Satellite Pro A100 PSAA3E: What WLan driver should I use?

What wireless software should i download to make my built in wireless work.
I have downloaded almost all of them but they install and i see no wireless there :S
Help please?

Hi
The Satellite Pro A100 were equipped with the different WLan cards; two different Wlan cards are possible; Intel and Atheros.
All necessary WLan drivers can be found either on the Toshiba European driver page or on the Toshiba WLan portal.
http://aps.toshiba-tro.de/wlan/
Check both drivers. One of them will work for sure!
Regards

Similar Messages

  • Satellite Pro A100-080: NVidia display driver crashing during 3D Games

    Hello,
    i have some problems with the display driver since i've bought the notebook 9 month ago. I've tried to install every new driver published on the toshiba homepage but no driver is running stable on my system.
    The problem is that my notebook is crashing with bluescreen during playing 3d games and my windows vista tells me its the display driver causing the crashes.
    I had the previous version of the driver installed several month ago and i feel it was more stable than the current version. But unfortunately i've lost the files for that one, but i would prefer any functional driver for this notebook.
    My Notebook
    Satellite Pro A100-080
    Modelno. PSAASE-00G004GR
    Manufactured on 2007-02-20
    Thank you all in advance for yr assistance
    bgrds
    Robert

    Hi,
    below you will find a small list of games i've tried on my system.
    Supreme Commander
    Halflife 2 (including several mods)
    World in Conflict Demo
    Warhammer - Mark of Chaos
    Warhammer - Dawn of War
    X3
    I've also tried to play the older games on compatibility mode, but this doesnt run. At least one of those games should run properly on my system, but none is running.

  • Satellite Pro L50-B05D - need WLan driver for Windows 7

    Hi
    I bought a *Toshiba Satellite Pro Model L50-B05D psktaa-05d001*.
    I needed a new machine as I was starting a new job the next day.
    During an install off office 2013 the machine in one of its reboots had a catastrophic error.. and refused all recovery attempts. around 19:00 at night...
    I needed an operational machine for work...the next day
    I pulled out my Windows 7 and proceeded to reconfigure machine and install Windows 7.. The Machine is operational BUT I cannot get the Wireless LAN functioning... for the Model I have there does NOT appear to be a Wireless lan driver...
    The network card functions BUT not wireless LAN..
    Can anyone please advise what is the correct Wireless LAN driver for the machine...
    Thanks
    Harpoon2222

    Hi
    Your notebook Satellite L50-B05D belongs to the PSKTAA series and this series was released in Australia only.
    But the similar notebook series Satellite L50-B PSKTAE was released in Europe.
    Therefore the drivers from Toshiba EU driver page should be compatible.
    Visit this page:
    http://www.toshiba.eu/innovation/download_drivers_bios.jsp
    Here choose.
    Notebook
    Satellite
    Satellite L
    Satellite L50-B
    PSKTAE
    Win 7 64bit
    Note: there are three different Wlan drivers: Intel, Atheros, Broadcom

  • Satellite Pro L20 (PSL25E) - Need WLAN driver

    Hello, new at this!
    Satellite Pro
    L Series
    L20
    PSL25E
    Windows XP
    Ive never had a Lan Driver or the ability to connect to a WiFi Network. I currently use a BT voyager, however that has broken. Is there anywhere I can download either Lan Driver or Wireless Lan Driver that will allow connection to my WiFi Network without the use of the external BT voyager.
    Im sorry if this doesnt make sense. Ive tried various links to no avail.
    http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
    http://aps2.toshiba-tro.de/wlan/?page=downloads
    Thanks for your time. Regards.

    Yep, this looks like the correct driver! A message has just appeared though:
    The software you are installing for this hardware:
    Intel Pro/Wireless 2200BG Network Connection
    Has not passed Windows Logo testing to verify its compatibility with Windows XP.
    Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
    Is this a normal message?
    How reliable are the Toshiba downloads?
    Im using this link:
    http://aps2.toshiba-tro.de/wlan/?page=downloads

  • What hard drive should I use

    SHould I buy a SATA or EIDE Hard Drive? I have been reading problems people have been having with the SATA. I am not going to be using raid. Just one drive. Will I need to do anything special to install windows. Will my window disk do everything such as it does on an EIDE?

    ...I dont have a floppy drive for those disks ...
    ...then you'll save a lot of grief if you get a PATA drive...  
    ...why no floppy drive?..Dell isn't calling the shots on your rig, are they?..  
    ...it's a small investment...

  • What hard drive should i use in my iMac G5

    Hi,
    I have a first Gen. iMac G5 which the hard drive gave out.  Is there a specific apple certified brand of SATA hard drives to replace the original or does any SATA hard drive work?
    thanks,
    Nick

    If you have 10.6.8 on your machine it is not a G5.    Go to Apple menu -> About This Mac.  If it is says Intel, that's what you have.  There is no such machine as an Intel G5.    G5s were CPUs made by IBM.   The older hard drives only supported 1.5 Gbps, so you may need to make a specific jumper setting to keep newer hard drives running slower.    Ask the hard drive vendor, or go with one sold by http://www.macsales.com/

  • What External Drives should I use to work with HD footage?

