Satellite P75-A7200 headphone jack not recognized at all

model number PSPLNU-00H004
i've tried updating all drivers etc, still will not pick up headphones when i plug them in. scanned for new devices in device manager and it just sees microphone and speakers, nothing else.
any help would be appreciated

I am having a different headset related problem. the headset I am using is a turtle beach X12. the headset works like its supposed on every system I plug it into EXCEPT my new P75-A7200 with windows 8. the problem being very very low volume. this is a powered headset and even with the system volume at 100% and the headset volume at 100% all sounds are slightly above normal speaking volume. and if there is any backround noise at all I cant hear my game or movie at all.
I have gone through the system settings and made sure all volume setting were at thier max and still the volume is too low.
if I plug my headset in to any other system I own, be it my xbox 360 or my wifes laptop or even my desktop. I have to turn the system volume down. a LOT or risk having my ears blown out.
I'm hoping its just a software/driver issue and that its not because of a low cost cheaply made sound card.....

Similar Messages

Headphone Jack Not Recognizing Devices

Just stepped up from an old G4 iMac 17" to an slightly newer intel iMac 17" and I'm missing my old
clear plastic "ball" speakers. There is a different type of jack on these than the 1/8" input on my new (older) iMac so I can't use them. The built in speakers just don't do it for me on this current machine.
So to get to my point, I tried plugging a pair of powered speakers into the headphone jack and they were not recognized in the sound control panel. Tried with headphones and same thing. Only "internal speakers" appears in the control panel. I asked someone at an Apple store about this and he told me to look for a red light inside the headphone jack. If I saw red then this most likely would mean the jack is fried. I checked and did NOT see any red light.
Any suggestions ?
Thanks in advance !

Hi moJo
Sounds like a hardware problem with the Output jack, the sound card or that section of the logic board.
If you are stuck with that iMac for whatever reason, then your best bet might be to pick up a Griffin USB Audio Interface. > http://www.griffintechnology.com/products/imic/
Dennis

Headphones jack not working with all headphones

I recently experienced a problem when my headphones stopped working on my xperia z1 from one moment to the next. At first I thought the cord must have got cut, but the headphones were relatively new. Then I tried them on my laptop and they were working. However, when I used a friend's original xperia earphones, they worked on my phone. Also, radio does not recognise my headphones either.
I cleaned the jack port, cleared all cache for apps and cleared data from smart connect but nothing changed.
Any idea what the problem might be?
Thanks.

my guess is whilst you were at uni your phone OS must have updated. I use to be able to use any head phones till I updated one day and ever since never worked again taking a 2 ring plug..
I think The idiots at sony have changed the system to only support a 3 ring jack plug. Why I don't know. But all I know is that I want to find these people and slap the crap out of them with their stupid ideas and pure inconvenience

Toshiba Satellite p75-A7200 stuck on toshiba logo after bios change

My Toshiba Satellite p75-A7200 is stuck on toshiba logo after bios change.
entered bios fine changes from UEFI to CSM boot and now i cannot enter bios or boot past toshiba logo.
Ive tried F2 tapping and holding while powering up the laptop(tried every Fkey,DEL,ESC, with and without FN key)
cannot re-enter bios.
Also i tried to run the bios update cd created multiple 1.50 1.40 even 1.00, it doesnt seem to read any media.
i tried holding C, FN+C and f and just about every key on the keyboard to get something to work. i had dvd as top of boot priority for a while now so i shouldnt have to try f12 or holding C before boot but i tried . it doesnt seem to read any media
i tried windows 8 install cd, Ubuntu, centos, nothing goes past toshiba logo and no errors, i dont get the non bootable device error so its seems to not be reading the dvd. (dvd does spin and make read noises) im trying to find my usb floppy drive to try a floppy version but it acts like its not reading any media.
I also pulled the HDD and all usb devices to make the dvd the only media available and with the HDD out it spins then toshiba logo then black screen with solid white horizontal curser on top left of screen.(only happens when hdd out)
is there some type of key combination that will force a bios update or a crisis recovery mode for bios.
I also Pulled the battery for 2 solid days(battery,cmos battery, and power supply and held power button for about 10 mins while watching tx to make sure the thing was drained before the 2 day sit with no power at all.
this happened the second i changed from UEFI to CSM boot so its not a motherboard problem or anything like that because all was well before this setting change.
I already pulled the HDD and backed it up to another drive and swapped it to elimiate that.
any ideas on a secret key combo to force a bios read from dvd or usb or anythng.
or another combo that im just missing to enter bios after CSM boot.
UPDATE
to do a crisis recovery on this laptop
1 get a usb stick and format it in fat or fat32
2 download "7zip" and install it if you dont have it.
3 download bios from toshiba website.
4 run the installer for bios but dont choose and option just close it we just want to extract the files to the location normally c:\splnvxxx where xxx is the version number like 150
5 goto the installed locaion "c:\splnv150" or whatever number.
6. find file os2014273a_150 or something similar. it will be an application, it will end in version number _150, and it will also have a disc image file of the same name. but we want the app.
7. right click on it and you should have an option 7zip then extract
once extracted there is a folder now archesxxxxxx_bios_v150_win
8 copy the bios file located in archesxxxxxblahblah/X64/BIOS.fd , BIOS.fd is the bios and just copy that to a BLANK usb thumb drive that was formatted with fat or fat32.
9. put usb into your satellite and unplug the power from it.
10 holding FN + ESC key together plug the power back in and press power button.
11. release keys FN and ESC if all is right it will have the power button and led on from blink abut every 1 second while it searches for the bios. once its done it will reboot and you should be good to go.
if it keeps cycling with the power button then the bios is named wrong or something is not right with the usb. try reformatting it again and make sure that the bios file is the ONLY thing on the drive.

