Satellite P300-23M - Has the HDD 4200rpm?

Hi,
Is the information right, that the HDD has only 4200rpm?
Or is it a mistake?
THX

What do you with the notebook?
If you use the notebook only for Internet, emails and office the 4200rpm HDD is fast enough.
I think a faster HDD is only useful if you often work with big files with a lot of GB.
Furthermore a faster HDD doesn't improve the game performance.
Dont forget that a HDD with more rpm is not so quiet.

Similar Messages

  • Satellite P300 - I need the part number of the original screen

    Please can anyone help?
    I need to get Toshiba part number for the original screen in my Satellite P300-20H. My laptop fell of the bed and the only way I can use it is with an external display
    all else is fine with the laptop but it would be a great help if I could get the part number for the original 17" WXGA+ TruBrite.
    Please feel free to email any help you have: Email:[[email protected]]
    much thanks
    Welsh_Jam

    Hello
    I think nobody here can anwer your question: Its only a user to user forum and you will not find any notebook technicians here they can tell you the part number of the screen.
    If you want to know it you should contact an ASP. They can order all original Toshiba parts:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Find an authorized service provider
    Greets

  • Satellite L305D - Cannot partition the HDD - Vista

    I have a new Satellite L305D toshiba laptop that i am unable to partition.
    It runs on windows vista.
    I have freed the hdd up to 74gb out of 120 gb capacity.
    Recently i used paragon partition utility that reports cross linked files and hence is unable to do the partition.
    The Vista shrink utility does not even display anything it appears as 0.

    Hi
    What type of partitions you have now exactly?
    Maybe you can post a screenshot of Vista disk management utility because Im a little bit confused now. You wrote about 74GB free space and Vista doesnt show anything
    I hope this can help you a little bit:
    http://aps2.toshiba-tro.de/kb0/TSB7101OB0006R01.htm

  • Re: Satellite P300-20h - Is second HDD possible?

    Hi,
    I have a p300-20h. On the underside there seems to be a space for a second hd.
    The underside of the cover for the second hd has sticks that stop me from installing the second hd.
    Is this to deter the installation of a second hd?

    Macius,
    Thanks for your response. I have the hard drive connectors. The problem is that when I have a drive in place I cannot close the cover because of the cover extensions. Did your brother purchase another cover or did he saw off the extensions? Thanks.

  • MacBook Pro starts up with blinking folder and question mark in it. Is there a fix to this issue or has the HDD crashed for good?

    I startup my mac and I see a white screen background with a folder icon in the center and a question mark blinking in the center. Called Apple and the rep says this is probably a HDD crash. Only solution is to take it into a Apple store and get a replacement HDD which would cost $300 and upwards. This mac book is about 15 months old and cost $1300. Needless to say I'm highly upset. Does anyone have a fix to this?

    Flashing folder with question mark?
    Go step by step and test.
    http://support.apple.com/kb/ts1440
    Startup Manager to select Startup disk.
    http://support.apple.com/kb/HT1310
    Repair Disk
    Steps 2 through 8
    http://support.apple.com/kb/PH5836
    Reset PRAM.
    http://support.apple.com/kb/PH4405
    Reinstall OS X
    http://support.apple.com/kb/PH10763?viewlocale=en_US

  • Re: Question about the Satellite P300-18Z

    Hello everyone,
    I have a couple of questions about the Satellite P300-18Z.
    What "video out" does this laptop have? (DVI, s-video or d-sub)
    Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
    What is the warranty on this laptop?

    Hello
    According the notebook specification Satellite P300-18Z has follow interfaces:
    DVI - No DVI port available
    HDMI - HDMI-out (HDMI out port available)
    Headphone Jack - External Headphone Jack (Stereo) available
    .link - iLink (Firewire) port available
    Line in Jack - No Line in Jack port available
    Line out Jack - No Line Out Jack available
    Microphone Jack - External Micrphone Jack
    TV-out - port available (S-Video port)
    VGA - VGA (External monitor port RGB port)
    Also you can connect it to your LCD TV using HDMI cable.
    Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

  • Satellite P300-05x - keyboard is loose up the top right

    Hi
    i have a new Satellite P300-05x and the keyboard is loose up the top right side mainly between buttons 5 and the backspace button say.
    It is very anoying and it clicks/ makes noises as it moves up and down when i type..
    I'm sure its nothing to worry about but very anoying with a new laptop
    Has anyone experianced this and is it a simple fix?
    Thanks
    Dave

    Hi,
    I agree with Jack Black. I never noticed such an issue on my Toshiba notebooks.
    But in my opinion this is not normal and so you should go to an authorized service provider. They can check your notebook and exchange the keyboard if its necessary.
    Here you can search for an ASP:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Find an authorized service provider

