Satellite P300 - blank screen since turned on, but sometimes working fine

Helo,
I have a Toshiba Satellite P300-1F0.
The display is blank when I turn it on, even on the boot up screen, and I cant hear the startup windows sounds.
Although if I turn it on and off, it will work after some tries, sometimes it works on the first try, some others I have to turn it on and off like 20 times before he finaly starts working. When it turns on it works perfectly.
I tried:
pressing the power button for 1 min while charger and battery out,
Checking manually the ram.
reinstalling and updating monitor and graphics card drivers.
shaking the lid to check if there is a cable broken
but none of these actions worked
I also noticed that the computer works with a external monitor (TV) connected via hdmi.
If i turn the laptop on, the screen is blank, and no windows sounds played, and after some minutes I plug in the hdmi cable, the Tv shows that windows was on, and sounds start to work from there.
While connected to the TV, I try to turn the display on by pressing (windws key+P) but it doesnt work.
In Screen resolution menu, windows cant detect the display, only the TV
Can anyone help me? what can be thr source of the problem?
Any soluction?
Thank you for your Time,
Adriano

As I can see you have started two identical threads. The second one is non http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=287272
Please continue discussion on first thread.

Similar Messages

  • IPad 2's screen wont turn on, but touch works fine, and the iPad still works with a projector.

    One of my teachers came to me for help today. Her iPad 2 works fine except for one thing. The display won't turn on. We know the iPad still works, as when we connect it to a projector via VGA, the iPad's screen shows up through the projector, and we can navigate through the ipad using touch on the iPad's digitizer.
    Restoring the iPad didn't help, so I'd like to know if there's a simple fix for this, or if we should take this to the Apple Store.
    If we have to the apple store, how much would it cost for someone from the genius bar to fix it? The iPad's warranty has expired.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
    Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
    Out-of-Warranty Service
         If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)   
    iPad model    Out-of-Warranty Service Fee
    iPad mini    $219
    iPad 3rd, 4th generation    $299
    iPad 2, iPad    $249
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
    You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
    iCracked - Broken iPhone, iPod or iPad
    http://www.icracked.com/
    iReVamp Electronics Screen Repair ($99)
    http://www.irevampelectronics.com/ipad-2-broken-glass-screen-repair.html
    iPad Repair & Screen Replacement Services
    http://www.ifixyouri.com/16-ipad-repairs
    RepairZoom iPad Repair
    http://www.repairzoom.com/ipad-repair.html
    Mission Repair
    http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
    iGadgetResQ
    http://www.igadgetresq.com/ipad-repair/
    Do It Yourself iPad Reapir
    http://www.ifixit.com/Device/iPad
     Cheers, Tom

  • My Daugther went to a local Church fair and she had her iPod touch and it flew out but the screen didn't crack the ear jack is dent and the screen is popping out , But it works fine . Can the apple store change it or fix it?

    Thanks , to anybody that answers

    They will just exchange it ($149 for latest 8G model) for a rebuilt one--they won't repair that. Make sure you back it up before you take it in.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Since upgrading to ios7 my message screen is blank.I am neither able to seee,send or recieve messages. I upgraded my iPad at the same time but messaging works fine. Anyone else have this problem? Any suggestions?

    Since upgrading to ios7 my message screen is blank.I am neither able to seee,send or recieve messages. I upgraded my iPad at the same time but messaging works fine. Anyone else have this problem? Any suggestions?

    I have been researching the exchange message loss  problem on other forums, but not seen a link to browser as yet.  The message loss problem we have here is in a 32bit PB.

  • Iphone 5 got wet last week.  Been in rice until today.  It turned on and worked fine, I could see a water spot in the middle but still worked fine, 3 hours in it shut off to black screen with apple logo.  Any ideas what to do?

    Iphone 5 got wet last week.  Been in rice until today.  It turned on and worked fine, I could see a water spot in the middle but still worked fine, 3 hours in it shut down to the black screen with apple logo.  Screen stays up for 10 seconds ago and then goes black and then black screen with apple logo comes back.  Any ideas what to do?

    At this point it's likely that the iPhone has suffered damage and you'll have to take or send it to Apple for replacement. If you have AppleCare+ coverage on the iPhone, the cost will be US $49. Otherwise the cost will be US $229.
    Regards.

  • My screen wont turn on, and the screen is black. It was working fine, but then it just turned off. The only way it will work is if I close my laptop, and pinch the two screens together

    My screen wont turn on, and the screen is black. It was working fine, but then it just turned off. The only way it will work is if I close my laptop, and pinch the two screens together

    You have a hardware problem and you should take it into a apple store to be looked at and fixed.

  • Satellite C660 - Blank screen - No output - External monitor OK

    I recently bought a C660 from ebay as a non-working repair project, listed as having no output to the LED screen but working ok on an external monitor.
    After stripping it down, I found that the 40 pin connector to the LED panel had 3 damaged pins on the left side, so assuming that was the issue, I got another cable and rebuilt it. However, still no output to the LED panel, but all working fine on an external monitor.
    As I have a spare new panel in stock, the next move was to replace the LED panel - still no output, except to the external monitor.
    I have checked the setting for the video output (Fn+F5) and it is no different on any setting.
    I have seen a couple of threads on here where people are having issues with no video output after a BIOS update (however I do not know if this has been done or not in this case).
    Does anyone have any ideas as to what else I could check for to see what the problem might be?
    Any help greatly appreciated.

