Satellite P855-108 - PC health Monitor fails to update - Windows 8.1 update

Hello,
today updated to win 8.1 from a one year old windows 8, everything went fine
Then I followed Toshiba recommendations for updating the tools but despite doing exactly as explained the flash cards(and the functions buttons) are not functioning, they worked perfectly in win 8!
_The only utility that fails to update is PC health monitor,_ the version installed is 1.9.04.6402 and the one from support site for win 8.1 is 1.9.09.6400, when trying to install it fails with error message "not support"
When trying to open the installed health monitor there is also an error message "can`t get the bios type".
This is strange and every other utility recognizes the latest bios version 6.70 an the laptop`s details an serial
I tried all I could think about, installed flash card support tool from win 8, enabling and disabling in the bios, even installed VAP for win 8 but no change
Any help would be highly appreciated
Latest system driver and other tools are installed
Thanks in advance

Sorry for taking space on the forum,
_In case anyone is facing the same problem I managed to find a solution by my self,_
*it was caused by the old version of PC health monitor,*
uninstalled, updated to latest version
Now Function key utility and everything works as supposed, _the latest Health monitor also works fine_

Similar Messages

Cannot use HDMI port on my Satellite P855-108

Hi all,
I have a problem with my Toshiba Satellite P855-108.
When I connect the computer to a external monitor, this works perfectly with VGA but this does not work with HDMI (see error message here: [http://s4.postimg.org/5mzl8adnx/Erreur.jpg]).
I tested on 1 computer screen and 3 TV (with the certainty that the HDMI cable is ok).
One of these TV is a Toshiba TV with REGZA-Link.
Normally, the drivers are updated.
Thanks a lot for your help

Thank you for your feedback.
Hey ! I don't know how that is possible but *I just tried again now to answer your question and it works on my screen here !*
I will try on my TV this evening and I come back to you...
Maybe an automatic Windows update solved the problem...
Keep fingers crossed for the same result with my TV ;).

Satellite A660-17T - PC Health Monitor shows problem with battery health

I have an A660-17T which I've had since November 2010, I've used it a fair amount but not always on battery, I'd estimate that the battery has between 10 and 20 charge/discharge cycles on it.
I updated the BIOS to v1.80 when I first got the laptop, everything seemed to be fine. Recently, within the last 2-3 weeks the health monitor software is reporting that the battery is in poor health, showing that the capacity is reduced to 40% of the original capacity. I don't believe this as when I do run on battery I get several hours usage.
I have today updated to BIOS v1.90, although there is no changelog that I can find, it just says "improved features" or similar.
Is this really a failing battery, or is it somehow that the software is incorrectly reading the value of capacity from the battery pack due to a change in Windows or some other change in the system? I can't see how a battery can run for the same amount of time it always did and actually have a fault.
Any thoughts? Should I go back to the retailer and report this as a fault, or is it worth waiting to see if a future OS or driver update fixes this?
Thoughts welcome!

Hey,
> I don't believe this as when I do run on battery I get several hours usage.
That means you have the same battery remaining time as before you saw the error message from PC health monitor?!
In this case it seems that the battery is ok and maybe its just wrong information from the Toshiba tool. So I would recommend reinstalling PC Health Monitor that you can download from official Toshiba website:
http://eu.computers.toshiba-europe.com > Support & Downloads

Toshiba PC Health Monitor Compatibility Issues in Windows 8.1

Hi all,
I have just recently upgrading from Windows 8 to Windows 8.1
I noticed that the Toshiba PC Health Monitor does not work anymore. Are any of you experiencing this issue?

Here an thread about the same theme:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=73594
Uninstall the previous Health Monitor version and install newest available version from Toshiba driver page

Failed Update - Windows 8.1 Update

I purchased a new laptop in March running Win. 8. I updated to 8.1 and then the latest update. I downloaded drivers for my Photosmart 7500 and Officejet 6500A Plus E710n from the HP website. Everything works fine, but when I checked my update history, I have over 400 failed attempts to install something. I'm getting at least 30 a day. My officejet appears to be OK. The printers are set up wirelessly. I also have a Macmini and my printers are connected via USB. These are the messages in my update history.
"Hewlett-Packard - Imaging, Other hardware - Null Fax - HP Photosmart 7520 series"
and
"Hewlett-Packard - Imaging, Other hardware - Null Print - HP Photosmart 7520 series"
Installation Status: Failed
Hewlett-Packard Imaging, Other Hardware Update released in November, 2009
Error details: Code 80070490
I contacted the Microsoft forum, but they haven't replied.
I don't know if you can help me. It's probably a Microsoft issue.
Helen
This question was solved.
View Solution.

