Satellite P70-A - installation of Win 8.1 Pro

We have acquired satellite p70 laptop with preinstalled windows 8.1.
On the other hand we have purchased a license for Windows 8.1 Pro
We install from the original DVD deleted the old partitions, but when the installation or just ask us license number and although I have to install drivers and other aparecion as follows version 8.1 no more.
We looked through the BIOS but do not see the option to disable to do a clean installation.
Thank you.

The whole posting is a bit confusing for me but let us try make some concrete steps what must be done.
Every notebook delivered with preinstalled OS has saved original recovery image on the HDD so before you do anything you should create recovery media with original OS version. After doing this you can change whatever you want. Using this recovery disc you can preinstall original recovery image again and have notebook with factory settings again. If I understand you right you didnt make this recovery disc so it is your big mistake.
Anyway, if you want to install own OS you must change UEFI BIOS settings and allow notebook to boot from ODD and install new OS. How to do this you can read on http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm
After clean OS installation all necessary drivers, tools and utilities you can download from http://www.toshiba.eu/innovation/download_drivers_bios.jsp
Check it out.

Similar Messages

Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

Hello!
I have problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no OS preinstalled.
I do the following:
1. Install Windows 7 x64, SP1.
2. Install LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE&partNumber=PSK30E-02T002B3&serialNumber=&USER_ACTION=Serial%20number])
3. Install all Windows Updates from Microsoft
4. Run Toshiba Software Installer for Win 7 - it installs a couple of drivers and then asks to reboot.
Here is the log file for the first try (win7update.log):
Update started 12\28\2011 at 21:11
Installed TVALZ_O.INF
Installed IO & Memory Access Driver
driver_bluetooth_TC00241200A.exe /s /log /test has been installed with the result code of PASS
util_tvap_TC00215000H.exe /s /log /test /wait15 has been installed with the result code of PASS
Update completed at 21:29
After reboot I run it again and the result is:
Update started 12\28\2011 at 21:38
Toshiba Bluetooth stack has already been installed.
Toshiba Value Added Package has already been installed.
Update completed at 21:40
Any help is appreciated!
Thanks in advance!

You are right this notebook model was delivered without OS.
Win7 64bit is supported for this notebook model and all necessary drivers, tools and utilities are available on Toshiba download page.
What I can say is that all this stuff must be installed in right install order. I know it sounds stupid now but I recommend you to make clean OS again and continue installation following this installation order:
Win7 SP1
Intel Chipset SW Installation Utility 9.2.0.1015
TOSHIBA Supervisor Password Utility 4.8.6.0
TOSHIBA HW Setup Utility 4.8.6.0
TOSHIBA Bulletin Board V2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Management Engine Interface 7.0.2.1164
NVIDIA Display Driver 8.17.12.6669
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Value Added Package 1.5.4.64
USB3.0 Driver 2.0.32.0
NVIDIA HD Audio Driver 1.1.13.1
Conexant Audio Driver 8.51.1.0a
Intel Wireless LAN Driver 14.0.2.2.1.s64_wCAT
or
Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
or
Realtek Wireless LAN Driver 2.00.0013
TOSHIBA Wireless LAN Indicator 1.0.3
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA Software Modem 2.2.97(SM2297ALS05)
Conexant Modem Driver 7.80.4.53
TOSHIBA HDD Protection 2.2.1.12
Atheros Bluetooth Filter Driver Package v1.0.7
Bluetooth Stack for Windows by Toshiba v8.00.04(T)
Atheros LAN Driver 1.0.0.46
Realtek Card Reader 1.0.0.12
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition V3.1.8
TOSHIBA eco Utility 1.2.25.64
Intel Proset 14.0.2.0.1.s64_wCAT
Intel Wireless Display 2.0.29T
TOSHIBA HDD_SSD Alert 3.1.64.7
TOSHIBA Service Station V2.1.52
TOSHIBA PC Health Monitor 1.7.4.64
ConfigFree 8.0.37
TOSHIBA Web Camera Application V2.0.0.19
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
PatchFiles$$2 PCIIDEREG-1.2
PatchFiles$$3 TosVolRegulator_x64_1.1
It is very important to use right installation order.
Please post some feedback.

