Satellite Pro 2100 Wont boot up

Have used this laptop for many years without any problems that is until today. the laptop refuses to boot up.
DC in 15V Ok.
Power light green On.
Battery light green On.
Built-in HDD Off.
When I pressed the start button, thought I heard two short beeps.
Can anyone please help?
Kimberlin

Hi
Did you see something on the display?? Maybe an error message which says that no boot source was found or something likes that???
Several times ago my notebook was not able to boot up. I have simply disconnected the AC adaptor, I have removed the battery and I have waited about 20 min.
Then I have connected everything again and the notebook has booted up
I dont know if it will help you but you know trying is for free ;)
So, check it

Similar Messages

Satellite Pro L40 wont boot after changing BIOS settings

Alright changed a few settings in the bios last night and now when I boot I get a black screen lights flash and that hard drive light comes on but nothing on screen.
There was no password on bios,... how would I reset BIOS to normal?
I put a windows disk on I can hear the disk spinning but nothing on the screen
(I think I have come to the right place on the forum)
Its a Toshiba Satellite Pro L40 model psl4be.
Thanks

>There was no password on bios,... how would I reset BIOS to normal?
You can set the BIOS to default ONLY inside the BIOS so you have to access the BIOS pressing F2 or at the beginning of the booting order
But I doubt that this problem is related to the BIOS.
Maybe its just a simple bad luck that this issue happened just exactly after changing something in BIOS.
Try to connect an external monitor and check if you can see something on 2nd display.

Satellite Pro L300 wont boot up after updating BIOS from 1.30 to 1.50

Dear All,
I own a Toshiba Satelklite Pro L300 and had no problems for the past 4 years. Last Monday I replaced my Hard Drive with a new one and after installing a fresh copy of Windows XP Pro, I downloaded all the drivers from the offical website. Upon finishing my last update, I updated the BIOS from version 1.30 to 1.50. After a few seconds my laptop restarted and was unable to load Windows and/ or recognise my new Hard Disk.
I tried several methods, being Safe Mode, Bios Optimun Defaults etc but was unsuccesful. IO could not even re-install Windows as the Hard Drive is not being recognised by the Laptop. I formatted the HD again via my desktop Pc but still have the same problem.
I am really worried and would appreciate immediate help!
Best Regards,
Engelbert

> I formatted the HD again via my desktop Pc but still have the same problem.
What happen exactly when you switch your notebook on?
Set BIOS to deult settings and try to install original recovery image that you got with your notebook. If everything works OK that means HDD upgrade was successful and there is no some serious hardware problem.
After this check you can try to install WXP again.
Please post some feedback.

Satellite Pro A10 wont boot up

I really hope someone can help, my laptop just suddenly shut down. Since it has shut down i cant load the Laptop in any mode including safe mode. It gets to as far as the windows xp screen with the bar running along the bottom, but that is it.
in safe mode it will just load the drivers and then just do nothing
any help would be appreciated as its not even my laptop

Ive just tried the recovery disk and they dont seem to work
get the following message
GDISK (E) SECTOR 0 OF FIXED DISK 1 FAILED VERIFICATION - INT13
ERROR:CONTROLLER FAILURE (0X20)
GDISK (E) CANNOT WRITE TO SECTOR 0 OF FIXED DISK 1 - INT13
ERROR:CONTROLLER FAILURE (0X20)
GDISK (E) CANNOT REINITIALISE MASTER BOOT RECORD - INT 13
ERROR:CONTROLLER FAILURE (0X20)
TDSIKSZE V1.0 GET HDD SIZE
HDD SIZE = 30GB
GDISK (E) NO SUCH FIXED DISK - 1
Then it flicks to a blue screen like it is going to start an installation the a message comes up saying
!!!!!!!!!!!! ERROR !!!!!!!!!!!!!!!!!
EXTRACTION FAILED
Has anyone got any ideas :S i tried the simple option during recovery.
anyone help please

Satellite Pro 2100: Booting from a CD-R not working

Hi,
At our company we use the BartPE boot disc to get onto the company network from which we can then use Norton Ghost to image our PCs and laptops. This works really well. However, I've got a Toshiba Satellite Pro 2100 which is refusing to read any boot CDs. It'll TRY to read the discs but simply fails.
I can hear it trying over and over again but it's just not working. I've tried writing using different media and different CD writers, even going down to writing at 8x speed, but nothing helps. Is there a known issue with reading CD-Rs on this range or model?
Tim.