I thought I sent you a reply, but I can't find it. Thae document you sent from Microsoft didn't work. I followed all the directions and when I got to the command prompt and entered the command, hit enter, tried to enter the next command and nothing happened. The directions were to enter both commands hitting the ENT key after each one. Nothing happened and when I tried to exit, again nothing happened. So, it didn't work. I guess I have to deal with all the failed updates for my printer. At least the really important updates are woking OK. I guess all the HP Photosmart 7520 failed updates I'll just have to treat as nuisances.
Helen

WHY DOES BATCH MONITOR FAIL EVERY TIME SINCE LATEST OSX UPDATE?

I cannot get anything out of FCP5 into compressor without BM saying failed as server application quit unexpectedly!!!!????
This is supposed to be a commercial professional set of tools and so much of the time they just do not work!!!
Why is the BBC giving up Avid etc and moving down to FCP and compressor etc??
Sorry for the moan, I am at the point of throwing my G5away in frustration at this point.
Tom

Same is happening here.
I've tried the Pro-Apps update and trashed the files as instructed but Compressor's Batch Monitor quits unexpectedly.
Ahhh this is really frustrating, am on a tight deadline and really need it to work.
Weird thing is that once its quit its seems to still process the files, which is a worry as I can't trust the quality of what its doing. My client is going to kill me!
Apple sort your "Pro" apps out, they need to be reliable!

Re: Satellite P855-31V - Downgrade to Windows 7 and driver install order

I recently bought my first Toshiba laptop and after a few tries with W8, I would like to downgrade it to the previous version, of which I own a valid license of the Pro edition.
I checked which wlan card i had installed (my "PC Information" is below) and downloaded all 44 files available from support.
I updated the bios to 6.50, loaded the default values, changed the "secure boot" to disable and also changed the "boot mode" to csm boot. This allowed me to install W7.
I start installing the drivers: chipset, Intel display driver, Intel Management Engine Interface, Rapid Storage Technology Driver and some more and that's when things start to get ugly - some drivers aren't supported by W7, the nvidia drivers don't recognize the video card, upon reboot after installing some of the drivers windows starts to complain and tries to repair things. A mess.
Did I mess the order of the installs? If so, can anyone post the correct procedure? There are 44 files, some with names like "Toshiba System Driver", "Registry Patch"... I don't know when to install these, plus some of the other files don't have an accurate description.
If W7 can not run correctly on this machine I will have to upgrade it W8 Pro (as I need remote desktop), and again will have to install all drivers, so the correct order to install the drivers and utilities is still very much needed.
Thanks in advance for any helpful input.
*PC Information*
Model Name SATELLITE P855
Part Number PSPKFE-01400QEP
OS Version Microsoft Windows 8 6.2.9200
BIOS Version 6.40
CPU Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz
Physical Memory 8192MB RAM
Hard Disk Capacity 738,595,958,784 [Byte] 687.871 [GB]
Hard Disk Free Space Capacity 696,930,287,616 [Byte] 649.067 [GB]
Video NVIDIA GeForce GT 640M version=9.18.13.546
Screen Resolution 1920 x 1080 Pixels
Color Quality True Color (32 Bit)
Sound Realtek High Definition Audio version=6.0.1.6738
Intel(R) Display Audio version=6.14.0.3097
Network Realtek PCIe GBE Family Controller version=8.3.730.2012
Intel(R) Centrino(R) Wireless-N 2230 version=15.5.0.43
Modem None
Internet Explorer 10.0.9200.16466
IDE Device TOSHIBA MQ01ABD075
TSSTcorp CDDVDW SN-208AB FW version=TO04

>I checked which wlan card i had installed (my "PC Information" is below) and downloaded all 44 files available from support.
I checked the Toshiba EU driver page too.
I found only the Win 8 drivers for Satellite P855 PSPKFE
So possibly you have chosen the Win 7 drivers for another P855 series and therefore not all drivers were compatible
To be honest, the special order is not really necessary only few drivers require right order.
For example BT filter package needs to be installed before BT stack also the Toshiba VAP should be installed before other tools have been installed.

