Satellite P500 - Eco, speaker and touchpad on/off button don't work

Hello,
I love my new Satellite P500. Great Laptop!
But I have a little problem with the eco button, speaker button an the touchpad on/off button. They dont work! 2 days ago I refreshed my Windows 7 after the same problem. Today I have the problem again.
I searched for a option where I can support this buttons, but no result.
Is it possible to reinstall it?
I installed the eco software again, but it wont work with the button on the left side. Same with the touchpad on/off button.
Any Idea?
Thanks
Alexander

Hi
Nice to read that you are love your new Satellite P500. My friend has also bought new Satellite P500 and he is very satisfied too. Its a great notebook with fast and new hardware equipped. The design is fantastic I have to say.
Anyway, you can reinstall the Eco Utility and Toshiba Value Added Package that controls such special functions. Both utilites you can get on the Toshiba page:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Good luck! :)

Similar Messages

  • Re: Satellite L655 - Touchpad On/Off button isn't working

    Just this morning, I noticed that the on/off button of my Satellite's touchpad doesn't work, although the Fn+F9 key combo does work in activating and deactivating my touchpad.
    It was working well last night until I slept, when I woke up, my laptop has restarted due to Windows updates during the night. I didn't take notice of anything since I was using a wireless mouse. Then upon reaching work and checking if I can activate my touchpad (Windows has loaded and logged on), the on-screen display that tells if the touchpad is active or not is not showing up and my touchpad on/off button won't work.
    Any help is greatly appreciated.
    Thanks.

    Oh, sorry about that... I'm using Windows 7 Home Premium 64-bit... Came pre-installed with the laptop...
    I already did what Xaver suggested. Uninstalled VAP, restart, reinstalled VAP, restart. Unfortunately, the problem still won't go away. As I've mentioned, the button works *BEFORE* logging in to a profile, after that, it doesn't anymore.
    I might try doing a system restore to the point when my computer installed the Windows updates... That might do the trick...

  • What do i do if my ipod 3 is disabled and the power off button does not work?

    What do I do if my iPod 3 is disabled and  the power off button does not work?

    Did you try restoring your iPod on itunes.

  • M30 - Front Mode and Audio/Video Control buttons don't work

    Hi
    The Front Mode and Audio/Video Control Buttons Don't Work
    Any ideas?
    Thanks

    Hi
    As far as I know the Toshiba Controls utility is responsible for key usage.
    Did you try to install Toshiba Controls?
    Check the Toshiba driver page for this driver.
    Bye

  • I just downloaded Yosemite OS for mac and Premier pro play buttons don't work in the Program, Source and timeline and no audio HELP?

    Yosemite OS seem so not allow me to use premier pro. Specifically the play buttons don't work in the source, program and Timeline. Any one have this problem?

    Hey,
    I´ve got the same problem, that since i upgrade to Yosemite, my R3D Video Files are not longer supported, sometimes it works but most of time it says "not supported File format".. Hope Adobe will fix it.
    Play button works. Try installing the latest Java 8 update. This might fix some problems.

  • Home button off button don't work and I am stuck in an advertisement that I don't even want to be in

    Hi wisp1010 here my iPod is jammed up tell me your email and ill send you a vid of the problem

    If you can't get to another screen you will have to connect the iPod to your computer and restore via iTunes:
    - Restore from backup. See:                                                
      iOS: How to back up
    If you can't do that:
    Try:                           
    - iOS: Not responding or does not turn on
    When it says place the iPOd in recovery mode
    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single ClickFor MAC or PC           
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • HP Zbook 15 G2 brightness and microphone on/off buttons do not work

    The microphone muter and brightness buttons on my keyboard (Fn+f8/f9/f10) won't work. I've tried installing all the computer's drivers manually and via the hp support assistant, but to no avail. In my device manager list there is an unknown device left: ACPI\HPQ6007\3&33FD14CA&0. I couldn't find another thread about this problem, so I made this one.

    i have also this problemhp zbook 15  running windows 7 enterprise x64

  • My screen gets dim and the brightness control buttons don't work

    My screen is frequently dim.  The brightness control buttons display that they are working, but the brightness doesn't actually change.  Any ideas why and what I can do?

