Satellite Pro 4600 Wireless card does not work with WIN2K ?

I have a Satellite Pro 4600 with UK dealer installed PA3070U-1MPC wireless card running with Windows 2000
The wireless client manager finds the network of my wireless router and reports the signal is excellent and I see all green bars swhowing.
However I can't mske a connection, in 'connections' the wireless one says 'network cable is disconnected'
the router works ok with other laptops in my house.
I have latest version of Win2K also have downloaded and installed latest versions of client manager and WLAN card driver for win2k from toshiba website.
The 'toshiba support in Turkey' told me 'I need a different driver for Win2K for my wireless card cause the win2K driver on the toshiba website is not for 'this' wireless card'. I have waited for this for 3 weeks now and have been unable to reach the elusive UK Level 3 support who supposedly have this driver. I have seen on the internet the same wireless card is has been sold as a 'made by toshiba' accessory and it says it is compatible with Wim2K
What do I do next please ? Does this run at all with Win2K , is there 'another driver' and so on ?
Thanks

hello
please be more scpecific - what do you mean by 'disconnect the LAN' - I have nothing conneced there anyway ? do you mean 'disable' the LAN even though there is nothing plugged in ? can you please post the exact sequence of this so I can try ir too.
In the meantime my laptop has been to Toshiba for them to sort out at their highest level UK support base. I was hoping my troubles would be over - but no, read below what happened. They are basically saying my win2k is not in order but I had just installed and updated it so right now I haven't a clue what to do next.
START QUOTE of Toshiba Support response:
Sat Pro 4600
Serial No: 31474181G
Windows 2000 SP4 (customers build not recovery CD)
BIOS V1.80 not current therefore updated to V2.60
The notebooks wireless card is functional and has the correct driver installed, it also has the correct and latest version of the Wireless Client Manager. The wireless function appears to see the router but will not connect and obtain an IP address. Irrespective of the settings applied within Internet Explorer or the Wireless client manager you cannot obtain a connection. The customer did not have any Toshiba utilities installed such as, Power Saver, Common Modules, Chipset drivers, network device switch, I therefore installed these missing components and updated the BIOS to the most current revision. However despite this the unit will still not connect to the wireless.
I therefore removed the customers HDD and replaced his HDD with a Toshiba loan HDD with a fresh build that I had created. When using the machine with this build the wireless connected without issue and I was able to browse the internet etc. I placed the customers HDD into our machine and the problem with the wireless was replicated on our machine here, therefore the problem is not with the wireless card or any hardware aspect of the machine, the problem lies with the customer's build of Win 2000. I examined for anything obvious but could not find anything, therefore I'm sending this machine back to customer with the advice that his build needs addressing or he needs to reload Win 2000 his machine.
As you can see from the above comments, the machine performs as per specification with loan HDD and fresh build of Win 2000 installed, the problem is only present with you HDD and build in the machine. In addition to this I have replaced the missing screws on the base of the machine ensuring the machine is structure is maintained.
5 x B16 Screws
1 x B6 Screw
1 x Memory Cover Screw
END QUOTE

Similar Messages

Satellite Pro A200 - Fn keys does not work with Windows Vista

Hello,
I own a Satellite Pro A200-PSAE7E and a retail license for Windows Vista Ultimate 32bit (with SP1) installed on it.
Before installing Vista, I upgraded the BIOS to the most recent version available on the Toshiba site ([http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT]).
BIOS version is now 2.20-WIN32 contained in this file: [http://support.toshiba-tro.de/tedd-files2/0/bios-20080404121735.zip]
After the successful installation of the operating system, I installed the "Value Added Package" ([http://support1.toshiba-tro.de/tedd-files2/0/vap-20080109135106.zip]) which contains the "Flash Cards Utility". In my understanding, the installation of the "Value Added Package" should enable the Fn keys usage.
This doesn't seem to be true or not completely true.
Here is what happens.
- Before the installation of the "Value Added Package" all the Fn keys didn't work.
- After the installation of the "Value Added Package", if the TCrdMain.exe process is running, all the Fn keys don't work.
- If I remove the TCrdMain.exe from the startup and I reboot the PC, only some Fn keys work (Fn+ESC, Fn+F1).
There is no way (or I didn't find a way) to make all the Fn keys working.
Does anybody know how to solve this problem?
Thanx in advance,
mme000

I do not know for sure but it can be because of SP1. I have installed Vista Ultimate on A200 and all listed stuff (drivers, tools and utilities) from Toshiba support page.
Does your installations Vista DVD contains SP1 or you have installed it on your own? If you install Vista Ultimate (without SP1) and all stuff from Toshiba support site following Installations Instructions order.

I have wireless mouse does not work with boot camp

i have wireless mouse does not work with boot camp

Did you install the correct driver for your Windows version? Are you saying the mouse does not work in Windows after Windows is installed?

