Satellite Pro A200-16N: Can I use Recovery CD after upgrade to Vista

Hii!
Im thinking of upgrading to windows vista on my Satellite Pro A200-16N, and i've ran the windows vista upgrade checker from the microsoft website and it says my system will support windows vista so im ok on that.
The problem is, if my laptop were to break or something like that at some point, will my recovery CD's that was supplied from toshiba still work on the laptop with windows vista?
Will they return the laptop to windows xp or since my laptop has a different operating system will they not work?
Also...
Whats the deal with BIOS?:S
I dont understand!
If i were to upgrade to windows vista should i update my BIOS before or after upgrading to vista?
As i have to download the new drivers before upgrading yes?
Thanks!

Of course the Recovery CD will work.
The Recovery CD will set always the notebook back to the factory settings. This means that the whole HDD will be formatted and the Toshiba image will be installed.
> Whats the deal with BIOS? I dont understand!
> If i were to upgrade to windows vista should i update my BIOS before or after upgrading to vista?
In my knowledge this notebook was already delivered with Vista therefore you dont need to update the BIOS if you want to install Vista again.
Some A200 Satellite series needs a BIOS update if you want to use the XP.
In such case its advisable to update the BIOS to XP version firstly and then to install X OS.
Best regards

Similar Messages

  • Satellite Pro A200-1NB - Can I use Windows 7 64bit?

    This is my laptop: Satellite Pro A200-1NB Part Number : PSAE7E-00V00CG3
    http://eu.computers.toshiba-europe.com/innovation/jsp/autoDetect.do?service=EU&ACTION=PROCESS_DETECTION& TYPE=FORWARD&SOURCE=SMP&COUNTRY=&QSA=TRUE&MODEL=Sa tellite+Pro+A200&SERIAL=97348001K&service=EU&LOCAL E=&OSBUILD=7600&SUB_TYPE=SMP&OSBITSIZE=32&PANUMBER =PSAE7E-00V00CG3&ERROR=0
    Can I use it on Windows 7 x64? I see that there are not all drivers present in 64bit version so I want to know if everything will work property with 64 bit Windows?
    Thanks for reply
    Mario

    Hi buddy,
    Youre right. According the Toshiba European driver download for Windows 7 64bit are not all drivers available. I have checked the downloads for Vista 64bit and therefore all drivers you need are available.
    Vista and Windows 7 drivers are similar so you can try to use the Vista 64bit drivers. The most Vista drivers also work on Windows 7.
    Furthermore if something will not work you can use other drivers from Satellite A300 for example. This notebook supports Windows 7 64bit and the drivers should be similar I think.
    Good luck! :)

  • Satellite Pro A200 - New ODD ignors the Recovery disk

    Hi,
    _Satellite Pro A200 PSAE4E Windows XP_
    I started getting bad “Not-Ready” system errors on the original ODD. Toshiba Disc Creator report: TSSTcorp CDDVDW TS-L632H TO01. I tried the FW update, but that did not help.
    I replaced the ODD with a new one from Amazon. Toshiba Disc Creator report: TSSTcorp CDDVDW TS-L632H SC04. The new ODD is listed as suitable in the User Manual - it’s the same model as the original. The new ODD works perfectly for normal use within XP. But when I attempt to use the Recovery Disk, it is ignored and XP always boots from the HDD. And when I press F12 during boot, the new ODD is not listed.
    Can you assist me to get the ODD recognised at boot time please?
    Thanks.
    Mike

    Thank you for your replies.
    To be exact, I see the following at boot time:
    F12 shows only HD and LAN boot options.
    F2 shows the usual 4 options, HD, ODD, Floppy and LAN.
    But since I have no floppy either, I suspect the F12 list is the correct one - and it fails to show an ODD option.
    @C3PO
    Yes, Ive tried all those ideas, and I have the latest A200 BIOS.
    @Akuma
    So it is insufficient to have the correct model number? It should be explained somewhere that even if you have the correct ODD model, it may still not work.
    Please can you give me a link to Toshiba, so that I can obtain a suitable ODD. I'm in England.
    Thanks for your swift assistance.
    Mike

  • Satellite Pro P300-26U - Can I use a second HDD?

