Satellite P750 - Unable to connect external screen via VGA port

Hello All,
My problem is following:
I have been trying to connect my P750 (running on W7 x-64) to an external screen using the VGA port/cable. Unfortunately the external devices does not recognize my laptop. Laptop does recognise the external screen, you can see it in the graphic settings as additional display, but the screen says "no signal".
The computer always identifies the screen correctly, so it looks like there is communication from the screen to the PC, but not the other way round.
This has been checked with 3 separate screens and a TV - always the same. All the screens work properly with different PC's.
I already did:
- try to play with FN+F5 / "windows"+P buttons - no change
- install the latest BIOS and Video drivers from Toshiba website - no change
Any suggestions how to make it work? Is it possible that the VGA port is faulty?
Thank you in advance.

Hello and thank you for the tips,
I did try the options you suggested unfortunately with no success.
I actually got myself HDMI cable and this connection is working perfectly well. Luckily the very screen I want to attach my laptop to does have HDMI port. It is just a bit annoying to know that the d-sub port seems to be useless.
The lady from Toshiba tech support call centre suggested either OS re-install or sending it to Toshiba for repair/check as it is still under warranty. None of this options suites me at the moment, so I will probably stick to the HDMI. Still, I have a feeling it is a software rather than hardware problem.
Cheers

Similar Messages

Problem connecting external monitor on VGA port

I've had a Dell SP2309W connected to my Thinkpad W530 running Windows 8 Pro since I got it without a problem.
A couple of days ago I disconnected the monitor to plug it in to another computer to do something; after returning the monitor, it is no longer recognised as a SP2309W, but a "Generic non-pnp monitor". This is causing problems with my resolution. I only had the monitor unplugged for 30mins.
I've reinstalled the drivers for the monitor and the Nvidia adapter. It's a K1000M.
Any ideas?

BIOS settings are as follows:
Boot display device: Thinkpad LCD
Graphics Device: Nvidia Optimus
OS detection for Nvidia Optmus: disabled
I haven't chagned these settings.

Qosmio G30 - external screen via HDMI connection - bad resolution

Hi! This problem is driving me crazy, please help if you can...
I have just bought a G30-102 and I'm trying to use it with an external screen via the HDMI connection. The problem I'm having is that the native resolution of 1920x1200 cuts off the edges of the desktop and the quality looks terrible - its almost like the whole screen is zoomed in. I tried this with a BenQ FP241wz at first (which is 1080i 1920x1200) and the Toshiba helpline couldn't find a solution either - even after painfully reinstalling all of the drivers etc.
Its been going on for so long, I thought that I would try it out with my HDTV instead, just to be sure it wasn't a monitor issue. So I tried it with my Toshiba 32WLT66 - and have just found that it has exactly the same problem.
All of the display settings appear to be correct and the G30 is convinced that the output is correct, so the question I have now is - do you think that its a problem with my HDMI port?
Please help, I'm a designer and it is essential that I use the machine on a large screen. If this is a problem with the G30 hardware I need to talk to Toshiba immediately about replacing or fixing it.

Hi - thanks for the reply!
My BIOS doesn't allow me to choose much for the display - just between PAL and NTSC really.`As for the document, thanks for the link - unfortunately though there wasn't anything in it that I haven't already tried.
What would be the most obvious thing that could be wrong? Faulty port? Faulty card? Or could it even be as simple as a faulty HDMI lead?

HT4623 After ios update on my ipad mini i am unable to connect to internet via cellular connection

i Have update ios 7.0.2 on my ipad mini. But after update of ios 7.0.2 i am unable to connect to internet via cellulau connection. Cellular connection appears on my screen but i get error as "Could not activate cellular data network you are not subscribed to a cellular data service". Cellular connection was working prior to ios 7.0.2 update. Please help.

GOT MINE FIXED -
THE 7.0.3 update reported my iPhone as LOST or STOLEN to Verizon.
They suspended my iPhone service immediately (as I would expect them to) and THAT is why I couldn't get on.
Called Verizon wireless - they restored me in 30 seconds - EVERYTHING WORKS AGAIN.
They said "we've been doing this ALL MORNING."
Hope this works for others, too!
You blow bright orange chunks, Microsoft, er, I mean, Apple.

