Satellite P500 - Can't find Smart Audio program

Hi guys,
Sorry to bother you again, but it seems I have another problem. I sent my Satellite P500 for repairing several days ago, but when it came back I could not find that Smart Audio programme on it. And it is never to be found.
Could you help with this problem? Thank You.

Hi
As far as I know this Smart Audio program has something to do with the sound driver or lets say its a part of it. So in your case I would recommend reinstalling the sound driver.
You can get the latest version on the Toshiba website.
Check this!!!

Similar Messages

Presentation can't find linked audio - program crashes on "Replace"

A lengthy presentation was created in Keynote 2 with dozens of linked audio files. The computer was updated from 10.3.9 to 10.4.7 and Keynote 3 was installed and updated. Now, when the presentation is opened, it reports that it can't find each of the audio links; when the Replace button is clicked, Keynote crashes. This is a consistent crash. When the Cancel button is clicked instead, the presentation continues to load until the next audio file link is encountered. The audio files are stored in the iTunes Music Library and always worked prior to the upgrades.
The same presentation was then opened in Keynote 2 (updated), with the same result.
How can this be fixed? Do each of the links have to be recreated? Help!
PB G4 17" 1.67 GHz Mac OS X (10.4.7) 1.5 GB RAM

Further to the original post:
The presentation was created on another computer and copied to the PowerBook along with the entire iTunes library which contains the linked audio files. As stated before, the presentation worked prior to the OS and Keynote upgrades.
I networked the two computers together, and the presentation opened without problems, which leads me to conclude that the links are hard links. However, other presentations using the same files open without difficulty when the computers are not connected together.
Further, the presentation and iTunes library (along with everything else) were migrated to a new 17" MacBook Pro and failed identically, while the other presentations using the same linked files worked fine, just as on the PowerBook.
Any suggestions will be greatly appreciated, as it will take a LONG time to rebuild the audio links in the problematic presentation from scratch, and there's no guarantee that revisions to the presentation will work if it's moved to one of the other computers.
PowerBook 17" 1.67 GHz Mac OS X (10.4.7) 1.5 GB RAM

Downloaded your updated version and I now can't access my audio program and I want to get rid of my Yahoo toolbar. HELP?

downloaded your updated version and I now can't access my audio program (Windows Media Player) and I want to get rid of my Yahoo toolbar. HELP?

Go to Tools | Add-ons | Extensions, find the Yahoo Toolbar and click Remove ;)

Can't find main class - program will end

Dear forum readers,
Recently upgraded from Win2k pro to XP pro .. installation ran to conclusion w/ no fatal errors BUT upon booting new system I now receive an error message "Java Virtual Machine Launcher can't find main class, program will end" .. I am not aware that this error is causing any problems BUT it is annoying and I'd like to be able to fix the problem so I don't have to close the error message at each startup .. please help!
Thanks in advance, Larry

Try this
java -XbootClasspath/a -jar <<Prog name>>
I think you are trying in windows XP.
Also you need to modify if there are any other jars to be reference. For eg if a.jar is also required for this try as below
java -XbootClasspath/a:a.jar -jar <<Prog name>>

Where can we find the standard program for scripts and smartform for vl02

where can we find the standard program for scripts and smartform for vl02
regard,
anil

If it is a standard Script Output see that all config in NACE tcode was done correctly and in the Application document the output type was properly defined and attached to a medium, partner and all communication related things like printer name, when to print the output and number of messages etc are entered in the document
the go to the related application Tcode
(for sales order goto VA02 or VA03)
(delivery -VL02N or VL03N)
for Invoice VF02 or VF03
for PO -goto ME9F
enter doc number, Issue Output to -> screen/printer
then see the output
step 1 : copy the z layout into testing client thru SCC1.
step2 : go to se71 and check modified layout.
step3 : if it is under logistics.. go to TCODE "NACE".
u will see various applictions for each business process.
there u have configure ur related layout according to requirments,
for example u consider for Request fo Quatation..
there is APPLICATION called "EA"
click and enter into it. configure it with ur requirments, for help consult with ur functonal consaltant, and save it.
step 4 : goto tcode ME9A for requst for quatation(RFQ).
step 5 : enter test data avalable and check it with message display.
it is same for other applications like Contract agreament --> ME9k
invoice --> vl02n
and goes on..
Reward points for useful Answers

Can't find my audio book -- Downloaded it from my public library to iTunes via Overdrive. It transferred to my old nano just fine but, even though it seemed to transfer to my new iPhone, I'm not able to locate it for playback.

