Satellite P35-S6112 - No sound after Windows 7 installation

I installed Windows 7 on this Satellite P35-S6112 with a Realtek AC97 sound card in it. The card and drivers are working but there is no volume. I can hear sound with a headset very faint. I have uninstalled, reinstalled, attempted update but I have the current drivers installed.
Troubleshooting has been done and system reports no issues. I am in desparate need of help here as my daughter needs this for her college as her other notebook is in the shop. Any help is greatly appreciated!!

I have checked US support page and this old notebook is not supported for WIN7 so Im glad to hear you have installed Win7 successfully.
If the sound card driver is installed properly I dont understand what do you mean with there is no volume. Can you use speakers symbol in task bar and change speakers sound level?
Click also on speakers symbol and open Playback devices. Can you set Speakers to be default device?
Which OS have you used before Win7 installation? Have you noticed the same problem?

Similar Messages

Satellite Pro U200 - No sound after Windows 7 installation

Hi,
I'm having a problem with the sound after installing Windows 7 on a Satelite Pro U200 (PLUA1E). No Win7 sound driver found on the Nordic driver website. Please help.
G.Magnason

Hi buddy,
Have you already checked the Toshiba website itself?
http://eu.computers.toshiba-europe.com
I found a sound driver for Vista 32bit and the most Vista drivers also work on Windows 7 so its worth a try!!! :)

Satellite P100-429 - No sound after Windows 7 installation

I have a Satellite P100-429 Purchased Nov 2006.
I have just upgraded from XP to Windows 7 and Office Pro Plus. All works well but there is no sound if I try to play a CD. I have done usual checks for Mute etc. but no Joy. In device manager a yellow triangle with exclamation mark within is against my sound device. C
an I download a new driver to solve problem or is it more complicated than that? Than you

Hello
For me it sounds like that you didnt install the sound driver for sound card
According the Toshiba website there is no 64bit sound driver available for Satellite P100 but I noticed that Satellite P300 supports Windows 7 64bit and has Conexant sound card too. Maybe this driver is working for you too.
Just search for Satellite P300 drivers and test the sound driver It should work! :)

Satellite A200-20H - No sound after Windows 7 installation

Hey Guys.
I have just bought this computer from a mate, and I have decided to install Windows 7 on the machine. Everything seemed to work brilliant, until I wanted to try and play some sound. There is no sound what so ever on the laptop, all the sliders are at max, I have tried pushing FN+ESC whit no difference. I have tried reinstalling and updating soundcard driver, no luck either.
I found a "soloution" which said I should install Value Added package, and then run an app, which should unmute the PC, no luck there either..
So I am starting to run out of ideas?
So I am hopeing one of you clever guys in here has a soloution.
If you need any info from the computer, just ask for them and i will reply whit them as soon as possible.
Big thanks in advance
Kim Jensen

Well thx for the soloution, well an attempt to a soloution as the sound is still missing.. I did a total reinstall again.. I installed the Value pack as the article told me, and i ran the sound utillity program.. Still there is no sound..
I have just tried putting some headphones in the computer, to see if sound would come out of those. That didn work either...
Any ohter good ideas? =)

Upgraded my macbook pro to mountain lion. But during windows installation, it refuses coz of FAT file system. Also is it possible to partition after windows installation???

I just upgraded my macbook pro to mountain lion. Now I want to install windows, but during installation using bootcamp, it says windows can't install on FAT partition. I couldn't change it to NTFS. Also how can I partition my hard disk after windows installation. Coz before windows installation, if I partition hard disk, it won't allow me to install windows saying startup disk can't be partitioned.......help would be appreciated.
Thanks

bkchoo wrote:
Now, I wish to upgrade from Mountain Lion 10.8.5 to latest version of OS X Yosemite, but I am in doubt and worry if after upgraded to Yosemite, can I still using my Windows XP where I installed now in Mountain Lion 10.8.5 BootCamp?
Yosemite does not allow a new installation of XP, but an existing XP installation is self-contained and will continue to work. Does your XP installation use a FAT partition? You may be better off using NTFS and then upgrading to Yosemite.
Will the Yosemite upgrade process delete my Windows XP partition or crash my current BootCamp? Can I still have an option to load OS X or Windows XP (press 'alt/option' key during boot up) after upgraded to Yosemite?
If you have made any re-sizing attempts to WXP partition Yosemite will cause problems, otherwise the Yosemite upgrade leaves XP untouched.
Are there any specific reasons to upgrade to Yosemite?

Satellite C55-A5182 - Screen flickering after windows 10 upgrade.

Satellite C55-A5182: screen flickers after windows 10 upgrade....help!!!

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and I understand that you are having an issue with the Touchscreen on your HP Notebook - 15-ac020nr. You had mentioned that since your Windows 10 Upgrade, it no longer works. Have you tried doing all updates (Windows, HP Support Assistant, BIOS)?Have you tried restarting the Notebook a couple of times?Have you tried to run the Windows Troubleshooter? Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The HP Support Assistant will also help find a proper driver for you to use. Updated Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product. They will be released as they become available to HP. I did find a troubleshooting document for you called Touch Screen Issues. Although it does say it is for Windows 8, it will still work for Windows 10. Please follow the provided troubleshooting steps and re-post with the results. Have a great day!