Unable to connect to internet via the proxy - Proxy set up OEM 12c

Windows server 2008 64 bit
OEM 12.1
I have to get agent software for Windows server 2003, and as far as I know the only way is through self update in OEM, is this the only way?
But when I input my Oracle support credentials I get an error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
Proxy settings in EOM are set for https, but not sure about the realm, I input our damain address "company.corp"
test successful :
https://updates.oracle.com was tested successfully using the Proxy.
Go to set oracle support credentials error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
In the emoms.log file :
2012-07-22 18:28:50,753 [EMUI_18_28_49_/console/admin/rep/proxy/server] ERROR core.patch logp.251 - [EM-01942] Unable to connect to internet via the proxy. Http Proxy - company:80. Destination URL - https://server:proxy/emd/main/. Protocol - https. Error Message - Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. ).
java.io.IOException: Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. )

Please check the following section in
http://docs.oracle.com/cd/E24628_01/install.121/e24089/firewalls.htm#EMADV626
Enabling Oracle Management Service to Access My Oracle Support
Unless online access to the Internet is strictly forbidden in your environment, Oracle Management Service should be enabled to access My Oracle Support. This access is necessary to enable updates and patches to be downloaded, for example.
At minimum, the following URLs should be made available through the firewall:
aru-akam.oracle.com
ccr.oracle.com
login.oracle.com
support.oracle.com
updates.oracle.com
About the dontProxyfor Property
When you configure the Oracle Management Service or a Management Agent to use a proxy server, it is important to understand the purpose of the dontProxyFor property, which identifies specific URL domains for which the proxy will not be used.
For example, suppose the following were true:
You have installed the Oracle Management Service and several Management Agents on hosts that are inside the company firewall. These hosts are in the internal .example.com and .example.us.com domains.
You have installed several additional Management Agents on hosts that are outside the firewall. These hosts are installed in the .example.uk domain.
You have configured Enterprise Manager to automatically check for critical software patches on My Oracle Support.
In this scenario, you want the Oracle Management Service to connect directly to the Management Agents inside the firewall without using the proxy server. On the other hand, you want the Oracle Management Service to use the proxy server to contact the Management Agents outside the firewall, as well as the My Oracle Support site, which resides at the following URL:
http://support.oracle.com
The following properties will prevent the Oracle Management Service from using the proxy server for connections to the Management Agents inside the firewall. Connections to My Oracle Support and to Management Agents outside the firewall will be routed through the proxy server:
proxyHost=proxy42.example.com
proxyHost=80
dontProxyFor=.example.com, .example.us.com
PS: Cygwin has nothing to do with My Oracle Support connection. Cygwin is ONLY required for agent deployment using agent push from OMS.

Lg m197wdp connect to mac via thunderbolt port

trying to connect mac to lg m197wdp connect to mac via thunderbolt port can not find a mac friendly software update and although the mac screen goes blank for a few seconds when TV is turned on the mac doesn't seem to recognise it as there.

Pinging is fine. How would I check the firewalls?
I also noticed this message in the system log:
/usr/libexec/sshd-keygen-wrapper: getnameinfo() only supports IPv4/IPv6. Connection from address family: 5

Satellite P750: Unable to install Bluetooth Stack driver on Windows 7 (x64)

Hello.
I own a *Satellite P750-02T* (Part no. *PSAY3A-02T001*).
In the order what I did:
1) I formatted its HDD and reinstalled OS to *Windows 7 x64 Ultimate SP1*.
Then I downloaded *ONLY BIOS and the drivers* from [its Downloads page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] :
2) I updated its BIOS to *v1.90* (the laptop came with v1.80)
3) I installed all the drivers:
- both LAN and WiFi
- Intel Chipset (latest available)
- all video drivers (Intel HD Graphics, NVIDIA Graphics, and Intel HDMI)
- Card Reader
- Realtek HD Audio (latest)
- Synaptics Touchpad
- USB3.0
- IR
- TV-Tuner
However, I'm *unable to install the Bluetooth driver (v8.00.06(T)* )...
When I run setup from the [above-mentioned page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it partially detects *'Bluetooth USB Controller-10 from TOSHIBA'* (USB\VID_0930&PID_0215&REV_001)
and then installation simply freezes displaying +'Installing the Bluetooth Driver. Please wait+.' and stays like that forever...
I also tried downloading a driver from [another location|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for TOSHIBA notebooks - v8.00.02(T):
and followed installation instructions displayed under 'Details'
but there was the same outcome - the setup simply freezes...
Installing Hotfix (*KB978258*) recommended there didn't work either - the message '+The update is not applicable to your computer+' pops up.
And I understand why - this Hotfix is [already included|http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] into Service Pack 1 for MS Windows 7.
I spent hours searching on the Internet for a solution. Although there were some similar cases none of the recommendations actually worked. I tried installing:
- WiFi driver before installing Bluetooth (someone suggested that those two are the parts of the same card);
- resuming installation in Safe Mode;
- *Toshiba Value Added Package* hoping those tools somehow will kick in.
Nothing worked...
It's interesting that when for the sake of experiment I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything run smoothly!
*Using Bluetooth connection on this laptop is very crucial for me.*
I hope I shall not have to return this wonderful notebook as I know TOSHIBA is one of the best manufactures and am sure there is a solution to this problem.
Thank you very much.
Evgeny.
Message was edited by: CVD
clarified about using another generic Bluetooth adapter with non-TOSHIBA driver

