Satellite P750: Unable to install Bluetooth Stack driver on Windows 7 (x64)

Hello.
I own a *Satellite P750-02T* (Part no. *PSAY3A-02T001*).
In the order what I did:
1) I formatted its HDD and reinstalled OS to *Windows 7 x64 Ultimate SP1*.
Then I downloaded *ONLY BIOS and the drivers* from [its Downloads page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] :
2) I updated its BIOS to *v1.90* (the laptop came with v1.80)
3) I installed all the drivers:
- both LAN and WiFi
- Intel Chipset (latest available)
- all video drivers (Intel HD Graphics, NVIDIA Graphics, and Intel HDMI)
- Card Reader
- Realtek HD Audio (latest)
- Synaptics Touchpad
- USB3.0
- IR
- TV-Tuner
However, I'm *unable to install the Bluetooth driver (v8.00.06(T)* )...
When I run setup from the [above-mentioned page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it partially detects *'Bluetooth USB Controller-10 from TOSHIBA'* (USB\VID_0930&PID_0215&REV_001)
and then installation simply freezes displaying +'Installing the Bluetooth Driver. Please wait+.' and stays like that forever...
I also tried downloading a driver from [another location|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for TOSHIBA notebooks - v8.00.02(T):
and followed installation instructions displayed under 'Details'
but there was the same outcome - the setup simply freezes...
Installing Hotfix (*KB978258*) recommended there didn't work either - the message '+The update is not applicable to your computer+' pops up.
And I understand why - this Hotfix is [already included|http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] into Service Pack 1 for MS Windows 7.
I spent hours searching on the Internet for a solution. Although there were some similar cases none of the recommendations actually worked. I tried installing:
- WiFi driver before installing Bluetooth (someone suggested that those two are the parts of the same card);
- resuming installation in Safe Mode;
- *Toshiba Value Added Package* hoping those tools somehow will kick in.
Nothing worked...
It's interesting that when for the sake of experiment I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything run smoothly!
*Using Bluetooth connection on this laptop is very crucial for me.*
I hope I shall not have to return this wonderful notebook as I know TOSHIBA is one of the best manufactures and am sure there is a solution to this problem.
Thank you very much.
Evgeny.
Message was edited by: CVD
clarified about using another generic Bluetooth adapter with non-TOSHIBA driver

For FN functionality you must install Toshba Value added package. Toshiba flash cards utility is part of this package.
I dont know if P750 has WLAN switch but before you start BT installation be sure WLAN LED is ON.
BTW here is installation order for Win7 on Satellite P750 (European but the same order must be for your Australian model):
Win7 64bit SP1
PatchFiles V1.0
PlayReady PC Runtime V1.3
Sun Java2 Runtime Environment 1.6.0_20
TOSHIBA Assist 4.02.02
TOSHIBA Bulletin Board 2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Chipset SW Installation Utility 9.2.0.1015
Intel Management Engine Interface V7.0.4.1197
Intel Display Driver 8.15.10.2353
NVIDIA Display Driver 267.44
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Supervisor Password Utility 1.63.51.2C
TOSHIBA HW Setup Utility 1.63.1.34C
TOSHIBA Flash Cards Support Utility 1.63.0.12
TOSHIBA Value Added Package 1.5.4.64
NVIDIA HD Audio Driver 1.1.13.1
Realtek Audio Driver 6.0.1.6305
TOSHIBA Wireless LAN Indicator 1.0.3
Intel Wireless LAN Driver
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA HDD Protection 2.2.1.13
Atheros Bluetooth Filter Driver Package v1.0.4
Bluetooth Stack for Windows by Toshiba v8.00.06(T)
Realtek LAN Driver 7.038.0113.2011
Jmicron Card Reader 1.00.57.02
ENE CIR Driver V3.2
YUAN DVB-T/ATSC Tuner Driver V2.3.3.41
USB3.0 Driver 2.0.34.0
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition 3.1.9
TOSHIBA eco Utility 1.2.24.64
Intel Proset 14.0.2.0.1.s64_wCAT
TOSHIBA HDD/SSD Alert 3.1.64.8
TOSHIBA Service Station 2.1.52
HDMI Control Manager 2.0.0.7.64
TOSHIBA Remote Control Manager 3.0.6.1
TOSHIBA PC Health Monitor 1.7.5.64
ConfigFree
TOSHIBA Web Camera Application
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
TOSHIBA Resolution+ Plug-in for Windows Media Player 1.1.0
Intel Wireless Display 2.0.29T2
PatchFiles PCIIDEREG-1.2
PatchFiles
I hope this will help you a bit.

