Satellite Pro A120: What is a part number of mother board

Hello,
I want to know the part number of my Toshiba Satellite Pro A120-223 systems board, I've been trying to look for it on actual board, but I can't seem to find it written anywhere.
Is there a database of part numbers anywhere online..? I've been searching but failed to find anything.
I want to know (for future references) if I'd be able to upgrade my current mobo of 533MHz FSB and really poor graphics onto a higher end system should I suddenly become completely fed up of my current one. I've been reading about the core 2 duo mobile processors, and their performances, but they're 800FSB, I can't upgrade without a total mobo replacement.
Any thoughts..?
Thank you.

> Is there a database of part numbers anywhere online..? I've been searching but failed to find anything.
Dont know such database maybe the authorized service provider in your country can help you. Usually the technicians has an access to such informations

Similar Messages

  • Satellite M50-159: What is the part number of the origanal AC power adapter

    My power adapter has broken and up until now i have been using a universal adapter but the connection is loose and takes a while for the orange light to turn on.
    My question is what is the part number of the original AC adapter that came with this laptop. I have just ordered what i thought was the correct power adapter part number was PA3468E-1AC3 but the connecter did not fit into my laptop even though the toshiba website said this power adapter was compatible.
    Please help
    Alex

    Hi dear friend,
    you had the wrong partnumber. What you need is PA3283U2ACA (K000028790) which is the right one. Heres a link where you can check the connector of the AC-adapter:
    http://www.sparepartswarehouse.com/Toshiba,Laptop,Part,K000028790.aspx
    I hope you will get what you need. :)
    Greets

  • Satellite Pro A300D - What is the model number for the keyboard?

    My husband managed to dislodge a keycap on my keyboard, and broke the white scissor clip that holds hit on...(don't ask me how)
    He spoke to the authorised service centre here in Norway, and they sent us replacement scissor clips (actually they sent an old non-functioning keyboard) but the clips are of a different design to the ones on my laptop.
    I was wondering if anyone has an idea of the model/serial number of the keyboard used in the Satellite Pro A300D-151 (PSAK9E) so I can get the correct replacement part.
    I really don't want to have to replace the whole keyboard when it's just 1 of the scissor clips that is broken...the laptop is only 5 months old.
    Here are some photos of the scissor clip in question & the where it attaches to the keyboard (sorry about the quality)
    Link:[http://img31.imageshack.us/gal.php?g=1000683o.jpg]
    Thanks
    notsure

    Hi
    Sorry buddy but its not possible to exchange some single keys on a keyboard so in this case you must replace the complete keyboard. But normally this should not be so difficult.
    Either you exchange the keyboard yourself or you sent the notebook to the authorized service provider.
    The model number for the keyboard is not known to me but contact your ASP!! They can order all Toshiba parts and they should know the right part number.
    Bye

  • Satellite Pro A120 - What Toshiba processes can be excluded from start-up?

    My old A120 has over 50 processes showing in Task Manager before I even open a browser or any other application.
    This seems far too many for a machine with a 1.46 GB processor (and half a gig of RAM).
    Many of them are Toshiba processes, and look worryingly as if they are associated with hardware operation.
    Is there a list anywhere of Toshiba processes which can safely be turned off - and which advises how to do this?

    Hi
    Every notebook has preinstalled different software and therefore different processes are running in the background of the OS.
    There is no general answer what processes could be disabled.
    Fact is that Toshiba notebook supports many different additional features which need the additional software.
    If you dont want to use features like FN buttons, Toshiba control buttons, etc then you could disable the process responsible for this feature.
    If you dont know exactly what a certain process do, then goggle simply for some details. There are many websites with different database which includes information about Windows background processes.
    Then you could access the MSCONFIG and in the Startup tab you could disable some processes just for testing.
    In worst case if something would not work you could enable it again.
    Cheers

  • What is the part number of MB of Satellite A300-1L0 PSAGCE

    Hi
    I've got Toshiba A300-1L0 Model NO.PSAGCE-03100UGR.
    But there is a problem with graphic adapter ATI 3450 (M82 chipset). After installing proper drivers I got blue screen when Windows starts - and it is written that file ati2....dll gives the problem. The same situation happens both on Windows XP and VISTA.
    What is the part number of mentioned notebook mainboard? I'm planning of selling every part of this notebook that is why I would like to know the part number.

