Satellite Pro A200-1MI - Need driver for PCI memory controller

I have the Toshiba Satellite Pro A200-1MI(PSAE7E) having a problem with PCI Memory Controller on my notebook.
When I go to Device Manager it shows question mark in the tab Other Devices and when I go there, it's yellow ?(question mark) and !(exlamation mark) at PCI Memory Controller. I took and downloaded all the drivers from your site:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
for XP but I am not sure what type of drivers do I have to install for PCI Memory Controller, is it bios driver or something else? I just need to know what to install to overcome that problem with my Device Manager and PCI Memory Controller.
Thanks in advance!

Hello akibono
I presume you have installed clean WXP on your notebook and now you want to install all drivers, tools and utilities. Am I right about that?
Anyway, after WXP installation you must install all drivers, tools and utilities in specific installations order. After doing this everything should be OK and every hardware component will be properly configured.
Please install all stuff as follow:
WXP
Chipset driver
Display driver
Sound driver
Modem driver
Storage manager
LAN driver
Touchpad driver
WLAN driver
Toshiba Assist
Flash Media driver
Webcam driver
Hardware setup
Controls
And so on
I hope everything will be OK.

Similar Messages

  • Satellite Pro A200 PSAFCA: Need Lan and display driver for XP

    Hey
    please help me!
    I have just installed XP on my new satalite pro, but i have had trouble with the drivers.
    At the moment I have installed most but from this site i can't seem to find a driver that will help my network card, nor my video NIVIDIA drive...
    any suggestions would be very valuable

    The Satellite Pro A200 PSAFCA is not known to me. I know only the Satellite Pro A200 PSAE1, PSAE4 and PSAE7. So could you please confirm your Pro A200 series?!
    If you cannot find the single XP drivers on the Toshiba page I would recommend checking the LAN and the graphic chip which is installed on the motherboard and use the XP drivers from the chip manufacture.
    If you need an graphic driver I would recommend using the drivers from the www.omegadrivers.net or www.laptopvideo2go.com site
    Regards

  • Satellite Pro A200 (PSAE4): DVD drive permanently blinking

    Hello,
    I have been using a Satellite Pro A200 (PSAE4) laptop for some time now without any major issues.
    My dvd drive (tsst crop TS-L632H) is no longer working for a few days now... More precisely, its LED is permanently orange blinking. Drivers are up to date. The eject button doesn't work either. No disc is inserted. The drive seems fine in the Windows device manager...
    If opened manually and if a disc is inserted in the drive, I can't see any data. Can't boot on the disc either.
    I'm running under Vista 32bit SP1 with the latest bios available on the toshiba website (2.40).
    Since I need to fix the frequently reported "black screen" issue before login prompt, using the windows installation disc
    Any help would be really appreciated.
    Thanks !

    Hi
    According to you page you are not able to boot from any CD or DVD, not even from the Toshiba Recovery CD.
    Am I right?
    To be honest, Ive no idea why such issue happened but in my opinion its related to the hardware malfunction and only the replacement could helps
    I dont know how old you notebook is but maybe the warranty is valid and you could replace it for free
    What do you think?

  • Satellite A100 - need driver for Mass Storage Controller

    Needed to use the recovery disc and now can not find driver for "Mass Storage Controller".
    according to device manager :
    Device Type : Other devices
    Manufacturer : Unknown
    Location : PCI bus 7, device 6, function 2
    suggestions, advise requested

    Your description is incomplete.
    What OS did you install?
    What notebook model A100-xxx do you have exactly
    You said you used Recovery disk is it right???
    I wonder why the unknown device appears in device manager if the recovery disk has been used. ?:|
    Recovery disk installs all drivers and usually no unknown devices should be visible in device manager

  • Satellite U840-113: Missing driver for PCI-Communications controller

    *Toshiba Satellite U840-113 - PSU4SE:* Win7-Prof-64Bit with original MS-DVD on new SSD completly new installed, RAID disabled, no RAID-Driver oder RAID-Software installed, internal SSD now as normal SSD in use, all drivers successfull installed - except for the following device: in the Device Manager I find under the "Another Devices" the position *"? PCI-Communications controller (single)".*
    Who can help me to locate / find the correct driver for this "PCI-Communications controller" ???
    What ist this? Do I need this?
    The System seems to run perfectly; shall I disable this Device?
    Many thanks for helpful answers!!!

    Hi
    Maybe this Toshiba article could be helpful:
    http://www.mytoshiba.com.au/support/items/faq/222
    The PCI Simple Communications Controller is part of Intel AMT Management Engine Interface and is related to networking on your computer.
    You will need to install the Intel(R) AMT Management Engine Interface driver.