For FN functionality you must install Toshba Value added package. Toshiba flash cards utility is part of this package.
I dont know if P750 has WLAN switch but before you start BT installation be sure WLAN LED is ON.
BTW here is installation order for Win7 on Satellite P750 (European but the same order must be for your Australian model):
Win7 64bit SP1
PatchFiles V1.0
PlayReady PC Runtime V1.3
Sun Java2 Runtime Environment 1.6.0_20
TOSHIBA Assist 4.02.02
TOSHIBA Bulletin Board 2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Chipset SW Installation Utility 9.2.0.1015
Intel Management Engine Interface V7.0.4.1197
Intel Display Driver 8.15.10.2353
NVIDIA Display Driver 267.44
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Supervisor Password Utility 1.63.51.2C
TOSHIBA HW Setup Utility 1.63.1.34C
TOSHIBA Flash Cards Support Utility 1.63.0.12
TOSHIBA Value Added Package 1.5.4.64
NVIDIA HD Audio Driver 1.1.13.1
Realtek Audio Driver 6.0.1.6305
TOSHIBA Wireless LAN Indicator 1.0.3
Intel Wireless LAN Driver
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA HDD Protection 2.2.1.13
Atheros Bluetooth Filter Driver Package v1.0.4
Bluetooth Stack for Windows by Toshiba v8.00.06(T)
Realtek LAN Driver 7.038.0113.2011
Jmicron Card Reader 1.00.57.02
ENE CIR Driver V3.2
YUAN DVB-T/ATSC Tuner Driver V2.3.3.41
USB3.0 Driver 2.0.34.0
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition 3.1.9
TOSHIBA eco Utility 1.2.24.64
Intel Proset 14.0.2.0.1.s64_wCAT
TOSHIBA HDD/SSD Alert 3.1.64.8
TOSHIBA Service Station 2.1.52
HDMI Control Manager 2.0.0.7.64
TOSHIBA Remote Control Manager 3.0.6.1
TOSHIBA PC Health Monitor 1.7.5.64
ConfigFree
TOSHIBA Web Camera Application
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
TOSHIBA Resolution+ Plug-in for Windows Media Player 1.1.0
Intel Wireless Display 2.0.29T2
PatchFiles PCIIDEREG-1.2
PatchFiles
I hope this will help you a bit.

Unable to connect to Internet via Airport Express - 'cannot contact server'

I'm unable to connect to the internet via my Airport Express. I'm using OS 10.3.9, and had the same setup with no problems at a previous address, but with a different modem from the same ISP.
My AE is connected - the light is green - and my mac is connected to the network in Internet Connect. But when I open Safari I get an 'unable to contact server' message.
I've tried rebooting everything (modem, AE, Mac), and leaving modem/AE off for several minutes. Also reset the AE, but to no avail.
The connection works fine via Ethernet cable.
Any ideas?

Thanks, I checked out that advice doc (106798), but could not connect to the address (http://17.149.160.49) which is given to test if it's a DNS issue. My ISP says I shouldn't need DNS settings.
The service is PPPoE, and I went into Airport Admin Utility to check if the Airport was configured for this. Under Configure/Internet, I found it was set to 'Ethernet', so changed it to PPPoE. Then when I restarted I got connection status in the bar (and good Airport signal), but status flipped between 'looking for PPPoE host' and 'negotiating PPPoE host', sometimes sticking on one or the other each time I tried rebooting all gear.
Any other ideas?

