Satellite P500/01R reads data but cannot write data files to CD

I recently bought a Satellite P500/01R laptop. I am able to read a data CD but cannot write data files to CD. The CD is read/write.
Any ideas?

Hi
Did you try different burning software?
Im using the Nero and in my opinion one of the best burning applications.
There I can choose between CD, DVD, DL or Blueray (only possible if CD/DVD drive supports this too.)
Did you also check different CDs from different manufacturers?
You should do this since not all disks are 100% compatible.
I had many issues with different CD or DVD in most cases it was an compatibility issue I tested TDK and these kind of disk is compatible with my CD/DVD drive
Im using the R standard.

Similar Messages

I HAVE ADOBE READER INSTALLED BUT CANNOT OPEN PDF FILES ON THE INTERNET

i HAVE ADOBE READER INSTALLED BUT CANNOT OPEN PDF FILES ON THE INTERNET

This could be the problem/solution: http://support.microsoft.com/kb/2716529

Boot Camp - Windows can read Mac disk, but cannot write to it

iMac OSX Snow Leopard. Windows XP.
Can anyone help me resolve this. I have installed Windows XP using Boot Camp. The Windows folder is 31GB using FAT32.
Windows can read from the Mac disk, but cannot write to it (I get an ACCESS DENIED) error.
I have checked that permissions are set to Read/Write on the Mac, and have run permissions manager to check all is well. I have also tried deleting and reinstalling Windows, and creating a second User on the Mac.
When I boot into OsX then I can write to the Mac hard disk from another (Windows) computer on a network.
I think this did work initially, and it stopped working when I changed the computer name on the Mac (though this might be a red herring -- but it did definitely work OK yesterday).
I'm a new convert to Macs, but am experienced with Windows machines, and I would appreciate any pointers.

This is by design. The driver that allows access to the HFS partition is read-only. This prevents any possibility that Windows viruses could become an attack vector against the Mac OS. If you need to transfer files between Mac and Windows, you can always use an external hard disk or memory stick formatted as FAT.

How to configure secondary domain controller read only, but prevent write in replication?

Hi all,
I have one primary Domain controller (dc1.abc.local) at site, production mode.
I am trying to do some Proof of Concept with the firewall appliance, which the user datastore need extract and bind to AD.
I am thinking setup another new computer and promote it domain controller (new.abc.local), same domain, same forest. But this only can read the configuration replicate from primary Domain controller (dc1.abc.local) but cannot write.
Firewall will use the ID agent to pull the log event from the DC and do the IP mapping table (User - IP).
What is the setting i need to on both domain controller?
p.s: one criteria i cannot set this server role as RODC.
p,s: platform is window servers 2008 R2
Thank

Not very easy telling you how to extract info, not sure what it is you need and your skill level scripting.
There is a Microsoft Script Center that has scripts available
http://gallery.technet.microsoft.com/scriptcenter/site/search?f%5B0%5D.Type=RootCategory&f%5B0%5D.Value=activedirectory&f%5B0%5D.Text=Active%20Directory
Also there is a scripting forum, where you could ask for help in crafting your script
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver#forum=winserverpowershell&filter=alltypes&sort=lastpostdesc&content=Search
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights.