    Satellite P300 family support raid0 and double HDD. All model? User manual of 26U don't say any word about this. Model like P300-1BP has double HDD.
    Can someone help me? I want to buy a P300-26U in Italy.
    Thanks.
    Guido

    Hi
    The Satellite P300 series doesnt support RAID!
    There is NO RAID controller on the motherboard.
    But you are right; the Satellite Pro P300-BP supports 2 HDDs but this does not meant that it would support RAID!
    Furthermore you should know that P300 series supports different hardware specifications.
    This means that not all P300 would be able to use 2 HDDs!!!
    It could be possible that Satellite Pro P300-26U is not able to use 2 HDDs even though the Satellite Pro P300-BP support 2 HDDs.

  • HT1386 I can't use my iphone after upgrading to IOS5

    Can someone help?  I can't use my iphone 3gs after upgrading to ios5.

    I have iphone 3 GS.  I upgraded the software to ios 5 and the phone is now can't be accessed.  All I can see is the Gray screen says Iphone.  It ask me to set it up, choose your country, wifi, etc.  when I did that, it always stop at the page where it says "Apple activation server is down, please try it again".  Tried so many times but the same messages kept showing up.  Connect it to Itunes, itunes said there is no sim card installed.  I went to AT&T to get the new simcard and it still saying the same thing.  don't know what's wrong with it.

  • Can't use Home Sharing after upgrade to 4.3 for my IPAD

    Hi,
    I just upgrade my IPAD to 4.3 and ITunes to 10.2. But I can't use the Home Sharing Application. It shows "Home Sharing could not be activated because an error occurred (-3259)". Anyone knows about the detail on this error?
    Thanks!
    Ed

    Welcome to the Apple Discussions!
    If you glance down the list of topics in this Apple Discussions forum you will see a few threads that already cover this topic quite thoroughly. Have a read through those.
    The main thread;
    http://discussions.apple.com/thread.jspa?threadID=2776515
    Dah•veed

  • Can't use Airport Express after upgrading to Leopard

    I use Airport Express for wireless printing and AirTunes via powered speakers/hifi. It was working very reliably until I upgraded to Leopard. Now, I am unable to use Airport Express. I get the blinking orange light, but when I scan with Airport Utility, Airport Express is not detected. Manual setup is grayed out, so I can't set it up at all. I am using Airport Utility Version 5.2.2 (522.3), and there does not seem to be any updates or patches to apply at the moment. I have tried on my iMac G5 and MacBook, with the same result on both computers.
    I am also reading that many others are having problems with Airport Express after upgrading to Leopard, perhaps not with my specific hardware configuration, but this is very disappointing.
    I am open to suggestions to try a few things to get it working, so any help is appreciated.
    Message was edited by: a j

    From the Mail menu, select "Preferences". Hit the Accounts tab. Select the Account. Under Account Information, reapply the user name and password.
    Check with the provider if the account needs authentication. This is in the Advanced tab. Usually just a repeat of user name and password.

  • Can't use my scanner after upgrading to OX Maverick

    After upgrading my scanner is not working probably. I have an elder HP F388 all in one printer & scanner. I can scan files, but after saving the page it is blank. Does anyone has idea how to solve this problem ?

    I have iphone 3 GS.  I upgraded the software to ios 5 and the phone is now can't be accessed.  All I can see is the Gray screen says Iphone.  It ask me to set it up, choose your country, wifi, etc.  when I did that, it always stop at the page where it says "Apple activation server is down, please try it again".  Tried so many times but the same messages kept showing up.  Connect it to Itunes, itunes said there is no sim card installed.  I went to AT&T to get the new simcard and it still saying the same thing.  don't know what's wrong with it.

  • Satellite Pro A200 - Where to get new recovery disk?