Ok a little research and digging into the bios exe downloaded from toshiba shows this has INSYDE BIOS witch should have a recovery process wich i prepared a usb stick with just the bios.fd on it found some post around toshiba forums with different models using win +B or Fn + F but neither of these worked for me to force bios update
anyone with this model know the key combo to force recovery

Satellite p75-a7200 error on boot. Please help ASAP.

Just bought this laptop for my daughter on Christmas. Here is the error information.
When I power on the system I get a blue screen with this on it.
Recovery
Your PC Needs to be repaired
The Boot Configuration Data file is missing some required information.
File: \BCD\
Error Code 0xc0000034
You'll need to use the recovery tools on your installation media. (And so on)
Press ESC for UEFI firmware Settings (This only puts me into system BIOS)
How can I make this recovery tool(s) when I can not even get into Windows 8?
Note: I have another laptop that I can use, but im not able to make a Bootable USB for some reason in Windows 7.

Satellite P75-A7200
In case Windows does not boot, you should be able to enter the recovery environment, which in Windows 8.x looks like the picture below.
From Troubleshoot you can go to System Restore, Safe Mode, Startup repair ("Automatic Repair"), a command prompt, the BIOS/UEFI, or even restore the hard disk to its original out-of-the-box contents from the recovery partition..
According to Microsoft, trying and failing to boot several times will eventually take you to the recovery environment instead. According to Toshiba, you can also get there by pressing F2 or the zero key on powering up.
Try many times.
Have you upgraded to Windows 8.1?
-Jerry

Satellite P75-A7200 Wireless Card Upgrade

Hello,
I was wondering if anyone has upgraded their Wireless Card in their Satellite P75-A7200. Until I got it home, I didn't realize that it was only a single band card and doesn't support 5ghz wireless N which is all I run my network on at home for bandwidth purposes since my neighborhood is flooded with 2.4 ghz users. It appears its a simple swap to change, but I need to know if if the Antennas support 5ghz.
According to Intel's Docs:
"Before installing Intel® wireless adapters supporting IEEE* 802.11a, verify with the laptop manufacturer that the laptop includes a 5GHz (802.11a) capable antenna..."
I was going to switch it out with a Intel Centrino Ultimate-N 6300 or Intel Centrino Advanced-N 6235 Wi-Fi plus Bluetooth
I'm just not sure about the midle antenna port that the 6300 has since the P75-A7200 only has 2 wireless
Attached is what adapter I currently have installed. (Intel Centrino Wireless-N 2230)
Any help is appreciated. I am a very technical person, so I'm not a noob at this. Thanks.
Solved!
Go to Solution.

I was finally able to extract the screw very gently with a power drill and #1 screw extractor. I then installed the new card in under 15 seconds. Booted right up and I had 5gz connectivity with upwards pf 160mbps (and I'm not even close to the router). No need to update any drivers. Definitly worth the $30 investment. Thanks to priuscat for providing the information on what card to get.
Attached is exactly how the new card looks from Amazon
Attachments:
20130926_224709.jpg ‏126 KB

Satellite P75-A7200 hard drive mount connector

I am missing the hard drive mount that secures the additional hard drive on the Satellite P75-A7200.
Does anybody know where I could find this piece?