Lack of sound after Window 7 (64) installation into iMac OX 10.6.7. Tried to install driver from Snow Lepard disc (Cirrus 64).Wizard installed driver. No sound, Device Manager indicated that "driver is not installed" but also that the"device is working"

I don't know how to proceed. I didn't have sound after installing Windows 7 inot iMac OX 10.6.7 (64bit) After unsuccessful attempt to upgrade the driver from the BootCamp file, I deleted the driver from the Sound and Game controlled hoping that I would allow me to automatically install the correct driver from Boot camp.
Now the Sound Video Game controller disappeared from the Device Manager
How can I find out which is the correct sound driver for my computer (The Speaker Properties only say:WIndows)?
How can I install it without seing the Sound and Game controller in the Device Manager?

When you say "manually download", you mean from the BootCamp File on Snow Leopard, or from the Internet.
My additional problem is that the "Sound and Video Game Controller" disappeared from the Device Manager when I removed the previous driver. I don't find the place where I can reistall the new driver.

Satellite A120: No sound after Vista installation

Hi,
I've been handed a second laptop by work - so am unsure if the sound ever worked but..
1) I've installed Vista Business Edition
2) No sound from either the headphone jack or speakers
3) No errors in the Windows Device Manager
- ReInstalled the Realtek drivers from the tosh drivers site
- <still no sound>
Ran windows update
- <still no sound>
- When playing a sound file the graphic equaliser appears normally - i.e. bouncing up and down with the beat
Now out of ideas!!
Thanks in advance!

Hi buddy
I think I know what the problem could be.
The sound must be put as high as possible before install of Vista!
Furthermore you should check if the sound was not muted runig the previous OS!
This could affect the sound on the new installed Vista OS!!!
I have searched a little bit on the different Toshiba websites and in the knowledge central and found this useful article regarding the sound issues running Vista OS
[Sound Utility to Turn Mute Off |http://support.toshiba.com/support/viewContentDetail?contentId=1671893&pf=true]
I would appreciate some feedback from you
Regards

No sound after Windows XP reinstall

# Hello Everyone,
I reinstalled Windows XP and now my sound isn't working. I have all the drivers installed, the card is acti've and shows as working in the Device Manager. When I start the computer, I get the Windows sound when Windows loads, at least the first couple of seconds of it, then it stops and no more sound. Any help will be appreciated.

' Rognarok,
. In Control Panel, Sound and Audio Devices, Audio tab, is your Soundblaster selected as the default Recording and Playback device? Also, you may want to place a check in the box next to "Use only default devices."
2. In Control Panel, Administrati've Tools, click on Services. Make sure Windows Audio is started and set to Automatic.

No Sound after clean installation of windows 7 from Vista

I had a problem with vista on my Hp dv6809wm laptop. My sound driver kept deleting itself and when I would do a system recovery it suddely worked again, but only for a short while. Eventually it stopped working entirely. Then my next step was an HP driver recovery, which also worked a couple times but then stopped. After a couple weeks I decided to purchase Windows 7 through my school and do a "clean" installation to wipe out everything and start fresh. Well when I finally got done, my sound still doesnt work, and im still getting the red x over the sound icon, I have no sound driver. HP support has no sound drivers for my computer for windows 7 or HP, only 3 for vista, I have tried them all and I get different error messages each time, usually saying driver not found (isnt that the point of downloading it?) or it will say cannot find media something. I have no idea what to do. Please help

There is posibilily for hardware problem, broken sound chip in particular.
Backup all of your data and try HP system recovery, choose factory installed setting.
It will restored all software and drivers as "new" condition.
If it does not fix the sound problem, 100% you have hardware problem.
Installing Win7 wont fix it.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

No headphone sound after Windows 7 clean installation

Hello.
I recently performed a clean installation of Windows 7 Home Premium. Before that on preinstalled Windows the problem described below did not show up, sound worked just great.
Now I don't have sound when inserting my headphones in jack (built-in speakers work fine however). Windows reports that sound works, no problems found, but I hear nothing. On the same computer I have also Linux installed and the same headphones work well there in the same jack.
When I put my headphones in, Realtek Manager makes notification that the device is plugged in.
My model is Qosmio X775-3DV78. What I have tried so far:
1) Reinstalling, updating, removing, trying different versions of Realtek HD Audio driver.
2) Changing every possible setting in Realtek HD Audio Manager.
3) Trying different headphones - same result: nothing.
4) Changing settings in Playback Devices.
Since it worked before reinstalling Windows and since it works on Linux on the same computer, there is definitely something wrong with my drivers. Could you please provide information as to what drivers exactly I should have installed to make sound work correctly? Maybe some motherboard driver is missing (though I installed everything important I could find on Toshiba site).
Attached are some important screenshots. Please note that there are 2 unknown devices in my Device Manager and also USB Controller driver has problems, though I do not think it has any connection with the problem.
* On both Playback Devices forms Disabled Devices and Disconnected Devices are shown.
Thanks!
UPDATE: One of "Unknown devices" proved to be Toshiba HDD Shock Sensor driver and another one is ACPI\TOS6205.
Attachments:
ToshibaSupport1.png ‏172 KB
ToshibaSupport2.png ‏44 KB
ToshibaSupport3.png ‏21 KB