    >I have seen a couple of threads on here where people are having issues with no video output after a BIOS update (however I do not know if this has been done or not in this case).
    If BIOS update fails, the unit would not power up and this results in black screen but this has nothing to do with your issue. The external monitor works properly so BIOS is OK.
    Your issue is related to faulty internal display or the connection between the display and motherboard.
    Both should be checked!

  • What does it mean if my location services are turned on, but not working?

    What does it mean if my location services are turned on, but not working?  It has always worked before.  It is turned on in Settings but when I try to use an app that requires location services, it says they are not on, and the little arrow is not appearing at the top of the screen.

    thank you...I tried this immediately after noticing but to no avail. I thought the phone died but I kept seeing the light on so I googled some things and it says it may be watered damaged and I'm not sure how.

  • HT4600 i Get a solid amber light sometimes, bUT all works fine. I have to unplug the airport extreme to reset it and then it turns green and starys that way for a week or so and then turns back to amber. why is this and how do i fix it ?

    I gat a solid amber light once a week on my airport extreme, but all works fine. I have to unplug it to reset it and then the light turns back to green and it is good for another week and then it happens again. why is this and what can i do to fix it ?

    Solid amber on an AirPort Extreme is an indication that the internal power supply is starting to act up.
    If the AirPort Extreme is in warranty, it shouid be exchanged for another AirPort Extreme.
    If the AirPort Extreme is several years old, keep any eye on things. When/if you find that you are having to reset the device several times a week, it's time to start thinking about a replacement device, as the end is near.

  • I am having alot of trouble i want to use imessage but everytime i turn it on it turns on but doesnt work and it says verifying but its verifying my old number and i need it to verify my new number but it wont let me

    i am having alot of trouble i want to use imessage but everytime i turn it on it turns on but doesnt work and it says verifying but its verifying my old number and i need it to verify my new number but it wont let me

    You can likely download the last compatible version by:
    Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
    App Store: Downloading Older Versions of Apps on iOS - Apple Club
    App Store: Install the latest compatible version of an app
    You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

  • HT201263 Drove over I Phone 5.   Screen is completely gone but phone works to call out,  I have replaced phone with a new phone but would like to save or transfer remaining photos and contact information on "crushed iP"  Can you help!

    Accidently drove over Iphone 5.   Screen is completely gone but phone works to call out via SIRI.   Of course I cannot download to itunes as I have a passcode lock.   Would like to save my information, contacts and photos.   Any help or ideas would help!!!

    Welcome to the Support Communities. This Apple doc may be of interest:
    Channel Member Code of Conduct
    Kings74 wrote:
    They told my friend that the phone was not available in Black, that was the 5, and that the 5s was only available in silver and gold..
    A minor point, but it may avoid a little confusion if, instead of saying "black" in reference to the iPhone 5s, say "space gray":
    "iPhone 5s — Available in silver, gold, and space gray" (Source)

  • HT4113 So I got the ipad for christmas, turned it on & it worked fine. Later I entered a passcode. Now I can remember the passcode & the ipad is locked for 60 mins. The ipad was never configured to a computer at the beginning. someone help.

    So I got the ipad for christmas, turned it on & it worked fine. Later I entered a passcode. Now I can remember the passcode & the ipad is locked for 60 mins. The ipad was never configured to a computer at the beginning. someone help.

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.

  • I have a slight crack in my mac book pro screen it is just on the top of the screen and the LCD display is working fine. i was wondering how much it would cost to fix it/ replace it.

    i have a slight crack in my mac book pro screen it is just on the top of the screen and the LCD display is working fine. i was wondering how much it would cost to fix it/ replace it. it is not a pressing matter but if it is cheep to fix then i would like to do so

    Most of us wouldn't know that here. Call your Apple Store.

  • My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router

    My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router.. Any idea how to fix this?

    Hello Rattisate,
    Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro.  I would be concerned about this too.  You can find information on how to troubleshoot this in the following article:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • ITunes wont download the restoring software for my itouch it gets finished and gives me an error message that says the network conection timed out but it works fine what do i do?

    i tunes wont download itouch restoring sotware it gets finished and gives me an error message saying the network conection timed out but its working fine what do i do?

    I have this same problem, i though it was my internet (super slow) it would take 3 HOURS!! to download the update and then after all the waiting, it would say "network connection timed out" Ive restarted it and checked my settings over and over but it still says "timed out" wat should I do?!?

Maybe you are looking for

  • Leaking instances of NonPlsqlTTCDataSet ?

    I am memory profiling our application and getting some suspicious results. It may or may not be ok - please advise. We use connection pooling and it looks like OracleConnection keeps storing NonPlsqlTTCDataSet classes without releasing them. They see

  • Any ideas on a filter to add water ripples to a font?

    Any ideas on a filter to add water ripples to a font? this is the example: http://logofaves.com/wp-content/uploads/2009/07/loc-m.jpg thanks in advance!

  • Scheduling tasks created in Oracle Projects

    Is it possible to use Advanced Scheduler/Field Service to schedule tasks created in Oracle Projects? How can I achieve this integration?

  • Can't import adobe functions from IE8 to firefox

    don't know what else you need. the adobe flash player and other adobe functions did not transfer over to firefox from IE8

  • Trouble with restored disk after HD failure

    My HD failed and I restored it using a backup from time machine (complete reinstall using the CD) Now, when I move something to the trash it asks for my password. When I move folders the changes don't stay made when the machine is restarted. So far I