Satellite Pro A120 cannot boot up when printer is connected

Hi I have a brand new Toshiba Satellite Pro A120 but am having a very strange problem.
I installed my printer - Epson Stylus Photo R300 but now the laptop wont boot up if the printer is turned on. When I turn it on the Toshiba screen comes up ok, then the Windows XP screen comes up with the black background when the blue bar goes across to load Windows but its all faded out and the laptop just freezes and will not power up!
However if you turn the printer off and re-start the laptop it boots up fine!
Its definitely the printer that is causing this as its only when I have it turned on.
It never caused this problem with my old PC that was using Windows XP too.
Any help with a resolution would be greatly appreicated.
Thanks
Adam.

Hello Adam
I am afraid there is not much to do. Friend of mine has the same problem and the fact is that Epson chipset is pretty bad and it gives completely wrong information to the system. Because of that notebook is confused and can not start.
I can just recommend you to use USB hub and I hope it will work. I dont know if your notebook can boot from USB device but if this option is available please disable it.
Good luck!

Similar Messages

  • Re: Satellite Pro A120 - Cannot access the BIOS and install the Win XP

    Hello
    Ive a Toshiba Satellite Pro A120, Ive installed a Linux operating system on it, and uninstalled it.
    When I come back to the Windows XP OS, I could no more access the Bios (event the i press F1, F2 ) and the computer could not boot the windows XP SP2 CD too but it boots the windows XP 2001 CD
    Any one could help me please

    Thank u jeffrey for your help, ;;;;;or the BIOS i'll try later....for the boot, i tried many times,,,, i screen to shoose the boot appears, and when i select the cd boot it works with the windows xp 2001 SP1, but with windows SP2 it doesn't boot,,,, even though i tried many cds of win sp2 ,,,, so each time , to install windows sp2 , i have to install SP1 then upgrade to SP2 and it takes much more time... i precise that few months ago it was proprly working with the WIN XP SP2 CD
    best regards

  • Satellite Pro A120 - Cannot get the PCMCIA card to work

    OK i have a problem with my Satellite Pro A120's (xp service pack 2) cardbus.
    I use the cardbus slot to add firewire conections via a IEEE 1394 cardbus card and have been doing this a long time. The other night my comp went into hibernate with the card still in the slot and still in use and when i tried to use it the next day the card was not working at all.
    So i thought the had died on me and brought another one, this one to be exact [http://www.newegg.com/Product/Product.aspx?Item=N82E16839314003] .
    When i plug the new card into the slot windows starts the installation add new hardware thing but does not find the driver, there is none on the provided CD and it does not conect to windows update to find one ethier. So the new card does not work and does not get installed, it just shows up with ! next to pci device.
    I have looked everywhere on the internet to find the driver, read the manual etc.I even did a fresh install of windows so it might find the drivers but nope.
    The only thing i can think of is the slot does not except 32 bit cardbus but in my manual it says this:
    "The computer is equipted with a pc card slot that can accomedate a type II card. Any pc card that meets industry standards can be installed. The slot supports 16 bit pc cards, including pc cards 16 multifunction card and cardbus pc cards. Cardbus supports a new standard of 32 bit pc cards."
    Any help please
    Thanks

    Thanks for your help but i ahve already tried this including searching the net for the driver and no luck. I've also tried microsoft update but no luck.
    The reason i can't find the drivers is because the cardbus card is supposted to be plug and play but windows doesn't have them.
    The good news is i found out my old card was 32-bit just like the new one so my laptop is compatible. I don't want to just go and by another card incase that one won't work.

  • Satellite Pro A300 - Cursor constantly moves when external mouse connected

    Hi there
    I have a Satellite Pro A300. When I attach a mouse directly by USB the cursor is constantly moving. I also have a mouse attached via a Toshiba docking station and that works perfectly.
    It doesn't matter which USB port I use or whether the laptop is connected to the docking station or not, or whether it is running on mains or battery power.
    I thought it was the mouse that was the problem so I went and bought a new one but the problem is persisting.
    Actually, while I have been writing this post, it has stopped doing it and then started again! Very frustrating.
    Can anyone help?
    Thanks
    Susib

    Hi
    How about the touchpad does the cursor moves and jumps using the touchpad?
    Try to disable the touchpad while using the USB mouse check if you can notice a difference
    How about BIOS?
    Do you have the latest version installed?
    Check this!

  • Satellite Pro A120: Need all drivers and easyguard for Win 7

    Hi!
    I have a Toshiba Satellite Pro A120, which I purchased back in 2007 and I am very satisfied with it.
    It had Windows Vista Business, but recently I installed Windows 7 and this is where my dilemmas began.
    My touch pad doesn't work correctly, its scroll feature doesn't work anymore, to be precised. I installed the latest ALPS touch pad driver, but the problem remains.
    Then, when I checked the system, I noticed two devices that are listed and it said that there are no drivers installed for them. I cannot find out which devices are those and where to find the drivers.
    Here are they:
    1st: ACPI\TOS6208\2&DABA3FF&1 Driver not installed!
    2nd: ACPI\TOS620A\2&DABA3FF&1 Driver not installed!
    And my third problem is regarding Toshiba's sets of programs and utilities.
    My laptop came with Toshiba Easyguard, with theft protection and other Toshiba programs, and now I lost them all. Is there any way I can get them?
    I have to say that I have no intention of going back to Windows Vista, so any help would be appreciated.
    Thank you all for your answers and help!