    Hi
    Not sure exactly if the part number is the same but the PT10G_6050A2171501_MB_A03 motherboard is compatible with Satellite A300-1QD, A300-1GC and A300-1L0
    But I dont know why the part number is so important you can describe the motherboard as a mobo for Satellite A300 PSAGCE series.
    There are different Satellite A300-xxx which belongs to the PSAGCE family and this motherboard would be compatible with all these notebooks

  • Satellite Pro A120 - Second hard drive on secondary IDE channel

    Hello
    I have a Satellite Pro A120 xp sp3.
    I've been trying to get it to recognise a 2nd hard drive on the secondary ide channel but it won't. Cd drive has been removed and replaced with one of these, the with the pata to sata interface.
    [http://newmodeus.com/shop/index.php?main_page=product_info&cPath=2_27&produc ts_id=245]
    The second hard drive is a seagate sata 500 GB drive. Drive is spinning and recieving power but not showing up in storage management or device manager.
    In the Bio's (uptodate) it shows me this but won't let me edit it.
    Drives I/O
    Built in HDD = serial ATA port 0
    CD rom = Secondary ide (170H - IRQ 15)
    To me the hardware is capable of supporting two HDD's as long as you remove cd drive but it seems like the bio's is locking me out of deselecting CD rom on the second IDE channel.
    Please could some one point me in the right direction to resolve this.
    Thanks
    Zander

    Thanks for the help.
    Ok I followed what you said and this is what happens.
    Uninstalled CD drive in device manager.
    boot to bios with out 2nd hard drive in the slot. Bios shows no secondary IDE channel or hard drive
    As soon as I push in the 2nd hard drive caddy and boot it says CD error, doesn't show in windows or device manager. Bios shows CD drive again. Also the CD drive is reinstalled in the device manager.
    Tried it with original HDD with operating system on it in the 2nd hard drive bay and it won't boot, looks for bootable device but can't read it.
    Why does it only see the cd drive! Annoying.
    Any more ideas?

  • Re: Satellite Pro A120 - CD/DVD drive doesnt work anymore

    Hi, I have a Satellite Pro A120, and keep on having problems with my CD/DVD driver. I spoke to few of you on the phone, the fix it solution on http://support.microsoft.com/kb/314060 seems to do the trick for a couple of hours and then I am back to square one.
    Today, I think I have reached the end of my possibilities, the solution above no longer works, I have a message that says that it doesn't work for the specifications of my PC.
    In the meantime, something must have happened because my webcam, that I have since 2007, no longer works either, and in spite of the fact that I have tried time and time again to install those drivers, the PC just won't allow me.
    It's a dead end really...
    And... yes, I have done the business of going to Device Manager, disable the CD/DVD driver facility etc....
    Thanks for your help
    Hotxbun

    Is the drive shown properly in device manager?
    When you remove CD/DVD drive from the device manager after restart it should be recognized again. Can you use it after doing this?
    Have you tried to reinstall OS using Toshiba recovery CD/DVD?

  • What's the Part Number for an IdeaPad S12 recovery disk?

    Hello,
    I have an IdeaPad S12 (NVidia Ion). The recovery partition is gone. What's the part number for the recovery disk?
    I mainly work with ThinkPad systems and Lenovo has an excellent part number system that covers just about every part you could imagine on a ThinkPad laptop. I assume Lenovo is also using this or something similar for it's consumer-line laptops. Sadly, Lenovo doesn't treat it's consumer laptop line with the same dignity as the ThinkPad line, and no customer support agent would tell me the part number, so I'm resorting to the forum for finding it.
    Please help.

    Hi and welcome,
    the ideapad as consumer-line has no part list ....as the thinkpads have...
    regards KalvinKlein
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • The LCD for my macbook air model number MC965LL/A (purchased 2011) is broken , where  can I get new one and what is the part number for it ?

    The LCD for my macbook air model number MC965LL/A (purchased 2011) is broken , where  can I get new one and what is the part number for it ?

    You can find them at vendors like ifixit and instructions to install.
    http://www.ifixit.com/Mac-Parts/MacBook-Air-13%22-Mid-2011

  • What is the part number for License 8.6

    I have call manager 8.6 and I need to add new license , can anybody tell me what is the part number?
    dose it depend on the ip phone model ?

    If you are a partner you can refer to the ordering guide:
    http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/uc_og-ucl_cucm_mcs_cer_CUxAC_cime_sme-edcs840769.pdf
    CUCM licenses are user based, so which license are you looking at CUWL, UCL?
    This should help:
    http://www.cisco.com/c/en/us/products/unified-communications/unified-communications-licensing/index.html

  • What is the Part number for the plastic rear cover of Pavilion G70 ?

