Satellite Pro 6100: Fn keys not working

Hello,
Ive got a Satellite Pro 6100 notebook. Im having trouble using the secondary function keys (im not sure what they're called!). When I press the function (Fn) button, the light below the F10 button come on as it should, but when i press any of the F buttons i.e brightness up/down, nothing works!
I had a quick look at some of the keyboard help and troubleshooter in control panel which suggested the driver may be incorrect so i tried looking for an updated driver, but windows said i have the latest driver.
Does anybody else have this problem with the SP6100? Can it be fixed? If so how?!
Any help would be great.
Thanks - Kavi.
Message was edited by: kavi

Hi
Even the Windows said you use the latest drivers, you should reinstall the drivers.
Firstly remove the Hotkey Utility Emulator for Display Devices from Add & remove programs.
The reinstall the common modules and Hotkey Utility Emulator for Display Devices.
Hope it helps pleas let us known if it will work or not

Similar Messages

  • Satellite Pro A10 - some keys not working with new keyboard

    Hi all
    I hope some1 can help with this
    i have a Satellite Pro A10. The prob i have is a.b.n.and enter keys are not working and its a new keyboard
    i fitted into my other A10 and all keys work so keyboard is fine.
    All works ok with usb keyboard. Had motherboard out all seems ok.
    Any help plz
    chris....
    Message was edited by: widgy

    Hi
    Why do you think that the motherboard is ok?
    Maybe its a keyboard controller issue
    Did you check if the cable was connected properly?
    In my opinion if you are 100% sure that the keyboard is ok then the issue must be related to the motherboard because there is no other part which is placed between the keyboard and mobo.
    Bye

  • Satellite Pro A300 - FN Key not working with xp downgrade

    I have just purchased a Toshiba Satellite Pro A300 and downgraded the o/s to XP.
    There is a problem with the FN key on the keyboard, it does not function. I dont know if this has something to do with the xp downgrade?
    Any ideas please?

    If you have downgraded to Windows XP with the Microsoft disk you must install the Toshiba utilities and Hotkey Utility.
    This is necessary for the FN keys in Windows XP so check the Toshiba website for these utilities:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

  • Satellite L850 - Special function key not working properly

    Hi Everyone,
    I had Satellite L850 (pskg8a-07f001) running windows 8 64 bite for just 2 months.
    Just within this week, the special function key not working, each time I start the pc, i have to go into toshiba desktop assist then function key then click ok, it will working.
    But the touch pad has been set as enabled, also under keyboard setting has been set as special function mode. But don't know why each time start the pc have to go into function key box then click ok.
    When I bought it everything is ok, i can use the special function key to turn up and down the volume and disable wireless...etc
    Please advise. Thks a lot!

    Take a look here:
    Function key changes in Satellite and Qosmio 800 series
    http://aps2.toshiba-tro.de/kb0/TSB2903E00000R01.htm
    You can use the traditional FN + F key mode or just an F key mode.
    This can be enabled and disabled in BIOS or the HWSetup
    In BIOS go to Advanced -> System configuration -> Function key mode
    This mode can be changed
    Also be sure that Function Button option is enabled too

  • Satellite Pro A210 DVD Drive not working - error code 39

    Hi All
    My Satellite Pro A210 dvd drive is not loading.
    When I looked into it it showed an error code 39.
    I tried uninstalling it and reinstalling it but it's still not working.
    Any ideas?

    Hi
    From my knowledge the error message 39 appears if the CD/DVD drive is not visible in the My Computer.
    You can try this workaround:
    Go to device manager and delete the CD/DVD drive from the device list.
    Then go to registry (regedit) and remove the upper and lower filters from the key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    Then reboot the unit and test it again
    I think this should help!

