Satellite P745 Audio Jack / Headphone jack not working

Good day to all,
I have recently performed a fresh install of Windows 7 Ultimate on my Toshiba Satellite P745, and manually installed only important drivers (NVDIA and Intel Graphics, Realtek HD Audio Manager, etc.). I do not prefer the built-in restore factory settings of Toshiba, because I have tried using that before and it only degraded the performance of my laptop. I am using an external speaker instead of the built-in speakers of my laptop, because my harman/kardon is already broken, and after installing Windows 7, everything is working. 3 days after the installation, I cannot hear anything anymore from my external speaker. I tried reinstalling the Realtek HD Audio Manager (its version is 6.0.1.6305), but it still did not work. I tried as well to use other versions of the driver such as 6.01.7368, still it did not work. Lastly, I tried to perform system restore to the date when my speakers were still working, but it did not help at all.
I was also able to verify that my external speaker is not broken, because I was able to use it on my personal desktop, and alternative OS for my laptop which is Ubuntu 14.04.
I would greatly appreciate any help.
I've read on some queries posted here that people are asking for the id of the driver for some reason.
Here is mine:
HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_1179FC88&REV_1001
HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_1179FC88
Thank you to those who will help!

Hashtanksale,
Not sure about Win 7 ,however, I had a similiar problem with Win 8.1. I wanted to upgrade from a Gateway netbook running XP. I bought a HP x2-k010nr running 8.1 from OfficeMax and it stopped working,died, after 8 hours. Well took it back and exchanged it for another HP x2-k010nr and it lasted two days. The software would listen to the external combo jack mic, however, mostly to the internal mic. Exchanged it for an Asus Transformer and it lasted two days and had the same problem. Returned it and got a full refund. Seems there is a conflict between Microsoft and their vendors. If possible return your machine ASAP and wait for this issure to be resolved.
Ham123

Similar Messages

I recently installed vista to my mac (32bit)...my headphones are not working. I can't find the 3.5mm jack that apple suggests using. I have tried installing/unistalling several different audio drivers. Does anyone know how to solve this problem?

I recently installed vista to my mac (32bit). My headphones are not working on it. I could not find the "3.5mm jack" that apple suggests to "solve" this issue. And I have tried installing/uninstalling audio drivers. Can anyone help?

you don't need several drivers, you just need the audio driver for your Mac, which you didn't list, but would be Cirrus or RealTek.
Along with uninstalling programs, go to Dev Manager and uninstall driver, or even rollback driver.
some people have trouble installing or finding driver that will install.

The audio out (headphone jack) stereo just stopped working.

The audio out (headphone jack) stereo just stopped working. On all my head phones (which work fine on other devices), macbbok pro sound is only coming through the left speaker. Anything I can do about this, aside just bringing it in to the shop? btw: audio output is set to middle.

Before taking to the shop, try Reset PRAM.
Some sound settings are stored in PRAM.
Even though the article title says 10.7 it is applicable to 10.4.
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html

Why magic jack apps is not working on my iphone 5?

why magic jack apps is not working on my iphone 5?

I have the same problem. I contacted magic jack, and after more than an hour of waiting, here is the final part of our discussion, before I had to leave to go to work:
Me: the magic jack app has worked fine for months unregistered. Never had a problem before. I must go to work now. I will leave the chat box open. if you could, send me a list of possible fixes and I will try to apply them when I get back. Please write in detail. Is there a way that I can get in touch and get a senior rep on right away to handle my problem when I get back, or do I hae to wait again when I call next time?
Kara: I am one of the senior rep here and in fact one of the supervisors . Here is what you are going to do:
Kara: Once you register the magicjack app into your Iphone, we can refresh your account connections here manually however if you dont register it, no options in our end to work for your connections since the MJ app is not used to be registered. No worries, we can remove your account if you dont want the service anymore for free.
+++++++++++++++++
So, it would seem that either there is a problem that they don't know about, or else magic jack is trying to force everyone to not choose option 3 on the opening screen, the one which allows you to continue to make a call without registering.
Has anyone received a solution to this problem from magic jack support?

Why do regular stereo mini jack headphones no longer work in macbook pro

I have a macbook pro (2009) v10.9.5, 2.53GHz Core 2 Duo. Lately normal non apple stereo mini jack headphones no longer work. The jack doesn't cut the speaker sound as normal. It wasn't like this until comparatively recently. Apple iphone headphones do work.. is this a software or hardware problem?

That is odd. Try a NVRAM reset:
https://support.apple.com/en-us/HT204063
Ciao.

One headphone does not work or works 50% of the time. What is best way to resolve?

one headphone does not work or works 50% of the time. What is best way to resolve?

