Satellite P875-S7102 going to sleep after one minute

This problem appeared out of nowhere a few months ago, and after going through a ton of settings (all of which did NOT have sleep set to come on after one minute of inactivity), I finally managed to fix it.
It's been about a month now, and suddenly the problem presented itself again. My laptop is plugged in, about 50% of the battery is charged, but every time I leave it unattended for one minute it instantly goes into sleep mode. My settings are for it to go to sleep when unplugged after 1 hour, and 4 hours when plugged in.
What on earth is going on, and why does this keep happening? Does anyone know how to fix this?

Hi! You might want to check your settings here
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture48.JPG ‏137 KB

Similar Messages

Satellite P10 automatically goes into Standby after 15 minutes

My Satellite P10 automatically goes into Standby after 15 minutes. This is a setting that is controlled by the Toshiba Power Management settings, or the Toshiba Console.
When I change the settings there the system still goes into Standby after 15 minutes. When I go to Control Panel/Performance and Maintenance/Power Options, it tells me to go to the Toshiba Power Management to change the settings, but I can still see the settings in grey stating 15 minutes standby time.
But in the Toshiba Power Management I can't seem to be able to ajust Standby settings so that they actually work. There must be a trick to it..
Can anyone help me figure it out?
Thanks a lot,
Lerak

Thank you for your replies. As I now understand it there are 3 power management utilities fighting for control of the power management settings:
1) The windows OS power options("Power Option Properties, from the control panel/performance and maintenance/power options);
this utility is overridden by:
2) Toshiba Power management;
and
3) the "power save modes", activated by pressing the Function key and the F2 key, which in turn can override the Toshiba Power management.
If this last Function/F2 combination is used to change the power save modes, the windows OS power settings (which are shown in grey and cannot be changed because this is overridden by the Toshiba Power management) DO actually change.
Hold down the Function key (Fn) and press F2, holding down the Fn key. Each time you then press the F2 key again you scroll down the different "Power Schemes". The last mode is called: Toshiba Power Management. One would think that by choosing this setting the Toshiba Power management utility would effectively take over control of the power settings. Unfortunately this does not seem to be the case..
At least using this last option provides a workaround. Some of the "Power Schemes" disable the standby options.

HP pavilion/dm4 goes to sleep after 1 minute--it's a drag!

I've checked my control panel settings and then the advanced settings (for notification icons--which doesn't apply to this problem).
What ever I set, I'm working at my computer and screen always goes to sleep 1 minute after if I don't touch the keyboard.
What am I not getting. I need at least 5 minutes or so before it should go to sleep. My computer at the office only goes to sleep after I make it.
Thanks.
Doug
This question was solved.
View Solution.

THANK YOU! I'M GLAD IT WAS SOMETHING SIMPLE.

HT1776 I have the Energy Saver setting set to NEVER on both options, and my computer STILL goes to SLEEP after 1 hour. Please help!

I have the Energy Saver setting set to NEVER on both, and my computer STILL goes to SLEEP after 1 hour. Please help!
My COMPUTER goes to sleep and disrupts my apple tv all the time. How can I fix this?

That you are getting the BONG is a good sign, it's unlikely to be hardware if you are able to hear that.
Start by running SW update. It's not that there is a specific fix, but when updating it may rewrite some system files which may get this going again purely as a side affect. Worth a go, and should not harm the system.
Try reset the PRAM - Resetting your Mac's PRAM and NVRAM
Hopefully one of these quick fixes works, otherwise we'll need to try isolate the issue next - so if still having a problem, I'd try create a new user and login as that user to see if the issue persists (which will tell us if it's system wide or user specific)

Hi when I stream video content to my Tv using Apple from my Ipad3 I find the Ipad goes to sleep after 2/3 minutes and disconects, the only way I have found to stop this is to continually tap the Ipad screen but there has to be a simpler method/ any help

Hi when I stream video content to my Tv using Apple tv from my Ipad3 I find the Ipad goes to sleep after 2/3 minutes and disconects, the only way I have found to stop this is to continually tap the Ipad screen but there has to be a simpler method/ any help would be most welcome.

Welcome to the Apple Community.
Contact the developer of the Air Video app.

My computer keeps going to user account after one minute of idlig. How can I change that?

my computer keeps going back to user account after one minute of idling. The only thing I know I did was to change the time on window themes. Now how do I get the user account page from taking me from my page I am currently reading? Does this after every 60 sec. of no activity.

Hello again loveroflight,
I am still not understanding apparently what your issue is. So I think it would be best if you contact HP Technical Support for repair options. They will be able to log onto your system and actually see what it is you are having and issue with and provide you with a resolution.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I have a Ipad 2 w/ iOS 7 it goes to sleep after about 2-3 minutes.Why?

I have a Ipad 2 w/ iOS 7 it goes to sleep after about 2-3 minutes.Why?

If it's been inactive and you have it set in settings to shut down after a certain period of time, it will.
Try going into settings and changing this to your preference. If this is not the issue, adjust the settings anyways, then put back how you prefer. Sometimes turning a setting off, then back on can help
Aside from this you can do a restart. Press and hold the home and sleep button at same time until the apple logo appears. Or in settings > Reset> Reset all.

Rented movie but it kept freezing after one minute of play -help please

Rented a movie on Apple TV but it kept freezing after one minute of play - help please

Try waiting a few minutes, or longer, to see if the beachball goes away. Start up iTunes, then go do something else for awhile. Perhaps iTunes is going some overdue bookkeeping and once you let it do it it will work again.