  • Satellite Pro M30 graphics card not working when driver is installed

    Hi all,
    Im having problem with my nvidia Geforce FX Go5200, in a Satellite Pro M30 laptop, (Intel Pentium M processor 1.7 GHz, 512 Ram). This card was working fine suddenly the notebook stops.
    I have formatted the notebook and installed Win XP PRO. After installing the VGA driver I restarted the notebook but black screen started coming up right after the Win XP splash screen appears. The notebook continues to start up but no screen.
    It starts just fine in safe mode. I get my best screen by simply disabling the geforce card or uninstalling the driver. I tried to install a new driver for the VGA from the Toshiba download site but same problem appears. I have also tried updating BIOS but nothing happens.
    Anyone can help me?
    [email protected]

    It is very strange issue. It will be really interesting to know if this happen when you use delivered recovery installations CD.
    Anyway I presume there is some problem with LCD display. In safe mode the desktop is shown in lowers resolution but when OS starts the resolution will be adapted for standard one (1280x800) and obviously there is the problem.
    I am not technician but I recommend you to contact service partner. As far as I know they use special tools and programs for display tests. They can tell you more.

  • Satellite A50-112: F1 key not work for entering Bios

    my toshiba Satellite SA50-112 not entering into BIOS or CMOS setup because of F1 key is not functioning what i can do for changing the boot sequence to CDROM by alternative way.
    please help us to work better

    There are THREE ways to make your notebook boot from CD:
    1) You can adjust the BIOS setting by entering into it with the key "ESC" (not F1 as you said before)
    2) You can boot directly on CD by holding down the key "C" during starup
    3) You can make the "Select Boot device menu" appear by holding down the "F12" key.
    All above key combinations work DURING STARTUP of your notebook only. Therefor try your timing ;)
    Good luck :)
    electrochain

  • Satellite Pro M10 Fn-F5 not working after login???

    Im hoping someone can help me. Im totally confused.
    Im running a projector off of a Satellite Pro M10. The Fn-F5 works perfectly all the way up until the CTRL - ALT - DEL prompt. Even at this point I can still Fn - F5 and flip through the settings. As soon as I login the FN - F5 doesnt do anything? I have removed all the monitors, reinstalled the video card with the latest driver and installed the Device Function key utility from the website?
    I am assuming it must be something with the display settings once the user logs in but I cant work it out? I have tried taking the setting down to the basic 16bit and 800 x 600 but it makes no difference?
    Any help or pointers would helpful?
    Thanks
    Mark

    Hi
    Sorry but you posting is a little be confused.
    The FN+F5 combination allows you to switch between display devices. You can choose an external monitor, TV etc.
    If you want to use the FN keys you have to install the Driver for Toshiba Display Devices Change Utility (Display Device Change) and the Hotkey Utilities for Display Devices.
    These both applications are responsible for the correctly usage of the FN+F5 option.
    The display graphic driver has nothing to do with the FN+F5 keys.

  • Re: Satellite P305-S8820 - FN key not working after clean install of Windows 7

    I have a problem with a Satellite A210-103. After installation of Toshiba Value Added Package (Flash Cards Support Utility not available for A210), reboot, restarting Toshiba Flash Cards and pressing the FN key several times the problem still exists.
    It must have other reasons why so many user have problems with the FN keys.
    John

    I have searched for A200 and A210 in the Toshiba sections of Equium, Satego, Satellite and Satellite Pro but their are no Flash card support utility. In the details of the "Value added package" are the words:
    "TOSHIBA Flash Cards provides the Hotkey function and the launcher function that starts the Hotkey function and launches the other TOSHIBA utilities"
    So I think it's useless to search for this utility. It's more important for me to know which files (like name of the launcher program) must be started to use the FN keys.
    John

  • Keyboard Satellite 3000-214 - Ctrl-key not working

    Hi,
    I've started my old Satellite 3000-214 Notebook and suddenly my Ctrl-key did not work anymore.
    I've already tried to clean the keyboard by unmounting all keys from it and cleaning the foils, without success.
    Can anyone tell me where I can get a suitable keyboard from (I live in germany)?
    Does it has to be an original Toshiba keyboard or can it be from an other manufacturer?
    How can I remove the keyboard from the laptop? Do I have to open the case or is it possible to get it out with a screwdriver or something?
    Thx for any hint!
    Best regards.
    Ting