Satellite P70-A-120 - Win 8.1 booting problem

Hello.
I have a problem with the boot of my Satellite P70.
The first time that I push the power button, it appears the screen with the Toshiba logo but Windows 8.1 doesnt start.
If I power off the pc with the power button and push the power button another time, appears Windows without problems.
Someone could help me?
Thanks!

Hi
First of all try to set the BIOS to default settings.
Power up the unit and press F2, now you should be able to access the BIOS.
Within the BIOS press F9 to get default values and save the changes pressing F10
After that check if the notebook would boot properly.
In case the issue would still persist, disable the fast startup as described here:
http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
Feedback would be appreciated

Satellite P70-A-11V - does HDD protection work without accelerometer?

Hi all,
I am new here.
I already made another post. In brief, I am pretty much expert in Toshiba Satellite laptops, but my new one, Satellite P70-A-11V, a high-end professional laptop, had some issues. It came with Windows 8, which I upgraded to 8.1. Unfortunately, the system degraded so bad that all pendrives made it crash. I connected my Toshiba camcorder to it, and it also crashed the laptop.
The search indexing was not working outside the C: drive. The pointer of any optical mouse started to freeze for seconds on the screen.
This latter I believe was due to underpowered USB ports.
So, I really had no choice after 2 total system restores, and installed Windows 7 Enterprise x64, SP1. The OS looks almost ok, but I still have problems, and one of these is that however I try to install the accelerometer utilities, there is no driver.
I tried the one for Windows 8 x64, but it just does not appear on the services list.
I found that the HDD protection utility was also stopped, and I searched this forum, and someone told that the Intel Rapid Storage technology should be uninstalled. I did so, and my HDD protection is running... but I am not sure if it is effective!
I remember that with the Windows 8.1, the utility always showed a message on the upper right corner: Vibration is detected etc, that the disk is temporarily shut down etc.
It was associated with some high pitch noise indicating that the disk was indeed stopped. Now I can shake the laptop, but no message pops up, no sound is heard.
I checked all the checkboxes at the HDD protection interface to indicate if there is vibration, but so far nothing. The HDD protection is up and running, but in the absence of accelerometer utility, the HDD protection just does not know when to act.
Am I right? Can Toshiba medicate this?
All answers are greatly appreciated.

Hi
Toshiba drivers and tools released for Win 8 or Win 8.1 are not fully comparable with the Toshiba software available for Win 7 OS.
Some drivers and tools which are available for Win 8 dont exist for Win 7 system.
For example; the Accelerometer Utilities or HDD Protection Utility were released especially for Win 8 / Win 8.1 system and are not available for Win 7.
But for Win 7 you will find the Toshiba VAP (value added package) and this package installs a range of important utilities which are essential component of Windows system and this VAP is required to make the other TOSHIBA original programs work properly.
Therefore you should install the VAP as first Toshiba tool to ensure that other software like HDD/SSD Alert Utility or PC Health Monitor

Need wireless driver for Satellite P70-A-129

Hello to the Community.
I have reached a dead-end and after hours of efforts I need your input.
I have installed Windows 7 x64 on my Satellite P70-A-129 and although
I have downloaded all relevant drivers from the official support page,
and tried them all (Atheros/Qualcomm, Intel, Realtek)
the Wireless adapter is not functional as none of the drivers seems to be
the one needed.
All other subsystems/drivers are fully functional. I would enormously appreciate any
input as to where to look/what to do next.
Thank you in advance
Vassilis

Yes, BT installed without problems.
Intel driver, Intel Proset application, Realtek driver, all installed without problems.
The Atheros driver completed the installation but reported that it cannot find the adapter.
In ALL of the above cases the wireless adapter appears with the yellow exclamation point, just as
when there are no drivers at all.
At this point I must mention that the wireless adapter was fully functional right out of the box (Windows 8.1),
so there is no hardware problem (the laptop is two days old).
Right now I am re-installing W7 (after so many trials and since I am not going to proceed with
s/w installations unless all hardware components are fully functional) I figured what the h*** let's
try fresh......