First of all, I'd recomend resetting the iPod. Do this by pressing the 'Menu' and 'Center" buttons for 10 seconds or until the Apple logo appears.
If this doesn't work, then it sounds like a hardware fault.
To identify the issue, if you have one, try plugging the iPod into a speaker through the dock. If this works, then the issue is with the headphone jack. If not then the logic board is dead. If the iPod is less than a year old, then it can be repaired by Apple for free. Just book an appointment for the Genius bar.
If not then, you could see about sending it to an iPod Repair Company, such as my own. A replacement headphone jack would cost £30.00 in the UK, including next day delivery. Other companies you could try would beUKiPodRepairs, but we guarantee to beat any quote that you get.
Hope that this helps,
Mark Sweeney
Dr Pod Founder

HEADPHONES do not work when plugged in - iMac Intel

So I reinstalled the operating system a few months back. After completing this my headphones do not work when plugged in. I do have them plugged into the correct jack. When i plug them in the built-in speakers go silent for a second or two as if the headphones are working but then the speakers kick back in with no sound in the headphones.
The headphones worked just prior to reinstall so I'm not sure its the jack itself but something in the operating system.
I have also checked in System Preferences 'Sound' and when they are plugged in, they do not show in the devices window.
What the heck is going on? I've read in other forums that this seems to be something of a typical problem but have not found a solution to the problem.
thanks in advance for your help.
Message was edited by: ikuchyacokov

Welcome to the discussions.
Mate, it sounds more like a system glitch than a hardware issue. I too have been experiences some 'funky' issues. However, they have all been fixed by running Onyx disc maintenance software. Install Onyx and run 'automation'. You can cancel the disc checking operations on start up and ignore the back up disclaimer. Give it a go and post back with the results.
Onyx - http://www.titanium.free.fr/download.php?sid=6d79ad9269e8f01484b51a1056277186
Make sure you get the right version for your OS.

Headphone is not working after plugin pavillion dv6000 CNF6430M51

Product :        Hp Pavillion dv6000
Serial    :        CNF6430M51
Product no. : RG254UA
this is the first time i sending you my first problem
since i have formated my system my new headphones are not working after plugin i have intalled sp34200 aslo but it is not fix my problem
Please help me out this
reply soon as you can
thanking you
kareem...

Your models driver page is in the link.You need the 'Microsoft Universal Audio Architecture (UAA) Bus Driver' before   correct Audio driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=3245620&task=&
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Internal speakers and headphones are not working

I have hp g6 2231tx os Windows 8, brought it a month ago..now it's internal speakers and headphones are not working..I enabled in playback device from sound mixer and reinstalled drivers but still not working..it's because of hardware or software??

Hi,
It could be either Hardware or Software related, so try the following and let me know.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58517.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My headphone is not working on macbook air 11

I have a macbook air 11", and after upgrading to mountain lion, my headphones are not working.
I have tried with multiple headphones and multiple software (itunes, skype, etc.), and I can´t hear.

First, turn the volume up.
Just kidding.
Do the internal speakers work?
Check Audio MIDI Setup (Applications -> Utilities).
If all looks good but still no sound, ask yourself - and check - if any 3rd-party apps or drivers are installed and running (-> Login Items?) that deal with sound. Update to ML-compatible versions or completely remove them.

My speaker as well as headphones are not working in hp pavillion dm4 1101tx series

my speaker as well as headphones are not working in hp pavillion dm4 1101tx series

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp51501-52000/sp51937.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
If you still have no audio, open windows Control Panel, open Administrative Tools and open Services. Check that the following services are all showing as Status= Started and Start-up Type= Automatic
Audio Service
Multimedia Class Scheduler
Windows Audio
Windows Audio Endpoint Builder
If you need to make a change to any of the above, just right click the service and select Properties, then in the dropdown box next to 'Start-up type', select Automatic and click Apply to save the change. Then click the Start button.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Beats Audio Control Panel software not working after Windows 10 upgrade.

Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

Iphone 4 headphone socket not working headphones won't go all the way in

My iphone 4 headphone socket not working, the headphones won't go all the way in? any help, ideas?

I bough a new ipad two a few feels ago and still haven't managed to used any headphones with it.
It's very annoying as I'm currently in hospital and will be for a few more weeks and this being the reason I bought it!! Now I have to have it on very low volume and not use it in the evening

Audio CD import is not working the cd is ejected before itunes can read it

audio CD import is not working the cd is ejected before itunes can read it. Does anyone know how to fix this?
Lainey

Does this happen with all cd's or one in particular?
Reset the SMC http://support.apple.com/kb/HT3964
Reset the PRAM http://support.apple.com/kb/HT1379
Try a cleaning disc. You can get them at places like Radio Shack.
If nothing helps your optical drive has probably failed. You can replace it or purchase an inexpensive external drive. Don't buy the Apple SuperDrive as it won't work with macs that have a built in drive.

My headphones are not working on my I pod 5 they Work a little but then stop how can I fix them

My headphones are not working for my iPod 5 they work a little but stop how can u fix them

first line in return for warranty should be the place one bought the place
same with a car then you should not be expected to ship it to toyota in japan yourself
and if you coka cola have an issue you don't have to take direct contact to cola company and the likes...

I just to a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

I just bought a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

Hi there,
It sounds like your purchased content is not transfering via a flash drive. It may be easier to re-download this contnet directly from iTunes. Take a look at the article below for mor information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
-Griff W.

Satellite P745 Audio Jack / Headphone jack not working

Similar Messages

Maybe you are looking for