  • Windows 7 driver for PCI Simple Controller

    I installed the Lenovo Windows 7 Professional upgrade on my R400 (7443-CTO) from Windows XP Professional.  The ThinkVantage tools repeatedly shows I need a driver for the "PCI Simple Controller".  I have been unable to find that driver on the Lenovo support site.  Any assistance to help resolve this issue would be appreciated.
    Solved!
    Go to Solution.

    To create shortcuts or folders under the startmenu in Win7 you can rightclick "All Programs" under the startmenu. Then you can choose "Open" or "Open all users". If you choose "Open" you will be able to change the startmenu for the current user account only and when you select "Open all users" you can change the startmenu for all user accounts on the computer. The startmenu in Windows is basically just folders and shortcuts stored in a folder on your computer. The startmenu for all users are stored under "C:\ProgramData\Microsoft\Windows\Start Menu" and for the current user under "C:\Users\<useraccount>\AppData\Roaming\Microsoft\Windows\Start Menu"
    So let's say you want the "Thinkvantage" folder under the Windows startmenu where it should normally be after installing Lenovo toolbox and then the shortcut for Lenovo Toolbox under that folder. Then you can rightclick "All Programs" under the startmenu and select "Open all users" from the context menu. You should then see a explorer windows with the folder "Programs". If you open the "Programs" folder you will see the same contents as you see under the "startmenu -> All Programs". Since this is the area for the common startmenu for all user accounts there might be some more entries under the startmenu compared to what you see in this windows. By selecting "Open" instead of "Open all users" as explained above you should find the rest. So when you rightclicked, selected "open all users" and then doublecliked on "Programs" then you can rightclick somewhere in that window and choose "New -> Folder" from the context menu. Then you can give the folder the name "Thinkvantage". Then open the "Thinkvantage" folder and create a shortcut for Lenovo Toolbox. After you have done these steps you should find the Thinkvantage folder under "All Programs" and then the shortcut for Lenovo Toolbox under the Thinkvantage folder. This is how you can easily change the startmenu in Windows to add, remove or change entries under "All Programs".
    Normally after installing Lenovo Toolbox it should be under "All Programs -> Thinkvantage" and not sure why that is not the case for you, but then you can add it manually like explained above. When i installed Lenovo Toolbox a shortcut and the Thinkvatage folder was created under "All Programs" during the installation. Also if you install the "System interface driver" and "Hotkey feature set" you can start Lenovo Toolbox by pressing the blue thinkvantage button on your computer. Unless you already installed "System Update 4.0" i would recommend to do so. System Update will find the drivers and software from Lenovo for your computer and give you a list where you can select those you want to download and install. System update will then download and install the drivers and software you selected and you don't have to download and install each one of them manually one by one. It will save you a lot of time. You can find system update for Windows 7 using the link below.
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73695
    User Access Control is a new feature of Windows that started with Windows Vista so therefore you won't find it in XP. Only Vista and Windows 7 got UAC.
    Yes it's a bit late over here I'm sure i will enjoy the weekend and hope you will do the same.

  • Satellite Pro A200-1MI - no sound under WXP

    I downgraded from Vista to XP and after that I have no sound, I installed sound drivers from official Toshiba driver's site and still nothing. Also tried this one: http://www.programs.pl/program,739,1.html.
    Anyone have some sollution to this problem?

    Finally, my sound works! I'm not sure if i remember everything but i'll try to explain how did i do that:
    1. Open your Device manager and do everything as Miseik wrote.
    2. If your sound still doesnt work open Device manager and find Unknown device (or something like that) in System device.
    3. If you dont have Unknown device in System device there must be PCI device under Another devices tab. Right click on it and chose Uninstal. Uninstall it and restart your notebook. Now, you will probably have Unknown device in System device tab. (we are still working in Device manager. I have another language on my notebook so I'm trying to translate)
    4.Double click on Unknown device and chose upgrade driver or install driver (button is found under Driver tab) . Chose "No, not now" ( or sth like that). Now chose Install for seznam... (for advanced users). Now check "Dont search, I will chose driver to install" (it's last option, I rly dunno whats there in english). Now click on botton "from floppy". Go to folder where you installed driver. (probably C:\\Program files\Realtek\InstallShield) Click on file HDA and than click on button Open. Click on OK.
    5. While installing it will ask you for some files, they're found probably in C:\\Program files\Realtek... or in folder with downloaded driver.
    6.After installing it will show blue window (Sound manager). then it will ask you for a file called AGRSM.sys I dunno whats that but sound works without it. Restart your notebook and sound should work now.
    I hope this will help to every1 who has problems. If not, keep trying like me, you can be lucky ;-) .
    Thanks to Miseik, i wouldn't be abble to make it without your post :-)