Can't find my audio book -- Downloaded it from my public library to iTunes via Overdrive. It transferred to my old nano just fine but, even though it seemed to transfer to my new iPhone, I'm not able to locate it for playback.

Thank you. That solved the problem. So simple but it wasn't intuitive to me.

Can't find the application program in itunes

Can't find the application program in itunes!!
Can charge, see a picture, is unable to find application in ITUNES

If it's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If it's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(81033)

How can i find the printing program?

hi
i have sap script how can i find the printing program ?
ami

ami bardogo wrote:
hi
what is the different between the commands 'break' and 'break-point'
thanks,
ami
h2 Breakpoints h2
Apart from being able to execute an ABAP program in the Debugger, you can also start the Debugger call by the choosing a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For more information, refer to the chapter Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
A user-specific breakpoint is inserted in the source code as an ABAP statement using the keyword BREAK-POINT. A non user-specific breakpoint is set in the ABAP Editor using the BREAK user name statement.
Directly set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger by double-clicking a line, for example. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statements
The Debugger stops the program immediately before the specified statement is executed.
Breakpoints
at subroutines
The Debugger stops the program immediately before the specified subroutine is called.
Breakpoints at function modules
The Debugger stops the program immediately before the specified function module is called.
Breakpoints at methods
The Debugger stops the program immediately before the specified method is called.
Breakpoints at exceptions and system exceptions
The Debugger stops the program immediately after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
·        You do not have to change the program code.
·        You can set them even when the program is locked by another programmer.
·        You can define a counter that only activates the breakpoint after it has been reached.
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they remain in effect during the entire user session if they are saved by choosing the menu path Breakpoints ® Save in the ABAP Debugger. For more details on the subject of user sessions and modes, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
For further information on special breakpoints, refer to:
Breakpoints at Statements
Breakpoints at Subroutines
Breakpoints at Function Module Calls
Breakpoints at Methods
Breakpoints at System Exceptions
h2 page break h2
WINDOW TYPES
When defining a layout set window, you must select a window type for the window. You can choose between three types:
Constant windows (CONST)
Variable windows (VAR)
Main windows (MAIN)
CONSTANT WINDOW
A window of type CONST has the same contents and size on all layout set pages, on which a corresponding page window is defined. This allows the processing of the window contents to be optimized internally.
Page windows whose allocated window is of type CONST must have the same size throughout the layout set. If a window of type CONST is full, all remaining text the application program wants to output in this window, is lost. Constant windows do not trigger a page break. In other words: all text exceeding the window size is simply truncated.
VARIABLE WINDOW
The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different layout set pages.
As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike. The only difference is that constant windows have the same size throughout the layout set.
MAIN WINDOW
Each layout set must have one window of type MAIN. Such a window is called the main window of the layout set. For SAPscript layout sets, the main window has a central meaning:
It controls the page break.
It contains the text body that may cover several pages.
It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the layout set. The SAPscript composer thus avoids reformatting of the text after each page break.
If a page does not have a main window, the system implicitly processes all other windows of the page and continues with the subsequent page. This page must not call itself as subsequent page (recursive call), since this would produce an endless loop. In such a case, SAPscript terminates the output after three subsequent pages.
HOW THE COMPOSER WORKS
The composer or layout set processor is the central formatting module for the print output. It prepares the texts for the different output devices by using the allocated styles or layout sets.
Processing a layout set happens in a certain order. You must know some facts concerning the different window types, the setting of subsequent pages, or the dynamic control from within the print program.
Page control in layout sets
Define subsequent page statically
Define subsequent page dynamically
Format a layout set page
PAGE CONTROL IN LAYOUT SETS
SAPscript automatically triggers a page break as soon as the main window of one page is full. To be able to execute the page break, the system must know on which subsequent page to continue outputting the text. You can specify the subsequent page either statically when defining the layout set, or you can set the subsequent page dynamically during layout set output.
If the subsequent page is not specified, SAPscript automatically terminates printing, thereby ignoring any other output statements of the application program.
DEFINE SUBSEQUENT PAGE STATICALLY