Hi
To boot from the CD you can press the C button immediately after notebook starting.
Furthermore it would be very interesting to know if it's also not possible to boot from the Toshiba recovery CD.

Satellite C50-A634 wont boot from USB or DVD

My new toshiba Satellite C50-A634 wont boot from usb, or dvd ,
i have downloaded win 8.1 and burn image to dvd but i still get an error message "no bootable device......please restart system" .
Can some one plz help?

Hi
Does Satellite C50-A634 supports internal CD/DVD drive or did you try to boot from external optical disk drive?
You have to know that _Satellite C50 & Satellite C50D models *without* a built-in ODD_ are not able to boot from an external ODD due to a technical limitation.
Details here:
[Limitation of external boot media for Satellite, Satellite Pro C50 & C50D devices|http://aps2.toshiba-tro.de/kb0/TSB3B03JA0000R01.htm]
Only USB flash drives are supported as external boot devices!
It is necessary you can use a USB flash drive as recovery media on notebooks without a built-in ODD.

Need to find the cmos battery on Satellite Pro 2100

I have a laptop that isn't keeping date/time settings and I need to identify the laptop to find the correct instructions for taking it apart.
The make is a Satellite Pro SP2100, model number PS210E006P9-EN however I'm unable to find this make/model on the Toshiba website. The nearest I can find is Satellite 2400-103, Part Number : PS240-014T1 which looks identical.
I've tried using the Toshiba identification tool to detect what the laptop is but that fails to provide any results.
I also need to find what the power supply is for this unit as the current one is faulty and has wires exposed.
The current adapter with it is PA3201U-1ACA, the problem is this adapter has got another adapter on the end to fit in the power socket in the back of the laptop. The connector at the end of PA3201U is too thin to fit.

Hi
This notebook is very old and the name of this machine is: Satellite Pro 2100 PS210E
> I have a laptop that isn't keeping date/time settings and I need to identify the laptop to find the correct instructions for taking it apart.
Usually the CMOS battery can be charged. You have to connect the AC adaptor and the notebook should be powered up for about 12-14 hours.

Help in identifying Satellite Pro 2100 for driver download

I have a Satellite Pro (marked underneath as a PS210E-00C3G-EN and as a P4 2000/256/30G/15XT/DCW/LW). I believe it's a Sat Pro 2100, whatever that is.
Problem I have is that when it comes to downloading drivers, I can't find anything approaching that model from the selection process. I have searched the forums and there isn't much about on this machine other than in this one, so I was hoping someone could help me in identifying this machine specifically for driver downloads....yes, guess who reinstalled Windows XP without checking I had all the Toshiba specific stuff tucked away first?
RIght now I have a load of things running without drivers and it's not at all optimal....
Thanks in advance
J

Check this Toshiba European driver page;
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU#
and choose;
*Archive Satellite Pro Archive Satellite Pro 21xx Satellite Pro 2100*
Then you will find all available Toshiba drivers for this machine ;)
Bye

HT1948 USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

OS X installers have always been fairly specific, hardware-wise. I haven't read anything reflecting that situation with the Recovery HD, so it may be that the Recovery HD created for the MacBook Pro does not have the necessary drivers for the Mac Pro. Obviously, nothing definitive here, but a possibility.

Satellite Pro 2100: Quick fix don't work with Win XP SP2

the quickfix drivers for win xp on my toshiba satellite pro 2100 doesnt work saying the drivers needs xp without service pack2.
Are there any drivers for winxp service pack 2?

