Satellite P300 and XP - some drivers problems

Hi there,
My notebook: Toshiba Satellite P300 PSPC4E!
I switched from Windows Vista (preinstalled) to Windows XP Pro SERVICE PACK 2, but I got a few drivers problems:
1. USB-ROOT-DRIVERS cannot be installed.
Yep this doesn't work. Can't use any USB-Stick and stuff. I installed all drivers from the download page for my Notebook and Win XP for sure.
2. Mass Storage Drivers cant be installed:
Errormassage:
"This Computer doesn't have the Requirements to install this Software (translated)"
3. No WLAN Drivers from the Driver page work :(
Thanks for now. Would be nice to get some help.
Cheers

> Installed Win XP without SATA drivers, but changed the SATA value in the BIOS to compatibility! Can I update the SATA drivers now? (xp is installed)
No you cannot install the SATA drivers now because the HDD doesnt run in SATA mode. You changed it in BIOS to compatibility!
And now; if you would change the mode to SATA then you will get a BSOD and you will have to install XP again. So if SATA is set to compatibility mode -> you dont need to install the SATA drivers
> There is no WLan hardware found. Nothing :/
Check this Toshiba WLan page;
http://aps2.toshiba-tro.de/wlan/
Maybe one of the available WLan drivers will help you

Similar Messages

Satellite P300 -156 Windows 7 Crash Problem

Hello,
I have the Toshiba Satellite P300-156 PSPC4E model, and i have had this laptop for a couple of years now.
Before installing windows 7 i had the default Windows Vista installed, and it worked fine.
Now since installing windows 7, ANY game i try and play just causes the laptop to just go black screen and shut down after about 5 - 10 minutes of playing.
I thought this was due to an overheating issue... so i opened the laptop and cleaned it all out, and then put it back together again.
(YES i have checked all wires are back in where they should be and all components are working properly)
This didn't work.
Then i tried updating all my drivers, and software ect.
Still nothing.
I've trawled through pages and pages of search results for the same problems with Windows 7 and game crashing... but nobody seems to know how to fix it.
I thought it was just windows 7, but i re installed windows vista and it's still doing the same thing on there now.
I've tried installing all the drivers from toshibas website for this model laptop and no luck.
My windows vista and windows 7 are both genuine copys.
All the hardware is working normally (as far as im aware) and i really can't see what can be causing this problem.
If anyone could give me some advice on what to do it would be greatly appreciated.
Thanks,

Hi
Which display driver you are using? Im not P300 owner but on my A300 I had a similar issue that the notebook crashed during playing a game. It seems that the reason was a 3rd party driver or lets say the driver from the graphic chip manufacture directly. I think because they are not pretested on the notebook and causing overheating
So I would recommend installing the latest display driver from the Toshiba website.
Last but not least which Windows 7 version (32 or 64bit) you have installed and which BIOS version?
The Toshiba website shows also new BIOS versions and different versions for 32bit and 64bit OS. Maybe you have to update/change it Who knows?!

Satellite P300 and Windows 7 Beta..

Hey guys..
I updated the horrible Vista that my P300 came with to the new Windows 7 beta.. Most of the features are working correctly.
Here are the problems i ran into.
*HDMI* - it does work, but i lose audio via HDMI if i pause a video. If i'm on youtube and i watch a video the audio will be fine until i either pause it, rewind or fast forward the video, if i click on another video it will also stop working. This goes for any sort of video i watch on the pc.. not just youtube.. even DVD's.
To get the audio via HDMI again, i need to go to audio devices and select pc speakers as default, then chose HDMI as default again.. then it will work until i pause or skip videos again.
*Wireless Card..*
If the P300 goes into sleep mode, sometimes i will not be able to re-connect to the wireless network again. I need to reboot the P300 to get it to connect again.
I also have 4 or 5 items in the device manager that are not installed properly.. i cant list them now cause i dont have my laptop with me.
Anyone else running Windows 7 Beta?? If so do you have any issues?

Hello
We all know that Windows 7 is still as beta version on the market and official support is not started.
So to discuss about some issues on Windows 7 is for me definitely superfluously.
The drivers, tools and utilities are not available yet and if everything works well it OK, if not we must wait until Windows 7 support starts.
I have installed Windows 7 on my Satellite Pro P300 and play a little bit with it but I am not wondering if something wont work as it should.