Cluster Health Monitor install

Hi,
I'm try to install Cluster Health Monitor for 11gR2 in Windows
The installation was success
But there is some perl script in the c:\"Program Files"\oracrf\install\crfinst.pl i have to run it
I try to run it as follow
C:\Grid_home\perl\bin\perl -Ic:\grid_home\perl\lib -Ic:\"Program Files"\oracrf\install\ c:\"Program Files"\oracrf\install\crfinst.pl -f ---> Not success " Invalid argument"
I thing the problem in the name "Program Files" bcz when i copy the folder and rename it ,it run but give me other problem i thing i have to run it from same Location "Program File"
but how??
Thanks in advance

sami wrote:
Hi,
I'm try to install Cluster Health Monitor for 11gR2 in Windows
The installation was success
But there is some perl script in the c:\"Program Files"\oracrf\install\crfinst.pl i have to run it
I try to run it as follow
C:\Grid_home\perl\bin\perl -Ic:\grid_home\perl\lib -Ic:\"Program Files"\oracrf\install\ c:\"Program Files"\oracrf\install\crfinst.pl -f ---> Not success " Invalid argument"
I thing the problem in the name "Program Files" bcz when i copy the folder and rename it ,it run but give me other problem i thing i have to run it from same Location "Program File"
but how??
Thanks in advanceit was unable to acces the file crfinst.pl
had better use/try like this c:\"Program Files\oracrf\install\crfinst.pl"
instead of "program files" use double quotes until the filename it will access
try it.

"PC health monitor driver" on Satellite L750D with Win 8 not working

Hi,
I use a Toshiba laptop (model: Satellite L750D psk4ye).
Yesterday I upgrade this Windows 7 to Windows 8 pro (32 bit).
I installed some driver but when I try to setup pc health monitor driver in my computer it is not working.
I try one more time but failed again.
Ive download again this driver from
www.toshiba.eu/innovation/download_drivers_bios.jsp but its not working.
Now what can I do. Please help me..........

Hi
Try to download the PC health monitor released for newer models like for example Satellite L870.
As far as I know it should be possible to install such tool since the health monitor isnt model specific tool.

Satellite L500-1XD - cannot find an update for PC health monitor

This TBS advises updates to PC health monitor and HDD/SDD alert.
HDD/SDD alert has a published update in the relevant downloads section but I cannot find an update for PC health monitor.
Any one got any bright ideas ?
Otherwise this seems quite a balanced system.

Hi Paolo30,
Thanks for your contribution. I agree with your model designation
I would like to download ver 1.5.6.0 but it does not seem to be listed on the download list (Two and a quarter pages long) for the L500-1XD on the Toshiba-Europe website. I am using I.E.8
Where are you seeing this listed ? Could you give me a URL please ?
It is an important update as it resolves a conflict between video streaming from HD and SMART HD messages as described in the TSB.
The only upgrade that is tagged as 1.5.6.0 is the Bullitin Board and this does not sound like the correct type of application. There was obviously a major update on 21/6/2010 there are 30 odd updates with that date.
Kindest Regards

Re: Satellite C855-1GQ - Health Monitor is unable to get the disk information

On my new C855-1GQ the 'Health Monitor' states that it is unable to get the disk information and so cannot use the alert function.
Is this normal?
I can turn this bubble off but just thought that I would ask anyway.
Thanks - Joe

This is just an notification so you can turn it off if you want.

Did you have Cloud start failures or a missing health monitor?