Similar Messages

  • Satellite L655-145 cannot install bluetooth stack

    Cannot install bluetooth stack. Setup programm just freeze. All other drivers installed successfuly. Device manager show only Bluetooth ACPI device. This problem appeared after updating BIOS from original version 1.80 to older (1.80->1.90->2.10->2.20). Downgrade to 1.80 take no effect.
    PS. Sorry for my bad english.

    Hi
    As far as I know the notebook is equipped with an WIFI and Bluetooth combo card!
    This means that Wlan and BT functionality is controlled by one card.
    If you downgraded the BIOS (dont know why) please set this to default firstly.
    Save the changes and reboot the notebook.
    Then download the BT stack from Toshiba BT portal.
    Enable the BT (FN+F8) and then start the BT stack installation once again.

  • Unable to install officejet 6100 driver on windows 7

    Hi I am unable to install the HP6100 Officejet All in one driver for WIndows 7 enterprise.  I keep receiving an error indicating that MSVCR90.dll is missing, but the file is there.  Any help would be appreciated.

    Hello jm092749.
    Welcome to the HP Forums.
    I understand you are seeing a "MSVCR90.dll is missing" error when trying to install your printer. I will do my best to assist you with this.
    This issue can be hardware or software-related. I located a complete guide to troubleshoot this issue. If you follow the instructions in order, you should be able to resolve the issue: How To Fix Msvcr90.dll Not Found or Missing Errors
    I believe the issue will be resolved after following these steps. If not, the computer is facing a hardware issue, and will likely need to be repaired. Either way, please post your results. If this was the information you are looking for, please mark this post with an Accepted Solution and Kudos. Doing this will allow others to locate this information easily.
    Thank you for bringing this issue to the HP Forums. Have a great day!
    Mario
    I worked on behalf of HP.

  • Unable to install Network Adapter Driver for Windows Server 2012

    Hi,
    We have purchased a new computer for our office. And on that machine, we want to install Windows Server 2012 Standard with GUI.
    Windows Server got installed on that machine. But we are unable to install drivers for our LAN card Intel® 82579V Gigabit Network Connection.
    Please help us to get it working.
    Thanks,
    Ronak Shah

    It is not working as the system is having Intel® 82579V Gigabit Network Card
    I guess, it's not supported on windows server 2012
    https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3299&DwnldID=18725&ProductFamily=Ethernet+Components&ProductLine=Ethernet+Controllers&ProductProduct=Intel%C2%AE+82579+Gigabit+Ethernet+Controller&lang=eng
    NOTE: The following devices do not have driver or software support for Windows Server
    2008 R2:
     - Intel® 82566MC Gigabit Network Connection
     - Intel® 82566MM Gigabit Network Connection
     - Intel® 82567LF Gigabit Network Connection
     - Intel® 82567V Gigabit Network Connection
     - Intel® 82577LC Gigabit Network Connection
     - Intel® 82579V Gigabit Network Connection
    Regards, Santosh
    I do not represent the organisation I work for, all the opinions expressed here, are my own.
    This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Blog |
    Wiki

