Satellite P500/024: NUM LOCK & ECO button does not work

Hi,
The Numlock keyboard has stoped working and does nothing since windows 7 upgrade, i can toggle the numlock button but this does nothing i have searched the forum and a bios update is reccomended but toshiba australia dont provide one on their site
also the "eco button" has done the same, i have both the TVAP and Eco programms installed and they are both the latest release.
Has anyone got any ideas, the full part number is PSPE8A-024008
Thanks

Please follow the thread which you have already created here in the forum:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=182178

Similar Messages

  • Satellite P20: Fn+F5 and TV-button does not work

    Satellite P20, Windows XP SP2 keyboard problem.
    When I press Fn + F5, the computer does not show as earlier the different display options. TV button does not work also. I can change the different displays with my nVidia Display Driver.
    My keyboard is OK, there is no dust or fluids. I have newest BIOS update and Windows XP Service Pack 2. What program controls the keyboard functions in this case?
    How to repair this problem?

    Hello
    Obviously you have removed something or preinstalled your own operating system. Without Toshiba designed tools and utilities it will not work. I dont know exactly which of them are for doing this but please try to install Dritek Easy Button Util. /Sticky Keys V1.008, E-Keys Utilities and Toshiba Hotkey Utility.
    I hope it will help. If not please write again.

  • My iphone screen wont work, and my off lock screen button does not work, what can i do?

    Hey guys,
    can you please help! I have never been in this situation and i need help desperately

    Verizon does not fix/repair/replace devices.
    Apple provides all hardware support in the US.
    Take it to Apple for evaluation and possible replacement.
    FYI, they do not fix devices, so backup your device prior to going to the store.

  • HT1430 How can you restart your iphone if your lock button does not work?

    How can you restart or turn off your iPhone if the lock button does not work?

    The best way is to let the battery die. Or you can reset the phone settings which restarts everything.

  • I have the iphone 5 and my lock button does not work. Can apple fix it or give me a new one. Can they still give me a new one even if I didn't buy my iphone 5 from them I bought it from verizon

    I have the iphone 5 and my lock button does not work. Can apple fix it or give me a new one. Can they still give me a new one even if I didn't buy my iphone 5 from them I bought it from verizon

    Alread asked and answered in your previous post - please do not post the same thing multiple times in multiple forums.
    https://discussions.apple.com/thread/5164919

  • My iphone 4 lock button does not work, i turned it off using assesive touch, now it wont turn back on? got any tips for fixing this problem!

    my iphone 4 lock button does not work, i turned it off using assesive touch, now it wont turn back on? got any tips for fixing this problem!

    Hi, braidenwhitesidemate. 
    Thank you for visiting Apple Support Communities. 
    I would recommend going through the steps in the article below.  If the issue persists, see the section labeled Issue not resolved.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Cheers,
    Jason H. 

  • I bought this ipod 4 from a friend the lock button does not work and he doesnt know the password? how do i reset and i cant use my computer????   HELP!!!!!!

    i bought this ipod 4 from a friend the lock button does not work and he doesnt know the password? how do i reset and i cant use my computer????
    HELP!!!!!!

    Place the iOS device in recovery mode usning this program and then then restore via iTunes. The iPod will be erased.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    For how to restore:
    iTunes: Restoring iOS software

  • Stuck on apple logo, lock button does not work

    Hi, I was wondering if someone can help me.
    I have an iPhone 5, and I intend to restore it in order to sell, but every time I try to turn it on, the battery life is low and in the red, and then it is stuck on the Apple logo for ages. My lock button does not work either so I can't actually turn it on properly, or do anything. I leave it plugged in the charger for hours, and it's still stuck on the Apple logo. And when I unplug and let it sit until it dies again, the process repeats...
    What is happening? What can I do?

    You can have it repaired or look up a guide and repair it yourself. The lock button needs to be replaced. It is essential at least for performing resets, like the one your phone needs right now. There may be an issue with the battery as well. I would not purchase an iPhone that did not have all its buttons working properly. The iPhone may not be draining enough to completely reset. Draining the battery this much might damage the battery as well. You probably need to do a reset by holding down the home button and a properly working lock button.

  • Power/lock button does not work. I cannot lock my phone, shut it off or reset it. iPhone5s

    My power/lock button does not work. I am unable to lock, power-off or reset my phone and am unsure of how to rectify this problem when that button isn't working.

    Same here. 64gb iPhone 5s just arrived today. Feels fine but either doesn't respond or *severely* delayed response. Like minutes later... Going for replacement.