Satellite X200-23G - Need some drivers for Windows 7

Hello buddy !!
In first place, I'm Brazilian and I have some dificulties to speak in engilsh.
Let's to go to the problem:
I had been installed Windows 7 Ultimate here in my Satellite X200-23g (PSPBUE), but, I'm not find some drivers. Are the drivers: Video Card, Biometric Coprocessor, PCI Memory and Storage Massive.
I hope that can someone helps me.
For now, thanks for everyone !!!

Hi buddy,
All drivers can be downloaded on the Toshiba website:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
I have checked the page and it seems that for Windows 7 are no drivers available. I think its why Satellite X200 is pretty old.
But from my own experience I can say that the most Vista drivers are also work on Windows 7. You should check this too! ;)

Which Satellite P300 and P200 have a second HDD connector?

Hi.
Does anyone know which Satellite P200 and P300 laptops have 2 HDD connectors installed?
Thanks.

Hi CrazyHorse
You are right not all model which are equipped with two HDD bays support two HDD connectors.
But I found some P300 which support the second HDD:
Google is your friend :D
P300-10H
P300-10Y
P300-126
P300-128
P300-13E
P300-142
P300-14J
P300-150
P300-15D
P300-167
P300-174
P300-17C
P300-185
P300-186
P300-18B
P300-18M
P300-193
P300-19A
P300-19F
P300-19M
P300-19Y
P300-1A2
P300-1AH
P300-1AN
P300-1AO
P300-1BB
P300-1C8
P300-1C9
P300-1CE
P300-1D7
P300-1DM
P300-1E7
P300-1FM
P300-1GB
P300-1GH
P300-1GI
P300-1GO
P300-1GU
P300-1H0
P300-202
P300-206
P300-20R
P300-20W
Cheers

VT with Satellite P300 and Intel Core 2 Duo T5750

Hello there,
i recently bought a new Satellite P300 Notebook to be able to work with virtualisation technics. Unfortuanately, there is no "VT"-mark in the bios. Is there any possibility to activate the "VT"-Technology? I know that there are many posts about this topic, but they aren't very helpfull, because i already looked up my processor and intel says that it is "VT" capable...
Thanks a lot for your answers :-)

I started working as a Computer Technician about 4 weeks ago and this notebook was the cheapest way to try different systems (because it's quick enough!). The company i work for has many different clients who have very many different systems (also 64bit systems) so i wanted to use virtual machines to evaluate different problems... And without VT enabled a can't evaluate a 64bit virtual machine... So, if you are right (what i do think) then i've got a good notebook which is only good for "normal" business or homeuse... But thank you very much for your answer!

A Full DTP is converted into delta DTP and facing some data problem

Recently Full DTP(DSO to DSO) is converted into delta DTP , we are facing some data problem in first request.Some data in D2 are not updated properly after just converted in full to delta. Please let me know if you have any idea.
Example :
DSO : D1
DSO : D2
Previously FULL DTP D1->D2
Now Delta DTP D1->D2

Hi,
First time run of delta DTP will extract all the records from the source...
As u have already run the Full load and followed by delta,i guess u can use direct change log option...
rgds,

G510 and r5 m230 drivers problem.

Hello
i have lenovo g510. i bought it with no OS and i instaled win7, after instaling all drivers for win7 expect 5.2 intel video driver because its says:
this computer does not meet the minimum requirements for installing the software
from lenovos site, i can see in device manager that r5 m230 is not working properly:
Windows has stopped this device because it has reported problems. (Code 43)
and standard VGA graphics adapter is working fine, how to make r5 m230 work fine too ?
i have i3-4100m
PCI\VEN_8086&DEV_0416&SUBSYS_380B17AA&REV_06
PCI\VEN_1002&DEV_6665&SUBSYS_380B17AA&REV_00
also i can find drivers for
PCI\VEN_8086&DEV_8C31&SUBSYS_397817AA&REV_05
USB\VID_0BDA&PID_0129&REV_3960
P.S
is there driver package which contains all drivers for win7 like i have one for win8.1 ?

