Satellite Pro A - Screen hinges compatible with M series?

Does anyone know if the screen hinges for a Satellite A series would be compatible with the M series?
Cheers

Hi buddy
I think nobody here is able to answer your question because its only a user to user forum and you will not find an authorized service provider here or notebook technician Sorry!
But let me give you a word of advice: Contact the authorized service provider in your country. If you call them it takes only few minutes and I think they can answer your question.
Good luck!

Similar Messages

Satellite Pro 6100 screen compatibility

Hello!
Is there a place i can check screen compatibility for my Toshiba SP 6100?
I have damaged a screen on one of my laptop and would like to replace it.
Thanks

Hi
The problem is that Satellite Pro 6100 was delivered with four different displays.
14.1' (1024x768) TFT colour display,
15.1' (1024x768) TFT colour display,
15.1' (1400x1050) TFT colour display,
15.1' (1600x1200) TFT colour display
I have found a information that a P000334230 (LTN150X4-L01) screen is compatible with your unit.
http://www.getpartsonline.com/p000334230.html
But I recommend asking the Toshiba service partner in you country for compatible screens.

Print Studio Pro plugin is not compatible with Photoshop Elements 12 Editor for Mac

It appears that the latest version of Print Studio Pro PlugIn is not compatible with the Editor version of Photoshop Elements 12 for Mac as available on the App store. The install gives an error saying that it did not find a supported version of Photoshop Elements. This error has been reported before for Elements version 12 but was reportedly fixed in the latest version of Print Studio Pro. Now it appears that this version may support Elements 12 for Mac but not the Editor only version from the app store. Any suggestions for work-around on this?

"Any suggestions for work-around on this?"
No!
Not untill Mac and Adobe and Canon get their collective acts together. Mac (Apple) has the bad habit of upgrading their stuff and not being forthcoming with the particulars given to 3rd party companies like Canon and Adobe.
Besides the cost difference of Mac's the compatibility issues are it's worst features.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

Acrobat Pro 9 is not compatible with Windows 7

Acrobat Pro 9 is not compatible with Windows 7. How do I upgrade my version?
Thanks,
John

Where did you get that information (other than Win 7 is not listed in the compatibility list)? I have been using AA9 on Windows 7 for several years (it is a 32-bit system). Did you try to install it or some other issue crop up? You may need to be sure you install the updates, but otherwise it should work. Even folks with AA8 have been successful on Win 7 (at least that is what they have reported), though they are likely to have some minor problems at times.
My Win7 came with Acrobat 9 when Win 7 first came out and has worked fine. If you have upgraded OFFICE to 2010 or later, then you would only be able to print, not use PDF Maker.
That being said, it is still a good idea to go ahead and upgrade. AA9 is the oldest version qualifying for the upgrade to AAXI.

Is my mac book Pro 3,1 model compatible with mountain Lion? it was build in 2007 week 28

Is my mac book Pro 3,1 model compatible with mountain Lion? it was build in 2007 week 28.? Its got the nividia GeForce 8600 w 256 mb graphic card and 4 gig of ram

ML specifications say Mid 2007
How to identify Macbook Pro models

Griffin's Pro Speaker Breakout Cable compatible with the iMac G5?? HELP!

I would love any suggestions anyone has as to making Griffin's Pro Speaker Breakout Cable compatible with the iMac G5.
I just made the very foolish mistake of purchasing Griffin's Pro Speaker Breakout Cable for my iMac G5, which I am sure others, more up to speed on their apple products, realize are not compatible. The Pro Speaker Breakout Cable, as its name would suggest, connects to the Apple Pro Speakers Minijack available in G4s and G3s.
I need someway to connect this Apple Pro Mini plug (2.5mm plug) to my audio-out 3.5mm output jack on my iMac. I have found this connector http://www.mpja.com/productview.asp?product=11298+AD but I am not sure if the 2.5mm Apple jack is the same as other 2.5mm jacks. Does anyone know if the two are compatible???
I guess the other option is the iFire - or, conversely, to just forget the whole thing and get some new speakers.
Any suggestions on the best/ most cost effective option would be greatly appreciated!!!
Thanks in advance,
Chris

Forgive me for not being specific enough. I do not want to connect apple pro speakers. I want to connect my household speakers via the Pro Speaker Breakout Cable http://www.griffintechnology.com/archive/audio/prospeaker.html to my iMac. However, I did not realize that the breakout cable connected to the obsolete Apple Pro Speaker Minijack 2.5mm.
Basically, I am just looking for the most cost effective method to get suitable sound from my computer. The threee options I am considering are:
a) 2.5mm jack to 3.5mm plug converter allowing my breakout cable to fit into my audio input (which I am not sure will work - as I am not sure if the Apple minijack is a standard 2.5mm)
b) get the iFire, plug my breakout cable into the iFire and then to my computer.
c) get a different sound system entirely.
I am really looking for any advice as to which would be best.