Toshiba satellite p70-A dead after update to bios v 1.5

hi there i have toshiba satellite p70 with win 8.1 after updating bios from v 1.40 to v 1.50 the windows don't stop to give me blue screen . i try ti install anther version of Win but i have the same problem.plz help me

Satellite P70-ABT3G22
Bug Check 0x113: VIDEO_DXGKRNL_FATAL_ERROR
I reinstalled the windows 8.1 but the second error code is still happening,
If this occurs just after restoring the hard disk to its original out-of-the-box contents, then you have a hardware failure.
If you installed Windows 8.1 instead of restoring, you need to restore to factory-new from a recovery drive in order to be sure.

Lenovo System Update creating problems in fresh installation of Win 7

I'm hoping I can get help from this forum...
I have a Thinkpad R61 7742-CTO that has its original XP Pro operating system in day-to-day use. It's time to finally update to Win 7 with XP due to sunset soon. (Although I think Win 7 is visually ugly compared to XP)
I removed my "production" XP disk drive and did a clean installation of Win 7 Pro on the original purchase ("test") disk, including the 140-some MS updates available as of yesterday. Everything runs fine, including using Windows Update to search for new important and optional updates. So far, so good. I next went to Lenovo's website and downloaded the current version of Lenovo's System Update. Again, no problems once that particular program was installed. I installed Lenovo optional updates also without encountering problems.
However, when I load the Lenovo important updates, which include Access Manager, Power Mgr, etc., various intel and other "enhancements", things go wrong. If I click on Windows Update, for example, I get a message that it is not running. If I then do the net start/net stop wuauserv routines I found when searching the exact error message, I get the error: System error 5 access denied. I get the same message for several similar admin routines, particularly those involving "net".
I have tried many of the supposed repairs, including MS Fix-Its, that appear in Google when I searched the error message. None has worked. (A couple Fixits I did manually and got the Access Denied messages again) So I've rolled back using the restore point just prior to downloading the Lenovo programs, and everthing resumes working as expected.
It seems that the Lenovo downloads are interfering with something, particularly my admin rights, in some way. There's only one user (me) and it has admin rights, no password & etc. Other odd things are Access Connections is running as is the basic Win 7 network app in the system tray. Perhaps the Lenovo apps are interfering with the similar Win apps rather than replacing them as intended?
Can anyone suggest an approach to solving my problem?
Thanks,
Greg

Hello and welcome,
It may be that TVSU is "updating" the AHCI driver (Intel Matrix Storage Manager or Rapid Storage Technology) to one that breaks Windows update.
You can try rolling back the driver to an earlier version or going to the Intel site and getting a later one.
http://forums.lenovo.com/t5/ThinkVantage-Technologies/ThinkVantage-System-Update-blocks-Windows-Upda...
Z,
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

BO XI 3.1 Installation in Win 2008 R2. CMC & Infoview not opening

I did a BO XI 3.1 SP3 Installation on Win 2008 R2 machine. The Installation was successful. I could connect to the CMS from Client Components (Rich Client, UD, etc.,).
But CMC & Infoview are not opening... I mean the page shows blank without promoting for BO Login Credentials. I'm thinking the problem could be around Tomcat Configuration / something... The system doesnot have IIS. Tomcat version is 5.5.
Any help would be appreciated.
Thanks & Regards,
Madhu