  • Satellite Pro A100 (PSAACE) - Display driver for Windows 7

    Hi,
    my A100 works in Windows XP correctly (video: ATI Mobility Radeon X1600), but in Windows 7 video is standard graphic 4 MB? The required driver in Toshoba-Downloads (95MB!) doesn't work - no compatibility hardware? So Windows 7 is in virtual env. slooooowly...
    Can somebody help me?
    Thanx.
    Minnikon

    Hi Minnikon,
    And why does the display driver from Toshiba page not work? Do you get an error message or something else? What happens exactly?
    Generally speaking the chipset driver should be installed firstly. Then you can install the display driver from the Toshiba page.
    Check this!!!

  • 2nd Request - PCI Memory Controller for ThinkPad T500 2081-CTO OS Vista 64bit

    Evidently the PCI Memory Controller driver is not installed on my ThinkPad T500 2081-CTO OS Vista 64bit and shows up as an error when running the Lenovo System Tool Box.
    Searching this forum I found one psot as follows BUT thisis for a T-200 laptop.
    Re: Driver for PCI Memory Controller
    Options 
    ‎02-25-2009 06:59 AM
    You need the driver for Intel Turbo Memory.  Only Windows Vista can use Turbo Memory, so we only have a Vista version for the driver:
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67820
    Is this driver appropriate?
    Do I need the PCI Memory Controller driver .. and if so where do I find it for my laptop?
    Thanks.
    Solved!
    Go to Solution.

    I would suggest that you forget about turbo memory. Intel quit talking about it and they have not released a driver since 2009. That is 2 years before service pack 1 was released. I ran tests and I was never able to measure any improvement with a card installed. As far as I am concerned, it is just something else to break and interfere with other components.,

  • Need ATI XP driver on Satellite Pro A200-15G

    Hi,
    I'm italian so my english will be not very well :)
    I've installed XP on my toshiba Satellite Pro A200-15G.
    I've searched the display driver for this model of notebook on this toshiba site, but i didn't find it.
    Where i can find it?
    Ah, another thing: i've installed xp without update bios for xp... is necessary to update it?
    Last thing (for the buyers of a satellite/satellite pro a series): what is the autonomy of your notebook's battery (in various modes and in various SO)?
    Thanks.
    Bye

    Hi,
    if you need a display driver then go here:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    or especially for ATI cards you can go here:
    http://www.omegadrivers.net/
    Regarding BIOS: yes, if you want some things on your machine working properly then update your BIOS to the XP version.
    Hm, battery lifetime... should be about 1 1/2 to 2 hours
    But I am not sure, it depends from so many things.
    Greets

  • Cannot install the XP Modem driver for Satellite Pro A200

    I'm a local network admin for Newbold College. We have new A200 laptops and we need XP Pro on some of them. I have tried to install the modem driver as one of the last drivers downloaded from the european support site. I also tried to Canadian site as well.
    The driver install program doesn't seem to do anything. I tried to manually install the driver from one of Windows modem Agse/Toshiba software modem, but I have com port issues and I can't quire the modem.
    Can anyone help me please!!!!!!!

    Hi
    What to say; I have checked the Toshiba Europe driver page and found all necessary and important XP drivers for the Satellite Pro A200.
    Please note that the Toshiba European driver page provides XP drivers for 3 different Sat Pro A200 series!!! There is PSAE1, PSAE4 and PSAE7 series.
    Please choose the right one!!!!
    Furthermore you will find an installation instruction txt file on the Tosh page.
    In this file you will find a right and important installation driver order!!! Please follow these steps!!!
    I dont know exactly why you get the modem com port problems but I assume that a new XP and driver installation should solve this strange issue.
    Good luck

  • Satellite Pro A200 PSAE7: Where to get the ATI driver for Win XP

    Hi,
    I have bought Toshiba Satellite Pro A200 PSAE7 and it was with Vista on from the beginning. I decided to upgrade (/downgrade) it to XP but there's problem with driver to graphic card (Radeon HD 2600 Series).
    I can't find anywhere ati drivers (actually I found it on ati.amd.com site, but on this forum I read that Toshiba drivers are modified so that Radeon won't be overheating) and I'm wonderig if Vista ones will run on XP (I've downloaded all drivers but ati one)?
    ...and is it possible to downgrade my Vista to XP Pro through Miscrosoft site (or something like that) or do I have to reinstall it using my old copy (provided with old Toshiba)?
    Ps.
    Sory for my English
    Ps2.
    Is it so important to install drivers in proper order?