    On Thursday of last week ended up with the Blue page of death, tried to use the product recovery disk and found to my horror it has a large crack in it .
    Can anyone tell me were I can upload a new disk from?
    Have managed at cost to get the laptop up and running but from windows vista have had to install windows 7 Originaly the laptop came with windows XP. Any advice greatly appreciated.

    Hello
    If your notebook was delivered with Windows XP, you cant order a recovery disk online. In this case you have to contact an authorized service provider in your country. The guys should be able to order a new recovery disk for you.
    Here you can search:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider
    Good luck! :)

  • Satellite Pro L850-1L4 - Can't boot from Win 8 Upgrade Disc

    Purchased just under 2 years ago. Came with Windows 8.0 Upgrade DVD.
    I now wish to upgrade to Win 8 (then onto Win 8.1).
    No matter what I try (BIOS changes) cant get the DVD to boot. Under CSM boot (default for the laptop) it returns a non system disc error.
    I have tried the DVD in other PC drives which also results in the same error message.
    Other disks eg Windows repair & Tosh recovery disks all boot OK.
    So I think the disk must be faulty.
    My question is has anyone else had this problem or even successfully upgraded using the Toshiba supplied DVD?. Getting hold of Toshiba to get replacement DVD seems an impossible task especially 2 years down the line.
    Any suggestions?

    Hello Tonny
    Thanks for the speedy response. This is my first post and I have already made a blunder the laptop model is L850 whoops (my excuse I'm a septuagenarian!)
    For clarification I have the latest BIOS. The boot mode options are CSM (default) and UEFI. Only under UEFI is the secure boot option available but the laptop wont operate set to UEFI. I did set the secure boot off before returning to CSM. This laptop doesnt actually support UEFI, it seems the option is there just to boot a UEFI capable OS. I did try booting the Disk under the UEFI option (with the secure boot on & off) but it didnt work.
    So yes the BIOS was set to its defaults with no effect. I have found no web intelligence, generally or with Toshiba, about these upgrade discs.
    The thread you provided is interesting and one element about BIOS reset to default I tried but without success.
    Thanks again for your response

  • Satellite Pro A200 - external screen resolution

    Hi,
    Does integrated graphic card Intel GMA X3100 in my satellite pro A200 notebook can support 1920x1200 resolution?
    I want to buy an external 24" monitor. Will it work in the native resolution?
    Thanks!

    Thank you Eldorado :)
    > {quote:title=Eldorado wrote:}{quote}
    > What does the Satellite Pro A200 manual said?
    > Did you check it???
    Yes, I checked it but there's no supported resolution listed :| and I'll check the manual again... Nope! nothing about graphic card at all! No resolutions... nothing.
    Maybe I'm missing something?!?
    > {quote:title=Eldorado wrote:}{quote}
    > The notebook supports these CRT resolutions on external TV:
    I have s-video and RGB connector (D-sub) on my notebook and I suppose there's no difference if I'm plugging external CRT or LCD monitor?
    Thank you.

  • Satellite Pro A200: How to create Dual boot; Vista & XP using Recovery CD

    I have just purchased a Satellite Pro A200 lap-top, which was supplied with Product Recovery disks for both Vista and XP.
    The Vista licence specifically also licences XP.
    Can I set up a dual boot so that I can boot to either Vista or XP ? If so, how?
    I would also like, as a third boot, Red Hat Linux 9.
    Any comments ?

    Hmmm. Usually its possible to use two or more operating systems on the computer but as far as I know the Toshiba Vista Recovery CD formats the whole HDD during the Vista installation and this will lead to losing of the installed OS's.
    Im not 100% sure about the XP Recovery CD The newest CD called RECO doesnt include expert mode which allows choosing between different partitions.
    So I presume every usage of the Recovery CD will format the HDD and will erase the installed data. But of course you could try to install both OS and to check if the XP recovery CD allows choosing second portion for the OS installation.
    If it will not function it seems that you will need either an original Microsoft XP CD or the original Vista CD to use both OS.
    Best regards

  • What internal HD can I use on my Satellite Pro A200 PSAE1E-01700EN5

    I need to replace my laptop's broken internal HD. I was wondering, what internal HD can I get for Satellite Pro A200 PSAE1E-01700EN5?
    The only one available for me to order for cheap is 250Gb large, but will my laptop support it? I had 80Gb previously.