Hi
The quickfixes (QFE's) are small Microsoft applications which close some security openings in the Microsoft products.
You can install such updates either automatically if the windows will search for updates or you can do it manually from the Microsoft site.
I think you have tried to install not QFE's but drivers which are not compatible with SP2.
Please take a look into the Microsoft Windows XP SP2 Update information which is available on the Tosh page and follow the guide lines

Satellite Pro 2100 and new hard drive

Hi,
I've seen on another post that L0nestar has installed a Western Digital WD2500BEVE (250GB, 5400RPM) into a Pro 2100.
The question I have is what interface is required EIDE or SATA? The original drive states its a SATA interface, but the WD2500BEVE is an EIDE interface?
Hope someone can clear this up for me.
Cheers.

As far as I know all old notebook models have HDDs with EIDE interface. Satellite Pro 2100 is delivered with Enhanced IDE (ATA-5) HDD.
Bye

Satellite Pro 2100; How to recover additional software without recovery CD?

How can I recover the bundled WinDVD and Drag'n Drop CD software for my Satellite Pro 2100 without the recovery disk?
Message was edited by: yirms

This is not possible because this additional software is not available on the Toshiba download page why?
Because this is not a Toshiba software but software from 3rd party manufacturers.
This software is bundled with Recovery disk and can be used only with your notebook!
I think this has something to do with the licence issues

Satellite Pro A120 cannot boot up when printer is connected

Hi I have a brand new Toshiba Satellite Pro A120 but am having a very strange problem.
I installed my printer - Epson Stylus Photo R300 but now the laptop wont boot up if the printer is turned on. When I turn it on the Toshiba screen comes up ok, then the Windows XP screen comes up with the black background when the blue bar goes across to load Windows but its all faded out and the laptop just freezes and will not power up!
However if you turn the printer off and re-start the laptop it boots up fine!
Its definitely the printer that is causing this as its only when I have it turned on.
It never caused this problem with my old PC that was using Windows XP too.
Any help with a resolution would be greatly appreicated.
Thanks
Adam.

Hello Adam
I am afraid there is not much to do. Friend of mine has the same problem and the fact is that Epson chipset is pretty bad and it gives completely wrong information to the system. Because of that notebook is confused and can not start.
I can just recommend you to use USB hub and I hope it will work. I dont know if your notebook can boot from USB device but if this option is available please disable it.
Good luck!

Satellite Pro L10 - Unmountable Boot Volume

My Satellite Pro L10 loops at the boot process. After the Windows XP splash screen, the following error messages comes up: .... Unmountable boot volume... Technical Information: Stop: 0x000000ED...
I know this is nothing exceptional and doing a full recovery would solve the problem. But I don't want to loose the data (which of course is not backed up). I tried a Windows XP disc, but it won't boot from the cd/dvd drive pressing F12 or <0> and changing the boot order....
Can anyone help please?

Hi
Hmm the error message unmountable boot volume appears mostly if the HDD cannot be recognized during the booting. Why? Well, possibly the HDD malfunctions or the master boot record is faulty!
If you dont want to recover the notebook you could try to boot from the XP CD (press C button immediately after notebook powering) and to start the repair console.
In the repair console you could use the command chkdsk /p and after this you could fix the master boot record using the command fixboot or/and fixmbr.
If it does not help, the new OS installation is you last resort.
Ps: if you want to backup the data you can try to remove the HDD and try to connect it via external USB HDD controller to another computer.

Satellite Pro C850 wont work after Bios update

my satellite pro c850 cd wont work after bios update from toshiba.
what do i do?

Saying: dont work you mean it does not power up or what do you mean exactly?
Did you flash the BIOS properly?
Possibly something went wrong during the update and this means that ROM module isnt flashed properly
In most cases a special BIOS crisis disk would be needed to get it working
Not quite sure if you can get it fixed by your own
Check this thread. Maybe it helps:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
Otherwise you need help from authorized service provider available in your country.

Satellite Pro 2100 Wont boot up

Similar Messages

Maybe you are looking for