Wireless Card does not work in Windows 8.1 for G585

I just wanted to inform someone that the wireless network card does not work in Windows 8.1 Preview. I suspect the driver needs to be updated. When I go to the Device Manager it appears as a Realtek device RTL8192DE instead of a Qualcomm device that does not start. I tried installing the latest driver from the website but it makes the computer crash (BSOD) when trying to reboot after the installation which makes the Windows 8 automatic recovery turn on and I had to restore the system to a previous state before the driver installation.
For now, I just refreshed my system back to Windows 8, instead of trying to use Windows 8.1 Preview . If you have any suggestions, it would be great, otherwise I'll wait for a driver update.

neilwar wrote:
Oh goody. Just updated to 8.1 and it doesn't work. Looks like everyone else is having the same problem. Why no answer from Lenovo?
Please refer to the dedicated thread on "Blue" 8.1.
Thread locked
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

I have PCI-4452-this card does not work with XP. Are there fixs available?

I have the PCI-4452, i fould that when i installed XP on my system, the card does not work. Does this card have any drivers for ir to work on XP. Or do i have to stay on NT.

Hello,
This card is actually supported under XP for use with drivers since 6.9.2 and above (only traditional driver).
Kind Regards
Steven Bird
Applications Engineer
National Instruments

PCI wireless card does not work after restart - FM2-A55M-E33

Installed TP-LINK WN751ND wireless PCI card onto FM2-A55M-E33 motherboard. The card works fine after cold start, but does not work after restart. Windows recognises the card, but it gets code 10, cannot start.
BIOS is updated (v.11.1), as well as drivers and Windows 7 64.
I suspect that this might be the issue: Incorrect ASPM Transitions on the GPP Interface as found in ChipsetMotherboard_TechDocs/48671.pdf on AMD's official support site.
Does anyone know more about this issue?

Great! I've done that and now my card shows up. Thing is, when I try to get an IP address, it won't work. Here is the command output:
ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
And then it times out and no IP is assigned. The thing is, wpa_supplicant stays alive after this time out, and I am unable to kill it (killall -9 wpa_supplicant won't kill it). At this point if I try to reboot the machine, it will stop at 'Rebooting' and won't go anywhere. If I turn off the wireless card in its switch Linux crashes. If I try to get an ip again (by running dhcpcd) the command will hang and not return to the shell anymore.
I am unable to find any useful information in the logs.
Got any more suggestions?
Thanks! (And sorry to disturb so much)

Macbook Pro Retina - nVidia card does not work correctly

Hi,
having a MacBook Pro Retina. It ran fine till yeasterday when I fired up a game which was laggy and it was running fine before. It took me several hours to find where the problem is and it seems to me that the nVidia dicrete card is not working. But strangely not working. I installed gfxCardStatus to see whether the card is being switched to run the game and it actually is. But the performance is the same as running it on an internal Intel. I took another test and downloaded CINEBENCH to see the differences and sadly the results are the same if I switch to nVidia or to Intel and run the benchmark.
Obviously something is not right here. It happened over night. Before it worked corectly. I do not remember installing something that day/night that could have broken it (in case it is a SW problem). Only one thing comes to my mind - Apple Java update. But I tried to uninstall it and got the same result. I did try to restart several times. But otherwise there is no visible flaw, e.g. flickering or black screen when swithech do nVidia - nothing. gfxCardStatus shows that the system switches the card and I notice no change. Only in heavy load it is obvious that it is slow (slower than it was).
Is there a way to see if the nVidia card is working? I suspect that even if the system is trying to switch to a discreet card it still runs on the Intel in reality. Any way how to distinguish this rather than to rely on gfxCardStatus? Any log that would make this clear? Any test I can run (Apple HW test shows "no problem detected")?
Many thanks for hints.

To show what I am talkin about I did another test. I downloaded and ran LuxMark. There it is possible to test CPU and GPU separately on a same benchmark scene. FIrst I let the system switch to nvidia and did the test:
Then I manually switched to Intel/CPU in gfxCardStatus and also selected CPU in the LuxMark and did the same test. The result is:
You see? How it is possible that in OpenCL computation CPU with internal graphic card is even faster then the descreet one? This is what I am experiencing now and cannot figure out where the problem lies.
Would the Apple HW test discover a dead nvidia card? Because nothing shows that the card is dead but as you can see it is not performing as it should.

Macbook Pro Pinch/Zoom feature does not work with Firefox 6

Can someone please tell me how to fix this major problem?
I can not get the Pinch/Zoom feature on the track pad to work on my Macbook Pro. I am running OS 10.6.8.
I have seen this below in other posts, and have tried it, but it STILL does not work !!!!
'''''Some gestures have been removed in Firefox 4.
'''You can restore the zoom feature by changing the values of the related prefs on the about:config page.
'''browser.gesture.pinch.in -> cmd_fullZoomReduce<br>
'''browser.gesture.pinch.in.shift -> cmd_fullZoomReset<br>'''
'''browser.gesture.pinch.out -> cmd_fullZoomEnlarge<br>'''
'''browser.gesture.pinch.out.shift -> cmd_fullZoomReset<br>''''''
'''To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website.'''
'''If you see a warning then you can confirm that you want to access that page.'''''''''''
Please someone help me - this is a great feature and its really pissing me off that I can't use it.
HELP !!!