  • Unable to install magic trackpad driver on Windows 7 on MBP

    I recently purchased a Magic Trackpad and it's working perfectly on the Mac side of my MBP. However, I downloaded the 32-bit driver for my Winfows 7 Bootcamp side and every time I try to run the driver I receive the following error:
    "Windows Installer
    The installed product does not match the installation source(s). Until a matching source is provided or the installed product and source are synchronized, this action cannot be performed."
    It then tries to point me to the following source "C:\ProgramData\Apple\Installer Cache\Boot Camp 3.0.0\". If I press OK it tells me that the file there is not valid. I also tried pointing it to the OSX install disc in my optical drive and it doesn't work. Any ideas would be greatly appreciated.
    Thanks!!

    Hi Stefan, I checked the version on my Boot Camp drivers and they are in fact 3.1. Checking a little further I seem to have found two issues:
    1. It seems that it's not only this, but any type of update I try to do it tries to find the drivers in folder 3.0.0.
    2. The Boot Camp install I'm asking help with is actually one I migrated to my new MBP using winclone. I moved from a 2009 2.4GHz MBP to a 2.66GHz MBP. I tried to update the old MBP's driver and it does so successfully, so this leads me to believe that the winclone install didn't go 100% perfectly. I will try to reformat my Boot Camp partition, reinstall Windows 7 and then try to update to see if this resolves the issue.
    Thanks for your help and I'll post back with my results in a couple of days.
    Message was edited by: sole2000

  • HP touchsmart 520, error unable to start bluetooth stack service

    I am wanting to use the bluetooth feature on my Touchsmart 520 for transferring pics, audio files etc.  My periphal device is a Samsung Galaxy S5.   My phone shows that it is paired with my pc, when i try to access via bluetooth I get the error message unable to start bluetooth stack service.  My Touchsmart uses the Broadcom adapter that came with the pc.  Help!!!
     CapnRon1

    Hello @CapnRon1,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues transferring files between your Samsung Galaxy S5 and your HP touchsmart 520 Desktop PC. I am providing you with some steps you can try below:
    Step 1. Go to device manager
    Step 2. Right click on "Bluetooth Peripheral Device" that you want
    Step 3. Select "Update Driver Software..."
    Step 4. Choose "Browse my computer for driver software"
    Step 5. Choose "Let me pick from a list of device drivers on my computer"
    Step 6. Select "Ports (COM & LPT)"
    Step 7. Select "Microsoft" at "Manufacturer" list
    Step 8. Finally select "Standard Serial over Bluetooth link"
    If you are still unable to pair with a Bluetooth device try the following:
    Step 1. Search for "Change device" in the Windows 8 Start menu.
    Step 2. Click on where it says Change device installation settings.
    Step 3. Select the No, let me choose what to do option.
    Step 4. Check the automatically get the device app option
    Step 5. Click Save changes to save the settings you just chose
    As well you can try this:
    Step 1: Go to RUN (Windows Logo + R) and type “services.msc” and Enter
    Step 2: Now find “Bluetooth Support Service” and double click on it
    Step 3: Now click on Log On Tab and Type in "Local Service" without quotes
    Step 4. Click on “This Account”
    Step 5: Now remove any passwords leave the password field blank
    Step 6: Underneath the upper left title should be a hyperlink "Start" Click it
    You can also check:
    Power Management tab and unchecked the box that said "Allow the computer to turn off this device to save power."  Problem solved.  Thank you for your willingness and persistance in helping me resolve the issue.
    I would be happy to assist you further is you require it, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Unable to install a software driver for Canon film scanner on mac OSX 10.6

    I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.
    I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Unable to start Bluetooth stack service

    I'm getting the message "Unable to start Bluetooth stack service" and cannot connect any new bluetooth devices. My notebook is a Pavilion tx 2000. Any ideas??

    Hi,
    Reinstall drivers for bluetooth module.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Installing 7.2. Says "Unable to install the gear driver set at this time...