Satellite Click 2 Pro P30W is not compatible with monitor LG 29EA73 Ul

My LG monitor works perfect with all my other devices, but it can't detect signal when I connect Toshiba whith HDMI cable.
I have tried all types of resolution that Windows 8.1 permit.

Hi,
thanks for your interest.
My LG monitor say allways "No Signal Please check your connection".
I have tried with all resolutions and sizes of screen that my Satellite has. I have tried with two different hdmi cables, and with the three hdmi inputs that my monitor has.
Satellite recognizes my monitor and "thinks" that all are OK, but my LG can not detect signal from my Satellite.
Maybe the problem is with my LG, but I have another notebooks that can display with my LG.

Satellite Pro L20 - broken hinge baseplate - where to get the parts?

Hi there ,
First post on here so please excuse any lack of local etiquette.
My son has a Toshiba Satellite Pro L20 with a broken Hinge baseplate. I'm am calling it a baseplate as i cannot find the name of the part anywhere on the web so far.
Its obviously the metal plate on the base that the hinge attaches to.
You can even see it if you remove the battery.
Does anyone know what this part is called and where i could possibly purchase one ?
Kind regards
Jimmy

Hi
I think in such case the Toshiba ASP (authorized service partner) could help you.
You have to get in contact with this ASP in your country and the technician should be able to order a compatible part for the notebook.
Here you can find all ASPs worldwide:
http://eu.computers.toshiba-europe.com -> Support & Downloads -> Find an Authorized Service Provider

Satellite Pro L100 crashes when loaded with 2 x 1GB Ram

Hi,
Satellite Pro L100 - came with 512MB ram - Too slow - expanded using 2 x 1GB ram from crucial technology, speed 555MHz
When both 1GB installed, laptop crashes on the XP boot screen - then loops, crashes, loops, crashes etc...
Tried alternating the slots and using ram independantly - No change - so ruled out faulty ram
Tried shippped memory with 1 x expanded 1GB ram - All OK.
Tried every orientation conceivable - just crashes when expanded ram is loaded to its specificed max - 2GB.
Upgraded BIOS to 3.2 - no change
Does anyone here have any other suggestions? I fear my last resort is to dig deep and get more ram from a diff OEM, prefer not to hence asking politely for help
Thanks in advance,

Have you ran Memtest?
Download the bootable Memtest CD ISO from www.memtest.org and run it for a few passes.

Re: Satellite Pro A200 - Screen goes black after BIOS screen

Hi,
I'm new to the forum and have quite a big problem. So any help is welcome and appreciated.
My Satellite Pro A200 goes black after the BIOS screen and a black screen with a blinking cursor. Also just before the screen goes black a bleep can be heard which shows windows is booting.
I can access the toshiba set-up screen but not the safety mode set-up.
Kind Regards

Hello
You wrote that you can access the BIOS but have you checked if the HDD is recognized properly? Maybe the computer cannot boot because HDD isnt recognized so you should check this.
If the HDD is recognized I would try a recovery installation from Toshiba recovery disk. It seems that Windows isnt able to start and if you reinstall the whole system it should help to get rid of this. Just go in boot menu and select CD/DVD drive as boot device.
Check this!!!

Satellite Pro 480CDT will not boot with HDD fitted?

Hi
I have tried several hard drives in my Satellite Pro 480CDT but none of them will boot. The screen stays black and the power led flashes orange (long, short, short, short, short, long, short, short). If I take the drive out the machine goes to the 'In Touch With Tomorrow, TOSHIBA' screen. It will see Windows CDROM or a floppy. I have tried with 6 HDDs all below 6Gb and as far as I know working. I have tried with another 480CDT a 220CS and a 2140CDS. Surely all HDDs and laptops have the same fault? Do I need to update BIOS or something as none of the drives are original to the machines.
Please help!
Thanks
John.