I'VE TRIED THIS:
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
I'VE TRIED ALL OF THE ABOVE NUMEROUS TIMES AND IT DOES NOT WORK ON MACBOOK PRO AND FIREFOX 6.
CAN ANYBODY HELP? THANKS ♥

Wireless keyboard does not work with Safari.

Space bar does not work when using Apple Wireless Keyboard with Safari to fill web forms.
No problem with Firefox.
Early 2008 iMac, 10.10.1, 6GB Ram

Im going to assume you are using the Apple Wireless Keyboard with your devices.
Whats probabaly happening is both of your devices are trying to connect to your keyboard at the same time and it is causing it to not function properly.
I suggest you disable bluetooth on the device you AREN'T using and try it again with the one you ARE using.
If this doesn't solve your issue, try re-pairing the keyboard with the iPad you wish to use it with. It may have just not made a strong connection.
Hope these suggestions help!

Help!! after I upgrade os vga card does not work with my ipad2...

I use ipad2 my class presentations. VGA cable was fascinating to show most of ipad screens, but after I upgraded os it does not working any more.... os bugs? Please give me advices.... I need to use it this week!
Dan

As of Firefox 4.0 and newer one needs at least OSX 10.5+ and Intel hardware.
The latest you can use on your Intel with OSX 10.4.11 is Firefox 3.6.25 (released recently) which can be found at http://www.mozilla.org/en-US/firefox/all-older.html
If you were to update to say OSX 10.5.8 then you can use Firefox 9.0.1

Wireless scanning does not work with Yosemite

When I uppgraded from Mavericks to Yosemite the wireless scanning doesn't work anymore.Tried to find some new driver at the support page, but there are only drivers for Maveriks and erlier versions of OS X.

Hi , Welcome to the HP Forums! I noticed that wireless scanning is not working after upgrading to Mac OS X 10.10, with your HP Deskjet 3520 printer. I am happy to help! Some questions for you: Is your HP Deskjet printer an all-in-one? Meaning, can it print, scan and copy?What is your printer's Product/Model Number? To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number. As their are multiple types HP Deskjet 3520 printers.Are you able to make a copy with the printer from the scanner glass? In the meantime, please see this how to scan guide, Scanning in OS X v10.10 Yosemite without HP Software, for some alternative scanning methods, and let me know if any of these options work! Thank you for posting, and hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

Satellite L30 (PLS33) - wireless card driver not working

Hello,
I have a problem with wireless card. I need a driver, but original driver (from Toshiba site) is not working.
Please, give me adress working driver.

Check this:
http://aps2.toshiba-tro.de/wlan/
By the way; All WLan drivers work!!!! But dont wonder if you use not correct driver for the Wlan card!!!
Check your WLan card and use the right one!

Satellite Pro L10: sound card does not support Windows 7

Hi
i have a Satellite Pro L10 so i installed a Windows 7 on my system but my laptop can not support Windows 7.
I need update of sound card for Windows 7.
The model of sound car is Conexant CX20468-31 AC97 Audio Sound Card.
Please help me

Hi buddy
What to say first of all you will not get official drivers for this notebook for Win 7 or Vista.
This notebook is oldie and I doubt the drivers will be released.
Reading through this forum threads Ive noticed that most of the user use the Vista driver on Win 7 OS.
Maybe you should google for the Conexant AC97 Vista driver and should try a Vista driver on Win 7
Good luck

My wireless card does not work after re installing windows 8 !!

I suppose my card manufacturer is realtek and my card driver is gemtek my network adapter driver I've downloaded and installed it my nothing happens. In my device manager there is no wireless card please help me!!!!!!
My system says no wireless card detected my PC was dos based and when I installed windows 7 everything just went fine. After some days it was formatted and again I installed windows 7 ultimate but my wifi adapter and card was not in the device manager. Please help me!!

my pc is lenovo c320 aio
intel g630, 2gb ram, dvd r/w, realtek gbe ethernet controller, usb 2.0x5 ports, keyboard and mouse

Airport card does not work with Airport Extreme when security is turned on

I have an iMac running OSX 10.4.11 with an Airport card installed (firmware version 9.52).
I recently replaced my Netgear wireless router with an Apple Extreme Base station and now I am not able to connect my iMac to the wireless network when WEP security is turned on - I get an error from the Airport Setup Assistant when I attempt to connect to the wireless network.
It works fine if the wireless security on the Extreme Base station is turned off.
Please help and thanks in advance.
Motasim

First, I highly recommend that you switch to either WPA or WPA2 as WEP is no longer considered secure. If you must use WEP, I suggest that you try the following:
o Re-create the Network Name (SSID) on your AirPort Extreme Base Station (AEBS)
o Try using 128-bit WEP, with a 26-Hex character key for the encryption type.

Satellite Pro 4600 Wireless card does not work with WIN2K ?

Similar Messages

Maybe you are looking for