mikesz555 wrote:
PCI\VEN_8086&DEV_0416&SUBSYS_380B17AA&REV_06
PCI\VEN_1002&DEV_6665&SUBSYS_380B17AA&REV_00
also i can find drivers for
PCI\VEN_8086&DEV_8C31&SUBSYS_397817AA&REV_05
USB\VID_0BDA&PID_0129&REV_3960
P.S
is there driver package which contains all drivers for win7 like i have one for win8.1 ?
Good day and welcome to the community.
In case you don't have it, for reference here is your model's support site:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g510-no...
Using http://www.pcidatabase.com I see a couple possibilities for you.
VEN_8086&DEV_0416 looks like Intel HD Graphics. There's a Win7 driver at the link above.
VEN_1002&DEV_6665 isn't so clear. The vendor is AMD, but the device comes up empty.
VEN_8086&DEV_8C31 looks like Intel USB 3.0. There's also a Win7 driver for that at the link above.
I'm unsure about the final item, though, sorry. As yigit suggests, possibly searching the forum for parts of the text may turn up some clues.
Hope this helps a bit.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Satellite A300 and Windows 7 drivers

Hi
Is anybody know, when or if actually will be a drivers operative for Windows Seven for this laptop????

Hey buddy
Are you sure that you want to use Windows 7?
Dont forget that Windows 7 is only a beta version and it could include a lot of problems or something else.
I think the better solution would be Windows Vista or the older XP.
However, try to use the Windows Vista drivers that you can find on the Toshiba website or you search on external websites for drivers.
Good luck! ;)
Greets

Satellite P200D and Vista x64 drivers

Hello,
I recently added to my satellite P200D-11L 4gb of ram.
Because the 32bit OS doesn't recognise 4gb of ram i decided to switch to 64-bit hoping that Toshiba promotes Vista and of course the spread of 64 bit systems.
I am very dissapointed that i cant install toshiba value added package and for that reason a lot of my laptops fuctions are not available.In addition to that my laptop crashes if i put it to sleep.
I searched the forum and i found out that Bios is responsible for the value added package and that Bios is the reason of the error message i get every time.
I tried to update my Bios only to find out that its not yet updated by Toshiba to support the 64 bit VAP.
My point is: are they going to make it work at last? They just promise stuff before you buy but support of software stops after a few months of laptop release. Especially for the P220D series.
Does anyone know anything?
help please.

You want a detailed instruction?
As I said the 32bit VAP must be installed.
Then go to the installed VAP folder, replace the old 32bit dll file with this new downloaded 64bit dll file and enjoy!
The 64bit VAP contains 3 files; tvalz_o.cat, TVALZ_O.INF and TVALZ_O.sys.
Copy these files into the same place where the 32bit files are placed!!
By the way; You have installed Vista Ultimate version. I remember that sometimes Ultimate Vista is not fully compatible with some Toshiba tools; i.e VAP

Hooked up my external drive and having some major problems??

So I put my info from my pc onto my new external drive and then plugged it in to my mac (usb) It reads it just fine and I can pull info off it . . .
But, I cannot put anything on it (claims the drive is "read only") and I cannot delete anything off of it (I don't have the right permissions)
So what is the problem here?
I don't recall how i formatted the drive but i did do it with my PC. I am wondering if mac can't write to fat32 or ntfs or something like that.
Any thoughts are appreciated. I am using a hitachi drive in an ADS 835 enclosure.
By the way, where and how do you set "permissions"?
Kal

Sorry for being too late. You will not have any permission problems after reformat.
I hope it works now... I am using an external 60 GB VFAT drive without a problem with my ibook.
haris

Satellite A305D-S6835 - Need some drivers for Windows 7 32bit

I installed Windows 7 (32-bit) on my machine, everything is recognized, except 2 devices! I do not know what could it be, because in "device manager" write "base system device"! I tried to update it from device manager, but I had not luck!
If someone knows what is this, please help!

Hey,
Well, I think nobody can say exactly what drivers you need if you dont post detailed information about these unknown devices.
First of all you should identify them. Therefore you must check the vendor and device ID as you can read in following article:
[How to identify an unknown device (e.g. Wireless LAN module)? |http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]
All drivers can be downloaded here:
http://www.csd.toshiba.com