Calling all CQ Cloud'ers.
Hi, My name is Gary Gilchrist. I work with the engineering team for Adobe CQ Cloud.
Today I was running some diagnostics on our site. I see that there are a lot of you out there who have got as far as starting your own CQ Cloud. Congratulations!
But I also see a number of Clouds that have been attempted to be started by different tenants (that's you :)) and never made it as far as the "running" state. There are sometimes good reasons for this, sometimes related to configuration of your Amazon AWS key information. But we're still in Beta and I must admit, we know of a few bugs we still need to iron out.
I also see that some Clouds were started successfully, yet I do not see the automatic health monitoring that we record for your Cloud. We do that after a Cloud starts so that you can see the CPU, Memory and Disk health of your CQ instances running in your Cloud. You should see this as little green bars in your Cloud detail page.
I have two questions:
Did you attempt to start a Cloud (and you believe your AWS credential is valid) yet it failed to completely start up?
Did you start a Cloud successfully, yet you continued to see "unavailable" (gray bar) as the heath status for ALL the CQ instances in your Cloud? (please note that health monitoring for the Dispatcher is not working. It will fixed with our next update to the site, coming shortly).
If you did encounter 1 or 2 above please drop a reply on this thread giving only the name of your Cloud (no other personal information necessary) plus anything else you think is useful. We would like to look into it.
Thanks from the whole team here at Adobe for trying out CQ Cloud!
Gary.

1. Cloud start failure, cloud name: cf
I attached more details about the failure in thread Unable to start the cloud

Alerts subtab is missing Cannot find the Health Monitoring add-in

I'm running a Windows Server 2012 R2 with Essentials Services. I ended up switching domains with this server. I completely uninstalled Essentials server and all the dependent components with no reported errors.
I reinstalled everything with no errors. Now when I go to the dashboard I'm getting the following errors.
Alerts subtab is missing - Title
Cannot find the Health Monitoring add-in. Please verify and make sure that the add-in is correctly installed.
I tried uninstalling and re-installing Essentials a couple of times but with no luck.
Is there a way to repair this problem without wiping everything and starting over?
James Glenn