  • Satellite P300 (PSPC4E) - BIOS is corrupted

    I have some trouble with my Toshiba Satellite P300 (PSPC4E).
    The BIOS is corrupted and I'm trying to recover it.
    I've disconnected the battery, HDD and DVD.
    I successfully created an USB boot disk using HP USB Tool and CrisDisk.
    It was empty after I run it. I copied three files into it, PHLASH16.EXE, Autoexec.bat and my laptops bios, named bios.wph (version 4.20).
    Using CrisDisk the required files was moved there automatically.
    I've tried multiplie key combinations, following the boot instruction (USB -> Power Cord -> Power Button), as FN/WIN + B/F, FN/WIN + ESC.
    When I boot up with FN/WIN + B/F, it just boots up "normally", all LEDs light up and the screen stay black. The USB doesnt flash or anything.
    Using FN + ESC is a different story though, no LEDs light up, except for the power button.
    The USB flashes briefly, for a few seconds, and after a little while the laptop begins to beep.
    When I say beep, it really beeps, loudly as h***l! 1 long beep + 2 short beeps, which goes on constantly.
    I left it for about 10-15 minutes, but nothing happened. The beeps were really loud, so I shut it down.
    I tried doing the key combination without connecting the USB, and it did the same thing, 1 long + 2 short beeps.
    So, am I doing something wrong here?
    Also, I wonder if it is possible to turn down the volume of the beeps.
    Would be really grateful for any help I can get.

    Excellent, seems to be the same BIOS, thank you very much.
    Tried them all and none worked though, I believe I need the right Phlash16-version.
    Read in a thread about people having the exact same problem and what they needed was the right BIOS-file with the right Phlash16-version.
    http://h30434.www3.hp.com/t5/Notebook-Lockups-Freezes-Hangs/Pavilion-DV6700-bios-recovery-from-usb-disk-problem/td-p/646151
    Now I've tried all BIOS files with like 4-5 different Phlash16.exe, but to no avail.
    It seems like it should work, everything points at that, the laptop recognizes the USB and such, but it just refuses to flash.
    I've also tried to use "Compress The Bin File" which apparently helps recovering some Acer models, I've tried with the battery connected, USB-port at both left and right side of the laptop. It doesn't matter what I do, the result is always the same, the USB flashes a few times, then nothing happens for several seconds before it beeps. I've wasted so many hours at this it's ridiculous.
    Nobody who had this actual model and recovered it?
    Have any good guess which Phlash16-version should work?

  • Can't boot from CD in my Satellite P300-23F

    Hello,
    I'm trying to fix my brother's old laptop. It is a Toshiba satellite p300-23f. The laptop didn't work well, so he bought another one. I think it might have a problem with the HDD, but I'm not sure about that, and want to try and format the HDD and reinstall the operating system.
    When I initiate from the HDD I have no problem, the OS initiates normally, and I can "use" the laptop. The problem is when I try to boot from the OS CD. I get that message "Media test failure, check cable". I know the CD works, because recently I instaled the OS with that CD on another computer. And I know the CD lector (not sure if it's called like this, but I think you understand what I mean) works fine too, because I've tried different CDs, and it worked.
    I already tried pressing F12 and booting from the CD there, and also tried to change the BIOS and put the CD on the first place, but it doesn't work.
    Any clue what's going on? Is there any way to make it work?

    Problem can be optical disc drive. In some cases lens cannot be calibrated for reading DVD but you can still use CDs.
    I also think that ODD is defective.
    It is good idea to create bootable USB. So you can use USB to install operating system.
    If you need some assistance with drivers, tools and utilities installation let us know. just start new thread.

  • Satellite P300 recently stopped charging when switched on

    My Toshiba P-300 has recently stopped charging when switched on.
    I have no concept as to how this has happened.
    It will charge fine when the laptop is either in sleep or switched off, but once it has been turned on it will not remain charging.
    Anybody know what's causing the problem, or has anyone else encountered this before.
    How was it solved?
    Thanks

    You must understand that charging process works automatically and it is controlled by power supply electronic. I dont know why this happen and answer to this can give you service provider after notebook check.
    Anyway, Satellite P300 is not the newest notebook model and described issue can be related to defective battery.
    When the notebook is ON and OS loaded remove battery for few seconds and put it back. Will charging procedure start or not?

  • Satellite P300 - Easy keys turn power on. Can this feature be turned off?