Connecting external Screen with Toshiba DynaDock U3

Hi,
I have the following issue:
Bought two external Screens (Dell U2412M)
Notebook: ASUS Zenbook
Dynadock Station U3
Now, I connected the first Screen with DVI to the DynaDock and it works perfectly.
The Dockstation has only 1 port for DVI, so i had to connect the second Screen through HDMI, but unfortunately my dell Screens do not have HDMI Connection, but displayPort. so I bought a cable which can connect Displayport to HDMI. And i connected the Screen displayport with HDMI to the DynaDock.
Unfortunately my device do not recognize the second external Screen.
I have no idea why it is so.
Hope some kindly Person can help me.
Kind Regards,
Alessandro

>I have no idea why it is so.
Possible its not Dynadock issue
You should firstly check if the cable you bought is OK and would work without the usage of Dynadock
Connect an external monitor to HDMI port using this cable and check if it would work properly.
and just to confirm: the Dynadock U3 can handle up to 2 external monitors simultaneously.

Unable to connect to essbase via EAS & unable to create Planning Applicatio

we have 2 servers in our environment
Linux - Essbase Server
Windows - Planning, Reporting, EAS, Essbase client, workspace etc
when im trying to connect to essbase via EAS, i could not open the page.
Im also unable to create the Planning application.
We have installed essbase server on Linux Server and Essbase client and EAS on windows server and have configured these to a oracle 10g server.
Please give me your suggestions.
Thanks in Advance
Rao

Hi Rao,
Could you please post the error message?
Have you checked all previleges that you are using for login through EAS?
Check with also defaut username admin once.
Regards
Venkat G

Nokia 3230 unable to connect to internet via USB c...

when i use CA-53 cable to connect to internet using nokia pc suite7.0.8.2 (one touch access) an error message pops up "unable to connect to the speified device make sure the modem is configured properly" but i can easily connect to internet via bluetooth other functions like file manager , contacts , messages and back up can be accessed by using the CA-53 cable

I called a vw dealership (in South Australia) today because I have an iphone5 and a Tiguan and experienced the same thing (after i had purchased the lightening/30pin adapter).
I was advised that the media interface software is not compatible with iphone5. VW will eventually update the software according to ol'mate at the dealership, but it will be at an expense to the consumer allegedly.
I know that there is a iphone/vw media cable one can purchase from VW however, I believe this to only work with iphone4 or older?
Maybe try an older generation ipod to use for the car if all ur music is in itunes?
if anyone can correct me, I'd be more than happy to know... going to try my older generation ipad and see if there is any truth to the tale.... eventually. Until then i'll stream via bluetooth :-)
Sheree

Connecting external systems via JMS

Hello there!
I have this ATG MessageSink component connected on a sqldms queue named /integration/CustomerQueue, what is the best approach for connecting external system (like a standalone .jar) on ATG sqldms Messaging System, to post a message on this sqldms queue?
<message-sink>
     <nucleus-name>
          /integration/jms/sink/CustomerMessageSink
     </nucleus-name>
     <input-port>
          <input-destination>
               <provider-name>
                    sqldms
               </provider-name>
               <destination-name>
                    sqldms:/integration/CustomerQueue
               </destination-name>
               <destination-type>
                    Queue
               </destination-type>
          </input-destination>
     </input-port>
</message-sink>
Thanks!

Resolved.
I just created a ConnectionFactory and a Queue on Weblogic, than I created a JMSProvider on ATG and registered on dynamoMessagingSystem.xml:
Create a JNDI Reference for the ConnectionFactory created on WLS: /atg/dynamo/messaging/WeblogicJMSProvider
$class=atg.nucleus.JNDIReference
JNDIName=jms.ConnectionFactory
Register a Provider on: /atg/dynamo/messaging/dynamoMessagingSystem.xml



<provider>
<provider-name>
    weblogic
</provider-name>
<topic-connection-factory-name>
    dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
</topic-connection-factory-name>
<queue-connection-factory-name>
    dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
</queue-connection-factory-name>
<xa-topic-connection-factory-name>
    dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
</xa-topic-connection-factory-name>
<xa-queue-connection-factory-name>
    dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
</xa-queue-connection-factory-name>
<supports-transactions>
    true
</supports-transactions>
<supports-xa-transactions>
    false
</supports-xa-transactions>
</provider>
And finally create a MessageSink or MessageSource pointing the provider-name for weblogic
<message-sink>
<nucleus-name>
/integration/jms/sink/CustomerMessageSink
</nucleus-name>
<input-port>
<input-destination>
<provider-name>
weblogic
</provider-name>
<destination-name>
Integrations.CustomerQueue
</destination-name>
<destination-type>
Queue
</destination-type>
</input-destination>
</input-port>
</message-sink>

Unable to Connect error 948 via SQL

System Center 2012 DPM trying to connect to a SQL instance on a different server using Windows Authentication. Getting the unable to connect error "Unable to cnnect to xxx.domain.com (ID: 948) Verify that the DPM service is running on this computer",
I figured out that if you add the user to "sysadmin" in SQL management it works for that user. My question is, is this the best practices method of solving this problem? Will this need to be done for every windows user
that tries to access the DPM, or is there a more proper way?
Thanks

can anyone help?