    Thanks for the suggestion.  Actually, I had tried that but still had to go into preferences any time I wanted it brighter.  After I posted, I found a thread using some different keywords and found that people were having the same problem with OS versions up to 10.7.2 but solved it with the latest update (10.7.3).  I just installed it and now seem to be able to adjust the brightness with my keyboard no problem.  I appreciate your reply anyway!

  • Satellite A300-1GN - Media buttons don't work with Win 7

    Hei
    I installed windows 7 to my Toshiba satellite a300 1gn, Short Model No: psagce and some illuminated media buttons don't work.
    i have the latest drivest but still nothing. first button is should controll the illumination for media buttons, touch pad and Satellite logo.
    second button should open media player or something like that. the other fore buttons work fine!
    Could someone helt me solve my problem?

    Hi
    You have to configure the single buttons.
    This Toshiba button support pop up will appear if the pressed button was not configured.
    So press the button and then assign the action, application.
    You have to expand this menu pressing on the small arrow on the right.
    Greets

  • TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

    My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

    - After charging for 1/2 hour or so, does iTunes see the iPod?  If yes, restore the iPod from backup.
    - If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • My home screen is gigantic. As a result I cannot see the keypad for entering in my passcode. Somehow, everything on my home screen has expanded to gigantic size. I've tried to reset the phone by holding the home button and the on off button...

    My home screen is gigantic… So much so that 1/200 of the normal screen display now fills up the entire screen. As a result, I cannot even see my keypad to enter in my passcode. I've tried a hard reset a few times (holding the home button and the on off button at the same time until the iPhone restarts). This has not resulted in any changes. Any ideas?

    Thank you Lawrence. that worked! I have another question for you as well. I just got this 6 Plus and it is already saying that I am nearing the end of my storage. My  iCloud is apparently 20gb and I have 6gb left. I'm attaching a screen shot. Any thoughts on how I can make available some more storage?
    I Also wanted to get an enhanced quality Speech voice Alex, but it is saying I don't have enough Memory (I think it says memory because I can't read the message fully). Lastly, in your opinion does Grayscale really improve battery life above and beyond what can be achieved by closing out all apps etc. Thank you.

  • Satellite U400: Need Vista install order and Control buttons don't work

    I bought an Satellite U400-11T model with french windows Vista.
    I want to change the french Vista to hungarian Vista.
    Of course I bought a legal vista HUN and downloaded the drivers etc.
    I am interrested in about the install order called installation instruction like at the XP models.
    My second problem is; I have already installed the new Vista HUN and the 6 easy key touch buttons don't work anymore.
    Where can I switch on it or wich program must i reinstall?
    Thanks
    Schmid

    Hi
    The installations order for Satellite U400 should be as follow:
    Windows Vista SP1
    Intel(R) Chipset Module
    Intel(R) Robson(Intel iMSM Driver)
    Intel(R) Crestline-GM / UMA Driver or AMD M82XT /M86 Driver V8.452.2
    Conexant CX20561 Audio Driver
    Marvell 8040/8055 LAN Driver
    Synaptics Touch Pad Driver
    Alps Touch Pad Driver
    Conexant Modem Driver
    Netwaiting
    Modem Region Select Utility
    Wireless LAN Driver
    Chicony Camera Software
    Bluetooth Stack for Windows by Toshiba
    CIR Port Driver V7.1.62.2012
    TOSHIBA Value Added Package
    TOSHIBA Hardware Setup Utility
    TOSHIBA Supervisor Password
    TOSHIBA SD Memory Utilities
    Authentec AES1610 Fingerprint Utility
    TOSHIBA ConfigFree
    TOSHIBA WPS Library
    TOSHIBA Assist
    TOSHIBA Speech System
    TOSHIBA Extended Tiles for Windows Mobility Center
    TOSHIBA Remote Control Manager
    CD/DVD Drive Acoustic Silencer V2.02.00
    Toshiba HDD Protection
    TOSHIBA Face Recognition
    TOSHIBA TRS Driver
    Broadcom
    HDMI Control Manager
    Please do not ask me about single tools. Install all offered stuff following this list and I hope everything will work well.
    Bye

  • I have iphone 4 and his on/off Button is brocken what can I do?