    I don't understand why you think your notebook is old generation. Between your A200 and my A300 is not much difference.
    Both use the same HDD. My Satellite A300 has maybe other hardware platform and thats all.
    I am 100% sure you can use 250 GB HDD in your Satellite A200.

  • Product recovery problems on Satellite Pro A200

    Hi
    I have a Satellite Pro A200. It is running very slowly and sometimes it freezes up when I log on.
    Also the homepage has been hijacked and I have tried several anti spyware programs and they have not worked.
    I have the product recovery disc but the problem the DVD rom drive has stopped working.
    The light is on but it will not open unless I use the manual release.
    I have removed it and checked the connections but it seems o.k.
    The DVD/CD rom has disappeared from the device manager and does not show up under hardware.
    I have tried system restore but this also will not work.
    Is there anyway you can use the product recovery software if you boot from a USB key?
    I have tried restarting the computer and choosing boot from CD but it will not give me that option.
    I have looked in the bios and the only boot options that it gives are harddrive, CD rom, land and FDD

    > Is there anyway you can use the product recovery software if you boot from a USB key?
    No, this Toshiba Recovery disk cannot be copied to USB flash memory stick and used for OS installation. Im afraid this would not work.
    But if youve got an Microsoft Windows CD you should be able to create an bootable USB flash memory stick. In internet you will find many useful step by step instructions how to create such bootable USB stick.
    But booting from USB flash memory stick should be definitely possible since the BIOS supports following bootable devices:
    USB FDD, HDD, ODD, Network(LAN), USB Memory

  • Satellite Pro A200 - Can't install Windows 7 due missing CD/DVD driver

    Hello, I have a Satellite Pro A200, PSAE4E-046018N5 and I'm trying to install Windows 7 but I can't pass from step one because it doesn't found a driver:
    A message box saying: A required CD/DVD drive devise driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now.
    -What to do?
    CD-ROM is a HL-DT-ST DVDRAM GSA-T20N ATA, the actual driver have version 6.0.6002.18005 (date:2006-06-21)
    Best regards
    /peter

    Hi Peter,
    Do you try an upgrade from Vista to Windows 7 at the moment? If yes please try a new and clean installation of Windows 7. Does this work?
    Another question: Is your CD/DVD drive working properly or is it listed with yellow exclamation mark in device manager?
    In your case I would try to remove the drive from device manager and restart the notebook. After this the drive will be recognized automatically.

Maybe you are looking for

  • Error creating Service Desk Message in Satellite System

    Hi all We have two satellite system from which I want to create a Support Message. With my current profile/role and can do it from one system and not from the other system. I get "Error in local message system, message xxx not complete". I dont think

  • How to connect two monitors using macbook pro?

    Hi, I have a Macbook Pro through which I want to extend the displays to two individual monitors. The two monitors should show two different windows which is opened through my macbook. I have observed that macbook has only one mini display port throug

  • Certificate problem on nokia 5233

    During the time of installation of july palayer and many apps its showing certificate expeired. Give me a sollution.. Device is nokia 5233 Solved! Go to Solution.

  • SUN JES Web Server 2005/04 6.1SP5 in a sparse zone on Solaris 10 ?

    Can I run the web server inside a sparse zone ? Strictly speaking I would like to know that about every single one of the JES components but the Docs are quite miracoulous about that one ;)

  • SAP MAPPING for EDI 857

    Hi All, I have to send EDI 857 Information from SAP. Could you please let me know which IDOC should i use to achieve the functionality. I appreciate if anybody can send me the mapping document of EDI 857 from SAP. Thank You, Suresh