  • HT1212 what if your home button does not work to try to fix the connect to itunes problem?

    How do you diable your locked i pod touch using itunes if your home button does not work?

    Use one of these programs to place the iPod in recovery node:
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    The Firmware Umbrella - TinyUmbrella

  • Froze on black screen and power button does not work

    my sons ipod touch is stuck on a black screen when plugged into the computer got a spinning wheel and will not connect now spinning wheel will not go away the power button does not work so can not reset it manually
    any suggestions would be appreciated

    - iOS: Not responding or does not turn on
    Neglect the reset and when it says place the iPod in recovery mode use one of thes programs
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My lock screen button is not working and i turned off my iphone with assistive touch. Now i cant turn my phone back on!

    I used assistive touch to turn off my iphone, because my lock screen button is not working, so now i cant turn it back on! What i did was, i went to assistive touch, then i held down the lock screen button to turn it off. Now i can't turn it back on.

    To turn it back on when you use assistive touch, all you have to do is plug your iphone into a charger and it will power back on

  • My daughter down loaded the new 6.0 software and now her home button does not work.  Tried reloading software and reset to original factory settings.

    My daughter down loaded the new 6.0 software and now her home button does not work.  Tried reseting to original settings and reset the operating software.  Any ideas?

    Try:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Windows 8.1 - Upgrade from 8, Start Button Does Not Work

    I cannot find a fix for my 8.1 start button.
    It works when I move the task bar to the top, right or left but not at the bottom. I ran all windows updates and there are no missing/unknown drivers in device manager. No errors in the event log. I've restarted multiple times and created a new local profile.
    I've also tried: 
    Copy WinX folder under C:\Users\Default\AppData\Local\Microsoft\Windows into C:\Users\[your user name]\AppData\Local\Microsoft\Windows.
    dism /online /cleanup-image /restorehealth
    Any ideas? I would prefer not to do a clean install. Thanks in advance. 
    HP Touchsmart 23 series
    i5-3475S 2.90GHz
    16GB RAM
    1TB HDD

    Could you please describe a little more detailed about “Start Button does not work”? What is the symptom?
    Yes, when the taskbar is at the bottom of the screen, I cannot left click on the start button. The machine is also a touch-screen, which does work when I touch the start button. If I move the task bar to the left, right or top; the start button does work.
    And what is the kind of the account, Domain? Local? Or both?
    This is local machine.
    It still doesn’t work in a new account?
    Same issue happens with a new account.
    What happens if you use win + "X"?
    Win + "X" works fine; displays options.
    Regarding to the “doesn’t work, both for screen touch and mouse?
    Left-click via the mouse does not work. Touch works fine.
    Can you try to copy the WinX folder from a working PC to your PC for a test?
    I do not have another Windows 8.1 machine available to me.

  • Ipad 2 Print button does not work after 6 upgrade?

    Since we upgraded to iOS6, our print button does not work and does not find our printer.  It was working fine until iOS6.  Called an Apple Technician and he had me reset, which wiped out all of my saved information but didn't fix the print.  He then started talking about a restore but the phone line went dead.  Has anyone had this problem?

    Today's iOS 6.1 update fixed the printer problem.

Maybe you are looking for

  • Associative Array, Drp-DwnList and Accesing "SubArray" Values ?

    Based on the users selection on a drop-down box, I need to be able to access different elements associated with that selection (elements of a subArray, so to speak) I am not certain how to go about creating arrays in LiveCycle. I've tried a number of

  • How can I get the element value with namespace?

    I tried to get a element value in xml has namespace but i can't. I removed the namespace, i can get a element value. How can i get a element value with namespace? --1. Error ----------- xml ------------------------------ <?xml version="1.0" encoding=

  • Ipad air VGA cable?

    Hi, Just updated my iPad 2 to the new iPad air and of course all my old connectors are now useless! Does anyone know if there is a cable I can use to hook my thunderbolt dock to a VGA?? Many thanks

  • How to improve SQL Query

    Hi, I have to search record from one table that consists of more than 75 million row records. I've try to index in this table. My problem is query result execute so slowly. How to increase the performance so i can get query result quickly ?? here is

  • Brand new macbook pro, stuck by FileVault!

    trying to setup the brand new MBP with retina display, and by default, the FileVault is checked, and i'm so regret that i didn't uncheck it... it's just stuck there and won't go further, and i'm sure the power adapter is perfected connected...