    I just got a new camera that shoots HD and I will be editing weddings with it. I need to figure out how and where to put my HD media that I can work with in Final Cut Pro. I have a Lacie external drive but am not sure if there is a better option for me.

    Don't use USB for video. Use FireWire. Even FW400 has plenty of bandwidth to handle HD video; FW800 is even better. If you expect to be compositing 3, 4 or more video clips from the same drive, then FW800 is the way to go, perhaps even a FW800 RAID-0.
    USB2 would appear to be fast enough however there is more to it than just the raw speed measured in a lab. The USB protocol cannot keep up with the streaming demands of digital video. It may work for awhile, particularly on very short clips, but somewhere along the line you will run into trouble.
    Most good FW drives today support FW800 and FW400. If you are seriously doing weddings and using FCP, don't skimp on your drives - look into GTech, Caldigit, Wiebetch. And get at least one additional drive for backup - you will need it.
    And BTW, you're going to need more than 1GB RAM - upgrade to 2GB minimum, 4GB if you can

  • Connecting a Satellite Pro A100 to a TV?

    HI there.
    I've got a Satellite Pro A100-PSAA3E and I'm trying to connect it so that it displays on my tv.
    Ive tried connecting it through the S-Video out port on my laptop to the TV via a S-Video to SCART cable and neither the laptop or the tv are picking anything up.
    I've tried every input on my TV, even rebooted the laptop with the TV already on and set to every input.
    I have also tried using a VGA-video cable and have gotten no further, even after trying everyhint i can think of.
    As far as I am aware I have the latest drivers and have tried everything I can think of.
    When ever i go into Display-Settings-Advanced-Displays, the box for the TV is completely greyed out and unclickable.
    Can anyone help?

    Hi
    From my own personal experience some s-video-to-scart cables supports the wrong pin assignment.
    I have connected my notebook to the TV but I got either only a white/grey display or nothing. I have changed the cable and bought only an s-video cable.
    This helped to solve the issue.
    One tip; on some TVs you need to enable the s-video option. Furthermore you have to use the FN+F5 key combination to switch the display on the TV
    Bye

  • Cannot use WLAN connection with my Satellite Pro A100

    Toshiba Satellite Pro A100-830
    Netgear DG834G
    Can not use wireless connection. While using "Config Free" to find wireless device the popup 'this connection is controlled by other software'. I do not know what it means and which software controls the connection. I have other laptop which is duly connected by wireless connection. I am ok with wired connection.
    I do not know much about technicalities and thus seek help if any reader can.
    Thanks
    Kris

    >Can not use wireless connection. While using "Config Free" to find wireless device the popup 'this connection is controlled by other software'
    You should not use the ConfigFree for the Wlan configuration but either the own Vista configuration options or the WLan configuration tool like Intel ProSet Utility or Atheros Clint Utility. It depends on the WLan card what utility can be used.
    Intel card -> Intel ProSet Utility; Atheros WLan card -> Atheros Clint Utility
    I assume the message +this connection is controlled by other software+ appears because one of the options mentioned above controls the WLan.

  • What external Hard drive should I use for Final Cut Pro?

    Hi:
    I have a Mac Pro and I'm planning to work with HD. What external hard drive should I use?
    PD: I have a NVIDIA on a PCI Express graphic slot.
    Thanks,
    Cabezon

    You'll need to be much more specific; there are 20 or 60 different kinds of high definition. Some require nothing, some require superfast RAID, some require specialized hardware support.
    bogiesan

  • Satellite Pro A100 - Where can I find the ethernet controller driver?

    I recently changed my operating system from Vista to XP and I am not able to find a the necessary driver for the ethernet controller in my Satellite Pro A100 PSAAPE.
    Does anyone know where I can get this driver from?
    Thanks!

    Hi!
    You can install the driver if go to device manager and select the Ethernet card. Right click on it and select update driver. Choose the advanced installation where you can choose the driver directory yourself.
    Then you can install the driver! :)
    Bye

  • Toshiba Satellite Pro A100 PSAAPE Need Device Drivers

    Hi, I was wondering if anyone may be able to help. My father has been given a Toshiba Satellite Pro A100 (Model Num PSAAPE-00T00KEN) that someone has tried to do a fresh install of windows XP Professional sp2 on. The problem is all the device drivers have been written over and there is no driver disc with the laptop. After looking on the Toshiba website I'm having trouble locating the drivers for this exact model. Could anyone point me in the direction of said drivers or a link to them and also in what order I should download them.
    Thanks for you help, Mick

    Satellite Pro A100-03R (PSAAPE-00T00KEN)
    Mick, the Toshiba drivers and utilities for that European model are here.
    Be sure to follow the order of installation recommended.
       Installation Instructions for Windows XP
    -Jerry