    Hi
    You should use the original Toshiba keyboard which is supported and compatible with this notebook.
    All parts and devices you can purchase from the Toshiba authorized service partner in your country. The full database with worldwide ASP you can find on the Toshiba European support page.
    Usually if you want to remove the keyboard you have to remove firstly the thin cover above the keyboard.
    There you will find two screws which secure the keyboard. After removing of these two screws you will be able to put out the keyboard.
    But be careful; the keyboard is connected with the flat cable to the motherboard.

  • Satellite P305-S8820 - FN key not working after clean install of Windows 7

    Hi,
    I have a Toshiba Satellite P305-S8820. I recently did a clean install of Windows 7. I have loaded the Toshiba value added driver pack and the trackpad driver but still cannot get the trackpad or the FN key to work.
    Any ideas?

    Hello John
    You are like other millions other users and what you can read is relevant for you but sometimes it works a little bit different. For you it can be useless but sometimes it helps. Fact is that this utility is offered for some notebook models.
    Generally speaking you are right and after VAP installation the job should be done but Ive faced the same problem in the past. Sometimes it works well and sometimes not. You will not believe me but in the past I used stuff for Satellite P300 to get all stuff working on Satellite A350. I cannot explain why this happen and it sounds crazy but it is the truth.
    You can also try to play a little bit with VAP installation. Try to install VAP for A300/A350/P300. Generally speaking it is the same and if this will not work well you can remove it from the system.
    Launcher for flash cards? It must be listed in MSCONFIG > startup > TcrdMain.exe

  • Keyboard on Satellite Pro A300-10Q is not working

    I have a Satellite Pro A300-10Q running XP.
    The function keys weren't working so I downloaded Common Module and Hot Key Utility.
    After that the touch pad mouse and keyboard stopped working as well.
    Please help?

    Hello
    Who knows what have you installed and what is missing so Ill send you full installation list and pleae install all drivers, tools and utilities following this installation order.
    1 Windows XP Pro(SP3) Service Pack3 RTM
    2 Sun Java 2 Runtime Environment V1.6.0_06
    3 Intel Chipset Software Installation Utility Chipset 8.7.0.1007 (02)
    4 Intel(R) Cantiga-GM / UMA Version: 6.14.10.4953
    or
    4 ATI M82XT, M86 Driver
    5 Azalia, Realtek ALC268 Audio Driver Version:5.10.0.5599
    6 Realtek 10/100 LAN Driver Version:5.686.103.2008
    7 Synaptics Touch Pad Driver Version: 10.1.8.0
    8 RICOH R5C833/R5C837 Card Reader Memory Stick 6.0.1.11
    SD/MMC 6.0.3.5
    XD Picture 6.0.1.13
    9 Intel iMSM Driver(Robson) Version: 8.0.0.1039
    10 TOSHIBA Software Modem V2.1.77(SM2177ALD04)
    11 Motorola ML3054/SM56 Modem Version:6.12.14.3
    12 Modem Region Select Utility (for Motorola) V2.2.3.0(RST223MOT03)
    13 Intel Wireless LAN Driver V12.0.0.73.0.x32_wCAT
    14 Intel Proset Utility V12.0.0.0.6.x32
    15 Atheros Wireless LAN Driver V7.6.0.200.0.x32_wCAT
    16 Realtek Wireless LAN Driver Version: 5.1116.1226.2007
    17 Atheros Client Utility V7.0.1.98.0.x32_wCAT
    18 Chicony Camera Software Version: UVC 1.7.193.0508L / 6.2.238.214
    19 Presto! BizCard 5 V5.50.02
    20 Bluetooth Stack for Windows by Toshiba V6.10.07.2T
    21 CIR Port Driver Version:7.1.64.1011
    22 TOSHIBA Common Module V1.00.08
    23 TOSHIBA Power Saver V7.04.02.I
    24 TPSInit V1.0.4.1
    25 TOSHIBA Zooming Utility V2.0.0.24c
    26 TOSHIBA Controls V3.32.4102
    27 TOSHIBA PC Diagnostic Tool V3.2.9
    28 TOSHIBA Hotkey Utility V1.00.01
    29 TOSHIBA TouchPad On Off Utility V1.00.01
    30 TOSHIBA Utilities V1.00.06
    31 TOSHIBA Assist V1.03.00upd4
    32 TOSHIBA Speech System V1.00.2515
    33 TOSHIBA ConfigFree V5.90.09
    34 ConfigFree Demo Screen Saver V1.00.07
    35 TOSHIBA SD Memory Utilities V1.8.1.3
    36 Authentec AES1610 Fingerprint Utility Version: 7.10.1.0/AP 2.1.10.0
    37 CD/DVD Drive Acoustic Silencer V1.00.008
    38 Proton Pack V3.10.15
    If something is missing on Toshiba download page just install next available software.