About a month ago I replaced failed 20GB hard drive in a Toshiba Satellite Pro A10 with a 40GB Samsung 2.5" Hard Drive that I bought from PC World for 45 (ordered via their website using the collect@store option). Since then the laptop has performed without problems.The only minor annoyance is that the recovery CD's formatted the new hard drive with 2 20MB partitions rather than a single one of 40MB. The main thing to check if you are not replacing drives on a like for like basis is that the power consumption of the replacement drive is no greater than that of the original otherwise you could encounter overheating problems.
The smaller (20GB and 30GB) drives originally fitted to the A10 no longer appear to be readily available. A 40GB Toshiba 2.5" hard drive is available from MISCO for around 49+delivery.
Hope this helps.
Regards John Storey

My Satellite P75-A7200 won't boot

Hi all,
tried to update my Satellite P75-A7200 to 8,1 .
Now it won't start up anymore. It said no BOOTABLE DEVICE. I've tried to press F12 when turning on the computer; BOOT menu come up, I don't have the HDD RECOVERY option.
Can somebody let me know how to fix it or where I can get the RECOVERY MEDIA?
Thank you.

I found very interesting document about recovery options after system upgrade to Win8.1
http://aps2.toshiba-tro.de/kb0/TSB4403L30001R01.htm
I didnt test it because I have created recovery USB before I have started to change preinstalled OS and installed Win8.1 upgrade.
Please check it out and send some feedback.

My iPad mini headphone jack not working can you help

Wend I plug my headphones in to my iPad mini I have no sound coming of them can you help please.

Are you sure that they are plugged in all the way? It really takes quite a firm push in order to set the headphone jack into the opening all the way.

Satellite Pro A200-18P - microphone / headphone jack not working with Vista

Hi,
I have installed Windows Vista onto this laptop which was originally an XP, but I have not got the headphone jack working.
How do I turn it on or do I have to download it from toshiba website?

Hi
First of all you have to check if there is an special BIOS for Vista.
As far as I know some A200 series needs BIOS which was released especially for Vista OS.
I think the notebook needs Realtek sound driver.
Therefore in control panel you should see the Realtek HD audio manager.
Go there and you will see the mic and headphone jack on the right.
Click right there and check if there are some settings which have to be enabled.

My headphones are not recognized by the headphone jack.

This is an extremely chronic problem that I am getting very furstrated with and I would like it to be resolved soon.
Problem:
My speakers work perfectly fine, the problem is when my headphones are plugged in.
What happens when I plug my headphones in:
No sound comes out of them.
The little speaker icon on the top of the screen next to the battery charge and the internet signal turns grey.
When I press the volume buttons (F11 and F12), the speaker icon comes up on the screen, but the volume does not change and there is a small circle icon with a side slash through it.
In system /preferences/sound it doesn't say headphones, but it says digital out.
I have tried to resolve the issue multiple times by calling AppleCare and going into the Genius Bar.
PLEASE SOMEONE HELP ME. I WILL BE ETERNALLY INDEBTED TO YOU.
This is what has been done:
First time: The Genius plugged his headphones into the computer and it miraculously started working, then it stopped working when I got home.
Second time: A new logic board was put in the computer, three weeks later it stopped working.
I called AppleCare yesterday, the technician had me delete two files that started with com.apple... then reset the PRAM, it worked for half an hour, then it stopped.
I called AppleCare again today, but I was told to just plug the headphones in and out to toggle the switch in the headphone jack. It didn't do anything. Also, what is the purpose of that switch in the headphone jack?
The only time I have seen that red light being emitted was when it stopped working after the new logic board was installed. A red light was emitted from the jack when the headphones were removed for about an hour. Then it started working for 20 minutes, then it stopped, and no red light was being emitted anymore.

Try restart your iPhone before connecting. It can solve many problems.

Satellite P745 Audio Jack / Headphone jack not working

Good day to all,
I have recently performed a fresh install of Windows 7 Ultimate on my Toshiba Satellite P745, and manually installed only important drivers (NVDIA and Intel Graphics, Realtek HD Audio Manager, etc.). I do not prefer the built-in restore factory settings of Toshiba, because I have tried using that before and it only degraded the performance of my laptop. I am using an external speaker instead of the built-in speakers of my laptop, because my harman/kardon is already broken, and after installing Windows 7, everything is working. 3 days after the installation, I cannot hear anything anymore from my external speaker. I tried reinstalling the Realtek HD Audio Manager (its version is 6.0.1.6305), but it still did not work. I tried as well to use other versions of the driver such as 6.01.7368, still it did not work. Lastly, I tried to perform system restore to the date when my speakers were still working, but it did not help at all.
I was also able to verify that my external speaker is not broken, because I was able to use it on my personal desktop, and alternative OS for my laptop which is Ubuntu 14.04.
I would greatly appreciate any help.
I've read on some queries posted here that people are asking for the id of the driver for some reason.
Here is mine:
HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_1179FC88&REV_1001
HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_1179FC88
Thank you to those who will help!