    Hello, Im trying to Install ITunes 7.2, and I get this error:
    "Unable to install the gear driver set at this time. The GEARAspiWDM service use by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run itunes again"
    I am installing ITunes for the very first time on my comp, cuz I just received a new 2GB Nano.
    I've tried rebooting,tried uninstalling my Quicktime and removing it from my comp, uninstalled and cleaned any remnants of previous ITunes using the windows cleaner, disabling both my mcafee and pccillin, and it still comes up with the error.
    I'd be indebted to any suggestions or resolutions!
    Thank you!
    E Machines T6216   Windows XP  

    Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
    If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
    Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
    Hope this helps.
      Windows XP  

  • "Unable to install the GEAR driver set at this time...."

    Hello, I have been having trouble installing iTunes. I uninstalled it because I wasn't able to put songs on my iPod. And when I tried to reinstall it, I got this error:
    "Unable to install the GEAR driver set at this time. The GEARAspiWDM service use by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run iTunes again"
    First off, I don't even have iTunes installed any more. Second, I don't know what the heck the GEAR driver is.
    Please help!
    --Jon

    When you get this message, you may need to manually remove your gear drivers, see the following post which links to full instructiosn:
    http://www.gearsoftware.com/support/forum/viewtopic.php?p=3452
    It requires editing the registry so be careful.

  • "Unable to install the GEAR driver set." in Vista Premium solution!

    If you're getting the "Unable to install the GEAR driver set." error, go into regedit, navigate to HKEYLOCALMACHINESYSTEMCurrentControlSetServicesGearAspiWDM and delete the DeleteFlag key. Run the iTunes upgrade/setup package and iTunes should install correctly.
    If you get an error about explorer.exe being open, use the Tasks section of Task Manager to stop the explorer.exe application.

    Is this 64 or 32 bit Vista?

  • Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

    Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

    Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
    If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
    Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
    Hope this helps.
      Windows XP  

  • Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

    Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

    Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
    http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

  • Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2

    HI,
    I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
    Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
    Setup is unable to proceed due to the following error(s):
    Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
    Regards
    Anil Kumar

    You really need to do what error is suggesting.
    Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
    Nosh Mernacaj, Identity Management Specialist

  • How to install USB flash drive in windows 7

    Could anyone please help to install USB flash drive to Windows 7. This will enable me to hook up keyboard and mouse to my laptop. Thank you so very much for any assistance.   

    Hi,
    Could you please help us to know what is your computer, Please use the following instructions for find out the model/product of your machine:
      http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&​cc=us&docname=c00033108
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • 10.5.8- 10.6.4:  Have to Explicitly Explicitly Eject and Reconnect TM Disk

    On my Mac Pro, under 10.5, I've always had my TM disk connected via USB. I found that I could Sleep and wake the system as needed, and the TM disk would always appear on the desktop. After upgrading to 10.6.4, I find that I have to explicitly eject t

  • How to resolve damaged PDF file (via GUI_DOWNLOAD)

    Dear forumers, I am having problems with the GUI_DOWNLOAD method for downloading PDF files to the presentation server. The SY-SUBRC code is 0, and the PDF file gets downloaded and saved in the presentation server. However, opening any PDF files would

  • Can someone tell me why Safari windows follow from space to space?

    I open a new space via Mission Control.  I want to have only a couple terminal windows in there.  For some reason Safari windows follow me when I switch from one space to another.  Why is this?  It doesn't happen with email, Firefox, or any other app

  • Problem changing art work

    I have been to the link posted here . clicked on the tune gone to edit and get info go to artwork. Iv imported deleted dragged and added art work. It stays in the Bottom left of the window but the art work by the tune changes to something els or stay

  • SUS PO tables

    Hello, I have an inbound proxy from R/3 that sends POs and PO changes to SUS.  EKPO does not appear to exist on the SUS side.  I'd like to see the tables that SUS uses to store PO information.  Can anyone direct me to these tables? Thanks, Matt