I have just done the same upgrade to Windows7 and I have no sound from the headphone jack. Also when I plug into it, I don't get the old Realtek Audio evaluation screen for audio setup.
However I do not use headphones, as I have been using a RCA jack to plug from the headphones output jack to
a portilble shortwave radio that I have utilized the 6 inch woofer for the past three years since buying the laptop new, for better output and base sound from the radio speaker while simultaneously running the stereo built-in speakers on the laptop.
Can someone tell me that I should just update the laptop audio card by re-installing the original Realtek Audio Driver? Is that easily accessible here in the official Toshiba site? Also if possible, please inform me of other driver updates that would most likely need re-installation processes after this Windows 7 update.
Thank you for any info,
Mark Seibold, Portland Oregon *If poossible please reply to my direct email >
[email protected]

Satellite M60-BK3: Cannot get sound after Vista installation

Hi,
I've installed Windows Vista Ultimate Edition (32bits) on my Toshiba Satellite M60-BK3, but I can't get any sound either the correct video settings. I've searched on the internet and it seems that this Satellite family is not supported to be upgraded to Windows Vista :S
Does anyone have any idea of how can I get these drivers in order to make my laptop work fine with Vista??
Thank you.
Rodrigo

Hi
This Satellite M60-BK3 model is not known to me. Where did you purchase it???
Try to install a hardware diagnostic tool to find out what sound chip and graphic card this notebook supports.
Then you could download the drivers from part manufacturer site.

Re: Satellite L30D - Low screen resolution after Windows 7 installation

I have installed Windows 7 on my Satellite L30D. Since this installation, I cannot have a better resolkuton than 1024x768.*It was much better with Windows Vista.
I have downloaded the latest ATI driver. No effect. I cannot find the Catalyst Control Center as well. What can I do?

Hi
The Satellite L30D isnt known to me...
Do you mean Satellite L30 or Satellite L300D?
Normally you have to install the display driver if you want to use higher screen resolutions but check the specifications of your internal display first. Maybe the native screen resolution is 1024x768 and you cant use a higher one.
You can download all drivers for your notebook on the Toshiba website!!! Dont use the drivers from ATI directly, they are not designed for mobile chips.

Satellite P100-257 - No sound after Win 7 installation

Need help...
I have Satellite P100-257, upgraded from XP to WIN 7. Now my sound device don't work.
I installed driver, but still nothing. In device properties says: device not installed.
However, when I run diagnostic, says that driver has problems and that problem will be fixed after reinstalling driver.
So, it keeps me in the loop all the time.
Tried download some drivers from net, even buy Toshiba Recovery Disk for my model (payed 15$ !!!! for gad's sake!!!!)...
Now, my knowledge here is limited, so any tips, suggestions, solutions are more than welcome!
Thanks!

Thanks m8!
Acctually, after 2 days cracking my head about it, I was this close to buying new machine :)
But, solution was acctually more simple than I thought...And felt so stupid after I finally figured it. Well, Win 7 is more similar to XP than it is to Vista, so I just run simple chec for XP sound drivers on Toshiba download support web site, and it came with one driver for this specific model: *sound-20071106151533.zip* driver. Just needed to check in driver properties for compatibility (XP service pack 3 mode) and simple install...That was it... Run smoothly on WIn 7.
Sometimes, only solution is the simplyest one :)
Thanks anyway!

Satellite A350D - WLAN card disappeared after Windows 7 installation

Hi folks.
This is my first post on this forum, and it's not for a good reason.
I have installed a brand new copy of Windows 7 32 bit, and after installing it, i have gone to Toshiba website and download the drivers for this version of SO. Everything looks great, except that the wireless LAN card drive don't works now. On the device manager nothing appears available. I don't have any error on Windows System Information.
What is the problem? The wireless switch is on!! FN + F8 don't work. Help me!!
[*Device Manager:*|http://img295.imageshack.us/img295/4649/systeminformation.jpg]
[*System Information:*|http://img218.imageshack.us/img218/6196/devicemanager.jpg]

Hi,
Have you installed the Wlan driver?
http://aps2.toshiba-tro.de/wlan/?page=downloads
Download and install the driver for your model, while installing the driver enable the Wlan switch (if available) or pressing FN+F8

Satellite P35-S6112 - No sound after Windows 7 installation

Similar Messages

Maybe you are looking for