    I send my notebook Pavilion G70 for manintenance and the tecnician lost its rear plastic (between the Display cover and the Base), so I want to know what is the part number and  where can I bought it?  I will be very grateful by any help because I could not find this part at HP site.

    Hi Werlang,
    I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • What is the part number for labview fds cd media only

    what is the part number for labview fds cd media only - i'll purchase on line but can't find the part.

    Randy's definately right - you should talk to your local rep. before makig any purchases, but here's some numbers to start you off:
    LabVIEW FDS for Windows2000/NT/Me/9x
    776670-03 English
    776670N-0313 German
    776670N-0314 French
    LabVIEW FDS for Power Mac OS
    776690-03 English
    LabVIEW FDS for Sun Solaris
    776680-031 English
    LabVIEW FDS for HP-UX
    777010-031 English
    LabVIEW FDS for Linux
    777756-03 English
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

  • What is the part number for the fan for the dv7 2270 us

    what is the part number for the fan for the dv7 2270 us

    Dear Kamat,
    The HP manual (http://h10032.www1.hp.com/ctg/Manual/c01689926.pdf) says that the Fan/Heat sink assembly (depending on the graphics subsystems memory type), can be the following:
    516876-001 (for discrete)
    516331-001 (for UMA)
    I dont know what graphics subsystem type is the DV7-2270US (VM189UA), but it doesnt matter in this case, becouse, if you search for those two part numbers, no one of them, is used in that computer. Check it your self:
    http://h20141.www2.hp.com/Hpparts/part_where_used.aspx?mscssid=5FB90592D9AD45D39C93EDC2771FE844&Sear...
    and
    http://h20141.www2.hp.com/Hpparts/part_where_used.aspx?mscssid=5FB90592D9AD45D39C93EDC2771FE844&Sear...
    CAN ANYBODY ELSE TELL US WHAT IS THE PART NUMBER FOR THE FAN OF A HP PAVILION DV7-2270US (VM189UA) ??
    Regards,
    Nicolas

  • Satellite Pro A120 - can I update to Windows 7?

    I have a Satellite Pro A120 (model PSAC1A-045005 - purchased in Australia) which I wish to update to Windows 7 from XP
    The Toshiba Australia site says it is not compatible with Windows 7 and the upgrade from Windows XP to Windows 7 is unsupported.
    Looking on the web I've found a couple of sites that say they have drivers for the computer. One address is as follows:
    http://driver-toshiba.blogspot.com/2009/12/toshiba-satellite-pro-a120-psac1-for.html
    Presumably these drivers would be unofficial. Would they be reliable or would it cause problems?
    I use a wireless router so would be particularly concerned if it caused problems with this

    Hi
    I installed Win 7 on my old notebook and was able to find some necessary drivers.
    The notebook (from another manufacturer) is not officially Win 7 supported but it runs pretty well
    I spent some time for driver searching but after that was able to get most of the necessary drivers.
    I think you should test it on your A120 thats the one and real solution for you
    Greets

  • How install the LAN driver for Satellite Pro A120

    Actually, my problem is that i didnt know how to install the lan driver on my Satellite Pro A120 to connect throug the net.
    The issue that theres no installation to do to complete the install.
    And theres other issue that i need the Ethernet Controller
    My laptop was vista OS installed, But i change it and put Windows XP instead
    Plz help me

    Thats very easy to install the LAN driver.
    On the Toshiba website you can search for it:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download drivers
    Select the right notebook. In your case its the Satellite Pro => Satellite Pro A Series => Satellite Pro A120.
    And then choose at operating system Windows XP and at Driver type LAN Driver.
    Click on search and you will get the right driver.
    Download and install it. How this works did Jimi said.

Maybe you are looking for

  • Download error on my ipad

    experiencing download error of a movie on my ipad

  • How do I remove the white space around a graphics I have placed?

    I am working on a pc. I have placed a graphic into my document that has a white box around it. I would like to get rid of the white box so only the graphic is seen. How do I accomplish that?

  • SQL Developer 3.2 error

    in monitors with panoramic resolutions like 1366x768 the auto complete window helpper in the code editor don't show the first 10 items when the list of objects (tables) is long.

  • Filter with OR operand

    I have two characteristics in the cube. Personnel Area and Personnel Sub Area. I like to build a BEx query that shows Personnel Area equals 0001 OR Personnel SubArea equals 0045. I cannot use filters directly, because it is trying to perform a logica

  • Import error when I try to import photos

    I am trying to import photos from a card into Adobe Bridge CS6.  I have never gotten an import error before today, but now I can't seem to import anything. Any ideas why?