worked great!! But since last week for some reason the CD/DVD Drive will not read any disc. The tray will open but then nothing happens at all once a CD/DVD is in. Doesn't even sound like it is spinning. Any ideas?? Please help!! Thanks!!

Also it is running Windows 8 and is a Ideacentre K410. And the CD/DVD Drive it is showing I have installed is TSSTCorpDVD-RW SH-216BB Not sure if that has always been the drive or not.

Satellite M40-145: CD/DVD drive won't read some DVDs

Hello!
I own a Satellite M40-145 purchased just over one year ago; the DVD driver worked perfectly until three days ago, but today I discovered something... peculiar. It still reads commercial DVDs and burned DVD+R, but apparently it doesn't read burned DVD-Rs anymore. I have tried with different DVD-Rs I burned through the same DVD player, with no success; trying to access the DVD yields a "insert disk in D: drive" message.
In this case, I'm talking about movies on DVDs. Please tell me there's a way to solve this without sending the computer to customer service...
I'd hate to think it broke down just days after the expiration date of the warranty.

Hi
Well, you can try to remove the drive form the device manger.
After new reboot the drive should be recognized again. Check then if its possible to read the DVD-R CD.
But the issue sounds as a lens calibration error. If you use different media the lens must be calibrated again. But if this procedure fails, the drive is not able to read or write the DVD for example.
Unfortunately, in such cases only the drive replacement will solve this issue.

MY DVD drive does not read all DVDs and also does not burn CDS properly. Often while burning a CD i am prompted that " The machine is unable to caliberate teh required Lazer Power"

Hi i am having a i MAC which has mountain lion OS 10.8.2. I am facing teh followwing issues with my disk drive
1. I am unable to read all DVDS in it some DVDS work while others do not
2. I am able to read all CD's, but while burning a CD i am prompted with the following message
" Unable to caliberate lazer power"
3. Kindly assit me in solving this problem
regards

Hi
Four thoughts
• Brand and type of DVD/CD Media
• Burn Speed ?
• Ever used a Cleaning DVD ?
• Free space on Main Start-Up Hard Disk ?
Brand and type of DVD/CD Media: MATTERS
- Memorex, NoName and other Cheap brands - most probably works for other things BUT NOT FOR VIDEO.
I only use Verbatim
- DVD-RW - usually do not work OK but with various kinds of problems. DVD+R is a more modern sort and use to give problems on older DVD-players
I only use DVD-R
Burn Speed (in iDVD or alike): Matters
• Best or Max - is not best
I set it down to x2 or x4 Max
Ever used a Cleaning DVD ?
I use one WITHOUT Liquid but with brushes from time to time
Free space on Main Start-Up Hard Disk ?
- Due to that Mac OS X - is UNIX - it behaves likewise. It needs lot's of space on Boot / Start-Up Hard Disk for it's and the applications temp files.
I never go less than 25GB free space - If HD-Video material is used then 4-5 times more is a good thing.
Yours Bengt W

Dvd drive won't read/ejects dvds at a whim

Hi all,
My macbook dvd drive seems to not wish to play certain dvds- only a few though... when this occurs, it just tends to spit them back out at me.
It's not a problem with the dvds, as they play on my dvd player, just not on the laptop...
any ideas?

Hi Peeps
I had exactly the same problem with my Macbook, again from the UK. Really weird though as would intermittantly read DVD film's which worked fine previously.
Well.... Took it to my local Apple store and saw a genius and anyway they replaced the super drive and logic board (surprised about the logic board!).
But just got it back today and the DVD drive is completely fubard so is being returned tomorrow to get this sorted!
Moral of the story, sounds like a drive or board problem. Will keep you updated when I get mine back
Macbook 2Ghz, 512Mb, 60Gb, Superdrive Mac OS X (10.4.7)

After SL-DVD drive won't read any dvd-ejects it after spinning some time

Yesterday I bought the SnowLeopard DVD in order to do the update of my Mac OS.
Right after inserting the DVD in the drive (MATSHITA CD-RW CW-8221) it started to have some problems with reading the DVD.
The Drive has stopped recognizing/reading any blank DVD media (and many recorded DVDs, including movie discs). It spins for some time with a noise and then ejects it out. The same media works fine in my Toshiba laptop.
I tried several times, but the drive isn't able to read the DVD and now has the same problem with other CD-Roms and DVD.
I am very suprised (and angry) about it, especially because I hardly use the drive.
As a lot of other people are having the same problem, there seems to be a structural problem with the drive and I think that Apple has to clearify if they are planning to do something and what.

Mine MacBook seems to be doing almost the same thing. The SL disk spins a bit then is ejected. It does the same thing with my first SL disk and the one Amazon sent as a replacement. I had the same trouble with the 10.5 Install disk purchased retail. Apple sent a replacement Non-retail disk and it worked. I can burn DVDs and read DVDs I've burned.