    Hi.
    just received my Satellite P300-15D yesterday and I am experiencing the following problem:
    The laptop starts working by itself after being shuted down. I noticed that during off period, if you touch the CD/DVD/MEDIA Easy Key it turned power on. So the thing is: I cannot close the laptop because after a while it turns on by itself.
    Maybe because screen contacts with the easy keys surface...don't know...weird... any help? (O.S. Windows Vista Home Premium). It happened a lot of times....can't we disable the power on function of the easy key? I have been searching for an application for this and didn't find any...or in extremis...can't we just shut the digital easy keys feature off?
    Thanks

    Hey all,
    I'm having the exact same problem with a Toshiba Satellite P300 here. The multimedia button seems so sensitive that the laptop will turn on by itself after a while. I haven't been able to find a program to disable it. Has anyone found a solution to this? If you do, please send me an email at [email protected] (remove the nospam) so I can fix it once and for all.
    Thanks,
    Dre

  • Strange keyboard issue on a Satellite P300

    Hi,
    Since a week i have a problem with my keyboard on my P300.
    The keyboard doesn't work when the power supply is on. The keyboard is inactive on vista and in the BIOS.
    When i cut the power and the PC is on battery the keyboard is OK.
    Do you have any infomations about this problem ?
    Thanks.
    oliv

    Hi Oliv
    Such issue is not known to me and I think it must be hardware related issue.
    What you can do about it? Not much except to try with BIOS update but I dont think it will help.
    Satellite P300 is not the newest notebook model. Since when you have noticed such strange keyboard behaviour?
    To be honest I think you should contact Toshiba service in your country. Let them check keyboard and keyboard controller using diagnostic tools. They can tell you what the problem is and how to fix it.

  • Satellite P300 - Multimedia Board not lighting up

    Hi All
    I have a Satellite P300-172 and the Multimedia Buttons above the keyboard dont light up/work anymore after motherboard replacement. The first time I switched the laptop on I had left the cable unplugged, it's plugged in securely now and they still dont work.
    I have tried doing a hard reset, uninstalling/reinstalling VAP and updating the BIOS.
    Any other suggestions to try?
    Cheers

    Hi,
    I did replace it myself, but I'm reasonably well versed in laptop repair.
    There's only one cable that runs from the multimedia button board and that's the one connected to the mobo, I've plugged it in a couple of times with no luck. I did a quick sweep of the other cables anyway, but they seem to be fine. (everything else works as well)
    There is an Illumination Setting in the BIOS, switching it off turns the power and touchpad illuminations off, but when you turn it back on the Multimedia buttons dont come back on :(

  • Failure to turn Satellite P300 off

    When I try to turn off my notebook (Satellite P300 with Windows Vista Home), i.e. to complete the session and remove power, the notebook reboots rather than turns off.
    How can I correct this defect?

    Satellite P300 is not the newest notebook model and I presume you got it for a while?
    Since when you have noticed this issue?
    Have you installed some Microsoft updates before this starts to happen?
    Try to define power button as switch notebook off and test if the same will happen again.

  • Satellite P300 - blank screen since turned on, but sometimes working fine

    Helo,
    I have a Toshiba Satellite P300-1F0.
    The display is blank when I turn it on, even on the boot up screen, and I cant hear the startup windows sounds.
    Although if I turn it on and off, it will work after some tries, sometimes it works on the first try, some others I have to turn it on and off like 20 times before he finaly starts working. When it turns on it works perfectly.
    I tried:
    pressing the power button for 1 min while charger and battery out,
    Checking manually the ram.
    reinstalling and updating monitor and graphics card drivers.
    shaking the lid to check if there is a cable broken
    but none of these actions worked
    I also noticed that the computer works with a external monitor (TV) connected via hdmi.
    If i turn the laptop on, the screen is blank, and no windows sounds played, and after some minutes I plug in the hdmi cable, the Tv shows that windows was on, and sounds start to work from there.
    While connected to the TV, I try to turn the display on by pressing (windws key+P) but it doesnt work.
    In Screen resolution menu, windows cant detect the display, only the TV
    Can anyone help me? what can be thr source of the problem?
    Any soluction?
    Thank you for your Time,
    Adriano

    As I can see you have started two identical threads. The second one is non http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=287272
    Please continue discussion on first thread.

Maybe you are looking for

  • Error message when trying to download updates

    Adobe Illustrator CS6 Update (version 16.2.1) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 DPS Desktop Tools CS6 2.06.2 Update There was an error installing this update. Please quit and try again l

  • Attaching a GIF image

    Hi all,        Does anyone know how to attach a gif image to a  email.I am working in APO-ABAP. Regards Ahasan

  • Can I print to a Non PS printer from my MacBook ?

    I've got the usual issue where I'm on a PC network with printers that are not PS and I have problems printing to any of them unless they are PS enabled. I've tried different drivers etc and can of course setup the printer and attach a PPD but nothing

  • Bonjour Services for Airserver isnt being recognized on my new PC Laptop running Windows 8.  Does anyone have any solution for this

    I am having trouble with Airserver not finding Bonjour or Windows  I have installed and repaired Bonjour and it still does ot reconize it. error message is AirServer requires Apple Bonjour to provide automatic discovery of your PC. Apple Bonjour can

  • SCXI-1122 Thermocouple System

    I have thermocouples hooked into a SCXI-1122 module. Using virtual channels in MAX, I am able to see all the voltages correctly. Also, by specifying each individual thermocouple in LabView (e.g. ob0! sc1! md4! 1) I am able to see the voltages correct