    I have iphone 4 and his on/off Button is brocken what can I do?

    This seems to be a network issue and is common globally.  Apple seems to need particularly good networks to operate consistently.
    I have friends and family with iPhones.  Here are a few experiences:
    I know that my friend is on holiday a couple of hours north of where I live.  I cant call her.  I call her partner who has a Nokia.  Same network same place, actually sitting beside each other on the beach.  The Nokia works fine, the iPhone, inoperative and no signal.
    My Brother has an iPhone 4.  We are meant to be in a convoy heading north.  I am talking to him on the phone and he agrees to pick up our dad.  he is on the motorway in the city.  He is not in the country in some poor coverage area.  I try and ring him straight back and it goes to answer service.  I try again.  I ring his wife, who is sitting right next to him in the car.  She has a Nokia - no problems.  His iPhone simply lost signal.  He was not talking on it.   His iPhone drops calls or is unable to make calls at all sorts of random places.  The worse the coverage, i.e. rural in the country the less service he has. 
    My Brother goes to China on business.  He is roaming.  His iPhone never lost signal and never dropped a call.
    Our conclusion.  An iPhone staying connected to a network is a delicate thing if you do not have a powerful network with good coverage, particularly 3G coverage if you have a 3G phone.  Your solution is to probably change networks and get one that has better coverage.  Your other solution might be to get  Nokia so that you can actually call people and use your iPhone for all of the cool email, games, iTunes and other functions it has.  Afterall that is what is was designed for - the phone thing seems to be an optional extra. 

  • HT1212 My on and off button is not working anymore and my iphone fell again today so the numbers 7,8,9 not working and so i cant enter my password to access my iphone. Pls, what can i do about this to access and change my password?

    My on and off button is not working anymore and my iphone fell again today so the numbers 7,8,9 not working and so i cant enter my password to access my iphone. Pls, what can i do about this to access and change my password?

    Changing your password won't help. It is a touchscreen so if 7,8,9 are not working then that part of the screen will not work if you were to get it unlocked.
    TeeKnows is right. You need to contact Apple for a repair.

  • Any idea why a 3 month old new IPad won't turn on?  It has been charged today and was working perfectly last night while I used it to read a book.  I have tried both the sleep/wake button and the on/off button on the front.  Nothing is happening.

    Any idea why a 3 month old Ipad will not turn on?  It has been charged and I haved tried the sleep/mute button and the on/off button on the front.  Nothing is
    happening.  It was working fine last nigh?

    1. Hold both the Sleep/Wake and Home button down together
    2. For 10 to 15 seconds
    3. Until you see the Apple logo
    4. Ignore the red slider
    Note: Repeat it if it doesn't work the first time

Maybe you are looking for

  • My iPod crashes frequently

    Hi. I've got the following problem: Every once in a while my iPod (with colour display) goes black and won't restart until I connect it to a power source. I tried resetting it and updating the firmware, but it still happens. Does anyone have any idea

  • Android psd file association

    Is there a way to associate the psd file extension with photoshop touch on android? This would be handy when passing work back and forth between phone, tablet and desktop. Can I open a psd with photoshop touch?

  • Noob: failed attempt to update inner join

    I'm attempting to update fields in joined tables bh and bhp, based on information contained in both. The updated fields are not the fields the tables are joined on. I'd expect that to fail but I can't figure out why what I'm trying to do fails. I've

  • Completeness of Prerequisites for Recovering Tables for PDBs from RMAN Backups

    Could you verify the completeness of following prerequisities on pag. 441 of the "Backup and Recovery User's Guide 12c Release 1 (12.1) E17630-14" Prerequisites for Recovering Tables and Table Partitions from RMAN Backups ■ The target database must b

  • How to selectivly Dequeue inbound transactions comming to B2B

    Hi If I have an 850 Inbound and 810 Inbound from two different trading partners and there are two BPEL processes defined to handle these 2 transactions how to selectively dequeue the transactions to the correct BPEL Process.