    Hi
    In my in my humble opinion the additional touchpad features and other devices dont work correctly because the installed drivers are not designed for Win 7 and possibly are not fully compatible with Win 7.
    Who knows if the Win 7 drivers would be released for Sat A120 series we will see
    At this time I didnt find special Win 7 drivers for A120.
    But if found some Win 7 beta drivers on US page:
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
    Maybe you are lucky man and some drivers would run on your A120.

  • Re: Satellite Pro A120 - CD/DVD drive doesnt work anymore

    Hi, I have a Satellite Pro A120, and keep on having problems with my CD/DVD driver. I spoke to few of you on the phone, the fix it solution on http://support.microsoft.com/kb/314060 seems to do the trick for a couple of hours and then I am back to square one.
    Today, I think I have reached the end of my possibilities, the solution above no longer works, I have a message that says that it doesn't work for the specifications of my PC.
    In the meantime, something must have happened because my webcam, that I have since 2007, no longer works either, and in spite of the fact that I have tried time and time again to install those drivers, the PC just won't allow me.
    It's a dead end really...
    And... yes, I have done the business of going to Device Manager, disable the CD/DVD driver facility etc....
    Thanks for your help
    Hotxbun

    Is the drive shown properly in device manager?
    When you remove CD/DVD drive from the device manager after restart it should be recognized again. Can you use it after doing this?
    Have you tried to reinstall OS using Toshiba recovery CD/DVD?

  • Satellite Pro A120-145: yellow exlamation mark in the device manager

    Hi all,
    I have a Satellite Pro A120-145 running Win Xp Pro fully patched and up to date, I have a yellow exlamation mark against "serial" in non plug and play in device manager (when i click show hidden devices).
    Could anyone tell me which driver is needed for this? I don't want to use the recovery disc as I have done a custom install to get rid of excess baggage which is included on the disc.
    thanks in advance.

    That troubleshooting guide that Juan28 posted is really good. If the driver of the unknown device is already available (i.e. after the recovery CD installation) you might find your way through.
    In case you can't locate a suitable driver for your unknown device on your Laptop, you could try and download a freeware called "Unknown Device Identifier" from this site:
    http://www.zhangduo.com/udi.html
    This program will allow you to locate the device ID and make a search with it on the Internet.
    Hope this will sort things out.
    Regards
    electrochain

  • Satellite Pro A120 goes through configuration every time turned on

    Please help for the last month every time i turn on my laptop Satellite pro A120 with vista business pre-installed it configures which takes about an hour.
    After it finally turns on it repairs itself and then when on the McAfee warns it needs updating.
    I have tried installing updates, I have tried turning off the automatic updates, only thing i haven't tried is throwing it out of the bedroom window.
    If you can help please keep your language simple as i don't have much technical knowledge.
    Thanks in anticipation.

    Can you explain how it 'repairs itself' ?
    To rule out a software/Windows problem, you can reinstall Windows back to its factory state by running "Recovery".
    But you need to backup your data (documents, music, emails, etc..) before running Recovery. It will wipe/delete C: Drive.
    To run Recovery, hold down the Zero (0) Key when you power-on the laptop.

  • Satellite Pro A120 - Second hard drive on secondary IDE channel

    Hello
    I have a Satellite Pro A120 xp sp3.
    I've been trying to get it to recognise a 2nd hard drive on the secondary ide channel but it won't. Cd drive has been removed and replaced with one of these, the with the pata to sata interface.
    [http://newmodeus.com/shop/index.php?main_page=product_info&cPath=2_27&produc ts_id=245]
    The second hard drive is a seagate sata 500 GB drive. Drive is spinning and recieving power but not showing up in storage management or device manager.
    In the Bio's (uptodate) it shows me this but won't let me edit it.
    Drives I/O
    Built in HDD = serial ATA port 0
    CD rom = Secondary ide (170H - IRQ 15)
    To me the hardware is capable of supporting two HDD's as long as you remove cd drive but it seems like the bio's is locking me out of deselecting CD rom on the second IDE channel.
    Please could some one point me in the right direction to resolve this.
    Thanks
    Zander

    Thanks for the help.
    Ok I followed what you said and this is what happens.
    Uninstalled CD drive in device manager.
    boot to bios with out 2nd hard drive in the slot. Bios shows no secondary IDE channel or hard drive
    As soon as I push in the 2nd hard drive caddy and boot it says CD error, doesn't show in windows or device manager. Bios shows CD drive again. Also the CD drive is reinstalled in the device manager.
    Tried it with original HDD with operating system on it in the 2nd hard drive bay and it won't boot, looks for bootable device but can't read it.
    Why does it only see the cd drive! Annoying.
    Any more ideas?