  • Satellite Pro U200: VGA output not working properly when AC adapter was connected

    Hi,
    I have a problem with vga output. When I'm working on battery and connect my notebook to external monitor it's ok, but when I connect AC adaptor then start waving also bluetooth and wlan does not work properly. In other case when I remove battery from notebook and connect AC adaptor it works properly.
    thanks in advance

    As long as you use a CRT you should set the refresh rate new, at least 85Hz. Standard is 60Hz as far as I know, and that hurts in your eyes.
    The wireless lan behaviour is quite normal as long as your not right next to the access point. On battery power the wireless lan card reduces its energy consumption thus the connection will be poor if you dont have a perfect signal. You can turn this off in the iNTEL Pro/SET wireless software, where you can configure the adaptor. Try to change the powersafe mode to manual and full power, this should solve your problem.

  • Toshiba Satellite C850-F12S Function Keys not working

    I recently formatted my laptop after the OS was corrupted by a virus and reinstalled windows 7 but now my Function keys that enable me to adjust brightness, volume and turn on wireless are not functioning, They only work when in BIOS setup and even when I tried to enable them to be standard F1-12 or special function keys they still dont work after starting windows. This computer has no flash cards for toshiba and i dont know which drivers to look for for this specific model. I also lost toshiba eco-utility and its player. How do i get all this back without losing my data?I have partitioned my hard disk.

    Hi Eldorado
    Thanks for your suggestion. Have done as you said but still have the problem.
    I've managed to get rid of the TouchED error dialogue by uninstalling the Touchpad on/off utility, but I can't get the function keys to work again. The problem appears to be that the Common Modules drivers are not reinstalling properly - the software (thotkey.exe) that operates these has to be within this. I have tried extracting the cab files for the Common Modules but nothing with let me into Toshiba's cab files to see if they are there so that I can copy them across manually.
    I can live without the function keys on my machine, but this is a pain - especially when I'm sure the problem has a simple solution.
    Cheers
    David

  • HP Pavilion dv7t-6100 CTO keys not working

    The key 5 on the number pad and the normal keyboard do not work and also my f9 key (volume down) button also is not working. I've system restored back all the way back to the beginning of the month becuase i found it odd that both 5's were not working, as if a virus is affecting the key board.
    This question was solved.
    View Solution.

    Hello,
    An idea for you would be to test the keyboard in a different enviroment ro see if it's hardware or not.
    We can check the keys by booting into the recovery partition and opening a command prompt.
    Power down notebook
    Press power button then tap F11 until the screen says recovery at the bottom left or says Windows is Loading files. If it shows a different menu on your screen you may have press it too late or continues to load Windows you may have an issue w/ the partition.
    Next when it loads into the menu choose an option so the program is slected. I select "System Recovery" then at the next menu press FN+SHIFT+D
    At the commpand prompt window that pops up test the keys w/ issues.
    I am an HP employee.
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

Maybe you are looking for