You define the subsequent page statically with the layout set maintenance transaction. First, specify the start page in the layout set header. The system automatically calls this page whenever the layout set is started. With this page, or, more correctly, with the page window of this page, the text output starts. For each page, specify the subsequent page in the page definition. After a page break, the system continues text output on the subsequent page defined for the last page. By specifying start page and subsequent pages, you can define a page sequence.
DEFINE SUBSEQUENT PAGE DYNAMICALLY
The page sequence set in the layout set definition can be changed by the application program dynamically at runtime. If you want the layout set to start with a page other than the one defined in the layout set header, specify the desired start page using the parameter STARTPAGE when you call the function module START_FORM. However, this new start page is valid only for the current call of the function module.
If you want to break to a subsequent page other than the one specified in the page definition, use the control statement NEW-PAGE to set the name of the new page.
NEW-PAGE .
NEW-PAGE ends the output on the current page. The new subsequent page is only valid for the current call of the control statement. You can either include the control statement explicitly into the text of a text element or pass it to the layout set output using the function module CONTROL_FORM.
FORMAT LAYOUT SET PAGE
The process of formatting the output is controlled by the text contents in the BODY area of the main window. If the main window is completely filled, or if the control statement NEW-PAGE appears in the main window, the system executes a page break. Only at this point in time the system formats the contents of the windows of the other types and replaces the variables with the current values.
For each other window, the system first outputs the default text element, if it exists. Then it processes and formats the list of the active text elements of this window, which you set using the function module WRITE_FORM with the parameter FUNCTION (SET, APPEND, DELETE). Any text that does not fit into the page window is truncated.
As a consequence to this processing order of the composer, the reservation of space for the TOP and BOTTOM areas must be made beforehand. If the BODY area of the main window already contains text, a new text output to the TOP area does not appear on the current page but on the subsequent page in the TOP area. The same applies for the BOTTOM area. If the BODY area is filled to such an extend that the new BOTTOM text no longer fits into the current main window, this text appears on the subsequent page in the BOTTOM area.
A frequent error in application programs is that for the subsequent page (for example, NEXT) of a layout set no main window is defined. If the formatted text of the previous page did not fit into the corresponding main window , the composer searches the subsequent pages for a main window to output the text remainder. However, if the subsequent page of NEXT is NEXT again, the composer encounters an endless loop.
To be able to create correct page breaks in longer text, you should define a main window on each layout set page.
LAYOUT SET CONTROL
To output SAPscript layout sets, in the print program you must always start the output with OPEN_FORM and end it with CLOSE_FORM. The function module OPEN_FORM initializes the SAPscript composer and opens the specified layout set for subsequent output. The system combines all output for this layout set up to the CLOSE_FORM to one print request. If CLOSE_FORM is missing, nothing will be printed.
To output data in a layout set, you must use the SAPscript function modules WRITE_FORM, WRITE_FORM_LINES, and CONTROL_FORM. You can use these function modules any number of times in any order between opening and closing a layout set.
You cannot use the ABAP/4 statement WRITE to write output to a SAPscript layout set.
Several print requests
Start a layout set again
Switch layout sets
Find layout sets
SEVERAL PRINT REQUESTS
Within one transaction, you can open and close several layout sets using OPEN_FORM and CLOSE_FORM, however not simultaneously. You can use parameters in the OPEN_FORM to control whether the output is stored in the same print request. But also the SAP spool decides, depending on several plausibility checks, whether new output is appended to an existing print request or whether to create a new print request anyway.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
You cannot combine ABAP/4 list output and SAPscript output in one print request.
START A LAYOUT SET AGAIN
Usually a print program does not print only one urging letter or one account statement, but several layout sets for different customers. To have the output for each customer begin with the start page of the layout set, you must start the current layout set again and again.
To start a layout set again, you must first end the current layout set and then open the layout set again. Within one print request, first call the function module END_FORM. It executes the final processing for the current layout set. Then start the layout set again using START_FORM. Output then begins again on the start page of the desired layout set.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION CLOSE_FORM
If you use START_FORM and END_FORM, you must not specify a layout set for OPEN_FORM. However, in this case you can use the SAPscript output functions only after opening a layout set with START_FORM.

Macbook pro can't find the audio device

Lately I have been having trouble with the audio. The sound doesn't work on the Macbook, and it can't seem to find any devices!
I tried plugging in headphones, but nothing helped.
In the time leading up to this fault, the sound in the mini jack was very poor, and sounded really bad.
When I plug my TV to the computer, by HDMI, I works fine. Even with sound.
Any suggestions?
Oh, and I can't adjust the sound - it simply tells me that there is no device.