  • Satellite Pro A120: What is a part number of mother board

    Hello,
    I want to know the part number of my Toshiba Satellite Pro A120-223 systems board, I've been trying to look for it on actual board, but I can't seem to find it written anywhere.
    Is there a database of part numbers anywhere online..? I've been searching but failed to find anything.
    I want to know (for future references) if I'd be able to upgrade my current mobo of 533MHz FSB and really poor graphics onto a higher end system should I suddenly become completely fed up of my current one. I've been reading about the core 2 duo mobile processors, and their performances, but they're 800FSB, I can't upgrade without a total mobo replacement.
    Any thoughts..?
    Thank you.

    > Is there a database of part numbers anywhere online..? I've been searching but failed to find anything.
    Dont know such database maybe the authorized service provider in your country can help you. Usually the technicians has an access to such informations

  • Satellite Pro A120 - can I update to Windows 7?

    I have a Satellite Pro A120 (model PSAC1A-045005 - purchased in Australia) which I wish to update to Windows 7 from XP
    The Toshiba Australia site says it is not compatible with Windows 7 and the upgrade from Windows XP to Windows 7 is unsupported.
    Looking on the web I've found a couple of sites that say they have drivers for the computer. One address is as follows:
    http://driver-toshiba.blogspot.com/2009/12/toshiba-satellite-pro-a120-psac1-for.html
    Presumably these drivers would be unofficial. Would they be reliable or would it cause problems?
    I use a wireless router so would be particularly concerned if it caused problems with this

    Hi
    I installed Win 7 on my old notebook and was able to find some necessary drivers.
    The notebook (from another manufacturer) is not officially Win 7 supported but it runs pretty well
    I spent some time for driver searching but after that was able to get most of the necessary drivers.
    I think you should test it on your A120 thats the one and real solution for you
    Greets

  • How install the LAN driver for Satellite Pro A120

    Actually, my problem is that i didnt know how to install the lan driver on my Satellite Pro A120 to connect throug the net.
    The issue that theres no installation to do to complete the install.
    And theres other issue that i need the Ethernet Controller
    My laptop was vista OS installed, But i change it and put Windows XP instead
    Plz help me

    Thats very easy to install the LAN driver.
    On the Toshiba website you can search for it:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download drivers
    Select the right notebook. In your case its the Satellite Pro => Satellite Pro A Series => Satellite Pro A120.
    And then choose at operating system Windows XP and at Driver type LAN Driver.
    Click on search and you will get the right driver.
    Download and install it. How this works did Jimi said.

  • Satellite Pro A120-10W - Function keys not working since hard drive wipe

    Hello,
    I have a Satellite Pro A120-10W running Windows XP Pro SP3, and have just had my hard drive wiped, because of viruses. Everything seems to work fine, but I cant use the function keys to change the brightness etc. I have looked at various help forums however most seem to give answers for Windows 7 or vista. 7
    Can someone help please?
    Thanks in advance.

    Hello
    As you can see in other threads, you need special drivers/tools for FN keys to get them working because there is no Windows standard driver for these keys.
    Anyway, you have to download Common Modules as Akuma wrote. After installation the keys should start working again.
    You can download the tools on official Toshiba website.
    If you have problems with installation or it was successful, just post some feedback. ;)

  • Why do I get the message  "cannot get mail" when trying to connect to microsoft exchange server.

    Why do I get the message "cannot get mail" when trying to connect to ms exchange server?

    Hard to say. Has it ever worked? Maybe your account has mobile e-mail disabled. Maybe ActiveSync isn't set up properly on the server. maybe the correct ports are not open on the corporate firewall.
    You will have to talk to your IT department.

  • Satellite Pro L10 - Unmountable Boot Volume

    My Satellite Pro L10 loops at the boot process. After the Windows XP splash screen, the following error messages comes up: .... Unmountable boot volume... Technical Information: Stop: 0x000000ED...
    I know this is nothing exceptional and doing a full recovery would solve the problem. But I don't want to loose the data (which of course is not backed up). I tried a Windows XP disc, but it won't boot from the cd/dvd drive pressing F12 or <0> and changing the boot order....
    Can anyone help please?

    Hi
    Hmm the error message unmountable boot volume appears mostly if the HDD cannot be recognized during the booting. Why? Well, possibly the HDD malfunctions or the master boot record is faulty!
    If you dont want to recover the notebook you could try to boot from the XP CD (press C button immediately after notebook powering) and to start the repair console.
    In the repair console you could use the command chkdsk /p and after this you could fix the master boot record using the command fixboot or/and fixmbr.
    If it does not help, the new OS installation is you last resort.
    Ps: if you want to backup the data you can try to remove the HDD and try to connect it via external USB HDD controller to another computer.

Maybe you are looking for