Screen saver puts monitor to sleep after 5 minutes regardless of settings

Within System Preferences, I have set the Energy Saver to put my display to sleep after 15 minutes of disuse—yet it goes to sleep after 5. I have tried changing the display settings to 30 minutes, 1 hour, Never, etc., and nothing works; it always goes to sleep after 5, even when I have unchecked the selection for putting the hard disc(s) to sleep when possible. Does anyone know what would be causing this or another setting I am somehow overlooking?

try resetting PRAM
http://docs.info.apple.com/article.html?artnum=2238
and SMC
http://docs.info.apple.com/article.html?artnum=303319

Just upgraded to latest iOS and my iPad does not come back up. It displays a line to an iTunes logo and then goes off and after some minutes comes back on. I cannot reset it or anything else.

Just upgraded to latest iOS and my iPad does not come back up - the following appeared as the first thing after turning back on. It displays a line from the power/USB connector to an iTunes logo and then goes off and after some minutes comes back on. I cannot reset it or anything else. It is completely non-functional.

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
 Cheers, Tom

Very slow first Mobile Service call after one minute incativity

My mobile service api (basic tire) response about 30 sec delay for the first call. The subsequent calls are fine but the first call even sometimes times out. Which is totally unacceptable. The worse is that after one minutes inactivity it stars again.
It uses SQL Server (Standard tire) which is the culprit I guess. Because if I do a manual db query before
the time lag of the api call disappear. I set up automated api calls requesting db quires in about every minutes but did not helped. Looks like they are screened.
What should I do until I have enough customers to get an api call every minutes?
It's a quite important issue because due to the bad user experience the app will never have enough customers.

I have done a lot of testing to gain more accurate data about the case. It's quite time consuming because I have to wait some minutes after each testing. I focused this time only one of my stored procedure and measured it from the app, from browser and from
VS SQL Server and turned out I was wrong there is a similar significant time lag from all method and if I wait enough about half an hour in all method the stored procedure call will time out. Thus, the underlying issue is probably in SQL Server.
The VS SQL Server provides the following error massage:
Msg 4083, Level 16, State 1, Procedure likingProbability, Line 51
The connection was recovered and rowcount in the first query is not available. Please execute another query to get a valid rowcount.
The actual rowcount in the code:
SELECT @howGood = howGood FROM goodforme.Scans WHERE itemId = @itemId AND userId = @userId
IF (@@ROWCOUNT > 0 AND (@howGood = @MAX_RATE OR @howGood = @MIN_RATE))
BEGIN
SET @howGoodPrediction = @howGood
RETURN
END
For me it looks like the rowcount should be valid.
In the second call the response is valid but with huge delay like 20 sec, but in the subsequent calls it's linearly reduced to about 1 sec. And if the next call happens about 30 sec later the response will have increase again to about 10 sec time lag and so
on. Thank you for helping to solve the issue.

My phone screen goes blank and after a minute or so goes back to home screen. why?

hello. my phone screen goes blank and after a minute or so goes back to home screen. why? any help please?

Howdy mbaeguasu,
It sounds like your iPhone may be restarting unexpectedly while you’re using it. Take a look at the article linked below and, if you haven't already, try installing the latest version of iOS on your device.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
So long,
-Jason

Windows 8.1 automatically logs me out after one minute

I downloaded and installed Windows 8.1 Pro a few days ago from TechNet. I'm logged in only with my Microsoft account (not a Domain account).
For some reason, it logs me out automatically after one minute and takes me back to the login screen where I have to click and enter my password in. I checked all of the Power settings and the Screen Saver is off.
Also, I've wanted to disable the login screen entirely since I live alone. I've seen many articles about being able to disable it by unchecking the box in the netplwiz app, but the option doesn't even exist.
Thanks in advance!

Hi,
May be you can try to boot into safe mode for test, or create a new account.
In addition, netplwiz is a command to open Manage User Accounts. I doubt whether you had use it correctly.
Press WIN+R, then type netplwiz , press
Enter.
Roger Lu
TechNet Community Support
I booted into Safe Mode (after figuring out the new method) and it logged me out after one minute. I logged back in, created a new user, rebooted in normal mode, logged in as new user, was logged out after one minute. Double-checked Advanced
Power settings again -- nothing indicating this should be happening.

HP 15-f009wm shuts down after one minute

HP 15-f009wm, shuts down after one minute at idle. If you are doing something on it, like moving the mouse, it will stay on. I tried to go in, and change the power plans, and the options pertaining to this, but no help at all. I even tried to take the password off, so my wife wouldn't have a hard time trying to put it in, everytime it shuts down. I seen the option, marked it, and it still needs the password to open it.

If you have a virus and malware infestation, they you will have to certainly address that. This might be a good starting point to attempt to clean your system: Resolving and Preventing Viruses on Your Computer (Windows 8)
This is one way you can prevent or at least reduce potential infection in the future:
Using Windows 8 Defender to Prevent Virus and Spyware Problems
Some virus and malware are very tough to remove. This may be the quickest way to clean your system and start over. If you do this, you may want to take the time to clean any external drives you may have (ie. USB Sticks) as to not potentially infect your system again: Performing an HP System Recovery (Windows 8)
I hope this helps.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

My nano shuts down after one minute of use, why? Brandnew

My nano shuts down after one minute of use and it doesn't matter if I'm using the radio or playlist. This is brand new so I've only ever listened to 1 minute of a song. Help

Kevin,
This usually happens when your headphones/earbuds aren't plugged all the way in. Double check the connection of the headphones and make sure the jack is free of debris.
B-rock

Satellite P875-S7102 going to sleep after one minute

Similar Messages

Maybe you are looking for