CD/DVD drive does not read all DVD formats and regions

Hi
My Teac-dw-224e-a does not read all DVDs formats and regions.
It does read CDs but no DVDs at all.
Not DVD-R and not even regular DVDs. I have checked the region of the DVD.
I have reinstalled the driver and also tried with different software.
What can I do?
Please help!

Hi
It is possible that your DVD drive has wrong region settings.
In this case it is not able to watch all possible DVD movies from different regions.
Of course you can change the settings 4 times. But after this changing the settings are fixed and its not possible to change it anymore.

Help :( DVD Drive will not read Blank DVDs but movie and data DVDs ok.

I am at loss what to do. Whenever I put in DVD with media in it (including +R), it plays and reads it all just fine. CD data reads no problem too. However, when I put in a Blank DVD, it chugs and ejects it out completely.
Preferences are fine. It says 'Ask What to Do' is set when 'You insert a Blank DVD'
Here was how it started. Previously, I could put in a blank DVD and it would be just fine but I'm having problems burning after the 10.5.6 update. Read in a post somewhere to try resetting your PRAM which I did and now it won't accept the blank DVDs. Everything else is fine.
I know a lot may say it's a bad batch, but I bought a new batch, Memorex vs. Verbatim and nothing.
Would really appreciate ANY help I can get!
Hardware Overview:
Model Name: MacBook Pro 17"
Model Identifier: MacBookPro2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 4 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP21.00A5.B08
SMC Version: 1.14f5
Serial Number: W86*
Sudden Motion Sensor:
State: Enabled
MATSHITA DVD-R UJ-85J:
Firmware Revision: FAV1
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: Insert media and refresh to show available burn speeds
< Edited by Host >

Repairing permissions yes. But in my head, if everything is working fine for it, just won't read Blank media, could it be a software thing?
I'll give it a shot in a few hours

DVD Drive won't read blank DVD+R or DVD-R media

It just, ehm, won't. I've tried both, and I've never had any problems reading DVDs or writing CDs, though this is the first time I've tried to write to a DVD. When either disc is in the drive, the computer acts as if it's simply not there--Explorer, Nero, and everything else all act the same. Help would be greatly appreciated, because this DVD is fairly important...
I'd be more than happy to answer any questions about the problem, if you have any.
Thanks!
ThinkPad T61p [June 2008]: 2.5Ghz Penryn Core 2 Duo, 4GB DDR2 RAM, NVidia Quadro FX 570m 256MB, 160GB 7200RPM Fujitsu HDD, 1920x1200 WUXGA Matte LCD, Windows 7 RC1

it would be helpful if you could post which T-Series system you have, even better post the Type and Model Number this will help members to help you. If it ends in CTO please provide some details about it. Please do NOT post your s/n.
Thanks
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

After BIOS update DVD driver do not read DVDs anymore - Sat A80

Hi,
I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
Can I reinstall the old bios? Can I reinstall the firmware?
Thanks
Ronai Lisboa

Hi Ronai
Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
However, it's nice that you have solved the problem and that the drive works properly.
Thanks for the feedback.

Dvd drive does not read dvd but reads cd only.

my hp compaq 420 core2 duo dvd drive does not read the dvds but only reads the cds. How can i solve this problem, please help me with the correct answer.
This question was solved.
View Solution.

It will likely require replacement of the drive. There is more than one laser in there: one for each function. One can go bad without the other going bad.
608141-001
Above is the part number for the DVD burner drive. I could not find one on eBay. Here is one online:
http://www.mydvddrives.com/replacement-for-hp-compaq-608141-001-sata-cd-dvdrw-dvd-ram-drive-burner-l...
Replacement is easy. Remove a single screw on the bottom and slide the old drive out and replace with the new drive.

Dvd writer cannot read blank dvd-r

my dvd/cd writer cannot read blank dvd-r but i can play dvd movies and can read blank cd-r can u pls.. help me tnx HPnc6400

zyprus wrote:
may be 7yrs.i try only dvd-r... but cd-r is ok.
Hi,
DVD-R and CD-R are two different things. 7 years old, most likely it only supports DVD+R. Please try DVD+R.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Cannot boot the Satellite P300-1FN - nothing happens

Hi all
I recently re-installed windows 7 on my Satellite P300-1FN and after some minor glitches it was running fine.
I stalled some drivers and updates then it prompted me to restart.
I turned it off and left it while I had lunch then tried to boot it and nothing happened.
I mean nothing, not even the light for mains power comes on. I put the battery in which I know has at least half a charge and nothing.
Changed the fuse again nothing. What is this about?
It's completely dead.
Any help appreciated.
G

>I mean nothing, not even the light for mains power comes on.
Sounds not good man
Sounds like CPU or motherboard issue because no LEDs are on.
But try this;
Disconnect Ac adaptor, remove the battery, wait some time (2-4 hours) and connect both parts again.
Check if you could power up the unit.
If this would not be possible then I would recommend contacting an professional ASP technician
Sorry but this is everything what I can suggest

Satellite P300-1FN: CD/DVD drive issue - cannot read game DVD

Similar Messages

Maybe you are looking for