Satellite P300 - Keyboard layout changed

Well, I am running a Toshiba Satellite P300 and I am having problem.
I just got it back from repair and they changed the motherboard. I have updated the BIOS. I did a fresh OS install to Windows 7 that. I didn't have this problem before it went out for repair but now when I press the Num Lock key, it changes my number pad to numbers, as expected, but also changes the right side of my keyboard to numbers as well which is very frustrating.
I have been surfing for 2 days online to find a solution to it and even called the tech that was in charge of the repair and no one has any answers for me.
And another problem after repair : without Model Name ,Part Nr and Serial Nr
[PC Information|http://forums.computers.toshiba-europe.com/forums/]
*Model Name* yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
*Part Number* yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
*Serial* Number None
OS Version Microsoft Windows 7 Ultimate 6.1.7600
BIOS Version V3.30
CPU AMD Turion(tm) X2 Dual-Core Mobile RM-70
Physical Memory 4096MB RAM
Hard Disk Capacity 449,892,560,896 [Byte|http://forums.computers.toshiba-europe.com/forums/] 418.995 [GB|http://forums.computers.toshiba-europe.com/forums/]
Hard Disk Free Space Capacity 147,790,635,008 [Byte|http://forums.computers.toshiba-europe.com/forums/] 137.641 [GB|http://forums.computers.toshiba-europe.com/forums/]
Video ATI Mobility Radeon HD 3650 version=8.634.1.0
Screen Resolution 1440 x 900 Pixels
Color Quality True Color (32 Bit)
Sound High Definition Audio Device version=6.1.7600.16385
High Definition Audio Device version=6.1.7600.16385
Network Atheros AR9281 Wireless Network Adapter version=8.0.0.325 MAC Address=00:21:63:61:13:EC
Modem HDAUDIO Soft Data Fax Modem with SmartCP version=7.68.0.50
Internet Explorer 8.0.7600.16385
IDE Device TOSHIBA MK2552GSX ATA Device
GDAN ENGD67O5IR85 SCSI CdRom Device FW version=3.5Z
HL-DT-ST DVDRAM GSA-T50N ATA Device FW version=RT03

So far it looks like W7 has the correct driver and the external keyboard has its key presses correctly processed.
Next?
When you press num lock on the external keyboard does it also toggle the alpha keys on the keyboard to numerics? - Trying to establish if the key code from the external k/b is the same as that generated by num lock on the laptop. Your laptop is behaving as if it is a laptop with no numeric key pad and you can toggle between "numbers or text". I've had a search and can find no "shortcut" keystrokes to do that - I also searched to see if a "Shift Lock" could be emulated since that is a key that has disappeared from modern keyboards.
I presume you have checked that your BIOS is the current version. The only other suggestion I've got is that the replacement m/b has not had Toshiba "lock outs" applied and it is in a generic bios state and you can access settings such as the number of keys on the keyboard or legacy keyboard support. Suggest you identify some "small" Toshiba laptops with no numeric keypad and download their manuals to see how they handle no numeric keypad or just ring Toshiba and ask them?
Message was edited by: peterk_1
With your laptop num lock on when you hold "Fn" and press one of the remapped keys do you get a letter? (add the shift key and get a capital) if so it's behaving like a Satellite L450D-11X (fn+f11 is the numeric toggle on that machine)

Satellite P300-1FN: CD/DVD drive issue - cannot read game DVD

Hi,
My brand new Satellite P300-1FN loaded some software ok using DVD drive but now when I put any disc in it doesn't auto run but the disc seems to run up and then a pop up window informs me after going Computer -> DVD drive to get access - Burn a Disc and wants to format.
The discs I am putting in are game DVD and other software to load but they all give the same pop up window.
DVD drive isTSST CDDVDW-TS-L633A
Can you help?

Enter Control panel > "Auto play" and define what should happen if you insert Software and games media.

Satellite P300 - keypad going crazy

Hi !
I have a Satellite P300, and my main board broke weeks ago.
I picked it back this morning, but since the reparation, I have a little bit of a problem :
The keyboard has a separate keypad, which a can activate/inactivate with the Num Lock key.
When the num lock is activated (green LED on), pressing the keypad gives me number ; but a part of my alphabetic keybord also gives me number (keys : u, i, o, p, j, k, l, m, ...).
This part of the keyboard is supposed to be a keypad that can be switched on with the Fn key.
As long as I don't have any Fn + key combination, I cannot turn this function off.
The only way for me to use my keypad is to turn it on when I need it, and off right after I used it...
Does someone have a solution ???
Thanks

Hi!
I agree with Mores. You should contact an ASP and ask a technician for help.
They have experience with this.
On the Toshiba website you can search for an ASP:
http://eu.computers.toshiba-europe.com => Support & Downloads => Find an authorized service provider
Bye

Satellite P300 and XP - some drivers problems

Similar Messages

Maybe you are looking for