hi there....
i am installing bo edge with data integrater xi3.1 sp3 on my windows server 2008 standard 32 bit edition. after installing, the application like infoview, designer all can work but my data services cannot work. Why is this happening? I already also disable the UAC control setting for the windows server 2008. The error says that "businessObject Data Services service manager has stop working." Log Name:      Application
Source:        Application Error
Date:          20/12/2010 1:48:11 PM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      WIN-DC9EBRXZAMW
Description:
Faulting application al_jobservice.exe, version 0.0.0.0, time stamp 0x4924d7fe, faulting module al_jobservice.exe, version 0.0.0.0, time stamp 0x4924d7fe, exception code 0xc0000005, fault offset 0x00017fde, process id 0xe14, application start time 0x01cba0097ca93ac6.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-20T05:48:11.000Z" />
    <EventRecordID>3572</EventRecordID>
    <Channel>Application</Channel>
    <Computer>WIN-DC9EBRXZAMW</Computer>
    <Security />
</System>
<EventData>
    <Data>al_jobservice.exe</Data>
    <Data>0.0.0.0</Data>
    <Data>4924d7fe</Data>
    <Data>al_jobservice.exe</Data>
    <Data>0.0.0.0</Data>
    <Data>4924d7fe</Data>
    <Data>c0000005</Data>
    <Data>00017fde</Data>
    <Data>e14</Data>
    <Data>01cba0097ca93ac6</Data>
</EventData>
</Event>
>anyone face this error before and how to solve this issue? Need help ASAP because need to configure it to customer.
Regards,
Teerin

Second Hard Drive for Satellite P70 A01d Help

I want to install a second hard drive in my laptop. I have a 2tb Samsung Spinpoint M9T, however the hard drive has 4 extra pins which don't connect to the laptop. Do these pins need to connected or is there something else i can do to onnect the hard drive?
You can see what I mean in the pictures.
Solved!
Go to Solution.
Attachments:
1_Hard Drive.jpg ‏204 KB
2_Laptop.jpg ‏106 KB
3_Connected.jpg ‏661 KB

Thank you
One last thing though. To install the hard drive, will inserting it and connecting a bracket like this one, http://www.ebay.com/itm/A000240320-Toshiba-Satellite-P70-HDD-Brackets-/161458370320?pt=LH_DefaultDom... be all that's required?

SAP R/3 4.7 INSTALLATION ON WIN-2000 ADVANCED SERVER.

Hello!
IS THERE ANYONE WHO CAN HELP ME?????????
Dear, plz. Give me the steps for sap r/3 installation on win 2000 advanced server.
I am not having password for sap community market place.
So, iam not able to get the steps for installation I AM HAVING THE FOLLOWING CD'S
1) SAP 4.7 GUI
2) JAVA
3) SAP KERNEL
4) ORACLE 9.2.1- 3 CD'S
5) SAP EXPORT- 7 CD'S
Plz. Help me in this.plz.mail me on my ID- [email protected]
Thanks & regards,
Sandeep Chaudhary
m-09312406060
0129-3260483,4120483

how come you have the cds and no access to sapnet? strange....
basically these are the steps:
-> install win 2k server
-> check for all hardware and software requirements (needed for sap installation)
-> install oracle server 9.2 and the appropriate patchset (being 9.2.0.8 at the time) and the interim patches (opatch)
-> install sap central instance using sapinst (you will be asked for the different cds such as java, kernel etc.)
-> install sap database instnace using sapinst (you will be asked for the different cds such as java, kernel etc.)
-> apply post-installation steps
but: without the installation guide and the relevant sapnotes it will be difficult to succeed....get access to sapnet asap!
GreetZ, AH

Hi. I am running Windows 8.1 on a 64 bit Toshiba Satellite P70-A laptop with 16Gb of RAM. I have installed Adobe Creative Suite 6 - Master Collection. All is fine except for Adobe Acrobat X. It runs OK for a while, but then suddenly it won't work. I uni

Hi. I am running Windows 8.1 on a 64 bit Toshiba Satellite P70-A laptop with 16Gb of RAM. I have installed Adobe Creative Suite 6 - Master Collection. All is fine except for Adobe Acrobat X. It runs OK for a while, but then suddenly it won't work. I uninstall it, re-boot and re-install again, bit the same process repeats itself and once again I have to uninstall and re-install again. I don't know if windows update interferes with it? Has anyone else had a similar problem? Is it fixable?