Hashtanksale,
Not sure about Win 7 ,however, I had a similiar problem with Win 8.1. I wanted to upgrade from a Gateway netbook running XP. I bought a HP x2-k010nr running 8.1 from OfficeMax and it stopped working,died, after 8 hours. Well took it back and exchanged it for another HP x2-k010nr and it lasted two days. The software would listen to the external combo jack mic, however, mostly to the internal mic. Exchanged it for an Asus Transformer and it lasted two days and had the same problem. Returned it and got a full refund. Seems there is a conflict between Microsoft and their vendors. If possible return your machine ASAP and wait for this issure to be resolved.
Ham123

Audio jack not recognizing head phones

Just bought a new satellite, model C55-B5200. Long story short, the audio jack is not recognizing when headphones are plugged into it.
I have checked to make sure the speakers are enabled; they work fine. I uninstalled and reinstalled the realtek driver from the toshiba model page (2014-04-07 | Version: 6.0.1.7195 ) and am at a loss as where to go next.
Any suggestions are appreciated!

When you run the Windows Sound applet (enter 'sound' from the Start screen and select 'Settings') does the 'Playback' tab show any indication of headphones?
If you can select a Headphones device from the Playback tab, click the Properties button and check to make sure 'Device usage' is set to 'Use this device (enable)'.
Jim

Headphone jack not working on new Macbook Pro what is causing this?

My 17 inch Macbook Pro is less than two weeks old. The headphone jack does not recognize the headphones about half the time. This occurs with several pairs of headphones and yes, they are ther right size. This is really frustrating on a brand new 3500 dollar machine. What is causing this? It almost seems as if the headphones cannot make contact due to the fact that the connection is too far recessed. I don't live near an Apple store so dealing with this is going to be a P.I.T.A. Anyone have any ideas on how I might fix this issue? Thanks!

Hi, and thanks for your reply. I didn't have a red light emitting from the jack. I had already checked in the sound preferences to make sure the settings were correct. The headphones were not being recognized. This was not working with several differing sets of headphones. I made a phone appt. with Applecare. The laptop PRAM was reset and it works. There is still a bit of a delay when I plug in the headphones before they are recognized and I do feel the port is just a bit "off" as the no headphones plug all the way in. They seem to just sit almost flush but, not quite. However, resetting it resolved the issue to a satifactory level. Applecare said the issue was that not enough power was getting to that function on my laptop. They gave me the case number and I can use it if I have any further problem when I take the laptop in with me to any Apple service center. I was quite satisfied with how this was handled by Apple and if I have anymore issues will follow up.
I love this laptop but, even though this is working now I do feel that port is somewhat recessed a bit much.
I also want to add that this is my first Mac and despite having had this issue I was extremely impressed with the Applecare call that I got to help resolve this. One of the reasons I went with a Mac was the reputation for service Apple has. I was fed up with Sony to the hilt. I was glad I went with this Mac despite the headphone issue because had I still been with Sony, I'd have been give a major run around to deal with this issue. So far, Apple has tried everything possible to help me with this and assured me should I have any further issue they will immediately resolve it or give me a new machine. WAY better than dealing with Sony! I do not regret going with this MAC headphone issue or not!

Headphone jack not working iMac 10.5.8

While playing to the headphones the plug was pulled out of the headphone jack.
Sound plays through the external speakers but when the headphones are plugged in they are not recognized.
Tried a different pair of headphones and they did not work.
Both sets of headphones do work on another computer.
Reset the PRAM but still no recognition of headphones.
Plugged headphones in and opened the sound preferences.
The only choice is internal speakers and there is not a place to change the setting to audio output.
Restarted the machine with the headphones plugged in but still no recognition.
Any other ideas before I decide it's just a bad jack?

Sounds like the headphone port is damaged. Some USB audio solutions exist for the Mac. You may want to research those over trying to fix the soundboard.

Satellite P75-A7200 headphone jack not recognized at all

Similar Messages

Maybe you are looking for