Below is what I found in the logs that seemed pertinent.
Those Dlls are there. I'm wondering if its a security issue?
[10344] 150206.045938.2075: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.2075: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.Console.AddIns.Computers.ComputersPage, ComputersUIAddin from C:\Windows\system32\Essentials\. It cannot be assigned to the requested type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.2075: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.Console.AddIns.Computers.ComputersPage, ComputersUIAddin
[10344] 150206.045938.2085: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Computers\computers.addin
[10344] 150206.045938.2095: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\GroupPolicyComputersTabExtender.dll: Cannot find the requested object.
[10344] 150206.045938.2105: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.2105: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.MailService.Addin.MobileDevice.MobileDeviceListPage, MobileDevicesAddin from C:\Windows\system32\Essentials\. It cannot be assigned to the requested type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.2185: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.MailService.Addin.MobileDevice.MobileDeviceListPage, MobileDevicesAddin
[10344] 150206.045938.2185: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Computers\mobiledevices.addin
[10344] 150206.045938.2575: GroupPolicy: CreateColumns entered
[10344] 150206.045938.2575: GroupPolicy: CreateColumns adding column
[10344] 150206.045938.2575: GroupPolicy: CreateColumns end
[10344] 150206.045938.2715: Dashboard.Forms: List view created
[10344] 150206.045938.2815: Dashboard.Forms: Details pane created
[10344] 150206.045938.3305: Dashboard.Forms: Creating TabPage for node D730AA04-07B1-4b9c-9DED-CCB0A723A8EB with display name "STORAGE" for TabControl
[10344] 150206.045938.3475: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\Microsoft.WindowsServerSolutions.Console.AddIns.Folders.dll: Cannot find the requested object.
[10344] 150206.045938.3525: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\Microsoft.WindowsServerSolutions.Console.AddIns.Drives.dll: Cannot find the requested object.
[10344] 150206.045938.3645: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\OIMAddin.dll: Cannot find the requested object.
[10344] 150206.045938.3715: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\Microsoft.WindowsServerSolutions.Console.AddIns.Folders.dll: Cannot find the requested object.
[10344] 150206.045938.3755: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\Microsoft.WindowsServerSolutions.Console.AddIns.Drives.dll: Cannot find the requested object.
[10344] 150206.045938.3855: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\OIMAddin.dll: Cannot find the requested object.
[10344] 150206.045938.4675: StorageOM: StorageBacked created successfully.
[10344] 150206.045938.4675: StorageOM: Set connection identifier to 1
[15084] 150206.045938.4795: StorageOM: Getting storage data from server
[10344] 150206.045938.5025: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.5025: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.Console.AddIns.Folders.FoldersPage, Microsoft.WindowsServerSolutions.Console.AddIns.Folders from C:\Windows\system32\Essentials\. It cannot be assigned to the requested
type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.5025: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.Console.AddIns.Folders.FoldersPage, Microsoft.WindowsServerSolutions.Console.AddIns.Folders
[10344] 150206.045938.5025: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Storage\serverfolders.addin
[10344] 150206.045938.5035: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.5035: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.Console.AddIns.Drives.DrivesPage, Microsoft.WindowsServerSolutions.Console.AddIns.Drives from C:\Windows\system32\Essentials\. It cannot be assigned to the requested
type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.5035: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.Console.AddIns.Drives.DrivesPage, Microsoft.WindowsServerSolutions.Console.AddIns.Drives
[10344] 150206.045938.5035: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Storage\serverharddrives.addin
[10344] 150206.045938.5045: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.5045: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.O365Integration.DashboardTabs.SharePointLibraryTabPage, OIMAddin from C:\Windows\system32\Essentials\. It cannot be assigned to the requested type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.5045: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.O365Integration.DashboardTabs.SharePointLibraryTabPage, OIMAddin
[10344] 150206.045938.5045: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Storage\SharePointLibraryTabPage.addin
[10344] 150206.045938.5055: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.5055: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.Console.AddIns.Folders.FoldersPage, Microsoft.WindowsServerSolutions.Console.AddIns.Folders from C:\Windows\system32\Essentials\. It cannot be assigned to the requested
type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.5055: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.Console.AddIns.Folders.FoldersPage, Microsoft.WindowsServerSolutions.Console.AddIns.Folders
[10344] 150206.045938.5055: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Storage\serverfolders.addin
[10344] 150206.045938.5065: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.5065: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.Console.AddIns.Drives.DrivesPage, Microsoft.WindowsServerSolutions.Console.AddIns.Drives from C:\Windows\system32\Essentials\. It cannot be assigned to the requested
type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.5065: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.Console.AddIns.Drives.DrivesPage, Microsoft.WindowsServerSolutions.Console.AddIns.Drives
[10344] 150206.045938.5065: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Storage\serverharddrives.addin
[10344] 150206.045938.5075: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.5075: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.O365Integration.DashboardTabs.SharePointLibraryTabPage, OIMAddin from C:\Windows\system32\Essentials\. It cannot be assigned to the requested type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.5075: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.O365Integration.DashboardTabs.SharePointLibraryTabPage, OIMAddin
[10344] 150206.045938.5075: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Storage\SharePointLibraryTabPage.addin
[10344] 150206.045938.5375: Dashboard.Forms: List view created
[10344] 150206.045938.5475: Dashboard.Forms: Details pane created
[10344] 150206.045938.6575: StorageOM: StorageBacked created successfully.
[10344] 150206.045938.6575: StorageOM: Set connection identifier to 1
[10344] 150206.045938.6675: DeploymentCommon: Failed to open deployment registry: StorageSpacesHidden
[10344] 150206.045938.6675: Exception:
An exception of type 'Type: System.IO.IOException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred.
Timestamp: 02/06/2015 04:59:38
Message: The specified registry key does not exist.
Stack: at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str)
at Microsoft.Win32.RegistryKey.GetValueKind(String name)
at Microsoft.WindowsServerSolutions.Common.DeploymentCommon.GetBooleanDeploymentData(String name, Boolean defaultValue)
[15084] 150206.045938.6735: StorageOM: Getting storage data from server
[10344] 150206.045938.6875: Dashboard.Forms: List view created
[10344] 150206.045938.6975: Dashboard.Forms: Details pane created
[10344] 150206.045938.7605: Dashboard.Forms: Creating TabPage for node AE5C17D3-0404-4d55-B638-CD22AB727070 with display name "APPLICATIONS" for TabControl
[10344] 150206.045938.7785: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\AddinAlerts.dll: Cannot find the requested object.
[10344] 150206.045938.7825: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\PinPointAddin.dll: Cannot find the requested object.
[10344] 150206.045938.8845: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\AddinAlerts.dll: Cannot find the requested object.
[10344] 150206.045938.8855: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\PinPointAddin.dll: Cannot find the requested object.
[10344] 150206.045939.0305: Dashboard.Forms: List view created
[10344] 150206.045939.0335: Dashboard.Forms: No IDetailContent was given; no need to create details pane
[10344] 150206.045939.4216: Dashboard.Forms: Creating TabPage for node 3ebe6ef4-03bb-4b7c-bf5a-9f2b4890e619 with display name "OFFICE 365" for TabControl
[10344] 150206.045939.4596: Dashboard.Forms: TabControl created. Name: PrimaryTabs, Tab count: 5
[10344] 150206.045939.6106: Dashboard.Forms: Page selected: ffc2b311-08ca-4200-9719-bf0119740eba
[10344] 150206.045939.9996: IDENTITY: ReloadUsersOnce
[25400] 150206.045941.1807: PfBinding: Information: [0] : Adding service dns identity [EDGE-ES] in proxy endpoint.
[25400] 150206.045941.2327: OPEUserListProviderAdorner: OPE is not enabled. no need to refresh.
[5764] 150206.045946.6732: AlertFramework: Subcomponent: Helper > Timeout value is invalid, using default service start timeout
[22312] 150206.045947.6803: OPEUserListProviderAdorner: OPE is not enabled. no need to refresh.
[10344] 150206.045947.8243: StorageOM: folder is not in correct state, so could not open False Healthy
[10344] 150206.045947.8273: StorageOM: folder is not in correct state, so could not open False Healthy
[10344] 150206.045947.8603: DeploymentCommon: Failed to open deployment registry: ServerBackupDisabled
[10344] 150206.045947.8603: Exception:
An exception of type 'Type: System.IO.IOException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred.
Timestamp: 02/06/2015 04:59:47
Message: The specified registry key does not exist.
Stack: at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str)
at Microsoft.Win32.RegistryKey.GetValueKind(String name)
at Microsoft.WindowsServerSolutions.Common.DeploymentCommon.GetBooleanDeploymentData(String name, Boolean defaultValue)
James Glenn