Unable to connect remote databse via windows XP(using Instant Client)

I have downlaod instant Client and the PATH env variable automatically is set when I install Instant Client. Then I try to connect using the following(from the path C:/XEClient/bin):
sqlplus username/passwd@//host:[port][service name]
I get the following error:
ORA-12170: TNS: Connect timeout occurred
When I ping the host I get reply.
Also I am able to connect to that same database thru perl( so I presume there is no problem with the database not avaiable or port not open etc), where additionally ORACLE_HOME and ORACLE_SID env variable are set to the path in the remote machine. The databse version is Oracle 9.2
Below is the sqlnet.log:
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 30-AUG-2006 14:56:03
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: Message 12535 not found; No message file for product=NETWORK, facility=TNS
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Message 505 not found; No message file for product=NETWORK, facility=TNS
nt secondary err code: 60
nt OS err code: 0
Client address: <unknown>
===========================================================
Am I missing some set up.
Can anybody help please...I have been trying since last 3 days.
Thanks

Hi Laurenz,
Sorry to say...but it still does not connect(incorporated your suggestions), nor is the trace generated. sqlnet.log looks no different. As about any other oracle clients...I did not have any until yesterday evening when we installed the entire 10g oracle...client and database.
Anyways now too after having installed oracle 10g on D drive, no succes in connecting to remote databse.
Two questions:
1. Is XE client compatible with 10g database? As I am trying to connect to 9.2 version as mentioned in my initial query.
2. When I ping the host I do get reply. BUT when I telnet i.e.
telnet host port
....it says "could not open connection to the host, on port XXX: connect failed"
Does it mean there is a firewall at the remote end which is preventing the successfull connection? But then how do I connect thru' Perl with no extra info...
Any other suggestion please let me know...and also do you suggest I uninstall all oracle clients other than XE...or is there any way out ...having multiple clients?
Another query...hope I can use toad after having set up the XE client?
Thanks in advance...
Message was edited by:
user527367

ODSM unable to connect to OVD SSL admin port

Hi,
I have installed ODSM 11g on middleware server. OVD 11 is installed on a separate server.
OVD is up and running
When i try to connect to OVD SSL admin port using ODSM i am getting ODSM-00007 error.
ODSM-00007: SSL connection failed.
Cause: You may not have provided valid SSL port number and host. Or ODSM may not be able to read its trust store or may not have access to Credential Store Framework. Refer exception to find actual cause.
Action: Ensure that you have provided valid SSL port number and host details. Ensure that ODSM has access to Credential Store Framework and is able to read its trust store.
Level: 1
This is the error i am seeing in the log file
java.security.AccessControlException: access denied (oracle.security.jps.service.credstore.CredentialAccessPermission context=SYSTEM,mapName=ODSMMap,keyName=ODSMKey.Wallet read)
     at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323)
     at java.security.AccessController.checkPermission(AccessController.java:546)
     at oracle.security.jps.util.JpsAuth$AuthorizationMechanism$3.checkPermission(JpsAuth.java:378)
     at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:438)
     at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:460)
     at oracle.security.jps.internal.credstore.util.CsfUtil.checkPermission(CsfUtil.java:579)
     at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.getCredential(SspCredentialStore.java:410)
     at oracle.ldap.odsm.ui.common.Login$1.run(Login.java:696)
     at oracle.ldap.odsm.ui.common.Login$1.run(Login.java:693)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.ldap.odsm.ui.common.Login.getTrustWalletPwd(Login.java:691)
     at oracle.ldap.odsm.ui.common.Login.createTrustConnection(Login.java:773)
     at oracle.ldap.odsm.ui.common.Login.saveChanges(Login.java:211)
     at sun.reflect.GeneratedMethodAccessor230.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:812)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:292)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
Any ideas?
Ramnath

Nothing to do with LOOKUP
try below
1. Let Provisioning happen as it is
2. Open Create user task
3. attach "Disable User" task on SUCCESS response of Create user.
this will do your job
else use useraccesscontrol=514 or 2. for this you need to add extra field to process form and add another task in the process definition
regards,
nayan
Edited by: Nishith Nayan on Jan 31, 2012 10:51 PM

Satellite P750 - Unable to connect external screen via VGA port

Similar Messages

Maybe you are looking for