Cannot write configuration file

Hello,
I have a problem loading up a project I have taken over from some one else. I need some guidance as I can't seem to find the solution. However im not that familiar with .NET or MVS as I once
was. The message I get is as follows :-
Microsoft Visual Studio
Creation of the virtual directory localhost:49623/ failed with the error: Filename: \\?\C:\Users\firstname.surname\Documents\IISExpress\config\applicationHost.config
Error: Cannot write configuration file
However I have checked the permissions and can't see anything obvious. Under guidance from another developer I have also updated :-
www.nuget.org/
and
www.nuget.org/packages/Microsoft.AspNet.Mvc
I am using a Windows 7 enterprise edition Dell Lattitude laptop. With MVS as follows
Microsoft Visual Studio Professional 2012
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.50938
Installed Version: Professional
Microsoft Visual Studio Tools for Applications 2012   04938-088-1153812-02395
Microsoft Visual Studio Tools for Applications 2012
Office Developer Tools   04938-088-1153812-02395
Microsoft Office Developer Tools
Team Explorer for Visual Studio 2012   04938-088-1153812-02395
Microsoft Team Explorer for Visual Studio 2012
Visual Basic 2012   04938-088-1153812-02395
Microsoft Visual Basic 2012
Visual C# 2012   04938-088-1153812-02395
Microsoft Visual C# 2012
Visual C++ 2012   04938-088-1153812-02395
Microsoft Visual C++ 2012
Visual F# 2012   04938-088-1153812-02395
Microsoft Visual F# 2012
Visual Studio 2012 Code Analysis Spell Checker   04938-088-1153812-02395
Microsoft® Visual Studio® 2012 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V.
All rights reserved.
Visual Studio 2012 SharePoint Developer Tools   04938-088-1153812-02395
Microsoft Visual Studio 2012 SharePoint Developer Tools
NuGet Package Manager   2.8.60318.667
NuGet Package Manager in Visual Studio. For more information about NuGet, visit docs.nuget.org/.
PreEmptive Analytics Visualizer   1.0
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 11.0.5058.0
SQL Server Data Tools   11.1.20627.00
Microsoft SQL Server Data Tools
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 11.0.3436.0
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 11.0.3436.0
Web Developer Tools   1.0.30710.0
Microsoft Web Developer Tools contains the following components:
Page Inspector: Tool that offers an efficient way to decompose Web Applications and diagnose front-end issues.
Web Publishing: Extensions required for Web Publishing for both hosted servers as well as on premises.
Web Form Templates: Includes the default templates for Web Form Applications.
Editor Extensions: Includes HTML, CSS, and JS editor extensions that greatly enhance the development experience.

I see some others have had success by removing encryption on the IISExpress folder and removing the Read Only attribute as well.
See this post for details.
Others have had success by doing the following:
- Run Command Prompt (cmd) in Admin Mode
- Enter the following command: DISM /Online /Cleanup-image /Restorehealth
...as detailed here.

How to read .dat files that are hidden?

Is it possible to read .dat files that are set to hidden? 'cause what i did was i created a .dat file and set its attributes to hidden and my Read file code cannot read hidden files.
here's my Read file code:
Scanner read=new Scanner(FileReader("C:\password.dat"));
and another thing, how do you Write a .dat file that is hidden too? 'cause my password.dat file needs to be updated.
here's my Write file code:
PrintWriter write=new PrintWriter("C:\password.dat");
thank for the help.

There should not be any problems opening up hidden files. Your problem is probably elsewhere (for example, you didn't escape the backslash, so what you posted is not your code).

I'm trying to download my Master CS6 onto a new hard drive because my old one crashed and I keep getting a message saying " Cannot write the file" or "I don't have permission to access the requested resource." ? What does this mean?

I'm trying to download my Master CS6 onto a new hard drive because my old one crashed and I keep getting a message saying " Cannot write the file" or "I don't have permission to access the requested resource." ? What does this mean?

Yes- it is a Mac. I went through adobes system requirements and re- downloaded supportive software. The notice seems to happen near the end of the down load with the messages above. I'll look into your suggestion. Thank you- appreciated.

Cannot write class file...

I have no idea what this means. This app was running just
fine. Then wham.
Here is the error message:
Errors reported by Java compiler: Found 1 semantic error
compiling
"D:/CFusionMX/wwwroot/WEB-INF/cfclasses/cfApplication2ecfm855244706.java":
1. public final class cfApplication2ecfm855244706 extends
coldfusion.runtime.CFPage{ <-------------------------> ***
Error: Cannot write class file "cfApplication2ecfm855244706.class"
because that name conflicts with the name of the class file
"cfapplication2ecfm855244706.class" in directory "cfclasses". This
is illegal because file names are case-insensitive in this system.
If anyone can tell me where to look and what to do here, I
would be very grateful.
Thanks,
Lee

Try clearing out your cfclasses directory which is located on
your machine at D:\CFusionMX\wwwroot\WEB-INF\cfclasses. Then
restart CF.

Konqueror - inode/directory, but cannot handle this file type [solved]

After upgrading kde 4.3, konqueror error: ...inode/directory, but cannot handle this file type. I tried this link but didn't work:
https://lists.ubuntu.com/archives/kubun … 40719.html
EDIT:
Requires dolphin

" I recompile ctag with option --disable-external-sort and everything is ok ! "
http://tech.groups.yahoo.com/group/vim/message/89321
Last edited by robsonpeixoto (2010-11-17 18:51:57)