  • Satellite Pro A100-830 with 4Gb of memory but BIOS tells me I only have 3Gb

    I have a Satellite Pro A100-830 and I bought the maximum allowed memory for it which is 2x2Gb which in my world totals 4Gb. When I put the dimms in on their own in either slot, the BIOS reports 2Gb. Well done bios! When I put them both in together, I only see 3Gb in the bios!
    I did find this link on the Crucial website. http://www.crucial.com/kb/answer.asp?qid=4251
    It would suggest that page files, devices etc take up memory on you system at start up, before the OS kicks in I assume. If you have not got the maximum memory installed, you should see the total memory. If you have got the maximum memory installed then you will not see the memory in use by the page files etc. Why would this be? Why would you see 2Gb if you only have 2Gb but then see only 3Gb if you have 4Gb because of the system!
    Can anyone shed any light on this subject and either qualify or reject the information in this link. Do I need to replace the memory and/or the pc?
    Thanks
    Mark

    Why would windows have an effect on what the bios is reporting since the bios has not even loaded the OS at this point.
    I am happy that system hardware (nic etc) might take some of the resources, it confirms that here (http://www.transcendusa.com/Support/FAQ/index.asp?axn=Detail&LangNo=0&FAQNo=337) but not 1Gb in total!
    BTW, it is Transcend memory and I put it into my Tecra A8 and the BIOS reported 4096Mb as expected. When we put a 1Gb and 2Gb in the A100-830, it reported 3Gb as expected. (3143680 to be precise!) When both 2Gb were installed it reported EXACTLY the same, not even an extra byte. According to that link above, you might expect to only see 3.6Gb out of 4Gb which would be OK, but I am not happy about a machine that needs 1Gb for system resources!
    So unless you can explain how windows is effecting the bios reported installed memory, then this machine is gone! The bios should not care if you have windows, linux, dos or anything else for that matter.

  • Satellite Pro A100-080 does not boot - stays dark after 3 beeps

    Hello,
    after one week off, the Toshiba Satellite Pro A100-080 (PSAASE-00G004GR, 4 GB RAM) of my children does not boot anymore.
    When powering on the system, it *beeps 3 times* (one longer, two short beeps), then the HDisk light shortly blinks "blue" and then nothing more happens. A/C, Power and Batterie LEDs are "blue", which seem to be the OK state.
    No other useful help, as the display stays dark.
    We had upgraded to 4 GB MEM (Kingston) one year ago and I already tried the former used 1 GB (included when purchased) or the 2 x 1 GB replacement from December 2007, but same status with those modules. So it is not
    a defect memory.
    I hope it is not the mainboard, probably only the included NVIDIA GeForce Go 7600 graphics adapter?
    Does anyone have an idea, what might be the issue?
    Thx for a short help.

    Hello
    Generally speaking this kind of beep codes are hardware related or with other words hardware is malfunctioning. So I think its a hardware problem and an ASP should check your notebook to identify the reason of this.
    On the Toshiba website you will find a list of ASPs:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider

  • Satellite Pro A100 - Resume from Sleep with IR multimedia remote control or keyboard

    Hi Guys
    I have dedicated my Satellite Pro A100 to be a media center that sits under the TV and can play networked media and DVD's etc.
    This is using Vista.
    The set up I want is that the lid is shut 24/7 365 and when I want to use it I just press "SLEEP" or power button from the remote control or keyboard and it fires up ready for action.
    POINT TO NOTE. I successfully did this with my OLD Tecra M3. However was too slow for media center and vista
    However I have set the power settings as I want etc, shut lid do nothing, and enabled hybrid sleep (preferred sleep).
    Now I CAN put it to sleep with the multimedia keyboard or remote control. BUT can I wake it?...NO!. I have thought of everything possible....gone to device manager and made sure all the options for the remote and the keyboard and the USB reciever are set to WAKE FROM SLEEP. The only thing to wake it is the power button - which defeats the purpose of it being sat there like a dvd player.
    when awake the remote and the keyboard function fine - I have made sure the batteries are recharged.
    I have the latest BIOS and speaking of BIOS's there are no S3 power options I noticed , but then there werent on the M3 and that worked fine in terms of sleep and waking with the IR.
    I come to the forum because although I know some older systems will not work with vista - IF the M3 will work - I am sure the twice as new and powerful A100 will.
    Has anyone had this before - what have I missed it must be staring me in the face.
    Thanks in advance.
    P.S Also of late the touch pad has been playing up i.e the left and right clickers swap function so one second your working as normal next minute you left click and the right clikc menu appears. Reset BIOS - rebuilt - reinstalled synaptic - no difference.
    When I worked in support for a big company when this started happening it wasnt good news - is it bad news?

    Hi
    Im not quite sure why it doesnt on your Sat Pro A100 and why it works on M3.
    But fact is that Satellite Pro A100 doesnt support the FIR (Fast InfraRed) port and the
    Tecra M3 supports the Fast InfraRed port.
    Maybe this could be the reason why you cannot enable the notebook using the infrared multimedia remote control.
    Greets

Maybe you are looking for