Hi John
I am afraid there is nothing you can do alone. When power supply electronic detects some power problem it sends hexadecimal code. In this case you must contact technicians. They can read this code and will know what is wrong there.
Just for info: I have found out that original HDD for this unit has part number P000244000. Maybe it will help you to obtain some other HDD for tests.
Sorry I can not tell you more about this oldie.

Satellite Pro M40: screen stays dark untill Windows has fully loaded

Hello to all on here.
I have a problem with my laptop. My laptop is a Satellite Pro M40.
When I turn on my laptop I have found the back light will not come on... the screen will stay dark untill it has fully loaded into Windows. I have checked all of my power options and there all fine. Even if I can get to the Bios screen its impossible to read the txt due to no backlight. I have tried holding the Fn & F7.. noy joy.
Does anyone have any ideas?
Richard

Hello Richard
I didnt see something like that before and I am little bit confused why you can not see BIOS settings but running OS. Usage of FN+F7 key combination will not help because this option works just under Windows and not under DOS level.
If possible try to connect external monitor and test it again. Anyway I dont believe that you can fix it on your own. Try please to contact Toshiba authorized service partner in your country. Explain the situation and you will see what they will say.
If you find out something please let us know. It will be really interesting to know why this happen.

Re: Satellite Pro A200 - Won't boot with 4GB RAM

Hi,
I've installed 2 x 2GB, but it seems it doesn't work. The funny thing is that when running just one memory strip (so 2GB) it works, when running both it doesn't work and it freezes. These are the Samsung 2GB 2Rx8 PC2 - 6400s - 666 - 12 - E3
Ive' installed the latest BIOS update (64bit v2.60) for the Satellite Pro A200 and I am running Windows 7 64bit

Hi caribman
What Satellite Pro A200 you have exactly?
I ask this because some A200 models were equipped with Intel 943GML chipset and these models support 2GB only!!!

Satellite Pro A200 failing to connect with iphone hotspot via wifi

Apologies if I get some of the technical jargon wrong but I pretty useless when it comes to IT issues.
I have a Satellite Pro A200 and had problems connecting to various wifi connections.
The computer would see the wifi connection and connect to it but i wasn't able to connect to the internet.
The office issue has now been sorted by our IT support guy (security settings on the new router we too complex for my PC or something like that) but he wasn't able to solve the problem of not being able to connect to my iphone to use the 'hotspot' feature via wifi.
Does anyone know a way of solving this or is it a simple fact of the laptop being too old and really needs updating?
Thanks for any assistance anyone is able to give.

> Does anyone know a way of solving this or is it a simple fact of the laptop being too old and really needs updating?
This is not a question of notebook age
As far as I know not all mobile phone providers support this
You should firstly ask your mobile provider if you can use the tethering function.
If this would be supported my mobile provider, then you have to connect the iphone to the notebook firstly
For that youve got two options: you could use the BT connection (in such case check if notebook supports BT too) or via USB cable provided with the iPhone.
(PS: As far as I know tethering is support by iOS3.0 and higher)
After the iphone has been connected to the notebook you need to enable the tethering on iphone.
Under Settings -> Network you should see the option internet tethering this need to be enabled.
Now you should be able to see that in Network & sharing Center of the control panel.

Satellite Pro M10 freeze and crash with some programs

Hi
I have a Satellite Pro M10...
a few weeks ago it's freeze and crash with some programs like wmpayer, messenger... I delivered it in the authorized agent and they had not detected no problem.
Already I formatted it some times, but the problem continues.
Some ideia of what it can be?
Thanks

Hello,
Sounds to me like you could have a Motherboard problem. Formatting it takes away the chances of it being a software issue. Try taking out 1 stick of ram and testing it with that. If it continues to crash, take out that stick and try the other one. If it does it with both RAM then those are ok. HDD is not the culprit, so now it could either be processor or MB. Find a program to measure the heat of the notebook and run some heavy programs to make it overheat. If the temperature goes up and then it crashes, it could just be overheating. If it continues without overheating you either have a problematic CPU or MB. Hope this helps.

Satellite Pro A - Screen hinges compatible with M series?

Similar Messages

Maybe you are looking for