REP-50127 Cannot write into file

Our situation:
DB Oracle 10.2.0.3
Reports server version: 10.1.2.0.2
We are generating reports in PDF and storing them in the Oracle OCM (previous IFS) system.
Once in a while we get an error.
The report trace gives the following:
[2010/9/29 7:10:9:739] Exception 50127 (): Cannot write into file Invoicexxx.PDF
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at oracle.reports.utility.Utility.newRWException(Utility.java:758)
at oracle.reports.utility.Utility.copyFile(Utility.java:469)
at oracle.reports.server.DesFile.sendFile(DesFile.java:85)
at oracle.reports.server.Destination.send(Destination.java:484)
at oracle.reports.server.JobObject.distribute(JobObject.java:1594)
at oracle.reports.server.JobManager.updateJobStatus(JobManager.java:2332)
at oracle.reports.server.EngineCommImpl.updateEngineJobStatus(EngineCommImpl.java:134)
at oracle.reports.server._EngineCommImplBase._invoke(_EngineCommImplBase.java:94)
at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
[2010/9/29 7:10:9:739] State 56016 (JobManager:updateJobStatus): Job 642218 status is: Executed successfully but there were some errors when distribute the ou
tput
REP-50159: Executed successfully but there were some errors when distribute the output
REP-50127: FILE : Cannot write into file Invoicexxx.PDF
[2010/9/29 7:10:9:740] State 56004 (EngineInfo:setState): Engine rwEng-1 state is: Ready
[2010/9/29 7:10:9:741] Exception 50159 (): Executed successfully but there were some errors when distribute the output
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1110)
at oracle.reports.server.ExecAsynchJobThread.run(ExecAsynchJobThread.java:54)
[2010/9/29 7:10:9:741] Exception 50159 (): Executed successfully but there were some errors when distribute the output
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1110)
at oracle.reports.server.ExecAsynchJobThread.run(ExecAsynchJobThread.java:54)
There is enough diskspace available so that's not the issue.
Does anybody know what triggers the error and how we can avoid it?
Edited by: vccservice on Sep 30, 2010 11:02 AM

no freespace in the tablespace is also the reason for this error

I can receive MMS messages but cannot open the file sent...

I can receive MMS messages but cannot open the file sent. It is just blank. Please help. Thank you.

Hi there!
Are you positive that the attached file is compatible with your device? See this KB for information:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB05482&sliceId=1&docTy...
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

A client has sent me an indesign file I cannot open. She says she has updated to Indesign CC 2014. I am a CC member and fully updated my own software but cannot open the file she has sent me, not even if she saves as an IDML, how do I resolve the problem?

A client has sent me an indesign file I cannot open. She says she has updated to Indesign CC 2014. I am a CC member and fully updated my own software but cannot open the file she has sent me, not even if she saves as an IDML, how do I resolve the problem?

There are a few things to try.
First, if this file came to you vial email attachment, it could have been corrupted. Ask her to zip the file and send it again. That sometimes helps.
I suppose there's a chance that the file is already zipped, so see if that's the case and unzip it if so.
If the file name doesn't end with .indd, add it and see if that helps.
If you are double-clicking, try File>Open from within InDesign.
Last (and I know this sounds like a joke, but I've seen it many times), sometimes people attach a Mac Alias or Windows Shortcut instead of the actual file. What is the file size? If it's really small, that might be the reason.
Also, no offense intended if some of this sounds like stuff you have already tried. I don't know what you know, so I'm just spit-balling.

I recently purchased a movie on i tunes which is not showing in my purchased file. I downloaded it on my ipad but cannot see the file on I tunes. Ipad lost so trying to retrieve a movie file. Any ideas please?

I recently purchased a movie on i tunes which is not showing in my purchased file. I downloaded it on my ipad but cannot see the file on I tunes. Ipad lost so trying to retrieve a movie file. Any ideas please?

The movie will only be where you put it.
However,in some countries you can redownload some movies:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Learn more about which content types are supported for iTunes in the Cloud by country, as well as where iTunes Match is available.

Trying to install itunes on my new windows 8 laptop and getting an error message cannot write to file?

error message cannot write to file when trying to install itunes on windows 8 laptop.

Hi Stacy,
Welcome to Apple Support Communities.
Take a look at the article below, it provides a lot of great tips that will resolve most iTunes installation issues.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
If you run into any issues, just reply with details about the step you're on and what you're seeing.
-Jason

I have downloaded adobe reader xi but cannot open my system is Windows 7 Home professional?

I have downloaded adobe reader xi but it will not open - my system is Windows 7 home professional?

Some things to try...
Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
If you cannot open Reader by itself, try to disable Protected Mode in the registry; download, unzip, then run the attached registry script
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

Satellite P500/01R reads data but cannot write data files to CD

Similar Messages

Maybe you are looking for