    > When trying to download driver from Toshiba web I get message:
    >"This software has not been officially tested and therefore must be at the users own risk."
    >I agree, but still can't download it.
    You have to switch the option to Accept!!! Then the button Download will be activated!!!
    >I found driver on ati site, but read somewhere that for Toshiba notebooks drivers are modified so that >graphic card won't overheat. Is that true? Or original drivers (of ati group) are as good as Toshiba ones?
    As mentioned in this forum, the original ATI or nVidia drivers are designed not for the notebook usage!!! The GPU drivers are designed for the graphic cards which are used in the desktop PCs!!! Such graphic cards are equipped with an own, big cooling module in order to prevent the hardware from overheating!!! The notebook GPUs dont support such huge cooling modules and therefore the drivers must control the performance and the temperature growth.
    regards

  • Satellite Pro A200-1MN correct sata contoller needed for xp install

    hi
    i thought i had the correct file for my xp install on my floppy but the windows install still can't see my hard drive
    i don't have the recovery media hence this problem
    Satellite Pro A200-1MN
    PSAE4E-01R00WEN
    i have it as 82801 sata ahci controller and ich8m storage controller 2850
    it doesn't seem to like them though, can anyone help?

    Usually this option you can find in advanced BIOS options and you can choose between AHCI and compatibility. Option is SATA controller mode.
    Anyway, it is better to install OS with AHCI mode and have full HDD performance.
    Download storage manager and there you will find folder called F6flpy.
    There you will find ICH8M_32bit folder with WXP sata driver.
    When you start WXP installation use F6 button to load SATA driver. After doing this HDD will be recognized properly and you will be able to continue WXP installation.

  • "Common module" missing for XP on Satellite Pro A200

    Hello everyone,
    I received my Satellite Pro A200 (PSAE7) laptop with a Vista OS.
    I have made a fresh & clean XP installation on it using the Toshiba's installation instructions document.
    Everything is working fine except my Fn+F6 Fn+F7 Fn+F8 hotkeys for Wireless and screen brightness.
    I have made a few search over the internet and I found that page :
    - http://support.toshiba-tro.de/kb0/TSB7401VB0003R01.htm
    Looks like that I need to setup "common module" installer in order to make work those hotkeys.
    But the problem is that the "common module" is not available on the driver page for XP ....
    If I change the OS type to Vista there is "Value Added Package" available but it's not compatible on XP ...
    I tried to download and setup a "common module" for Sat Pro A120 model but i got an "TVALZ" error during the installation ....
    Did Toshiba support forget to put online a "common module" installer for XP for Sat Pro A200 ??
    How can I make work my Fn+F6 Fn+F7 Fn+F8 hotkeys ?
    Any help will be really appreciated !
    Thanks,
    Can

    Hello darkmatterman,
    First of all thanks for you reply and for your tips about the Bios version (Vista vs XP).
    The first day I received my laptop on Vista OS, I already made a Bios update "the Vista compatible one". So my Bios is v1.70 actually.
    I will try monday morning to update the latest XP compatible Bios version which is v5.20...
    Do you know if it's possible to apply the latest XP bios upgrade on a bios which was already been upgraded with a Vista compatible version ?
    And if the XP comptabile Bios upgrade works, do you think that I will need to setup my fresh XP again (with all Toshiba drivers & utils setup order...) ?
    Regards,
    Can

  • Need help restoring Satellite Pro A200-1OJ to factory settings

    HI, my mum is selling her laptop and asked me to wipe it clean for her so im trying to restore to factory settings with a fresh OS install etc. Dont have a recovery disc with it and i've tried going through the advanced boot menu holding F8 when switching it on. Nothing works heres the details any help would be appreciated.
    Satellite Pro A200-1OJ
    Part Number : PSAE1E-01H008EN
    Key Features
    - Intel Celeron M processor 520 (1.60 GHz / 533 MHz Front Side Bus / 1MB 2nd level cache)
    - Genuine Windows XP Professional
    - 9 cell battery with over 5 hours battery life
    - DVD Super Multi (Double Layer) drive
    - 15.4" TruBrite WXGA TFT display 1,280 x 800

    > Dont have a recovery disc with it and i've tried going through the advanced boot menu holding F8 when switching it on. Nothing works heres the details any help would be appreciated.
    You can use either the HDD recover or the Recovery disk.
    If HDD recover does not work and if you dont have the disk then you could order this here:
    http://backupmedia.toshiba.eu/landing.aspx

Maybe you are looking for