I think you'd be much better off asking in the Acrobar forum, Acrobat

AIA FP 11.1.1.7 installation on Win 7 64 bit.

Hi All,
i am facing a nagging installation issue while installing AIA FP 11.1.1.7 installation on Win 7 64 bit machine.
Problem statement-
The dreaded PremGen error while AIA installation.
Summary of what had been done-
1) DB installed successfully.
2) SOA Suite installed successfully.
3) Node manager working perfectly- basically able to start and stop both the admin and soa servers successfully.
4) Modified the mem args both in setSOAdomainEnv.cmd,setdomainEnv.cmd and also in the aia installer oraparam.ini to 2048 (Max heap)
5) Changed the session time to "EST" in the DB session.
kindly suggest if i have been missing out on something or is there any patch that i am required to install for this to go through successfully?
Regards
Pranav 11g

Did you try with 1024 for memory.

Issues With CS4 Installation on Win 8?

I purchased CS4 (Web Premium) on disc several years ago, and it has been working fine on my Win XP computer ever since. The Adobe software has all the current updates, though I am using the CS4 version of Acrobat Pro (9.xx) rather than a more recent (free) version of Reader.,
Unfortunately, my computer's hard drive has fried, and I just purchased a new Windows 8 machine, which will arrive shortly. I am trying to determine:
1. Are there any general issues with CS4 installation on Win 8 that I should know about in advance?
2. Are there specific procedures (de-activation?) that I need to follow BEFORE attempting the installation on the new computer?
3. Other than specific user issues, are there problems with CS4 versus Windows 8 that I would not encounter with Windows 7.
I enhance photos and create web sites for a living, so the CS4 installation is mission-critical. I am hoping I did not make a mistake in ordering a Win 8 machine...
Thanks for any and all insights.

OK, fair enough. Maybe someone who has actually experienced this situation (CS4 --> Win 8 machine) might see this and offer some tips to avoid hassles. But I will try the install as soon as I get the new machine and post any ensuing issues/problems here.
As for de-activation of the previous installation on the XP machine, that is now impossible, as the hard-drive is fried. Unless there is a way to de-activate an installation some other way (without actually opening the programs). That said, I AM able to access files on the fried harddrive, so if there is a specific file that controls de-activation, I could access it on the old machine. However, I may not be able to actually RUN said file on that machine, but can copy it to a stick and move it elsewhere. So, any thoughts on deactivation of an installation on a deceased computer?

MSCS cluster installation on win + sql server 2005

Dear Guru,
I want to installing MSCS cluster installation on win 2003 ENT.with sql server 2005 .
Choosing High availability (ABAP)
Please Guide me prerequisit & partation on local & shared disk.
Its Urgent.
Personal mail ID is [email protected]
Regards
Amol kulkarni
Message was edited by:
amol kulkarni

Hi,
You know what ?
Step by step installation is different in every company because each company has a different usage of SAP software.
It is precisly your job as a SAP sys admin, to study the problem, to solve it and to write the step by step documentation.
In my company, it took me one month and my documentation is 250 pages long.
You will not get someone else doing YOUR job instead of you.
The standard SAP documenation is perfectly enough to study your particular case...
Good luck !
Olivier

I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software.

I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software. I can buy these softwares.

http://www.simplehelp.net/2009/02/02/how-to-install-windows-7-in-os-x-using-para llels-desktop-a-complete-walkthrough/
http://blogs.parallels.com/consumertech/2011/10/24/install-windows-right-from-wi thin-parallels-desktop-7-guest.html

Satellite P70-A - installation of Win 8.1 Pro

Similar Messages

Maybe you are looking for