ACE 4710 - Inline Health Monitoring

Hi!
Has anyone tested if you can use inband health monitoring on the ACE to detect a failed server, remove it from loadbalancing and then use an active probe to put it back in service as soon as it is online again? Will it work? Or is "resume-service seconds" the only way to automatically recover from INBAND-HM-FAILED?
KR Robert

I guess reverting back to a standard probing when a server is marked failed is the default behavior. In fact it can't work in any other way.

Health Monitoring and Restart Configuration with Node Manager

We have a WL 9.2.2 instance setup using Node Manager to control it. It contains a JMS server with a persistant store that is in an oracle database. If the Oracle database becomes unavailable, the Weblogic server throws a number of errors eventually leaving the Managed Server in a "FAILED" state. I configuring/activated the following "Configuration - Health Monitoring" options for the managed server to have it automatically recover from this situation:
Health Check Interval: 180
Auto Kill If Failed: Checked
Auto Restart: Checked
Max Restarts Within Interval: 2
Restart Delay Seconds: 0
However it is not automatically restarting, even though the server shows in a "FAILED" state.
1st question: Do I need to restart the server with the settings above to have it react to the FAILED state? I would think that 3 minutes after I configured the above it would begin a restart on the FAILED server, but that does not happen
I also note on the "Configuration - OverLoad" page, there is a setting for "Failure Action:" that can be set to "Ignore, take no action" or "Force Immediate Shutdown of this server" I did configure/activate this for "Force immediate Shutdown..." but again the currently FAILED server does not restart.
2nd question: Does this "Configuration - Overload- Failure Action" setting override or effect in any way the configuration of restart on the "Configuration - Health Monitoring" page?
3rd question: Same as 1st question but for these Overload settings: Do they require a full restart of the managed server to somehow take effect?


Have you set the field : CrashRecoveryEnabled=true in file : ..\bea\weblogic92\common\nodemanager\nodemanager.properties ?

Satellite P855-108 - PC health Monitor fails to update - Windows 8.1 update

Similar Messages

Maybe you are looking for