I've tried that, and I can't choose anything.
As I said, it can't find any devices. Tried to Reset SMC and PRAM - non helped

Where can I find a antivirus program for my Mac Book Pro?

Can anyone help me?
I would like to know where I can find a antivirus program that apple provide. I need to clean up my mac and install a antivirus program.
Thank you :-)

So far all of the "cleanup my mac" software I have tested has been a dismal failure.
They either don't do anywhere near what they claim they will do or else they do dangerous stuff without even asking your permission first.
For these reasons I recommend most strongly that you avoid them all.
Allan

Where can i find the Audio Files from Games?

Who can help me i' am serching the folder for Audio Files from Games and Application's where can i find it by the way the sound folder from Application is not so important!

Google audio game files, this is a free link. but there are quite a few.
Hope you find the file you are loking for, plenty of hunting out there:)
http://soundbible.com/tags-game.html

Windows 10: I can't find a audio driver that will work with my HP Touchsmart 520.

I am beta-testing Windows 10; It handles many HP Touchsmart operations well; but it can't find a driver for audio. I have tried many download sites; and Windows Update (which apparently does have some problems as well) and have been unsuccessful in a two-week search.
I'd appreciate any tips, or direction on how to resolve the problem.
Thank you.

Hi,
I think many hardware vendors are working with Microsoft to get a good out come for all and specially for customers. Users don't want a product like Windows 8 or Vista, they want a rpoduct like Windows XP or Windows 7. Windows 8.1 (not 8) is much better but many users are still don't like it therefore from my opinion: Microsoft have to do something about that.
Back to drivers, as mentioned above, vendors are testing. We can raise our voices but still have to wait.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can't find downloaded audio from our iTunes U Site

We are testing a password-protected site.
We want students to be able to directly download content to their iPod Touches, without going through a computer. Once downloaded, we can see video files, but not audio ones. This is on iPod Touch 3G, freshly restored with iOS4. Can someone else test this for me?
Go to http://ilex.conncoll.edu (rough visual prototype pages)
Enter demo for user and demo for pw. You will see thee podcasts.
Guitar Recitals has only one group. I downloaded 1-Italiana and 2-Etude in Bm. Once downloaded, I can't find them anywhere on the iPod. However, if you do a search, they come up and can be played!
Videos are not a problem, they show up under Videos.
Anyone have any idea where the audio files would be listed?
Are we doing anything wrong with adding metadata? Right now there is only an image.
The audio files show up correctly in iTunes on a computer, under iTunes U as part of a podcast, the problem seems to be the iPod. This is also an iPod support question, but I thought I'd start here.

Just some additional details:
1. Audio files directly downloaded on the iPod Touch from open sites in the app iTunes>iTunes U show up in the app Music>iTunes U, and are grouped into their respective podcasts. Audio files downloaded from our password-protected site are nowhere to be found (unless I'm blind), and when they are through search, are not grouped with files in the same podcast, in the little upper file list window (like open download files are).
2. Video files directly downloaded on the iPod Touch show up in Videos, and are grouped as episodes in their respective podcasts, but video files downloaded from our password-protected site are displayed as belonging to individual episodes, though they are part of one podcast.
Wondering if adding any metadata to the files before uploading would fix this, or if this is a bug.

Satellite P500 - Can't increase screen brightness

I have a new Satellite P500.
The problem I have is if I have the power switched off for several hours I lose the ability to increase the brightness of the screen. I can get the brightness increase at level 4 and when I increase to level 8 the brightness decrease. If I go down the screen goes black. The only solution I have found is to power down, take out the battery put it back in and power up.
Help would be greatly appreciated.

Hi
I would recommend to recover the notebook
This would allow you to reinstall the OS and to set the notebook to the factory settigns.
I think the issue might be related only to software problem maybe something wrong with installed VAP or other tools however its necessary to known if this will happen using Toshiba preinstalled OS
Dont install any 3rd party software before testing this display brightness FN+F6 and F7 key combination.

Help? I can't find my audio book?

I downloaded an audio book from iTunes on my computer. I have iTunes on my iPhone. I can't seem to find the audio book--if it's even there. How do I do this. (I'm used to downloading apps from iTunes and having them just be on my phone.) Any suggestions on how to get this audio book onto my iPhone? I'm sure it's possible . . .
Thanks.
PS This community has been incredibly helpful.

Swipe your Home page to the far right and do a Search of your audio book.

Satellite P500 - Can't find Smart Audio program

Similar Messages

Maybe you are looking for